I have edited the question after the clarification of Marcus in his commment.
I have a question and I am unable to find the answer using Google.
I know that in S/MIME encryption or with GnuPG/Enigmail, the plain text is first encrypted with a symmetric algorithm such as AES or 3DES or IDEA, and the password used for the symmetric encryption is encrypted with an asymmetric algorithm (RSA).
MY question, is possible using gpg or openssl to knows the symmetric algorithm used and do a partial encryption, in other words I would to decrypt only the asymmetric algorithm to view the password used for the symmetric encryption.
I'll try to explain it using math notation :
T -> plain text
s -> the symmetric algorithm encryption
p -> the password used by symmetric encryption function
a -> the asymmetric encryption function (RSA), it merges cyphered text and other data too.
k -> my public key
When someone send me a message I receive C and, since I have my private key, I decrypt it using it
C = a(p, k) + s(T, p)
I would to know s(T, p) and p, if possible.
Related
I have an API to call where I have to encrypt my data using RSA/ECB/PKCS1 Padding & AES/CBC/PKCS5PADDING.
Sample Data: {"KEY":"VALUE"}
Step.1:
I have to generate a random number of 16 digit. eg: '1234567890123456'
Step.2:
Do RSA/ECB/PKCS1Padding to random number and base64Encode the result. we get "encrypted_key"
Step.3:
Concatenate random number & data:
DATA = 1234567890123456{"KEY":"VALUE"}
Step.4:
Do AES/CBC/PKCS5Padding on DATA (from Step 3) using random number(1234567890123456) as KEY & Base64Encoded random number as IV. we get "ENCRYPTED_DATA"
So, for Step 1 I am using JSEncrypt javascript library.
for Step 4 I am using CrytoJS.AES.encrypt() function. I am pretty sure that my JSEncrypt function is running fine as the client is able to decrypt it but client is not able to decrypt my data. I feel that I am making a mistake while using CryptoJS.
Can someone guide me properly on how to use the library.
What I am doing is:
KEY = '1234567890123456'
IV = MTIzNDU2Nzg5MDEyMzQ1Ng== (result of btoa('1234567890123456') )
DATA = "1234567890123456{"KEY":"VAL"}"
cryptedData = Crypto.AES.encrypt(DATA, KEY, {iv: IV, mode: CryptoJS.mode.CBC,padding:CryptoJS.pad.Pkcs7})
I am told to use PKCS5Padding in AES/CBC Encryption ( Step 4 ) but it seems that AES does not support PKCS5Padding but PKCS7Padding.
I think I am making a mistake in the way I am passing KEY & IV to CryptoJS.
Any help will be greatly appreciated.
For the start lets see why are you doing the exercise. RSA is intended to encode only limited amout of data. So we use "hybrid encryption", where the data are encrypted using a symmetric cipher with a random key and the key itself is encrypted using RSA
Encryption works on binary data, to safely transmit binary data, the data are encoded to printable form (hex or base64)
Step.1: I have to generate a random number of 16 digit
What we see is 16 digits 0-9. That's not really safe. Generating 16 digits you will get a key of 10^16, which is equals of approx 2^53 (if I did the math wrong, please comment).
You need to generate 16 random bytes (digits 0-256 resulting in 2^128 key). That is your DEK (data encryption key).
You may encode the DEK to be in printable form, in hexadecimal encoding it will have 32 characters.
Step.2:
ok, you now get encrypted encoded_encryption_key
Step 3, Step 4
And here you should understand what are you doing.
encrypt DATA using DEK ( not encoded random number in binary form), you will get encrypted_data. You can encode the result to encoded_encrypted_data
concatenate the encrypted key and encrypted data. It. is up to you to choose if you encode it before or after encoding. I suggest you make concatenation of encoded_encryption_key and encoded_encrypted_data with some separator, because if RSA key length changes, the length of encoded_encryption_key changes too
Make sure to discuss with the client what format is expected exactly.
Notes:
IV needs to be 16 bytes long for AES and for CryptoJS I believe it needs to be Hex encoded, so using btoa may not be the best idea. I believe the CryptoJS just trims the value to 16 bytes, but formally it is not correct.
CBC cipher needs some sort of integrity check, I suggest to add some HMAC or signature to the result (otherwise someone could change the ciphertext without you being able to detect the tamper)
but it seems that AES does not support PKCS5Padding but PKCS7Padding.
Indeed AES supports Pkcs7. Pkcs5 is functionally the same, but defined on 64 blocks. The designation is still used in Java as heritage from DES encryption.
I'm working on a homework assignment on paper where I must design an RSA cryptosystem and show the steps of encrypting/decrypting a message by hand.
I have selected and calculated my p, q, n, and phi(n). I am now encrypting the message "HELLO". I have started by breaking each letter into its ASCII equivalent such that H = 72, E = 69, and so forth.
My question is should I encrypt/decrypt each letter separately to/from ciphertext or is there a better way to do it while leaving it as one string?
It seems daunting to have to do the Extended Euclidean Algorithm by hand for all the letters in order to find the decryption key.
I ask this question because I assume that RSA handles this in a better way as to not have to run encryption on each character but encrypt it as a whole.
TL;DR Should I encrypt each letter separately or can I do it all at once?
RSA encrypts the whole message by converting the whole text into a very large integer usually by putting an integer representation of each character in the text side by side and then applying the public key. If each character is encrypted separately, the encrypted message will be vulnerable to frequency analysis.
In hill cipher we use a key matrix to encrypt a plain text.the same way we find inverse of the key matrix to decrypt the cipher text.finding the inverse of the key matrix in the decryption side makes the decryption process a bit complex.so is there any way to decrypt the cipher text with the same key matrix without finding the inverse of the key matrix in the decryption side?
You can, but then you need to solve a system of linear equations for each text block. Since this is almost as expensive as inverting the matrix, it is not a useful approach.
I see some parameters in RSA cryptography such as D / DP/ DQ P and Q what this parameters really do is it some kind of padding for the cipher text?
These parameters are used to speed up the private key operations using the Chinese remainder theorem.
The wikipedia article on RSA describes how this is done.
It appears they are both encryption algorithms that require public and private keys. Why would I pick one versus the other to provide encryption in my client server application?
Check AVA's answer below.
My old answer seems wrong
Referring, https://web.archive.org/web/20140212143556/http://courses.cs.tamu.edu:80/pooch/665_spring2008/Australian-sec-2006/less19.html
RSA
RSA encryption and decryption are commutative
hence it may be used directly as a digital signature scheme
given an RSA scheme {(e,R), (d,p,q)}
to sign a message M, compute:
S = M power d (mod R)
to verify a signature, compute:
M = S power e(mod R) = M power e.d(mod R) = M(mod R)
RSA can be used both for encryption and digital signatures,
simply by reversing the order in which the exponents are used:
the secret exponent (d) to create the signature, the public exponent (e)
for anyone to verify the signature. Everything else is identical.
DSA (Digital Signature Algorithm)
DSA is a variant on the ElGamal and Schnorr algorithms.
It creates a 320 bit signature, but with 512-1024 bit security
again rests on difficulty of computing discrete logarithms
has been quite widely accepted.
DSA Key Generation
firstly shared global public key values (p,q,g) are chosen:
choose a large prime p = 2 power L
where L= 512 to 1024 bits and is a multiple of 64
choose q, a 160 bit prime factor of p-1
choose g = h power (p-1)/q
for any h<p-1, h(p-1)/q(mod p)>1
then each user chooses a private key and computes their public key:
choose x<q
compute y = g power x(mod p)
DSA key generation is related to, but somewhat more complex than El Gamal.
Mostly because of the use of the secondary 160-bit modulus q used to help
speed up calculations and reduce the size of the resulting signature.
DSA Signature Creation and Verification
to sign a message M
generate random signature key k, k<q
compute
r = (g power k(mod p))(mod q)
s = k-1.SHA(M)+ x.r (mod q)
send signature (r,s) with message
to verify a signature, compute:
w = s-1(mod q)
u1= (SHA(M).w)(mod q)
u2= r.w(mod q)
v = (g power u1.y power u2(mod p))(mod q)
if v=r then the signature is verified
Signature creation is again similar to ElGamal with the use of a
per message temporary signature key k, but doing calc first mod p,
then mod q to reduce the size of the result. Note that the use of
the hash function SHA is explicit here. Verification also consists of
comparing two computations, again being a bit more complex than,
but related to El Gamal.
Note that nearly all the calculations are mod q, and
hence are much faster.
But, In contrast to RSA, DSA can be used only for digital signatures
DSA Security
The presence of a subliminal channel exists in many schemes (any that need a random number to be chosen), not just DSA. It emphasises the need for "system security", not just a good algorithm.
Btw, you cannot encrypt with DSA, only sign. Although they are mathematically equivalent (more or less) you cannot use DSA in practice as an encryption scheme, only as a digital signature scheme.
With reference to man ssh-keygen, the length of a DSA key is restricted to exactly 1024 bit to remain compliant with NIST's FIPS 186-2. Nonetheless, longer DSA keys are theoretically possible; FIPS 186-3 explicitly allows them. Furthermore, security is no longer guaranteed with 1024 bit long RSA or DSA keys.
In conclusion, a 2048 bit RSA key is currently the best choice.
MORE PRECAUTIONS TO TAKE
Establishing a secure SSH connection entails more than selecting safe encryption key pair technology. In view of Edward Snowden's NSA revelations, one has to be even more vigilant than what previously was deemed sufficient.
To name just one example, using a safe key exchange algorithm is equally important. Here is a nice overview of current best SSH hardening practices.
And in addition to the above nice answers.
DSA uses Discrete logarithm.
RSA uses Integer Factorization.
RSA stands for Ron Rivest, Adi Shamir and Leonard Adleman.