I am having trouble understanding how to handle deserialization exceptions during the use of RequestResponseTemplate. I create this RequestResponseTemplate by configuring DefaultKafkaProducerFactory & KafkaMessageListenerContainer(StringDeserializer, CustomDeserializer)
Problem:
Handle the deserialization error during deserilization of the value (thrown by the CustomDeserializer) by logging and moving to the next record.
Solution (tried and failed):
setCommonErrorHandler(new CommonLoggingErrorHandler()) on KafkaMessageListenerContainer
I thought this class would commit the offset of the failed record as isAckAfterHandle being set to true by default. However the offset is not commited and consumer.poll() enters into an loop.
Question: How to handle deserialization exceptions similar to LogAndContinue manner in spring cloud streams?
Stacktrace:
"#timestamp":"2022-12-13 13:23:19.726","#version":"1","message":"Error occurred while not processing records",
"logger": org.springframework.kafka.listener.CommonLoggingErrorHandler,"thread":"Container-C-1","level":"ERROR",
"stacktrace": org.apache.kafka.common.errors.RecordDeserializationException : Error deserializing key/value for partition politie.sensing.sys.melding-waarneming-response.0-0 at offset 5.
If needed, please seek past the record to continue consumption.\r\n
org.apache.kafka.clients.consumer.internals.Fetcher.parseRecord(Fetcher.java:1448)\r\n
org.apache.kafka.clients.consumer.internals.Fetcher.access$3400(Fetcher.java
:135)\r\n\tat org.apache.kafka.clients.consumer.internals.Fetcher$CompletedFetch.fetchRecords(Fetcher.java:1671)\r\n\tat org.apache.kafka.clients.consumer.internals.Fetcher$CompletedFetch.access$1900(Fetcher.java:1507)\r\n
org.apache.kafka.clients.consumer.internals.Fetcher.fetchRecords(Fetcher.jav
a:733)\r\n
org.apache.kafka.clients.consumer.internals.Fetcher.fetchedRecords(Fetcher.java:684)\r\n
org.apache.kafka.clients.consumer.KafkaConsumer.pollForFetches(KafkaConsumer.java:1277)\r\n
org.apache.kafka.clients.consumer.KafkaConsumer.poll(KafkaConsumer.java:1238)\r\n\tat
org.apache.kafka.clients.consumer.KafkaConsumer.poll(KafkaConsumer.java:1211)\r\n\tat
org.springframework.kafka.listener.KafkaMessageListenerContainer$ListenerConsumer.pollConsumer(KafkaMessageListenerContainer.java:1529)\r\n
org.springframework.kafka.listener.KafkaMessageListenerContainer$ListenerConsumer.doPoll(KafkaMessageListenerContainer.java:1519)\r\n
org.springframework.kafka.listener.KafkaMessageListenerContainer$ListenerConsumer.pollAndInvoke(KafkaMessageListenerContainer.java:1343)\r\n
org.springframework.kafka.listener.KafkaMessageListenerContainer$ListenerConsumer.run(KafkaMessageListenerContainer.java:1255)\r\n
java.base/java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:515)\r\n
java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264)\r\n
java.base/java.lang.Thread.run(Thread.java:832)\r\nCaused by: java.lang.IllegalArgumentException: Can't deserialize data [[..content is redacted..]]\r\n
my.library.common.kafka.serializer.JsonDeserializer.deserialize(JsonDeserializer.java:77)\r\n
org.apache.kafka.common.serialization.Deserializer.deserialize(Deserializer.java:60)\r\n\tat org.apache.kafka.clients.consumer.internals.Fetcher.parseRecord(Fetcher.java:1439)\r\n
... 15 common frames omitted\r\n","application":"my-micro-sens-service"
This is a simple send port, in which I'm trying to setup a filter over a promoted property. Whenever I attempt to enlist this port, I get the following error:
===================================
Could not update Send Port 'SendPort1' in Message Box. Exception from HRESULT: 0xC0C01B22 (Microsoft.BizTalk.ExplorerOM)
------------------------------
For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2013&ProdVer=3.10.229.0&EvtSrc=Microsoft.BizTalk.ExplorerOM.Resources&EvtID=IDS_ERR_SENDPORT_UPDATE
------------------------------
Program Location:
at Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer.SaveChangesWithTransaction(Object transactionObj)
at Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer.SaveChanges()
at Microsoft.BizTalk.Administration.SnapIn.Forms.Common.ExplorerPropertyPagesContainer.CommitChanges()
at Microsoft.BizTalk.SnapIn.Framework.Forms.PropertyPagesContainer.Store()
at Microsoft.BizTalk.SnapIn.Framework.Forms.SheetFramework.Store()
The filter simply checks for existence of the promoted property in the incoming message. There's only one post in MSDN forums about this exception: HRESULT 0xC0C01B22
Any idea what is causing this?
The answer is in this page: https://learn.microsoft.com/en-us/biztalk/core/promoting-properties
The note there says the following:
XSD Data Type of base64Binary, duration, ENTITES, hexBinary, IDREFS, long, NMTOKENS, and unsignedLong are not supported for promotion.
Turns out, in our case, the promoted property is of xs:long type. I changed the element type to xs:string then the issue in the question went away.
It would make sense to prevent the promotion of the elements if they are of unsupported type, in the beginning itself. But we don't get to see any alerts during the promotion phase for such elements.
Hope this helps someone.
I am trying to import data from dynamodb console interface, but unable to get success.
Data is
{"_id":{"s":"d9922db0-83ac-11e6-9263-cd3ebf92dec3"},"applicationId":{"S":"2"},"applicationName":{"S":"Paperclip"},"ip":{"S":"127.0.0.1"},"objectInfo":{"S":"elearning_2699"},"referalUrl":{"S":"backported data"},"url":{"S":""},"userAgent":{"S":""},"userEmail":{"S":"karthick.shivanna#test.com"},"userId":{"S":"508521"},"userName":{"S":"Karthik"},"created":{"S":"1486983137000"},"verb":{"S":"submitproject"},"dataVals":{"S":"{\"projectid\":5,\"name\":\"Test 1\",\"domain\":\"apparel\",\"submittype\":[\"Writeup\",\"Screenshots\"],\"passcriteria\":\"Percentage\",\"taemail\":\"bhargava.gade#test.com\",\"attemptNo\":1,\"submitDate\":1467784988}"},"eventTime":{"S":"1467784988000"}}
I am getting below error
Error: java.lang.RuntimeException:
com.amazonaws.AmazonServiceException: Supplied AttributeValue is
empty, must contain exactly one of the supported datatypes (Service:
AmazonDynamoDBv2; Status Code: 400; Error Code: ValidationException;
Request ID: GECS2L57CG9ANLKCSJSB8EIKVRVV4KQNSO5AEMVJF66Q9ASUAAJG) at
org.apache.hadoop.dynamodb.DynamoDBFibonacciRetryer.handleException(DynamoDBFibonacciRetryer.java:107)
at
org.apache.hadoop.dynamodb.DynamoDBFibonacciRetryer.runWithRetry(DynamoDBFibonacciRetryer.java:83)
at
org.apache.hadoop.dynamodb.DynamoDBClient.writeBatch(DynamoDBClient.java:220)
at
org.apache.hadoop.dynamodb.DynamoDBClient.putBatch(DynamoDBClient.java:170)
at
org.apache.hadoop.dynamodb.write.AbstractDynamoDBRecordWriter.write(AbstractDynamoDBRecordWriter.java:91)
at
org.apache.hadoop.mapred.MapTask$DirectMapOutputCollector.collect(MapTask.java:844)
at
org.apache.hadoop.mapred.MapTask$OldOutputCollector.collect(MapTask.java:596)
at org.apache.hadoop.dynamodb.tools.ImportMapper.map(ImportMapper.j
errorStackTrace
amazonaws.datapipeline.taskrunner.TaskExecutionException: Failed to
complete EMR transform. at
amazonaws.datapipeline.activity.EmrActivity.runActivity(EmrActivity.java:67)
at
amazonaws.datapipeline.objects.AbstractActivity.run(AbstractActivity.java:16)
at
amazonaws.datapipeline.taskrunner.TaskPoller.executeRemoteRunner(TaskPoller.java:136)
at
amazonaws.datapipeline.taskrunner.TaskPoller.executeTask(TaskPoller.java:105)
at
amazonaws.datapipeline.taskrunner.TaskPoller$1.run(TaskPoller.java:81)
at
private.com.amazonaws.services.datapipeline.poller.PollWorker.executeWork(PollWorker.java:76)
at
private.com.amazonaws.services.datapipeline.poller.PollWorker.run(PollWorker.java:53)
at java.lang.Thread.run(Thread.java:745) Caused by:
amazonaws.datapipeline.taskrunner.TaskExecutionException: Error:
java.lang.RuntimeException: com.amazonaws.AmazonServiceException:
Supplied AttributeValue is empty, must contain exactly one of the
supported datatypes (Service: AmazonDynamoDBv2; Status Code: 400;
Error Code: ValidationException; Request ID:
GECS2L57CG9ANLKCSJSB8EIKVRVV4KQNSO5AEMVJF66Q9ASUAAJG) at
org.apache.hadoop.dynamodb.DynamoDBFibonacciRetryer.handleException(DynamoDBFibonacciRetryer.java:107)
at
org.apache.hadoop.dynamodb.DynamoDBFibonacciRetryer.runWithRetry(DynamoDBFibonacciRetryer.java:83)
at
org.apache.hadoop.dynamodb.DynamoDBClient.writeBatch(DynamoDBClient.java:220)
at
org.apache.hadoop.dynamodb.DynamoDBClient.putBatch(DynamoDBClient.java:170)
at
org.apache.hadoop.dynamodb.write.AbstractDynamoDBRecordWriter.write(AbstractDynamoDBRecordWriter.java:91)
at
org.apache.hadoop.mapred.MapTask$DirectMapOutputCollector.collect(MapTask.java:844)
at
org.apache.hadoop.mapred.MapTask$OldOutputCollector.collect(MapTask.java:596)
at
org.apache.hadoop.dynamodb.tools.ImportMapper.map(ImportMapper.java:26)
at
org.apache.hadoop.dynamodb.tools.ImportMapper.map(ImportMapper.java:13)
at org.apache.hadoop.mapred.MapRunner.run(MapRunner.java:65) at
org.apache.hadoop.mapred.MapTask.runOldMapper(MapTask.java:432) at
org.apache.hadoop.mapred.MapTask.run(MapTask.java:343) at
org.apache.hadoop.mapred.YarnChild$2.run(YarnChild.java:175) at
java.security.AccessController.doPrivileged(Native Method) at
javax.security.auth.Subject.doAs(Subject.java:415) at
org.apache.hadoop.security.UserGroupInformation.doAs(UserGroupInformation.java:1548)
at org.apache.hadoop.mapred.YarnChild.main(YarnChild.java:170) Caused
by: com.amazonaws.AmazonServiceException: Supplied AttributeValue is
empty, must contain exactly one of the supported datatypes (Service:
AmazonDynamoDBv2; Status Code: 400; Error Code: ValidationException;
Request ID: GECS2L57CG9ANLKCSJSB8EIKVRVV4KQNSO5AEMVJF66Q9ASUAAJG) at
com.amazonaws.http.AmazonHttpClient.handleErrorResponse(AmazonHttpClient.java:1182)
at
com.amazonaws.http.AmazonHttpClient.executeOneRequest(AmazonHttpClient.java:770)
at
com.amazonaws.http.AmazonHttpClient.executeHelper(AmazonHttpClient.java:489)
at
com.amazonaws.http.AmazonHttpClient.execute(AmazonHttpClient.java:310)
at
com.amazonaws.services.dynamodbv2.AmazonDynamoDBClient.invoke(AmazonDynamoDBClient.java:1772)
at
com.amazonaws.services.dynamodbv2.AmazonDynamoDBClient.batchWriteItem(AmazonDynamoDBClient.java:730)
at amazonaws.datapipeline.cluster.EmrUtil.runSteps(EmrUtil.java:286)
at
amazonaws.datapipeline.activity.EmrActivity.runActivity(EmrActivity.java:63)
Am I doing anything wrong?
Error: java.lang.RuntimeException: com.amazonaws.AmazonServiceException: Supplied AttributeValue is empty, must contain exactly one of the supported datatypes (Service: AmazonDynamoDBv2; Status Code: 400; Error Code: ValidationException This is the error you are getting.
Below are the possible reasons
DynamoDB does not support empty value, so you should remove those
fields (agree with #notionquest)
Field's value should have proper data type as per table
just updating here in case someone come across this again.Empty String and Binary attribute values are allowed
Attribute values of type String and Binary must have a length greater than zero if the attribute is used as a key attribute for a table or index.
I'm using Data pipeline with release label emr-5.23.0 and also encoutered the same problem. I solve it by using lower letter instead of capital letter for the Typing in the dynamo item. E.g instead of 'S' use 's', instead of 'N' use 'n'.
We have to go through step by step here. The above error occurred because the values for some of the attributes are empty. DynamoDB doesn't support empty value for the attributes.
Example: url, userAgent etc.
Please remove the empty attributes and try again. I can assure that the above issue will be resolved. However, something else could be wrong as well.
In my case , I got the same issue because of invalid parameter sends from
mapping template.
#set($inputRoot = $input.path('$'))
{
"userId": "$input.params('userId')",
"userEmail": "$input.params('userEmail')",
"userName": "$input.params('userName')",
"userPassword": "$input.params('userPassword')"
}
Here I sent extra parameter userId , that's why error occurred .
And for blank value , When you add an item, the primary key attribute(s) are the only required attributes. Attribute values cannot be null. String and Binary type attributes must have lengths greater than zero. Set type attributes cannot be empty. Requests with empty values will be rejected with a ValidationException exception.
Please check this document .
http://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_PutItem.html
I hope it will help you.
I had the same problem running a restore pipeline in aws. After looking for a while I found the problem. The AMI version of the restore was different from the export one.
I have other pipelines which work fine. I still don't know why in one case it didn't. Basically, I checked the AMI versions, they were 3.8.0 for the export one and 3.9.0 for the restore one. I change the restore to 3.8.0 and it works.
Here you will find a better explanation.
My two cents.
Use camel case, For example:
{"id":{"S":"123xyz"},"ip":{"S":"127.0.0.1"},"attempt":{"N":"10"},"allowed":{"BOOL":true}}
to
{"id":{"s":"123xyz"},"ip":{"s":"127.0.0.1"},"attempt":{"n":"10"},"allowed":{"bOOL":true}}
This is also one of the reasons for above error.
I have asked another question with almost same scenario, A catch 22 in generating 999 file
Basically, I am inbounding HIPPA 837 files and am required to generate 999 response file.
Today I inbounded a file with ST02 element missing.
The TA1 created with Accept status, cause it only cares ISA-IEA level and that part is good.
BizTalk inbounded the file, found the issue, and actually generated a 999 message, but it failed to send out as a physical file because:
Unable to read the stream produced by the pipeline.
Details: Error: 1 (Field level error)
SegmentID: AK2
Position in TS: 3
Data Element ID: AK202
Position in Segment: 2
Data Value:
1: Mandatory data element missing
So here's the catch 22: A 999 should be created to report error for this incoming 837 file, The 999's AK202 is a required field reference to incoming file's transactionnumber defined in ST02.
And the error of the incoming file is it is missing this ST02.
Now, for this scenario, it ends up with an accept TA1 and a pending message in BizTalk messageBox.
In our trading partners view, they send a file and ONLY get a TA1 response with accept status.
My question goes here:
1. Which is the right file to report this kind of error (ST02 missing), TA1 or 999?
Is there anyway to bypass this error and have the 999 created?
There's an RFI on this at x12.org: http://rfi.x12.org/Request/Details/55?stateViewModel=WPC.RFI.Models.ViewModels.RequestViewModel
The TLDR version: you should reject the entire functional group, and use the control identifier from the functional group in AK202.
Here's the relevant text:
Description
What Segments/Data Elements should be used in the 997 when reporting an error in ST02 (Transaction Set Control Number) when the error is related to syntax or min/max? If you attempt to create a 997 back to the submitter with the inbound data from ST02 in AK202 of the 997 you would be creating an invalid 997 transaction. It appears there may be a gap in the 997 standard for reporting errors at this level. If we have misinterpreted the use of the transaction and it can be reported, please let us know how.
Response
Data elements AK102 and AK202 located within transaction set 997 and transaction set 999 are to be used to convey the values of control numbers in the functional group or transaction sets being acknowledged. If including a copy of the value of a data element in the 997 or 999 would cause a syntax violation in the 997 or 999, then if the violation is to be reported at the level at which it was found it must be reported at the next higher level.
Recommendation
The official response to a formal RFI is a letter from the current ASC X12 chair. This website often displays a summary of the RFI. Click here to view a PDF of the letter for this RFI.
When reporting errors after the syntactic analysis of the transaction set, the data analyzed must be able to be reported within the acknowledgment. While data element AK404 supports reporting the value of a data element that fails syntactic analysis without violating the syntax of the 997, the same does not apply to AK202. There are two generally accepted methods of acknowledging transaction sets: 1) acknowledge all transaction sets within the functional group or 2) acknowledge only those transaction sets containing errors. It is not recommended to accept a functional group with errors if the transaction set control number in error cannot be reported in AK202. For the example in your request, the appropriate action is to reject the entire functional group containing the ST02 value which when echoed in AK202 would create a syntactically invalid 997. In addition, the same logic applies to the functional group control number;, the appropriate action is to reject the entire interchange containing the syntactically invalid data.
I am getting the following error "Error: 1 (Field level error) SegmentID: MOA Position in TS: 13 Data Element ID: C51602 Position in Segment: 2 Position in Field: 2 Data Value: 0.0000"
I tried using the option in agreement tab allowing Leading Zeros (see below)
Any other things I could try and see. I am really stuck here.
To be clear about this, your trading partner is technically sending you invalid EDI. The guidance is specifically that non-significant digits be suppressed so "0.0000" is out of compliance.
So, the correct way to resolve this is to contact your trading partner and have them correct their output.
If they are unable or unwilling to do this, then yes, you have to disable this rule in the Agreement.
Note, to be sure you're using the correct Agreement, you should disable the Fallback Settings.
I solved this issue by going to EDI Fallback settings and in Validation allowing Leading and Trailing zeroes policy to be Allowed.
There are 2 type of settings: EDI Fallback and X12 Fallback settings. So we need to enable the option in both of them.