The string is "Some Words(1440)" and I want to store the numbers inside the parenthesis as a variable in twig so it can be output and used. I thought maybe I could do it with a split but I wasn't able to escape the parenthesis properly.
What I have:
Some Words (1440)
What I want to extract from the string is just the numbers in parenthesis
1440
Related
I'd like to replace the content of a column in a data frame with only a specific word in that column.
The column always looks like this:
Place(fullName='Würzburg, Germany', name='Würzburg', type='city', country='Germany', countryCode='DE')
Place(fullName='Iphofen, Deutschland', name='Iphofen', type='city', country='Germany', countryCode='DE')
I'd like to extract the city name (in this case Würzburg or Iphofen) into a new column, or replace the entire row with the name of the town. There are many different towns so having a gsub-command for every city name will be tough.
Is there a way to maybe just use a gsub and tell Rstudio to replace whatever it finds inside the first two ' '?
Might it be possible to tell it, "give me the word after "name=' until the next '?
I'm very new to using R so I'm kind of out of ideas.
Thanks a lot for any help!
I know of the gsub command, but I don't think it will be the most appropriate in this case.
Yes, with a regular expression you can do exactly that:
string <- "Place(fullName='Würzburg, Germany', name='Würzburg', type='city', country='Germany', countryCode='DE')"
city <- gsub(".*name='(.*?)'.*", "\\1", string)
The regular expression says "match any characters followed by name=', then capture any characters until the next ' and then match any additional characters". Then you replace all of that with just the captured characters ("\\1").
The parentheses mean "capture this part", and the value becomes "\\1". (You can do multiple captures, with subsequent captures being \\2, \\3, etc.
Note the question mark in (.*?). This means "match as little as possible while still satisfying the rest of the regex". If you don't include the question mark, the regular expression will match "greedily" and you will capture the entire rest of the line instead of just the city since that would also satisfy the regular expression.
More about regular expression (specific to R) can be found here
I have a main string as below
"/tmp/xjtscpdownload/7eb17cc6-b3c9-4ebd-945b-c0e0656a33f0/output/9999.317528060546245771146821638997525068657/"
From the main string i need to extract a substring starting from the uuid part
"/7eb17cc6-b3c9-4ebd-945b-c0e0656a33f0/output/9999.317528060546245771146821638997525068657/"
I tried
string.match("/tmp/xjtscpdownload/7eb17cc6-b3c9-4ebd-945b-c0e0656a33f0/output/9999.317528060546245771146821638997525068657/", "/[a-fA-F0-9]{8}-[a-fA-F0-9]{4}-[a-fA-F0-9]{4}-[a-fA-F0-9]{4}-[a-fA-F0-9]{12}/(.)/(.)/$"
But noluck.
if you want to obtain
"/7eb17cc6-b3c9-4ebd-945b-c0e0656a33f0/output/9999.317528060546245771146821638997525068657/"
from
"/tmp/xjtscpdownload/7eb17cc6-b3c9-4ebd-945b-c0e0656a33f0/output/9999.317528060546245771146821638997525068657/"
or let's say 7eb17cc6-b3c9-4ebd-945b-c0e0656a33f0, output and 9999.317528060546245771146821638997525068657 as this is what your pattern attempt suggests. Otherwise leave out the parenthesis in the following solution.
You can use a pattern like this:
local text = "/tmp/xjtscpdownload/7eb17cc6-b3c9-4ebd-945b-c0e0656a33f0/output/9999.317528060546245771146821638997525068657/"
print(text:match("/([%x%-]+)/([^/]+)/([^/]+)"))
"/([^/]+)/" captures at least one non-slash-character between two slashs.
On your attempt:
You cannot give counts like {4} in a string pattern.
You have to escape - with % as it is a magic character.
(.) would only capture a single character.
Please read the Lua manual to find out what you did wrong and how to use string patterns properly.
Try also the code
s="/tmp/xjtscpdownload/7eb17cc6-b3c9-4ebd-945b-c0e0656a33f0/output/9999.317528060546245771146821638997525068657/"
print(s:match("/.-/.-(/.+)$"))
It skips the first two "fields" by using a non-greedy match.
I’ve been looking around and haven’t found a clear answer to the following:
In R, what regex-function and what regex-string should I use to lookup an specific pattern and extract a specific part of that pattern?
For example:
Input string:
"aaabbs11:00.4.3(1111S)cccsdd(3332d)"
Desired output: the part within the brackets after the 11:00.4.3, so
# 1111S
If you want the first string in parenthesis after \d\d:\d\d.\d.\d, then
.*?\d{2}:\d{2}\.\d\.\d.*?\((.*?)\)
If the number of digits can vary, replace {2} with *, and add * after the \d without any quantifiers.
This question already has an answer here:
Reference - What does this regex mean?
(1 answer)
Closed 4 years ago.
I'm trying to understand a regular expression someone has written in the gsub() function.
I've never used regular expressions before seeing this code, and i have tried to work out how it's getting the final result with some googling, but i have hit a wall so to speak.
gsub('.*(.{2}$)', '\\1',"my big fluffy cat")
This code returns the last two characters in the given string. In the above example it would return "at". This is the expected result but from my brief foray into regular expressions i don't understand why this code does what it does.
What i understand is the '.*' means look for any character 0 or more times. So it's going to look at the entire string and this is what will be replaced.
The part in brackets looks for any two characters at the end of the string. It would make more sense to me if this part in brackets was in place of the '\1'. To me it would then read look at the entire string and replace it with the last two characters of that string.
All that does though is output the actual code as the replacement e.g ".{2}$".
Finally i don't understand why '\1' is in the replace part of the function. To me this is just saying replace the entire string with a single backslash and the number one. I say a single backslash because it's my understanding the first backslash is just there to make the second backslash a none special character.
For gsub there are two ways of using the function. The most common way is probably.
gsub("-","TEST","This is a - ")
which would return
This is a TEST
What this does is simply finds the matches in the regular expression and replaces it with the replacement string.
The second way to use gsub is the method in which you described. using \\1, \\2 or \\3...
What this does is looks at the first, second or third capture group in your regular expression.
A capture group is defined by anything inside the circular brackets ex: (capture_group_1)(capture_group_2)...
Explanation
Your analysis is correct.
What i understand is the '.*' means look for any character 0 or more times. So it's going to look at the entire string and this is what will be replaced.
The part in brackets looks for any two characters at the end of the string
The last two characters are placed in a capture group and we are simply replace the whole string with this capture group. Not replacing them with anything.
if it helps, check out the result of this expression.
gsub('(.*)(.{2}$)', 'Group 1: \\1, Group 2: \\2',"my big fluffy cat")
hope the examples can help you to understand it better:
Say we have a string foobarabcabcdef
.* matches whole string.
.*abc it matches: from the beginning matches any chars till the last abc (greedy matching), thus, it matches foobarabcabc
.*(...)$ matches the whole string as well, however, the last 3 chars were groupped. Without the () , the matched string will have a default group, group0, the () will be group1, 2, 3.... think about .*(...)(...)(...)$ so we have:
group 0 : whole string
group 1 : "abc" the first "abc"
group 2 : "abc" the 2nd "abc"
group 3 : "def" the last 3 chars
So back to your example, the \\1 is a reference to group. What it does is: "replace the whole string by the matched text in group1" That is, the .{2}$ part is the replacement.
If you don't understand the backslashs, you have to reference the syntax of r, I cannot tell more. It is all about escaping.
Important part of that regular expression are brackets, that's something called "capturing group".
Regular expression .*(.{2}$) says - match anything and capture last 2 characters at the line. Replacement \\1 is referencing to that group, so it will replace whole match with captured group, which are last two characters in this case.
I am trying to figure out how I can put together a find and replace command with wildcards or figure out a way to find and replace the following example:
I would like to find terms that contain double quotes in front of them with a single quote at the end:
Example:
find "joe' and replace with 'joe'
Basically, I'm trying to find all terms with terms having "in front and at the end.'
Check the [x] Regular expression checkbox in textpad's replace dialog and enter the following values:
Find what:
"([^'"]*)'
Replace with:
'\1'
Explanation:
In a regular expression, square brackets are used to indicate character classes. A character class beginning with a caret will match anything not in the class.
Thus [^'"] will match any character except ' and ". The following * indicates that any number of these characters can follow. The ( and ) mark a group. And the group we're looking for starts with " and ends with '. Finally in the replace string we can refer to any group via \n where n is the nth group. In our case it is the first and only group and that is why we used \1.