I am running an OData query as follows:
someurl?expend=sometabelname($select=foo,bar,baz)
So the response is something like
{
odata.nextLink
[somedata]
sometabelname:{[somedata (foo, bar, baz]} //lets call this field "content"
sometabelname#odata.nextLink
}
When I try to call sometabelname#odata.nextLink I get the same result I got in "content". That means, at least I think, that there is no more data to fetch.
My question is:
Why does sometabelname#odata.nextLink is not null if there is no more content to fetch?
Do I even need to fetch more data sometabelname#odata.nextLink to is it guaranteed by the protocol to get all the pages for me of entities I specify in the expand argument (such as sometabelname?)
Related
I would like to understand better Firebase Dynamic Links because i am very new to this subject.
What i would like to know :
FirebaseDynamicLinks.instance.getInitialLink() is supposed to return "only" the last dynamic link created with the "initial" url (before it was shorten) ?
Or why FirebaseDynamicLinks.instance.getInitialLink() doesn't take a String url as a parameter ?
FirebaseDynamicLinks.instance.getDynamicLink(String url) doesn't read custom parameters if the url was shorten, so how can we retrieve custom parameters from a shorten link ?
My use case is quite simple, i am trying to share an object through messages in my application, so i want to save the dynamic link in my database and be able to read it to run a query according to specific parameters.
FirebaseDynamicLinks.instance.getInitialLink() returns the link that opened the app and if the app was not opened by a dynamic link, then it will return null.
Future<PendingDynamicLinkData?> getInitialLink()
Attempts to retrieve the dynamic link which launched the app.
This method always returns a Future. That Future completes to null if
there is no pending dynamic link or any call to this method after the
the first attempt.
https://pub.dev/documentation/firebase_dynamic_links/latest/firebase_dynamic_links/FirebaseDynamicLinks/getInitialLink.html
FirebaseDynamicLinks.instance.getInitialLink() does not accept a string url as parameter because it is just meant to return the link that opened the app.
Looks like there's no straightforward answer to getting the query parameters back from a shortened link. Take a look at this discussion to see if any of the workarounds fit your use case.
We are trying to get all ProductBOs from CatalogCategoryBO with following code:
final CatalogBORepository catalogBORepository = applicationBO.getRepository("CatalogBORepository");
final CatalogCategoryBO catalogCategoryBO = catalogBORepository.getCatalogBOByCatalogName(catalogName).getCatalogCategoryBOByName(catalogCategoryName);
final CatalogCategoryBOCommonProductAssignmentExtension assignmentExtension = catalogCategoryBO.getExtension(CatalogCategoryBOCommonProductAssignmentExtension.class);
return assignmentExtension.getSortedProducts(applicationBO.getDefaultLocale());
But this does not always work as expected. After debugging I found out that main reason is BusinessObjectRepositoryContext:
((BusinessObjectRepositoryContext)catalogCategoryBO.getContext().getVariable("CurrentBusinessObjectRepositoryContext");
which is different based on location from which we call given method (organization or channel).
The same problem is described here: https://support.intershop.com/kb/index.php/Display/IS-22604
Is there some workaround or better way to get all assigned ProductBOs from CatalogCategoryBO?
We are using Intershop B2C version 7.9.1.2.
One possibility is to call pipeline for getting products as suggested by Willem Evertse, another one is to fetch CatalogBORepository and CatalogCategoryBO within block of:
try (ApplicationContext applicationContext = application.forceApplicationContext()) {
// your code here
}
https://support.intershop.com/kb/index.php/Display/2X3516#Concept-ApplicationFramework-TheExecutionContextofanApplication
Yes, this is because the business objects can have different implementations depending on the context (application).
If you look at how the rest api does it (see ProductListResource) they call the ProductHandler (see ProductHandlerImpl) method:
getProducts(Domain currentChannel, CatalogCategoryBO category, String searchTerm, String localeId,...)
Only the category parameter is mandatory it seems, the other parameters can be null. The added benefit is that this code will call the Solr index (if u have it enabled) so it should perform better than running a query on the database (which is also a possibility).
How can I make certain parameters of the WordPress Rest API accessible to anyone without first being authenticated – for example, the page parameter doesn't work (where blog is a custom post type) in this query:
mysite.com/wp-json/wp/v2/blog?page=2&per_page=20
I've seen that in the past it's been possible to make these params available, for instance :
add_filter( 'json_query_vars', function( $valid_vars ) {
$valid_vars[] = 'offset';
return $valid_vars;
});
Is there any way to do something similar with today's version of the API?
For anyone who has the same problem, I've solved it. The page parameter is actually publicly available, offset is the one you need authentication for.
The reason the API didn't paginate was because the request url didn't have the paged query string set. Every time I tried to add it with the params option of the WordPress Node API, it didn't work:
wpapi.getNews().params('paged', 'paged').perPage( perPage ).page( pageNumber ).then(data=>
It didn't work because the request url created by the API seemed to always put the page parameter before the paged one, which resulted in paged being ignored when the query actually runs.
So in the end, I created a custom query (bit of a hacked way to do it, but it worked) like so:
Register the route:
wpapi.getNews = wpapi.registerRoute('wp/v2', '/news/(?P<customQuery>)');
Usage:
wpapi.getNews().customQuery('?paged&per_page=20&page='+pageNumber).then(data =>
Using the above, you can build any query, in any order you want. This helped me get the correctly paginated result. Also, we see 'getNews' here because I registered a route for accessing my custom post type called news.
I have a Dynamodb table with a few fields - my_id is the PrimaryKey. In the API gateway I set up a response with a method that takes in a parameter {my_id}.
Then I have an Integration Request mapping template that takes the passed in parameter and queries the table to return all the fields that match.
Then I have an Integration response mapping template that cleans up the returned items the way I want.
This all works perfect.
The thing I can't figure out how to do is if the parameter that is passed in doesn't match anything in the table, how do I get it to change from a 200 status into a 404?
From what I can tell when the passed in parameter doesn't match anything it doesn't cause an error, it just doesn't return anything.
It seems like I need to change the mapping template on the Integration response to first check if the params are empty and then somehow tell it to change the response status.
I can find info about this type of thing with people using Lambda, but I am not using Lambda - just the Dynamodb table and the API Gateway.
You can use Mapping Template to convert the response that you get from DDB and overrride the response code. You can get more details in the link https://docs.aws.amazon.com/apigateway/latest/developerguide/apigateway-override-request-response-parameters.html
If you are using cloud formation, you can do this by using below snippet
IntegrationResponses:
- StatusCode: "200"
ResponseTemplates:
application/json: |
{
"payload" : {
}
},
}
IntegrationResponses:
- StatusCode: "200"
ResponseTemplates:
application/json: |
#set($inputRoot = $input.path('$'))
#if($inputRoot.toString().contains("Item"))
$input.json("$")
#set($context.responseOverride.status = 200)
#else
#set($context.responseOverride.status = 404)
#end
Api gateway currently supports mapping the status code using the status code of the integration response (Here dynamodb response code). The only workaround is to use a lambda function which outputs different error messages that can be mapped using a error regex http://docs.aws.amazon.com/apigateway/latest/developerguide/how-to-method-settings-execution-console.html.
The situation
I'd like to use GA to track some serverside operations. That's why I cant make use of the GA JavaScript functions. But, as you might know, you can request the utm.gif right from your server. This already works fine.
The Problem
I'd like to trackt custom parameters. But I have no idea how to add them in the right format to the url-request
This one should do the custom parms. But I didn't get any results in GA.
utme=5(Init*load_success*http://www.mydomain.de)8(userstatus)9(fan)11(2)
Full list of params:
ref ts
utmac UA-XXXXXX-5
utmcc __utma=186215409.1789216404.1265552708.1280074861.1280493144.21;+__utmz=;
utmcs ISO-8859-1
utmdt Button
utme 5(Init*load_success*http://www.mydomain.de)8(mycustomvar)9(mycustomvalue)11(2)
utmfl -
utmhn mydomain.de
utmje -
utmn 1114675642
utmp button
utmr http://www.mydomain.de
utmsc -
utmsr -
utmul de-de
utmwv 4.5.7
not sure what's going wrong, given what you posted, but how about you write out what you want to send the traditional way (with javascript) and put it on a test page. Use firebug or whatever to grab the requested url that's built and compare it to what you have now.
The value of the utme gif Request parameter is encoded by ga.js--it's the only one that is, as far as i know.
Calling __trackEvent is the usual way to set the value of utme. These are client-side events though, which is no doubt why you are trying to set utme directly.
So if you just want to bind 5(Initload_successhttp://www.mydomain.de)8(userstatus)9(fan)11(2) to the variable utme, and you can't rely on user-behavior to trigger that binding, then here's what i suggest:
Pack your data into a 'custom variable' scoped to the page--this way, when the __trackPageview() is called, the value will be set.
Here's the analytics code required in your HTML to implement that:
The method signature for a custom variable:
pageTracker._setCustomVar(slot, // integer between 1 and 5, inclusive (just use '1')
name, // user-defined name for the custom variable
value, // string representing the value for the custom variable
scope, // you want '3' for page-level (an int, not a string though)
);
Within the HTML (order matter, of course):
pageTracker.__setCustomvar(1, "A Name", "A Value", 3);
pageTracker.__trackPageview();
A key point here is that the parameter 'value' can be set dynamically, so for the 'value' parameter, i guess you want to pass in 5(Initload_successhttp://www.mydomain.de)8(userstatus)9(fan)11(2)
Finally, here are the two key sources (Implementation Guide, Usage Guide) on Custom Variables from the GA Team