Related
I am looking for a CSS selector for the following table:
Peter | male | 34
Susanne | female | 12
Is there any selector to match all TDs containing "male"?
If I read the specification correctly, no.
You can match on an element, the name of an attribute in the element, and the value of a named attribute in an element. I don't see anything for matching content within an element, though.
Looks like they were thinking about it for the CSS3 spec but it didn't make the cut.
:contains() CSS3 selector http://www.w3.org/TR/css3-selectors/#content-selectors
Using jQuery:
$('td:contains("male")')
You'd have to add a data attribute to the rows called data-gender with a male or female value and use the attribute selector:
HTML:
<td data-gender="male">...</td>
CSS:
td[data-gender="male"] { ... }
There is actually a very conceptual basis for why this hasn't been implemented. It is a combination of basically 3 aspects:
The text content of an element is effectively a child of that element
You cannot target the text content directly
CSS does not allow for ascension with selectors
These 3 together mean that by the time you have the text content you cannot ascend back to the containing element, and you cannot style the present text. This is likely significant as descending only allows for a singular tracking of context and SAX style parsing. Ascending or other selectors involving other axes introduce the need for more complex traversal or similar solutions that would greatly complicate the application of CSS to the DOM.
You could set content as data attribute and then use attribute selectors, as shown here:
/* Select every cell matching the word "male" */
td[data-content="male"] {
color: red;
}
/* Select every cell starting on "p" case insensitive */
td[data-content^="p" i] {
color: blue;
}
/* Select every cell containing "4" */
td[data-content*="4"] {
color: green;
}
<table>
<tr>
<td data-content="Peter">Peter</td>
<td data-content="male">male</td>
<td data-content="34">34</td>
</tr>
<tr>
<td data-content="Susanne">Susanne</td>
<td data-content="female">female</td>
<td data-content="14">14</td>
</tr>
</table>
You can also use jQuery to easily set the data-content attributes:
$(function(){
$("td").each(function(){
var $this = $(this);
$this.attr("data-content", $this.text());
});
});
As CSS lacks this feature you will have to use JavaScript to style cells by content. For example with XPath's contains:
var elms = document.evaluate( "//td[contains(., 'male')]", node, null, XPathResult.UNORDERED_NODE_SNAPSHOT_TYPE, null )
Then use the result like so:
for ( var i=0 ; i < elms.snapshotLength; i++ ){
elms.snapshotItem(i).style.background = "pink";
}
https://jsfiddle.net/gaby_de_wilde/o7bka7Ls/9/
As of Jan 2021, there IS something that will do just this. :has() ... only one catch: this is not supported in any browser yet
Example: The following selector matches only elements that directly contain an child:
a:has(> img)
References:
https://developer.mozilla.org/en-US/docs/Web/CSS/:has
https://caniuse.com/?search=has
I'm afraid this is not possible, because the content is no attribute nor is it accessible via a pseudo class. The full list of CSS3 selectors can be found in the CSS3 specification.
For those who are looking to do Selenium CSS text selections, this script might be of some use.
The trick is to select the parent of the element that you are looking for, and then search for the child that has the text:
public static IWebElement FindByText(this IWebDriver driver, string text)
{
var list = driver.FindElement(By.CssSelector("#RiskAddressList"));
var element = ((IJavaScriptExecutor)driver).ExecuteScript(string.Format(" var x = $(arguments[0]).find(\":contains('{0}')\"); return x;", text), list);
return ((System.Collections.ObjectModel.ReadOnlyCollection<IWebElement>)element)[0];
}
This will return the first element if there is more than one since it's always one element, in my case.
Excellent answers all around, but I think I can add something that worked for me in a practical scenario: exploiting the aria-label attribute for CSS.
For the readers that don't know: aria-label is an attribute that is used in conjunction with other similar attributes to let a screen-reader know what something is, in case someone with a visual impairment is using your website. Many websites add these attributes to elements with images or text in them, as "descriptors".
This makes it highly website-specific, but in case your element contains this, it's fairly simple to select that element using the content of the attribute:
HTML:
<td aria-label="male">Male</td>
<td aria-label="female">Female</td>
CSS:
td[aria-label="male"] {
outline: 1px dotted green;
}
This is technically the same thing as using the data-attribute solution, but this will work for you if you are not the author of the website, plus this is not some out-of-the-way solution that is specifically designed to support this use case; it's fairly common on its own. The one downside of it is that there's really no guarantee that your intended element will have this attribute present.
If you don't create the DOM yourself (e.g. in a userscript) you can do the following with pure JS:
for ( td of document.querySelectorAll('td') ) {
console.debug("text:", td, td.innerText)
td.setAttribute('text', td.innerText)
}
for ( td of document.querySelectorAll('td[text="male"]') )
console.debug("male:", td, td.innerText)
<table>
<tr>
<td>Peter</td>
<td>male</td>
<td>34</td>
</tr>
<tr>
<td>Susanne</td>
<td>female</td>
<td>12</td>
</tr>
</table>
Console output
text: <td> Peter
text: <td> male
text: <td> 34
text: <td> Susanne
text: <td> female
text: <td> 12
male: <td text="male"> male
Most of the answers here try to offer alternative to how to write the HTML code to include more data because at least up to CSS3 you cannot select an element by partial inner text. But it can be done, you just need to add a bit of vanilla JavaScript, notice since female also contains male it will be selected:
cells = document.querySelectorAll('td');
console.log(cells);
[].forEach.call(cells, function (el) {
if(el.innerText.indexOf("male") !== -1){
//el.click(); click or any other option
console.log(el)
}
});
<table>
<tr>
<td>Peter</td>
<td>male</td>
<td>34</td>
</tr>
<tr>
<td>Susanne</td>
<td>female</td>
<td>14</td>
</tr>
</table>
<table>
<tr>
<td data-content="Peter">Peter</td>
<td data-content="male">male</td>
<td data-content="34">34</td>
</tr>
<tr>
<td data-conten="Susanne">Susanne</td>
<td data-content="female">female</td>
<td data-content="14">14</td>
</tr>
</table>
I agree the data attribute (voyager's answer) is how it should be handled, BUT, CSS rules like:
td.male { color: blue; }
td.female { color: pink; }
can often be much easier to set up, especially with client-side libs like angularjs which could be as simple as:
<td class="{{person.gender}}">
Just make sure that the content is only one word! Or you could even map to different CSS class names with:
<td ng-class="{'masculine': person.isMale(), 'feminine': person.isFemale()}">
For completeness, here's the data attribute approach:
<td data-gender="{{person.gender}}">
If you're using Chimp / Webdriver.io, they support a lot more CSS selectors than the CSS spec.
This, for example, will click on the first anchor that contains the words "Bad bear":
browser.click("a*=Bad Bear");
#voyager's answer about using data-* attribute (e.g. data-gender="female|male" is the most effective and standards compliant approach as of 2017:
[data-gender='male'] {background-color: #000; color: #ccc;}
Pretty much most goals can be attained as there are some albeit limited selectors oriented around text. The ::first-letter is a pseudo-element that can apply limited styling to the first letter of an element. There is also a ::first-line pseudo-element besides obviously selecting the first line of an element (such as a paragraph) also implies that it is obvious that CSS could be used to extend this existing capability to style specific aspects of a textNode.
Until such advocacy succeeds and is implemented the next best thing I could suggest when applicable is to explode/split words using a space deliminator, output each individual word inside of a span element and then if the word/styling goal is predictable use in combination with :nth selectors:
$p = explode(' ',$words);
foreach ($p as $key1 => $value1)
{
echo '<span>'.$value1.'</span>;
}
Else if not predictable to, again, use voyager's answer about using data-* attribute. An example using PHP:
$p = explode(' ',$words);
foreach ($p as $key1 => $value1)
{
echo '<span data-word="'.$value1.'">'.$value1.'</span>;
}
If you want to apply style to the content you want. Easy trick.
td { border: 1px solid black; }
td:empty { background: lime; }
td:empty::after { content: "male"; }
<table>
<tr>
<td>Peter</td>
<td><!--male--></td>
<td>34</td>
</tr>
<tr>
<td>Susanne</td>
<td>female</td>
<td>14</td>
</tr>
</table>
https://jsfiddle.net/hyda8kqz/
I find the attribute option to be your best bet if you don't want to use javascript or jquery.
E.g to style all table cells with the word ready, In HTML do this:
<td status*="ready">Ready</td>
Then in css:
td[status*="ready"] {
color: red;
}
Doing small Filter Widgets like this:
var searchField = document.querySelector('HOWEVER_YOU_MAY_FIND_IT')
var faqEntries = document.querySelectorAll('WRAPPING_ELEMENT .entry')
searchField.addEventListener('keyup', function (evt) {
var testValue = evt.target.value.toLocaleLowerCase();
var regExp = RegExp(testValue);
faqEntries.forEach(function (entry) {
var text = entry.textContent.toLocaleLowerCase();
entry.classList.remove('show', 'hide');
if (regExp.test(text)) {
entry.classList.add('show')
} else {
entry.classList.add('hide')
}
})
})
The syntax of this question looks like Robot Framework syntax.
In this case, although there is no css selector that you can use for contains, there is a SeleniumLibrary keyword that you can use instead.
The Wait Until Element Contains.
Example:
Wait Until Element Contains | ${element} | ${contains}
Wait Until Element Contains | td | male
I am running into issues in getting the alternate rows with 2 different colors. I have a JSON data coming from backend, which is a dynamic array of objects. I need to show the data in the table as in the example here:
https://stackblitz.com/edit/create-xpkbjm?file=app/app.component.html
The odd, even rule that I find in most Stackoverflow questions doesn't seem to work here.
I would like to show the rows with alternate colors(the rows come as groups). The data should be presented similar to the link in the above stackblitz, but each rows should have alternate color. The odd, even rule only work for each group, but doesn't alternate the color in the table as a whole.
You can do this with plain old css,
tr:nth-child(2n) {
background: lightgray;
}
You can update the object that you're using to loop over and create the table.
Currently, you're using two loops,
one over tbody with groups
and one over tr with group.events
Instead, you can create another variable that is a list of events,
// app.component.ts
events = this.groups.map(g => g.events).flat();
Which simplifies your HTML to,
<!-- app.component.html -->
<tr *ngFor="let event of events; index as i">
<td>
{{event.event}}
</td>
</tr>
Check on stackblitz
UPDATE:
You can track total elements using a group/count property on each event across the whole object like so,
//app.component.ts
constructor() {
this.createGroups();
}
createGroups() {
let count = 0;
this.groups.forEach(g => {
g.events.forEach(e => {
e.group = count++;
});
});
console.log(this.groups);
}
And then use [ngClass] to bind a css class based on this property,
<tbody>
<tr *ngFor="let group of groups; index as i">
<table>
<tbody>
<tr *ngIf="i!==0">
<td></td>
</tr>
<tr *ngFor="let event of group.events;" [ngClass]="{'even': event.group % 2 !== 0}">
<td>{{event.event}} {{event.group}}</td>
</tr>
</tbody>
</table>
</tr>
</tbody>
Updated stackblitz
You can do this using pure CSS without the need to modify the angular.
tbody tr
{
background-color: #FFFFFF;
color: #fff;
}
tbody tr:nth-child(odd)
{
background-color: #000000;
color: #fff;
}
I am looking for a CSS selector for the following table:
Peter | male | 34
Susanne | female | 12
Is there any selector to match all TDs containing "male"?
If I read the specification correctly, no.
You can match on an element, the name of an attribute in the element, and the value of a named attribute in an element. I don't see anything for matching content within an element, though.
Looks like they were thinking about it for the CSS3 spec but it didn't make the cut.
:contains() CSS3 selector http://www.w3.org/TR/css3-selectors/#content-selectors
Using jQuery:
$('td:contains("male")')
You'd have to add a data attribute to the rows called data-gender with a male or female value and use the attribute selector:
HTML:
<td data-gender="male">...</td>
CSS:
td[data-gender="male"] { ... }
There is actually a very conceptual basis for why this hasn't been implemented. It is a combination of basically 3 aspects:
The text content of an element is effectively a child of that element
You cannot target the text content directly
CSS does not allow for ascension with selectors
These 3 together mean that by the time you have the text content you cannot ascend back to the containing element, and you cannot style the present text. This is likely significant as descending only allows for a singular tracking of context and SAX style parsing. Ascending or other selectors involving other axes introduce the need for more complex traversal or similar solutions that would greatly complicate the application of CSS to the DOM.
You could set content as data attribute and then use attribute selectors, as shown here:
/* Select every cell matching the word "male" */
td[data-content="male"] {
color: red;
}
/* Select every cell starting on "p" case insensitive */
td[data-content^="p" i] {
color: blue;
}
/* Select every cell containing "4" */
td[data-content*="4"] {
color: green;
}
<table>
<tr>
<td data-content="Peter">Peter</td>
<td data-content="male">male</td>
<td data-content="34">34</td>
</tr>
<tr>
<td data-content="Susanne">Susanne</td>
<td data-content="female">female</td>
<td data-content="14">14</td>
</tr>
</table>
You can also use jQuery to easily set the data-content attributes:
$(function(){
$("td").each(function(){
var $this = $(this);
$this.attr("data-content", $this.text());
});
});
As CSS lacks this feature you will have to use JavaScript to style cells by content. For example with XPath's contains:
var elms = document.evaluate( "//td[contains(., 'male')]", node, null, XPathResult.UNORDERED_NODE_SNAPSHOT_TYPE, null )
Then use the result like so:
for ( var i=0 ; i < elms.snapshotLength; i++ ){
elms.snapshotItem(i).style.background = "pink";
}
https://jsfiddle.net/gaby_de_wilde/o7bka7Ls/9/
As of Jan 2021, there IS something that will do just this. :has() ... only one catch: this is not supported in any browser yet
Example: The following selector matches only elements that directly contain an child:
a:has(> img)
References:
https://developer.mozilla.org/en-US/docs/Web/CSS/:has
https://caniuse.com/?search=has
I'm afraid this is not possible, because the content is no attribute nor is it accessible via a pseudo class. The full list of CSS3 selectors can be found in the CSS3 specification.
For those who are looking to do Selenium CSS text selections, this script might be of some use.
The trick is to select the parent of the element that you are looking for, and then search for the child that has the text:
public static IWebElement FindByText(this IWebDriver driver, string text)
{
var list = driver.FindElement(By.CssSelector("#RiskAddressList"));
var element = ((IJavaScriptExecutor)driver).ExecuteScript(string.Format(" var x = $(arguments[0]).find(\":contains('{0}')\"); return x;", text), list);
return ((System.Collections.ObjectModel.ReadOnlyCollection<IWebElement>)element)[0];
}
This will return the first element if there is more than one since it's always one element, in my case.
Excellent answers all around, but I think I can add something that worked for me in a practical scenario: exploiting the aria-label attribute for CSS.
For the readers that don't know: aria-label is an attribute that is used in conjunction with other similar attributes to let a screen-reader know what something is, in case someone with a visual impairment is using your website. Many websites add these attributes to elements with images or text in them, as "descriptors".
This makes it highly website-specific, but in case your element contains this, it's fairly simple to select that element using the content of the attribute:
HTML:
<td aria-label="male">Male</td>
<td aria-label="female">Female</td>
CSS:
td[aria-label="male"] {
outline: 1px dotted green;
}
This is technically the same thing as using the data-attribute solution, but this will work for you if you are not the author of the website, plus this is not some out-of-the-way solution that is specifically designed to support this use case; it's fairly common on its own. The one downside of it is that there's really no guarantee that your intended element will have this attribute present.
If you don't create the DOM yourself (e.g. in a userscript) you can do the following with pure JS:
for ( td of document.querySelectorAll('td') ) {
console.debug("text:", td, td.innerText)
td.setAttribute('text', td.innerText)
}
for ( td of document.querySelectorAll('td[text="male"]') )
console.debug("male:", td, td.innerText)
<table>
<tr>
<td>Peter</td>
<td>male</td>
<td>34</td>
</tr>
<tr>
<td>Susanne</td>
<td>female</td>
<td>12</td>
</tr>
</table>
Console output
text: <td> Peter
text: <td> male
text: <td> 34
text: <td> Susanne
text: <td> female
text: <td> 12
male: <td text="male"> male
Most of the answers here try to offer alternative to how to write the HTML code to include more data because at least up to CSS3 you cannot select an element by partial inner text. But it can be done, you just need to add a bit of vanilla JavaScript, notice since female also contains male it will be selected:
cells = document.querySelectorAll('td');
console.log(cells);
[].forEach.call(cells, function (el) {
if(el.innerText.indexOf("male") !== -1){
//el.click(); click or any other option
console.log(el)
}
});
<table>
<tr>
<td>Peter</td>
<td>male</td>
<td>34</td>
</tr>
<tr>
<td>Susanne</td>
<td>female</td>
<td>14</td>
</tr>
</table>
<table>
<tr>
<td data-content="Peter">Peter</td>
<td data-content="male">male</td>
<td data-content="34">34</td>
</tr>
<tr>
<td data-conten="Susanne">Susanne</td>
<td data-content="female">female</td>
<td data-content="14">14</td>
</tr>
</table>
I agree the data attribute (voyager's answer) is how it should be handled, BUT, CSS rules like:
td.male { color: blue; }
td.female { color: pink; }
can often be much easier to set up, especially with client-side libs like angularjs which could be as simple as:
<td class="{{person.gender}}">
Just make sure that the content is only one word! Or you could even map to different CSS class names with:
<td ng-class="{'masculine': person.isMale(), 'feminine': person.isFemale()}">
For completeness, here's the data attribute approach:
<td data-gender="{{person.gender}}">
If you're using Chimp / Webdriver.io, they support a lot more CSS selectors than the CSS spec.
This, for example, will click on the first anchor that contains the words "Bad bear":
browser.click("a*=Bad Bear");
#voyager's answer about using data-* attribute (e.g. data-gender="female|male" is the most effective and standards compliant approach as of 2017:
[data-gender='male'] {background-color: #000; color: #ccc;}
Pretty much most goals can be attained as there are some albeit limited selectors oriented around text. The ::first-letter is a pseudo-element that can apply limited styling to the first letter of an element. There is also a ::first-line pseudo-element besides obviously selecting the first line of an element (such as a paragraph) also implies that it is obvious that CSS could be used to extend this existing capability to style specific aspects of a textNode.
Until such advocacy succeeds and is implemented the next best thing I could suggest when applicable is to explode/split words using a space deliminator, output each individual word inside of a span element and then if the word/styling goal is predictable use in combination with :nth selectors:
$p = explode(' ',$words);
foreach ($p as $key1 => $value1)
{
echo '<span>'.$value1.'</span>;
}
Else if not predictable to, again, use voyager's answer about using data-* attribute. An example using PHP:
$p = explode(' ',$words);
foreach ($p as $key1 => $value1)
{
echo '<span data-word="'.$value1.'">'.$value1.'</span>;
}
If you want to apply style to the content you want. Easy trick.
td { border: 1px solid black; }
td:empty { background: lime; }
td:empty::after { content: "male"; }
<table>
<tr>
<td>Peter</td>
<td><!--male--></td>
<td>34</td>
</tr>
<tr>
<td>Susanne</td>
<td>female</td>
<td>14</td>
</tr>
</table>
https://jsfiddle.net/hyda8kqz/
I find the attribute option to be your best bet if you don't want to use javascript or jquery.
E.g to style all table cells with the word ready, In HTML do this:
<td status*="ready">Ready</td>
Then in css:
td[status*="ready"] {
color: red;
}
Doing small Filter Widgets like this:
var searchField = document.querySelector('HOWEVER_YOU_MAY_FIND_IT')
var faqEntries = document.querySelectorAll('WRAPPING_ELEMENT .entry')
searchField.addEventListener('keyup', function (evt) {
var testValue = evt.target.value.toLocaleLowerCase();
var regExp = RegExp(testValue);
faqEntries.forEach(function (entry) {
var text = entry.textContent.toLocaleLowerCase();
entry.classList.remove('show', 'hide');
if (regExp.test(text)) {
entry.classList.add('show')
} else {
entry.classList.add('hide')
}
})
})
The syntax of this question looks like Robot Framework syntax.
In this case, although there is no css selector that you can use for contains, there is a SeleniumLibrary keyword that you can use instead.
The Wait Until Element Contains.
Example:
Wait Until Element Contains | ${element} | ${contains}
Wait Until Element Contains | td | male
I am looking for a CSS selector for the following table:
Peter | male | 34
Susanne | female | 12
Is there any selector to match all TDs containing "male"?
If I read the specification correctly, no.
You can match on an element, the name of an attribute in the element, and the value of a named attribute in an element. I don't see anything for matching content within an element, though.
Looks like they were thinking about it for the CSS3 spec but it didn't make the cut.
:contains() CSS3 selector http://www.w3.org/TR/css3-selectors/#content-selectors
Using jQuery:
$('td:contains("male")')
You'd have to add a data attribute to the rows called data-gender with a male or female value and use the attribute selector:
HTML:
<td data-gender="male">...</td>
CSS:
td[data-gender="male"] { ... }
There is actually a very conceptual basis for why this hasn't been implemented. It is a combination of basically 3 aspects:
The text content of an element is effectively a child of that element
You cannot target the text content directly
CSS does not allow for ascension with selectors
These 3 together mean that by the time you have the text content you cannot ascend back to the containing element, and you cannot style the present text. This is likely significant as descending only allows for a singular tracking of context and SAX style parsing. Ascending or other selectors involving other axes introduce the need for more complex traversal or similar solutions that would greatly complicate the application of CSS to the DOM.
You could set content as data attribute and then use attribute selectors, as shown here:
/* Select every cell matching the word "male" */
td[data-content="male"] {
color: red;
}
/* Select every cell starting on "p" case insensitive */
td[data-content^="p" i] {
color: blue;
}
/* Select every cell containing "4" */
td[data-content*="4"] {
color: green;
}
<table>
<tr>
<td data-content="Peter">Peter</td>
<td data-content="male">male</td>
<td data-content="34">34</td>
</tr>
<tr>
<td data-content="Susanne">Susanne</td>
<td data-content="female">female</td>
<td data-content="14">14</td>
</tr>
</table>
You can also use jQuery to easily set the data-content attributes:
$(function(){
$("td").each(function(){
var $this = $(this);
$this.attr("data-content", $this.text());
});
});
As CSS lacks this feature you will have to use JavaScript to style cells by content. For example with XPath's contains:
var elms = document.evaluate( "//td[contains(., 'male')]", node, null, XPathResult.UNORDERED_NODE_SNAPSHOT_TYPE, null )
Then use the result like so:
for ( var i=0 ; i < elms.snapshotLength; i++ ){
elms.snapshotItem(i).style.background = "pink";
}
https://jsfiddle.net/gaby_de_wilde/o7bka7Ls/9/
As of Jan 2021, there IS something that will do just this. :has() ... only one catch: this is not supported in any browser yet
Example: The following selector matches only elements that directly contain an child:
a:has(> img)
References:
https://developer.mozilla.org/en-US/docs/Web/CSS/:has
https://caniuse.com/?search=has
I'm afraid this is not possible, because the content is no attribute nor is it accessible via a pseudo class. The full list of CSS3 selectors can be found in the CSS3 specification.
For those who are looking to do Selenium CSS text selections, this script might be of some use.
The trick is to select the parent of the element that you are looking for, and then search for the child that has the text:
public static IWebElement FindByText(this IWebDriver driver, string text)
{
var list = driver.FindElement(By.CssSelector("#RiskAddressList"));
var element = ((IJavaScriptExecutor)driver).ExecuteScript(string.Format(" var x = $(arguments[0]).find(\":contains('{0}')\"); return x;", text), list);
return ((System.Collections.ObjectModel.ReadOnlyCollection<IWebElement>)element)[0];
}
This will return the first element if there is more than one since it's always one element, in my case.
Excellent answers all around, but I think I can add something that worked for me in a practical scenario: exploiting the aria-label attribute for CSS.
For the readers that don't know: aria-label is an attribute that is used in conjunction with other similar attributes to let a screen-reader know what something is, in case someone with a visual impairment is using your website. Many websites add these attributes to elements with images or text in them, as "descriptors".
This makes it highly website-specific, but in case your element contains this, it's fairly simple to select that element using the content of the attribute:
HTML:
<td aria-label="male">Male</td>
<td aria-label="female">Female</td>
CSS:
td[aria-label="male"] {
outline: 1px dotted green;
}
This is technically the same thing as using the data-attribute solution, but this will work for you if you are not the author of the website, plus this is not some out-of-the-way solution that is specifically designed to support this use case; it's fairly common on its own. The one downside of it is that there's really no guarantee that your intended element will have this attribute present.
If you don't create the DOM yourself (e.g. in a userscript) you can do the following with pure JS:
for ( td of document.querySelectorAll('td') ) {
console.debug("text:", td, td.innerText)
td.setAttribute('text', td.innerText)
}
for ( td of document.querySelectorAll('td[text="male"]') )
console.debug("male:", td, td.innerText)
<table>
<tr>
<td>Peter</td>
<td>male</td>
<td>34</td>
</tr>
<tr>
<td>Susanne</td>
<td>female</td>
<td>12</td>
</tr>
</table>
Console output
text: <td> Peter
text: <td> male
text: <td> 34
text: <td> Susanne
text: <td> female
text: <td> 12
male: <td text="male"> male
Most of the answers here try to offer alternative to how to write the HTML code to include more data because at least up to CSS3 you cannot select an element by partial inner text. But it can be done, you just need to add a bit of vanilla JavaScript, notice since female also contains male it will be selected:
cells = document.querySelectorAll('td');
console.log(cells);
[].forEach.call(cells, function (el) {
if(el.innerText.indexOf("male") !== -1){
//el.click(); click or any other option
console.log(el)
}
});
<table>
<tr>
<td>Peter</td>
<td>male</td>
<td>34</td>
</tr>
<tr>
<td>Susanne</td>
<td>female</td>
<td>14</td>
</tr>
</table>
<table>
<tr>
<td data-content="Peter">Peter</td>
<td data-content="male">male</td>
<td data-content="34">34</td>
</tr>
<tr>
<td data-conten="Susanne">Susanne</td>
<td data-content="female">female</td>
<td data-content="14">14</td>
</tr>
</table>
I agree the data attribute (voyager's answer) is how it should be handled, BUT, CSS rules like:
td.male { color: blue; }
td.female { color: pink; }
can often be much easier to set up, especially with client-side libs like angularjs which could be as simple as:
<td class="{{person.gender}}">
Just make sure that the content is only one word! Or you could even map to different CSS class names with:
<td ng-class="{'masculine': person.isMale(), 'feminine': person.isFemale()}">
For completeness, here's the data attribute approach:
<td data-gender="{{person.gender}}">
If you're using Chimp / Webdriver.io, they support a lot more CSS selectors than the CSS spec.
This, for example, will click on the first anchor that contains the words "Bad bear":
browser.click("a*=Bad Bear");
#voyager's answer about using data-* attribute (e.g. data-gender="female|male" is the most effective and standards compliant approach as of 2017:
[data-gender='male'] {background-color: #000; color: #ccc;}
Pretty much most goals can be attained as there are some albeit limited selectors oriented around text. The ::first-letter is a pseudo-element that can apply limited styling to the first letter of an element. There is also a ::first-line pseudo-element besides obviously selecting the first line of an element (such as a paragraph) also implies that it is obvious that CSS could be used to extend this existing capability to style specific aspects of a textNode.
Until such advocacy succeeds and is implemented the next best thing I could suggest when applicable is to explode/split words using a space deliminator, output each individual word inside of a span element and then if the word/styling goal is predictable use in combination with :nth selectors:
$p = explode(' ',$words);
foreach ($p as $key1 => $value1)
{
echo '<span>'.$value1.'</span>;
}
Else if not predictable to, again, use voyager's answer about using data-* attribute. An example using PHP:
$p = explode(' ',$words);
foreach ($p as $key1 => $value1)
{
echo '<span data-word="'.$value1.'">'.$value1.'</span>;
}
If you want to apply style to the content you want. Easy trick.
td { border: 1px solid black; }
td:empty { background: lime; }
td:empty::after { content: "male"; }
<table>
<tr>
<td>Peter</td>
<td><!--male--></td>
<td>34</td>
</tr>
<tr>
<td>Susanne</td>
<td>female</td>
<td>14</td>
</tr>
</table>
https://jsfiddle.net/hyda8kqz/
I find the attribute option to be your best bet if you don't want to use javascript or jquery.
E.g to style all table cells with the word ready, In HTML do this:
<td status*="ready">Ready</td>
Then in css:
td[status*="ready"] {
color: red;
}
Doing small Filter Widgets like this:
var searchField = document.querySelector('HOWEVER_YOU_MAY_FIND_IT')
var faqEntries = document.querySelectorAll('WRAPPING_ELEMENT .entry')
searchField.addEventListener('keyup', function (evt) {
var testValue = evt.target.value.toLocaleLowerCase();
var regExp = RegExp(testValue);
faqEntries.forEach(function (entry) {
var text = entry.textContent.toLocaleLowerCase();
entry.classList.remove('show', 'hide');
if (regExp.test(text)) {
entry.classList.add('show')
} else {
entry.classList.add('hide')
}
})
})
The syntax of this question looks like Robot Framework syntax.
In this case, although there is no css selector that you can use for contains, there is a SeleniumLibrary keyword that you can use instead.
The Wait Until Element Contains.
Example:
Wait Until Element Contains | ${element} | ${contains}
Wait Until Element Contains | td | male
I am looking for a CSS selector for the following table:
Peter | male | 34
Susanne | female | 12
Is there any selector to match all TDs containing "male"?
If I read the specification correctly, no.
You can match on an element, the name of an attribute in the element, and the value of a named attribute in an element. I don't see anything for matching content within an element, though.
Looks like they were thinking about it for the CSS3 spec but it didn't make the cut.
:contains() CSS3 selector http://www.w3.org/TR/css3-selectors/#content-selectors
Using jQuery:
$('td:contains("male")')
You'd have to add a data attribute to the rows called data-gender with a male or female value and use the attribute selector:
HTML:
<td data-gender="male">...</td>
CSS:
td[data-gender="male"] { ... }
There is actually a very conceptual basis for why this hasn't been implemented. It is a combination of basically 3 aspects:
The text content of an element is effectively a child of that element
You cannot target the text content directly
CSS does not allow for ascension with selectors
These 3 together mean that by the time you have the text content you cannot ascend back to the containing element, and you cannot style the present text. This is likely significant as descending only allows for a singular tracking of context and SAX style parsing. Ascending or other selectors involving other axes introduce the need for more complex traversal or similar solutions that would greatly complicate the application of CSS to the DOM.
You could set content as data attribute and then use attribute selectors, as shown here:
/* Select every cell matching the word "male" */
td[data-content="male"] {
color: red;
}
/* Select every cell starting on "p" case insensitive */
td[data-content^="p" i] {
color: blue;
}
/* Select every cell containing "4" */
td[data-content*="4"] {
color: green;
}
<table>
<tr>
<td data-content="Peter">Peter</td>
<td data-content="male">male</td>
<td data-content="34">34</td>
</tr>
<tr>
<td data-content="Susanne">Susanne</td>
<td data-content="female">female</td>
<td data-content="14">14</td>
</tr>
</table>
You can also use jQuery to easily set the data-content attributes:
$(function(){
$("td").each(function(){
var $this = $(this);
$this.attr("data-content", $this.text());
});
});
As CSS lacks this feature you will have to use JavaScript to style cells by content. For example with XPath's contains:
var elms = document.evaluate( "//td[contains(., 'male')]", node, null, XPathResult.UNORDERED_NODE_SNAPSHOT_TYPE, null )
Then use the result like so:
for ( var i=0 ; i < elms.snapshotLength; i++ ){
elms.snapshotItem(i).style.background = "pink";
}
https://jsfiddle.net/gaby_de_wilde/o7bka7Ls/9/
As of Jan 2021, there IS something that will do just this. :has() ... only one catch: this is not supported in any browser yet
Example: The following selector matches only elements that directly contain an child:
a:has(> img)
References:
https://developer.mozilla.org/en-US/docs/Web/CSS/:has
https://caniuse.com/?search=has
I'm afraid this is not possible, because the content is no attribute nor is it accessible via a pseudo class. The full list of CSS3 selectors can be found in the CSS3 specification.
For those who are looking to do Selenium CSS text selections, this script might be of some use.
The trick is to select the parent of the element that you are looking for, and then search for the child that has the text:
public static IWebElement FindByText(this IWebDriver driver, string text)
{
var list = driver.FindElement(By.CssSelector("#RiskAddressList"));
var element = ((IJavaScriptExecutor)driver).ExecuteScript(string.Format(" var x = $(arguments[0]).find(\":contains('{0}')\"); return x;", text), list);
return ((System.Collections.ObjectModel.ReadOnlyCollection<IWebElement>)element)[0];
}
This will return the first element if there is more than one since it's always one element, in my case.
Excellent answers all around, but I think I can add something that worked for me in a practical scenario: exploiting the aria-label attribute for CSS.
For the readers that don't know: aria-label is an attribute that is used in conjunction with other similar attributes to let a screen-reader know what something is, in case someone with a visual impairment is using your website. Many websites add these attributes to elements with images or text in them, as "descriptors".
This makes it highly website-specific, but in case your element contains this, it's fairly simple to select that element using the content of the attribute:
HTML:
<td aria-label="male">Male</td>
<td aria-label="female">Female</td>
CSS:
td[aria-label="male"] {
outline: 1px dotted green;
}
This is technically the same thing as using the data-attribute solution, but this will work for you if you are not the author of the website, plus this is not some out-of-the-way solution that is specifically designed to support this use case; it's fairly common on its own. The one downside of it is that there's really no guarantee that your intended element will have this attribute present.
If you don't create the DOM yourself (e.g. in a userscript) you can do the following with pure JS:
for ( td of document.querySelectorAll('td') ) {
console.debug("text:", td, td.innerText)
td.setAttribute('text', td.innerText)
}
for ( td of document.querySelectorAll('td[text="male"]') )
console.debug("male:", td, td.innerText)
<table>
<tr>
<td>Peter</td>
<td>male</td>
<td>34</td>
</tr>
<tr>
<td>Susanne</td>
<td>female</td>
<td>12</td>
</tr>
</table>
Console output
text: <td> Peter
text: <td> male
text: <td> 34
text: <td> Susanne
text: <td> female
text: <td> 12
male: <td text="male"> male
Most of the answers here try to offer alternative to how to write the HTML code to include more data because at least up to CSS3 you cannot select an element by partial inner text. But it can be done, you just need to add a bit of vanilla JavaScript, notice since female also contains male it will be selected:
cells = document.querySelectorAll('td');
console.log(cells);
[].forEach.call(cells, function (el) {
if(el.innerText.indexOf("male") !== -1){
//el.click(); click or any other option
console.log(el)
}
});
<table>
<tr>
<td>Peter</td>
<td>male</td>
<td>34</td>
</tr>
<tr>
<td>Susanne</td>
<td>female</td>
<td>14</td>
</tr>
</table>
<table>
<tr>
<td data-content="Peter">Peter</td>
<td data-content="male">male</td>
<td data-content="34">34</td>
</tr>
<tr>
<td data-conten="Susanne">Susanne</td>
<td data-content="female">female</td>
<td data-content="14">14</td>
</tr>
</table>
I agree the data attribute (voyager's answer) is how it should be handled, BUT, CSS rules like:
td.male { color: blue; }
td.female { color: pink; }
can often be much easier to set up, especially with client-side libs like angularjs which could be as simple as:
<td class="{{person.gender}}">
Just make sure that the content is only one word! Or you could even map to different CSS class names with:
<td ng-class="{'masculine': person.isMale(), 'feminine': person.isFemale()}">
For completeness, here's the data attribute approach:
<td data-gender="{{person.gender}}">
If you're using Chimp / Webdriver.io, they support a lot more CSS selectors than the CSS spec.
This, for example, will click on the first anchor that contains the words "Bad bear":
browser.click("a*=Bad Bear");
#voyager's answer about using data-* attribute (e.g. data-gender="female|male" is the most effective and standards compliant approach as of 2017:
[data-gender='male'] {background-color: #000; color: #ccc;}
Pretty much most goals can be attained as there are some albeit limited selectors oriented around text. The ::first-letter is a pseudo-element that can apply limited styling to the first letter of an element. There is also a ::first-line pseudo-element besides obviously selecting the first line of an element (such as a paragraph) also implies that it is obvious that CSS could be used to extend this existing capability to style specific aspects of a textNode.
Until such advocacy succeeds and is implemented the next best thing I could suggest when applicable is to explode/split words using a space deliminator, output each individual word inside of a span element and then if the word/styling goal is predictable use in combination with :nth selectors:
$p = explode(' ',$words);
foreach ($p as $key1 => $value1)
{
echo '<span>'.$value1.'</span>;
}
Else if not predictable to, again, use voyager's answer about using data-* attribute. An example using PHP:
$p = explode(' ',$words);
foreach ($p as $key1 => $value1)
{
echo '<span data-word="'.$value1.'">'.$value1.'</span>;
}
If you want to apply style to the content you want. Easy trick.
td { border: 1px solid black; }
td:empty { background: lime; }
td:empty::after { content: "male"; }
<table>
<tr>
<td>Peter</td>
<td><!--male--></td>
<td>34</td>
</tr>
<tr>
<td>Susanne</td>
<td>female</td>
<td>14</td>
</tr>
</table>
https://jsfiddle.net/hyda8kqz/
I find the attribute option to be your best bet if you don't want to use javascript or jquery.
E.g to style all table cells with the word ready, In HTML do this:
<td status*="ready">Ready</td>
Then in css:
td[status*="ready"] {
color: red;
}
Doing small Filter Widgets like this:
var searchField = document.querySelector('HOWEVER_YOU_MAY_FIND_IT')
var faqEntries = document.querySelectorAll('WRAPPING_ELEMENT .entry')
searchField.addEventListener('keyup', function (evt) {
var testValue = evt.target.value.toLocaleLowerCase();
var regExp = RegExp(testValue);
faqEntries.forEach(function (entry) {
var text = entry.textContent.toLocaleLowerCase();
entry.classList.remove('show', 'hide');
if (regExp.test(text)) {
entry.classList.add('show')
} else {
entry.classList.add('hide')
}
})
})
The syntax of this question looks like Robot Framework syntax.
In this case, although there is no css selector that you can use for contains, there is a SeleniumLibrary keyword that you can use instead.
The Wait Until Element Contains.
Example:
Wait Until Element Contains | ${element} | ${contains}
Wait Until Element Contains | td | male