Is it possible to not import any theory in Isabelle? - isabelle

I want to define my own list type in a theory named List, but there is already a theory with that name.
Is there a more lightweight theory than Main?

Note that $ISABELLE_HOME/src/HOL/ex/Seq.thy gives a minimal example of defining your own list datatype for experimentation, without embarking on the delicate question how to work with the system below its Main entry point. (Beginners get confused and experts don't do it.)
Theoretically, the most primitive theory you could import is Pure, but that is just the bare-bones logical framework, without any object-logic like HOL yet. Just for curiosity, you may look at $ISABELLE_HOME/src/HOL/ex/Higher_Order_Logic.thy which starts from Pure and defines a minimal version of H.O.L. on top of it, without any of the advanced theories and tools you would expect from full Isabelle/HOL, though.

You cannot import nothing in Isabelle (as the import is necessary even for the basic logic). The implementation of HOL in Isabelle has three supported entry points: Main, Complex_Main (which is Main plus some Analysis) and Plain, but only the first two are intendend for regular usage.
Plain already contains the basic logic, but almost nothing in terms of the standard library (e.g. no lists). But also important tools like QuickCheck, Sledgehammer and the code generator are missing. Moreover, if you start from Plain to be able to name your own theory List, be aware that your theory will be incompatible with any work building on Main (which is almost everything).
So, unless you have really good reasons to do so, I would suggest following Raphael's comment and give your list theory another name.

You may import HOL only, as in
theory Test_Theory
imports HOL
begin
…
end
I often do it for testing and investigating about Isabelle.
However, you will lack data‑type definitions, and will probably need to import Datatype (and may be even Record) as well, in order to be able to write your List theory.
theory Test_Theory
imports HOL Datatype Record
begin
…
end
As both Datatype and Record imports HOL, you may simply have:
theory Test_Theory
imports Datatype Record
begin
…
end
That's not easy to do without theory Main, but not impossible. Just be aware you will have to do without many widely used theorems, and may have to write and prove your owns.

Related

completely replace the inner syntax in isar?

I am interested in using Isar as a meta language for writing formal proofs about J, an executable math notation and programming language, and I'd like to be able to use J as the inner syntax.
J consists of a large number of primitives, and assigns (multiple!) meanings to every ASCII character, including single and double quotes.
Where can I find documentation or example code for implementing a completely new inner syntax? Or is this even possible? (I've been looking around in the src/ directory, but it's somewhat overwhelming and I'm not entirely sure what I'm looking for.)
Answer B: Building on HOL, with an Improvised J Syntax
Clarification is good, but I don't like to do the handshaking necessary to do it.
My first answer below was largely based on your phrase, "a completely new syntax", and I think it's half of an answer to a question like this:
Suppose, hypothetically, that I need syntax that's very close to the the syntax of J. What would that require, with regards to Isabelle/HOL?
My answer:
Most likely, I'd say you would have to undefine much of the syntax for the constants, functions, and type classes of Isabelle/HOL, which would require that you do extensive editing of the standard Isabelle/HOL distribution, to get it back working. And some syntax in Isabelle/HOL, you most likely wouldn't be able to take out.
Or, you would have to start fresh, with an import of Pure as a starting point. Please see my first answer below.
Just Syntax? Now we're back in normal user space
The customization of syntax in Isabelle/HOL makes us all a potential True Artiste.
There are advanced ways to tap into the power of defining syntax, such as parse_translation, with Isabelle/ML, but I don't use advanced methods. I use a few basic keywords to define the syntax: notation, no_notation, syntax, and translations, along with abbreviation, when either I want to rearrange the input arguments of a functions, or I don't want to mess up the notation for a standard HOL function.
notation, no_notation, the easy ones
I don't use no_notation a lot, but you need it in your arsenal. For an example, see Can I overload the notation for operators that are assigned to bool and list?.
The use of notation is easy, once you see a few examples.
For an infix operator, plus :: 'a => 'a => 'a, here are some examples:
notation plus (infixl "[+]" 65)
notation (input) plus (infixl "[+]" 65)
notation (output) plus (infixl "[+]" 65)
With that example, I entered into the realm of possibly messing up the notation for plus, which is an operator for a standard, HOL type class.
The line from above that won't mess up the output display is the line that uses (input).
For notation, to find examples, do greps in THY files or on the src/HOL folder, because there are too many variations to give you lots of examples here.
abbreviation, and not messing other things up
Suppose I want a really tight binding for the standard even predicate. I could do something like this:
notation (input) even ("even _" [1000] 1000)
notation (output) even ("even _" [1000] 999)
I say "could", because I don't know how that will mess up the standard function application of even, so I wouldn't want to do that.
Why the 999? It's just from trial and error, and from experience, where I know that this next line alone messes up declare[[show_brackets]]:
notation even ("even _" [1000] 1000)
That's the way it is with defining syntax. It's a combination of trial and error, finding examples for use as templates, experience, and noticing later on that you messed something up.
I forget all the things that abbreviation helps me out with. An innovative use of abbreviation can keep you from having to use more complicated methods.
You could use it to rearrange arguments, for some notational purpose:
abbreviation list_foo :: "'a list => 'a => 'a list" where
"list_foo xs x == x # xs"
notation
list_foo ("_ +#+ _" [65, 65] 64)
That example is an example of several examples. I was just trying to make a quick example, and I had something like (infixl "_ +#+ _" [65, 65] 64). There's not a lot of variation in how I define notation, so I had to find an example in Set.thy to show me that I needed to take out the infixl, since I wanted to use [65, 65] 64 as a variation on how you can define syntax.
Did I get the priorities right with [65, 65] 64? I have no idea. It's just for a quick example.
syntax and translations
You have to have it in your arsenal, but it will cause you a lot of time-consuming grief. Do greps and find examples. Try this and that. When you stumble on something that works, and you think you need it, then save it somewhere. If you don't, and you make a small change that breaks what you had, and you didn't save what you had that worked, you will regret having to spend a lot of time trying to get back to what worked.
The Isar Reference Manual, isar-ref.pdf#175 has a little info. Also, you can look up the use of notation in that PDF.
The unasked for part of Answer Part B
In your comment, you say this:
I already do have a "logic of programming" that I want to implement (cs.utoronto.ca/~hehner/FMSD) and J is a language that's especially well suited for formal proofs. I'm just trying to figure out how to re-use Isabelle's logic infrastructure rather than writing my own.
A short, unsafe answer, from anybody, for a question like this, even hedged, is like:
You most likely can't do, in Isabelle/HOL, what you're wanting to do with J.
A safer, short answer is like this:
Most likely, you will have major problems trying to do what you're wanting to do with J in Isabelle/HOL.
Those are short, quick answers. How can an answer to a question like this be short, if it actually tries to address the why?
It ends up being a "given everything I know" answer, because many times it's not that it can't be done, but that the right group of people, given a long enough period of time, given the right technology, haven't yet done it.
My headings below become my points. I try to blow through the rest fairly quickly, but still document things.
By you using HOL as your logic, my original answer still applies if slightly modified
The development of Isabelle/HOL into what it is today, starting with Robin Milner, is what I categorize as rocket science logic.
From all of my searches, and from all of my listening, it appears that there's still a lot of rocket science logic that needs to be developed before proof assistants can be used to formally verify any ole program written in any ole imperative programming language.
You have a logic, HOL, but you're implying that you're going to implement something similar to what a whole of lot people want, and have wanted for a long time.
What's below is to support what I say here.
J as a language well suited for formal proofs
There would be the traditional form of algorithm analysis, like Introduction to Algorithms, 3rd, by Cormen & Leiserson.
I'll call program proofs in Isabelle/HOL mechanized proofs and formally verified programs. I also consider certain pencil-and-paper proofs to be formal.
In traditional, non-mechanized proofs, then, yes, I guess J is a language well suited for formal proofs, which I say because you've told me it is. But then, big, popular programming languages, in particular C++ and Java, have textbooks written about them on the subject of formal, algorithm analysis. So, it must be, with traditional, non-mechanized proofs, they can also be reasoned about.
J in the context of mechanized proofs
No, it's not a language well-suited for formal, mechanized proofs. It uses (a better word than uses?) imperative programming, and it appears to be object oriented.
Largely, I'm just repeating things I've read others say. I'll start making statements as my personal conclusions. That will make things shorter.
Functional programming languages are good for formal proofs. Traditional programming involves mutating variables, and supposedly that bumps way up the difficulty of proofs.
I was searching for a statement about object oriented languages on the mailing list, but if you listen, people say they've done this or that special thing, but it's never something like, "Here's a complete development and formalization that easily allows you to verify programs written in general-purpose programming language X".
Formal proof, among other things, is about a set of axioms being enforced, where the selection of the axioms is the result of rocket science logic over a number of years, because the norm is not for a seemingly desirable set of axioms to be logically consistent.
For formal verification, you don't get to bypass the enforcement of the axioms. In textbooks, number constants just show up and get used, and they reason about them.
In formal proof, number constants, in particular the real numbers, are difficult to use. Ask yourself, "What is a natural number, an integer, a rational number, and a real number constant in Isabelle/HOL?" Now, if you answered that question, then ask yourself, "How do I do proofs involving natural numbers, integers, rational numbers, and real numbers in Isabelle/HOL?"
Now, contrast those questions with the fact that number constants just show up in most textbooks, and get used. That's not the way it works in formal proof. There's no magical appearance of number systems and constants. There can be a little magic in the automation of proofs involving numbers, but I'm pretty sure I'm doomed if my plan ever becomes dependent on magic like that.
L4.verified (and AutoCorres)
There's the L4.verified project by NICTA. (Update: And at sel4.systems, with co-credit given to General Dynamics C4 Systems. A big-name company like GD being involved supports my thesis that formal verification of imperative programming languages is something that's been highly desired for a long time.)
A quote:
We chose an operating system kernel to demonstrate this: seL4. It is a small, 3rd generation high-performance microkernel with about 8,700 lines of C code.
Why so selective? Why not any ole C program? I guess verifying C is hard. NICTA, they're not a small, inexperienced, unfunded group.
(Update: There's also the related AutoCorres project at NICTA, with its Quickstart Guide PDF. The release version is at v1.0, which was released on 2014-12-16. That must mean that they achieved the primary goal of whatever it was they were supposed to achieve. When I read their overview on the AutoCorres web page, I take it as supporting what I'm saying. It appears to me that they engage in some rocket science logic to get the C into another form, at least a little rocket science logic. I'm no authority on what constitutes rocket science logic. I think I'm safe in saying for sure that they're using PhD level logic to get their results.)
The book Practical Theory of Programming: where did number constants come from?
I downloaded the PDF for the book A Practical Theory of Programming.
One of the first things I started looking for in that book is "what are numbers and how are they formalized".
Number systems, we take them for granted, but they represent all that which is difficult about formal proof.
In a book, when number constants just show up, and just start getting used, it most likely means that there's no real formalization of the corresponding number systems. Why? Building up number system constants is extraordinarily involved.
If number constants weren't formally built up, there's no real formal proof there. If they do get built up formally, life is still not easy.
Here's something about the difficulty of working with real numbes: Larry Paulson's talk at NASA in 2014.
The book Practical Theory of Programming: while loops
The other thing I immediately started looking for was an example of a traditional loop, where you repeatedly modify a variable.
It starts at Section 5.2.0 While Loop, aPToP.pdf#76. The example is on the following page, Exercise 265:
while ¬ x = y = 0 do
if y > 0 then y := y - 1
else (x := x - 1. var· y := n)
There you go, a classic example of using mutable state (where I did searches on "mutable state" to actually see if I used the phrase correctly, with no clear conclusion).
You have a variable, and you're changing it's contents. That, so I hear, or so I conclude, represents why you're doomed when it comes to wanting to verify programs you write in J.
It's not that I want you to be doomed. When you put up on GitHub "The Formalization of the J Programming Language in Isabelle/HOL - with Many Demonstrations Showing the Ease with which J Programs Can Be Formally Verified", I'll be there.
Coq. What's out there for imperative programming?
I have this hunch that Coq would be better, if my main application was programming.
I keep the requirements minimal, by doing a Google search on coq imperative.
The first link is Ynot.
Does this support your idea that you should be able to take J and implement it in Isabelle/HOL?
Not to me. It supports my idea that if someone, who knows a lot, and gets to make a design decision about the language they're going to use, then they can do formal verification of imperative programs in a proof assistant.
You, on the other hand, first pick the programming language, and then are now going to mold a proof assistant around it.
My interest about J, on a scale from 0 to 10
At this point, my interest in J is basically 0, on a scale from 0 to 10.
Suppose, though, you put up a web site, "How It's Going with That J Thing", and I subscribe to it with a RSS reader.
It's not that I don't want you to formally verify J programs in Isabelle/HOL, it's that I don't think you'll be able to do it, and so there's no reason for me to care about it, since I don't need it.
However, if I saw new activity in my RSS reader for your site, and it told me you succeeded, and you put your code up on GitHub, then my interest goes to 10. Someone doing formalization for a full-blown programming language in Isabelle/HOL, where proofs can be decently implemented, like for functional programming, and not just for a small subset of the language, that's something to be interested in.
Original Answer
Four days have passed, it's the holiday period, and the experts might not show up, so I give you my answer.
I try to get to the short answer as quick as possible, but I say a few things first (actually, a lot of things), to try and give my quick answer some support.
I don't think you're using the Isabelle vocabulary quite right ("inner syntax"), but I take two phrases of yours, with my bold emphasis added:
I am interested in using Isar as a meta language for writing formal proofs about J...
Where can I find documentation or example code for implementing a completely new inner syntax?
I'm not one to want to spend time clarifying, so here's what I take as your requirements, where I add a few details, from having listened to the experts, and figuring out a few things for myself, based on what they've said:
You want a logic which can be used to reason about programs you've written in J, where you use the minimal logic of Isabelle/Pure as your starting point (because you need the complete syntax of J, and want to start fresh).
You want to define syntax, using Isabelle/Isar, which implements (or models?) the complete syntax and functionality of J. (You didn't say that you only wanted to reason about a subset of the syntax and functionality of J.)
Unfortunately, my short answer is not completely set up.
To try to get you to realize what you're asking for, I now quote from the main J web page, where the emphasis is mine:
J is a modern, high-level, general-purpose, high-performance programming language.
I rephrase now general-purpose as full-blown, like C, like Pascal, like many high-level, general-purpose programming languages, and I remind you that you want two things:
A logic in Isabelle, which surely has to be comparable in sophistication, in features, and in power to the logic of Isabelle/HOL.
The syntax and use (or modeling?) of a full-blown programming language, J, in Isabelle, starting with Isabelle/Pure, where your implementation surely has to be
a little comparable in sophistication and power to the code generator of Isabelle/HOL, which can export code for 5 programming languages, SML, OCaml, Haskell, Scala, and Eval (Isabelle/ML),
and comparable in power to the logic engine of Isabelle/HOL, which implements (or models?) high-level, functional programming constructs such as definition, primrec, datatype, and fun, which let a person define functions and new datatypes, along with the standard library of Isabelle/HOL types, such as pairs, lists, etc.
Now, what I claim, as my personal conclusion, is that what you want to implement is at least as difficult to implement as Isabelle/HOL, which is the result of a large number of people, done over many years.
Please consider what Peter Lammich had to say on the Isabelle user's list in I need a fixed mutable array:
HOL itself does not support mutable arrays.
However, there is Imperative_HOL, which has a heap monad supporting
mutable arrays.
Then there is afp/Collections/Lib/Diff_Array, which provides an
implementation of arrays that behaves purely functional, but is
efficient if only the last version is accessed.
However, if you are not after efficient executability, but only
looking for an abstract model of a memory, it makes no sense using the
above types, as the efficiency comes at the price of additional
formalization overhead.
My point from the quote is that Isabelle/HOL, though powerful enough to be one of the leading competitors as a proof assistant, doesn't implement standard arrays in the main part of its logic, which you get when you import Complex_Main.
Let (L, P) be a pair, where L is the logic and P is the programming language. I want to talk about two pairs, (Isabelle/HOL, Haskell), and what you want, (x, J), where x is your yet determined logic.
There is a very close relationship between Isabelle/HOL and Haskell. For example, the type classes of Isabelle/HOL are advertised as Haskell-like type classes, and also, that Haskell is a pure functional programming language, and Isabelle/HOL is pure. I don't want to go further, because as a non-expert, I'm sure to say something that's not right.
The point I want to make is this:
Haskell is a full-blown programming language,
Isabelle/HOL is a powerful logic,
Haskell is one of the programming languages that can be exported from Isabelle/HOL,
but yet Isabelle/HOL doesn't implement (or model?) much of Haskell.
I don't want to talk as some authority. But from listening, my conclusion is: it's that logic thing. Apparently, it's much easier to implement programming languages than to develop logic to reason about programs.
The short answer is that, in my opinion, the example code that you're looking for is Isabelle/HOL, because though there are some examples in Isabelle2014/src of other logics, what I've quoted you as saying and wanting, and what I'm saying you're saying and wanting, is that you want and need a full blown logic, like Isabelle/HOL.
From here, I try to throw out a few quick ideas.
I like that car, but what I really want is liquid nitrogen for fuel
That's my joke.
You're talking to a senior engineer, who has worked in the industry for years, and has learned the expert knowledge that has accumulated in the automotive industry, over years and years, and you say, "I like that idea of a car, but my idea is to use a nitrogen fuel cell instead of gasoline. How would I do that?"
More logics in the Isabelle2014/src folder
The links under Theory libraries for Isabelle2014, on the distribution web page, match up with folders in the Isabelle2014/src folder.
In the src folder, you will see the folders CCL, Cube, CTT, and others.
I'm sure those are good for learning, though probably still difficult to understand, but those aren't what you've described. You're asking for a full blown implementation of something that models a programming language.
If the use of C/C++ is so big, then why isn't there something like you want for C/C++?
I guess there is, at least, sort of, for C. I found vcc.codeplex.com/. Again, I'm not an expert, so I don't want to be saying exactly what is out there, and what isn't.
My point here is that C and C++ have been around for a long time, and heavily used, and the link above shows that there are professionals which have, for a long time, been interested in verifying C programs, which makes a lot of sense.
But, after all these years, why isn't program verification an integral part of C/C++ programming?
From having listened to those here and there, and on the mailing list, and from listening to people like Martin Odersky, the Scala architect, they forever want to talk about mutable and immutable state, where traditional programming, like C, and I assume J, would be in the category of using mutable state, very much using it. Over time, I have heard a number of times that mutable state makes it difficult to reason about what a program does.
My point again is that it must be a lot easier to design programming languages, than to reason about programs.
Finally, a little source
If there had been some competition for this question, I might have been less verbose, though maybe not, though probably so, as in not even giving an answer.
My final point is a re-emphasis of points above. It pays to know a little history, and I start way before Church and Curry.
I know that Isabelle/HOL is the result of what started at Cambridge, with Robin Milner, the author of ML, then Mike Gordon of the HOL group, then Larry Paulson, the author of using Pure as minimal logic to define other logics, and then Tobias Nipkow teamed up with him to get HOL started as a logic in Isabelle, and then Makarius Wenzel put a higher-level syntax on it all, Isar (it's more than just syntactic sugar; it's fundamental to the feature of structured proofs), along with the PIDE frontend, and all along other people throughout the world have made numerous contributions, many from the big group at TUM, in Germany, but then there's CERN of Australia (update: CERN? that was no joke; I actually do know the difference between CERN and NICTA; the world, it's not an easy thing to talk about), and back to the European area, a certain Swiss establishment, ETH, and still more places spread around Germany and Austria, UIBK, and back over to England? Who did I leave out? Me, of course, and lots of others around the world.
The rambling point? It's that thing of you asking for something that embodies the expertise of an industry. It's not bad to ask for it. It's downright audacious, and I could be completely wrong in what I'm saying, and missed that folder in src, the HOWTO of Implementing Logic for General-Purpose Programming Languages, All in Ten Mostly Easy Steps, Send in Your $9.95 Now, or Euros if That's All You Got, You Do the Conversion, I Trust You, But Wait, There's More, Do a Change Directory to Isabelle2014/medicaldoctor and Learn How to Become a Brain Surgeon, Too.
That's another joke, I claim. Just a space filler, nothing much more.
Anyway, consider here lines 47 to 60 of HOL.thy:
setup {* Axclass.class_axiomatization (#{binding type}, []) *}
default_sort type
setup {* Object_Logic.add_base_sort #{sort type} *}
axiomatization where fun_arity: "OFCLASS('a ⇒ 'b, type_class)"
instance "fun" :: (type, type) type by (rule fun_arity)
axiomatization where itself_arity: "OFCLASS('a itself, type_class)"
instance itself :: (type) type by (rule itself_arity)
typedecl bool
judgment
Trueprop :: "bool => prop" ("(_)" 5)
Periodically, I've put in effort at understanding those few lines. For a long time, my starting point was typedecl bool, and I wasn't concerned with trying to understand what what was before that, other than that HOL.thy imports Pure.
Recently, in trying to figure out types and sorts in Isabelle, from having listened to the experts, I finally saw that this line is where we get something like x::'a::type:
setup {* Object_Logic.add_base_sort #{sort type} *}
Another point? I'm back to what I said earlier. Because you want full-blown, your example is Isabelle/HOL, but yet just the first 57 lines of HOL.thy aren't easy to understand. But if you don't start with HOL, where are you going to look? Well, if what you find ends up being easy, there's a good chance it's partly because hundreds of people, over many years, didn't put their effort into the best way to start things out.
Or, it could have just been the 3 people listed as authors, Nipkow, Wenzel, and Paulson. In any case, there's still years of experience and education behind what's in there, even though HOL.thy is not that long, only 2019 lines. Of course, to understand what's in HOL.thy, you have to at least have a vague understanding of what Pure is.
Take a look at the src/Cube folder. It's one of the example logics that I mentioned above.
There are only two files, Cube.thy and Example.thy. It should be easy enough, but then that's the problem, it's too easy. It's not going to reflect the sophistication of Isabelle/HOL.
Your problems aren't my problem. Isabelle/HOL is good for reasoning about mathematics, like its ability to abstract operators with type classes. And it's good for more, like defining functions using functional programming, to be exported for OCaml, Haskell, SML, Haskell, and Eval.
I'm just a beginner, that's all I am. If there's a better answer, then I hope it gets put forth by someone.
A few notes on the original question:
Outer syntax is the theory and proof language of Isar; to change it you define additional commands. You are subject to general types of theory content, like theory, local_theory, Proof.context, but these types are very flexible and can assimilate arbitrary ML data that is specific to your application.
Inner syntax is the type/term language of the logic, i.e. Pure for the framework and HOL for applications (or any other logic that you prefer, although HOL is so advanced today, that you should not ignore it without really good reasons). Ultimately you spell-out simple-typed lambda terms.
Both for outer and inner syntax you are subject to certain notions of tokens (identifiers, quoted strings etc.). Your language needs to conform to that, if it is meant to co-exist directly with the existing syntax framework.
It is nonetheless possible to embed totally different languages into outer and inner syntax of Isabelle, by using quotations. E.g. see the document preparation language that is based on LaTeX and is delimited by funny {* ... *} markers for verbatim text. More basic quotations use " ... " simular to ML string syntax. Inside the inner syntax, '' ... '' (double single quotes) do a similar job.
In Isabelle2014 there is a new syntactic device of text cartouches that makes this work a bit more smoothly. E.g. see the examples in Isabelle2014/src/HOL/ex/Cartouche_Examples.thy which explore a bit some possibilities.
Another current example from Isabelle2014 is the rail language inside Isabelle document source: it may serve as almost stand-alone example of a "domain-specific formal language" defined from scratch. E.g. see Isabelle2014/src/Doc/Isar_Ref/Document_Preparation.thy and look at the various uses of #{rail ...} -- the implementation of that is in Isabelle2014/src/Pure/Tools/rail.ML -- a file of finite size to be studied carefully to learn more.

Can I execute untrusted Common Lisp code in a restricted environment?

Supposed I wanted to take advantage of Common Lisp's ability to read and execute Common Lisp code so that my program can execute external code written in Lisp, but I don't trust that code so I don't want it to have access the full power of Common Lisp. Is it possible for me to restricts its environment so that it can only see the packages/symbols to which I explicitly give it access, effectively creating a DSL?
To read the code, start by disabling *read-eval* (that stops people injecting execution during parsing, using something like #.(do-evil-stuff). You probably want to do the reading using a custom read-table that disables most (if not all) read-macros. You probably want to do the reading with a custom, one-off, package, importing only symbols you allow.
Once you've read the user-provided code, you still need to validate that there's no unexpected function/macro references in the code. If you have used a custom package, you should be able to confirm that each symbol falls in either of the two classes "belongs to the custom one-off package" (this is user-supplied stuff) or "explicitly allowed from elsewhere" (you would need this list to construct the custom package).
Once that's been done, you can then evaluate it.
However, doing this correctly would take a fair bit of care and you really should have someone else have a look at the code and actively try to break out of the sandbox.
Take a look at the section 'Reader security' in chapter 4 of Let over lambda which discusses this topic in some depth. In particular, you probably want to set *read-eval* to nil. To address your question regarding restricting access to the environment, this is generally difficult in Common Lisp, as it is designed to allow access to most pieces of the system in the first place. Maybe you can use elaborate the ideas of Let over lambda in the direction of white listing symbols (in comparison to the blacklisting of macro characters in the linked chapter). I don't think there are any ready-made solutions.

ECS with Go - circular imports

I'm exploring both Go and Entity-Component-Systems. I understand how ECS works, and I'm trying to replicate what seems to be the go-to document of ECS, namely http://cowboyprogramming.com/2007/01/05/evolve-your-heirachy/
For performance, the document recommends to use static arrays of every component type. That is, not arrays of component interfaces (arrays of pointers). The problem with this in Go is circular imports.
I have one package, ecs, which contains the definitions for Entity, Component and System types/interfaces as well as an EntityManager. Another package, ecs/components, contains the various components. Obviously, the ecs/components package depends on ecs. But, to declare arrays of specific components in EntityManager, ecs would depend on ecs/components, therefore creating a circular import.
Is there any way of avoiding this? I am aware that normally a high level system should not depend on lower systems. I'm also want to point out that using an array of pointers is probably fast enough for my purposes, but I'm interested in possible workarounds (for future reference)
Thank you for your help!
For performance, the document recommends to use static arrays of every
component type.
I'm just going to start off saying that I may be blind, but I ctrl+f'd and read that document multiple times and didn't see anything close to that. (Certainly some optimizations could be made this way with regards to things like avoiding cache misses, but I'm dubious it in any way outweighs the clerical overhead).
There's the easy answer to the exact question you asked first, the . import. Any package with an import statement like import . "some/other/package" will treat that package's contents as its own, ignoring circular dependencies. Don't do this.
Unfortunately, without merging the packages, you won't be able to do this (without using interfaces, I mean). Don't fear, though. The article you posted explicitly says this under "implementation details".
Giving each component a common interface means deriving from a base
class with virtual functions. This introduces some additional
overhead. Do not let this turn you against the idea, as the additional
overhead is small, compared to the savings due to simplification of
objects.
It's outright telling you to use interfaces (okay, C++ virtual inheritance, but close enough). It's okay, it's necessary. Especially if you want two slightly different AI components or something, it's a godsend then.

Program extraction using native integers/words (not bignums) from Isabelle theory

This question comes in a context where Isabelle is used with formal software development in mind more than with pure maths theorization in mind (and from a standalone developer's context).
Seems at best, SML programs generated from an Isabelle theory, use SML's IntInf.int, not the native integer type, which is Int.int; even if Code_Target_Int, Code_Binary_Nat or Code_Target_Nat is used. Investigation of these theories sources seems to confirm it's all it can do. Native platform integers may be required for multiple reasons, including efficiency and the case the SML imperative program is to be optionally translated into an imperative language subset (ex. C or Ada), which is relevant when the theory relies on the Imperative_HOL theory. The codegen.pdf document which comes with the Isabelle distribution, did not help with it, except in suggesting the first of the options below.
Options may be:
Not using Isabelle's int and nat and re‑create a new numeric type from scratch, then use the code_printing commands (with its type_constructor and constant) to give it the native platform representation and operations (implies inclusion of range limitations in some way in the theory) : must be tedious, although unlikely error‑prone I hope, due to the formal environment. Note this does seems feasible with Isabelle's own int and nat… it makes code generation fails, and nothing tells which constants are missing in the code_printing command.
If the SML program is to be compiled directly (ex. with MLTon), tweak the SML environment with a replacement IntInf structure : may be unsafe or not feasible, and still requires to embed the range limitations in the theory, so the previous options may finally be better than this one.
Touch the generated program to change IntInf into Int : easy, but it is safe? (at least, IntInf implements the same signature as Int do, so may be it's safe). As above, requires to specifies bounds in the theory in some way, it's OK with this.
Dive into Isabelle internals : surely unreasonable, even worse than the second option.
There exist a Word theory, but according to some readings, it's seems not suited for that purpose.
Are they other known options not listed here? Are they comments on the listed options?
If there is no ready‑to‑cook solutions (I feel there is no at the time), what hints or tracks would be best known? (ex. links to documents, mentions of concepts).
Update
Points #2 and #3 of the list, may be OK (if it really is) only if there is a single integer type. If the program use more than only one, it's not applicable.
Directly generating native words from Isabelle int would be unsound, because your formalisation would not take overflow into account where it exists in reality.
It looks like the AFP entry Native_Word does what you want, though:
http://afp.sourceforge.net/entries/Native_Word.shtml

What are the things that optimize speed declaration do in CL?

What are some of the optimization steps that this command does
`(optimize speed (safety 0))`
Can I handcode some of these techniques in my Lisp/Scheme program?
What these things do in CL depends on the implementation. What usually happens is: there's a bunch of optimizations and other code transformations that can be applied on your code with various tradeoffs, and these declarations are used as a higher level specification that is translated to these individual transformations. Most implementations will also let you control the individual settings, but that won't be portable.
In Scheme there is no such standard facility, even though some Schemes use a similar approach. The thing is that Scheme in general (ie, in the standard) avoids such "real world" issues. It is possible to use some optimization techniques here and there, but that depends on the implementation. For example, in PLT the first thing you should do is make sure your code is defined in a module -- this ensures that the compiler gets to do a bunch of optimizations like inlining and unfolding loops.
I don't know, but I think the SBCL internals wiki might have some starting points if you want to explore.
Higher speed settings will cause the compiler to work harder on constant folding, compile-time type-inference (hence eliminating runtime dynamic dispatches for generic operations) and other code analyses/transformations; lower safety will skip runtime type checks, array bound checks, etc. For more details, see
Advanced Compiler Use and Efficiency Hints chapter of the CMUCL User's Manual, which applies to both CMUCL and SBCL(more or less).

Resources