I have a Katalon Studio project, which is not working after I copied it to another computer.
It gives the following error message during execution:
SLF4J: The requested version 1.7.16 by your slf4j binding is not compatible with [1.6]
SLF4J: See http://www.slf4j.org/codes.html#version_mismatch for further details.
Caught: java.lang.IllegalArgumentException: Cannot find test case 'Test Cases/Mycase'
java.lang.IllegalArgumentException: Cannot find test case 'Test Cases/Mycase'
at com.kms.katalon.core.testcase.TestCaseFactory.findTestCase(TestCaseFactory.java:72)
at com.kms.katalon.core.main.TestCaseExecutor.<init>(TestCaseExecutor.java:87)
at com.kms.katalon.core.main.TestCaseMain.runTestCase(TestCaseMain.java:105)
at com.kms.katalon.core.main.TestCaseMain.runTestCase(TestCaseMain.java:97)
at com.kms.katalon.core.main.TestCaseMain$runTestCase$0.call(Unknown Source)
at TempTestCase1543911985430.run(TempTestCase1543911985430.groovy:22)
I use the same version of Katalon Studio in both cases. Path of the framework contains only unicode characters.
Could you try the Clean up feature?
Another option is open the folder location of the project, then delete /bin and /Libs
Try using relative path for traversing the filesystem.
Instead of using 'Test Cases/Mycase', use
import com.kms.katalon.core.configuration.RunConfiguration
String myRelativePath = RunConfiguration.getProjectDir() + '/Test Cases/Mycase'
For example, instead of calling a Test Case with
WebUI.callTestCase(findTestCase('Test Cases/Mycase'), [:])
you would call it with
WebUI.callTestCase(findTestCase(myRelativePath), [:])
Related
I am pretty new to the .net and I had this error while trying to publish my website to file system.
Error: A '-dest' argument must be specified with the 'sync' verb. This error is shown when I try to publish in the default detination
Copying to output path C:\Users\Iulica'sPc\AppData\Local\Temp\PublishTemp\GpsTracking103
Multiple commands defined. Defaulting to web.
Using command 'web' as the entry point for web.config.
Time elapsed 00:02:45.9471627
Publishing with publish method [FileSystem]
Publishing files to C:\Users\Iulica'sPc\Documents\Visual Studio 2015\Projects\GpsTracking\artifacts\bin\GpsTracking\Release\PublishOutput
Executing command ["C:\Program Files (x86)\IIS\Microsoft Web Deploy V3\msdeploy.exe" -source:contentPath='C:\Users\Iulica'sPc\AppData\Local\Temp\PublishTemp\GpsTracking103\' -dest:contentPath='C:\Users\Iulica'sPc\Documents\Visual Studio 2015\Projects\GpsTracking\artifacts\bin\GpsTracking\Release\PublishOutput' -verb:sync -enableRule:DoNotDeleteRule -retryAttempts:2 -disablerule:BackupRule]
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v14.0\Web\Microsoft.DNX.Publishing.targets(386,5): Error : Error: A '-dest' argument must be specified with the 'sync' verb.
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v14.0\Web\Microsoft.DNX.Publishing.targets(386,5): Error : Error count: 1.
I have searched for hours for an answer but nothing solved my problem.
Please help!
I think it's because there is an ' in your path name (or your username actually):
["C:\Program Files (x86)\IIS\Microsoft Web Deploy V3\msdeploy.exe" -source:contentPath='C:\Users\Iulica'sPc\AppData\Local\Temp\PublishTemp\GpsTracking103\' -dest:contentPath='C:\Users\Iulica'sPc\Documents\Visual Studio 2015\Projects\GpsTracking\artifacts\bin\GpsTracking\Release\PublishOutput' -verb:sync -enableRule:DoNotDeleteRule -retryAttempts:2 -disablerule:BackupRule]
Try deploying to a different folder like c:\projects\ ad also the source path could be the issue.
Check the Important things to remember here: https://technet.microsoft.com/en-us/library/dd569005(v=ws.10).aspx
In order for the sync operation to function correctly, the Msdeploy.exe.configsettings file must be the same on the source and destination computers. If you add any rules or custom providers to the Msdeploy.exe.configsettings file, make sure that this configuration file is identical on the source and the destination computers before you perform a synchronization.
I am using Visual studio 2012 & creating a VB.Net Windows Forms Application whereas i am trying to embed an excel sheet data into the form.
I have installed, Office web components 11. while dragging and dropping the Microsoft office spread sheet Item it says following error
Failed to import ActiveX control. Please ensure it is properly registered.
PFB snapshot.
*Build console:)*
------ Build started: Project: WindowsApplication7, Configuration: Debug Any CPU ------
COM Reference 'OWC11' is the interop assembly for ActiveX control 'AxOWC11' but was marked to be linked by the compiler with the /link flag. This COM reference will be treated as a reference and will not be linked.
C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets(2015,5): warning MSB3284: Cannot get the file path for type library "7c0ffab0-cd84-11d0-949a-00a0c91110ed" version 1.0. Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED))
C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets(2015,5): error MSB3303: Could not resolve COM reference "0002e558-0000-0000-c000-000000000046" version 1.0. Object reference not set to an instance of an object.
C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets(2015,5): warning MSB3284: Cannot get the file path for type library "7c0ffab0-cd84-11d0-949a-00a0c91110ed" version 1.0. Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED))
C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets(2015,5): error MSB3303: Could not resolve COM reference "0002e558-0000-0000-c000-000000000046" version 1.0. Object reference not set to an instance of an object.
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
Note: I am able to embed the excel sheet using VBA form in my system.
I am using Microsoft 2010.
It looks like you may be able to do your drag/drop, click ok, then rebuild and try to drag/drop again.
If that doesn't work then you may check out this guide from MS Here
I've been using MbUnit for unit testing for a while, along with Nhibernate and Sqlite.
I am now trying to setup a CI server with Jenkins - I have successfully managed to configure Jenkins to pull the code from github and compile it using MSBuild everytime anyone pushes to github. Finally I want to run tests on the code on each successful build.
The tests all run successfully when run from within Visual Studio without any problem whatsoever, I can run each test individually or the whole project and they all run OK. However when I call Gallio.Echo.exe from command line all the tests that have to do with Sqlite fails.
This is what I've been doing to run the test from command line:
"C:\Program Files\Gallio\bin\Gallio.Echo.exe" /report-type:Html /verbosity:quiet "D:\MyProject\MyProject.Tests\bin\Debug\*.Tests.dll"
(ps: There seems to be absolutely no documentation about gallio tools - have I been looking in all the wrong palces? I want to find more about the command line arguments that I can pass)
The tests fail with this:
Gallio Echo - Version 3.3 build 454
Get the latest version at http://www.gallio.org/
Initializing the runtime and loading plugins.
Verifying test files.
Initializing the test runner.
Running the tests.
[failed] Fixture MyProject.Tests/VerificationTests
Set Up
FluentNHibernate.Cfg.FluentConfigurationException: An invalid or incomplete configuration was used while creating a SessionFactory. Check PotentialReasons collection, and InnerException for more detail.
---> NHibernate.HibernateException: Could not create the driver from NHibernate.Driver.SQLite20Driver, NHibernate, Version=3.3.1.4000, Culture=neutral, PublicKeyToken=aa95f207798dfdb4.
---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
---> System.ArgumentException: Unable to find the requested .Net Framework Data Provider. It may not be installed.
HResult: -2147024809
at System.Data.Common.DbProviderFactories.GetFactory(String providerInvariantName)
at NHibernate.Driver.ReflectionBasedDriver..ctor(String providerInvariantName, String driverAssemblyName, String connectionTypeName, String commandTypeName)
at NHibernate.Driver.SQLite20Driver..ctor()
--- End of inner exception stack trace ---
I've tried a few solutions mentioned around on SO but haven't been able to solve it. The only close thing was this answer but I am not sure what the user means by adding to config files.
Anyone has any idea why the tests fail from command line but are okay when run from within VS please?
Thanks.
I am using java1.6,grails 2.0. I want to process Docx documents.For this i have added jars poi-ooxml-3.5-FINAL.jar,ooxml-schemas-1.1.jar.
But in code line this.document = new XWPFDocument(buffInputStream);
i got below error
Class java.lang.ClassNotFoundException
Message org.apache.xmlbeans.XmlOptions
I am trying to add jars either xmlbeans-2.5.0.jar or xbean-2.1.0.jar.
I am getting below error
| Error Fatal error during compilation
org.apache.tools.ant.BuildException: java .lang.LinkageError: loader
constraint violation: loader (instance of bootloader)
previously initiated loading for a different type with name "org/w3c/dom/Type Info" (Use --stacktrace to see the full trace)
If i verify my Jre System Library, rt.jar contains this TypeInfo class. how
to solve this problem? Please advice. Thank you.
Hi,
I have tried removing library and used jarscan to search this class. But i didn't find any where. Please help out to figure out how else i can find where is this class and how to resolve this
This happened to me with the JMX MBeanServer class. Groovy was loading one of them with its classloader and so was the JVM.
In your case it sounds like the TypeInfo class exists in rt.jar just fine, but another class loader loads it from that jar (or another jar) again.
Running the JRE with "-verbose:class" showed that double load behavior. Then I moved the offending jar out of my classpath and it worked just fine with the one loaded by Groovy.
I would recommend moving rt.jar out of your classpath, or if you need other classes inside of rt.jar try unjaring and rejaring it without the Type class. That way the classloaders will be forced to use the ones in xmlbeans-2.5.0.jar or xbean-2.1.0.jar.
I have install Groovy 2.1.1 in my unix box. While executing groovysh getting the below error.
Exception in thread "main" java.lang.NoClassDefFoundError: error:
Caused by: java.lang.ClassNotFoundException: error:
at java.net.URLClassLoader.findClass(URLClassLoader.java:423)
at java.lang.ClassLoader.loadClass(ClassLoader.java:660)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:346)
at java.lang.ClassLoader.loadClass(ClassLoader.java:626)
Could not find the main class: error:. Program will exit.
What could be the possible root cause for this error...???
Somewhere, you try to use the class error: (and yes, Groovy thinks that the colon is part of the class name), either in the script you execute (i.e. there must be new error: somewhere) or you wrote something like groovysh error: or you import error: (maybe indirectly)
Since you are using IBM J9, according to the Grails FAQ, the J9 need an argument to work well with Groovy, otherwise you may get a NoClassDefFound error:
Add -Xverify:none to JVM arguments
Download Groovy Binary From http://groovy.codehaus.org/Download
Download zip: Binary Release
Extract Local Disk say D;\GROOVY\ groovy-2.3.9
It contains the Folder Structure
D:.
├───bin
├───conf
├───embeddable
├───indy
├───lib
└───META-INF
Go to Control Panel\User Accounts\User Accounts Change My Environment Variables
Set/new GROOVY_HOME = D:\GROOVY\groovy-2.3.9 (don’t put : semicolon)
Set PATH = C:\Program Files\Java\jdk1.8.0_25\bin;%GROOVY_HOME%\bin;
Add groovy-all.jar to CLASSPATH
D:\ GROOVY\ \groovy-2.3.9\embeddable\groovy-all-2.3.9.jar;.
Close and Open Command and Say –groovy
For console -groovyConsole