I got the issue when I was doing project on the Launchpad MSP430F5529 using Energia IDE and my environment is Ubuntu 18.04. The attachment picture is the issue's screenshot. Could anyone tell me how to fix it?
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x0 pc=0x83ea54]
goroutine 1 [running]:
github.com/arduino/arduino-cli/legacy/builder.ResolveLibrary(0xc000112c00, 0xc0001e8195, 0x8, 0xc0001e8195)
/Users/robertinant/go/src/github.com/arduino/arduino-cli/legacy/builder/resolve_library.go:64 +0x1d4
github.com/arduino/arduino-cli/legacy/builder.findIncludesUntilDone(0xc000112c00, 0xc0001d3020, 0x977300, 0xc0001d4d20, 0xc00006cfc0, 0xc00000d600, 0x0)
/Users/robertinant/go/src/github.com/arduino/arduino-cli/legacy/builder/container_find_includes.go:358 +0x3db
github.com/arduino/arduino-cli/legacy/builder.(*ContainerFindIncludes).Run(0xf9f300, 0xc000112c00, 0xf9f300, 0x0)
/Users/robertinant/go/src/github.com/arduino/arduino-cli/legacy/builder/container_find_includes.go:152 +0x4e6
github.com/arduino/arduino-cli/legacy/builder.runCommands(0xc000112c00, 0xc000171c20, 0x20, 0x20, 0x1, 0x5da80, 0xfa0be0)
/Users/robertinant/go/src/github.com/arduino/arduino-cli/legacy/builder/builder.go:210 +0xdf
github.com/arduino/arduino-cli/legacy/builder.(*Builder).Run(0xc000067e70, 0xc000112c00, 0xf9f1f0, 0xc00006d8c0)
/Users/robertinant/go/src/github.com/arduino/arduino-cli/legacy/builder/builder.go:117 +0xd28
github.com/arduino/arduino-cli/legacy/builder.RunBuilder(...)
/Users/robertinant/go/src/github.com/arduino/arduino-cli/legacy/builder/builder.go:226
main.main()
/Users/robertinant/go/src/github.com/arduino/arduino-builder/main.go:398 +0x804
/home/shao/Downloads/energia-1.8.10E23/arduino-builder returned 2
Error compiling for board MSP-EXP430F5529LP.
the issue I met screenshot
Related
I am using cluster to run a job. In my mpi launch command, I used -IBV (not -ibv) option, which I think is to make it uses the Infiniband.
But some of the job will end up self-killed with error messages in the stderr as follow (a long list of identical message, so I just copy one for each type):
ls-dyna_R9.2.0_s: Rank 0:11: MPI_Isend: 722 dereg_trypin failed: id
0x0, 0x7f0742de7694,1150916
ls-dyna_R9.2.0_s: Rank 0:11: MPI_Recv: 722 dereg_trypin failed: id
0x0, 0x7f0742de7694,1150916
ls-dyna_R9.2.0_s: Rank 0:11: MPI_Wait: 722 dereg_trypin failed: id
0x0, 0x7f0742de7694,1150916
and then finally it ends with:
ls-dyna_R9.2.0_s: Rank 0:11: MPI_Wait: 722 dereg_trypin failed: id
0x0, 0x7f0742de7694,1150916
ls-dyna_R9.2.0_s: Rank 0:11: MPI_Wait: ln1313: ibv_reg_mr() failed:
addr 0x7f0742de7694, len 1150916
ls-dyna_R9.2.0_s: Rank 0:11: MPI_Wait: Internal MPI error
If I use option -TCP (not -tcp), this will not occur for the same job.
I want to solve the problem, but I do not understand the error message, nor do I know what is wrong with the MPI.
Can anyone provide some advises?
I am trying to upload a sketch and getting below error:
Except the usual connection my GPIO 0 is grounded.
Arduino: 1.8.1 (Windows 10), Board: "Generic ESP8266 Module, 80 MHz, 40MHz,
DOUT, 115200, 512K (64K SPIFFS), ck, Serial1, All"
Sketch uses 232813 bytes (53%) of program storage space. Maximum is 434160 bytes
Global variables use 34092 bytes (41%) of dynamic memory, leaving 47828 bytes for local variables. Maximum is 81920 bytes.
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
warning: espcomm_sync failed
error: espcomm_open failed
error: espcomm_upload_mem failed
You must have a bad connection. I recommend that you follow this scheme that I leave here.
ESP01 connection with Arduino UNO
You can also consult this complete guide on the ESP01 (https://programarfacil.com/podcast/como-configurar-esp01-wifi-esp8266/) that although it is in Spanish, is very simple to follow.
Make sure GPIO 0 is grounded, and then reset the ESP8266. Also make sure you have 3.3v coming in to CH_PD and RST. Set baud rate to 115200 unless you changed it already.
I am trying the esp8266 esp-01, and did all it asked on the Arduino IDE side, but I am having problems compiling and building the blink example into the board
Using: FT232RL usb-ttl in the 3.3v configuration, two 1.6v (new) batteries to power the esp, and all the conections as indicated here (not using the led though).
when I hit (go) it compiles, but as it transfers both boards blink synchronously and I receive the following errors:
O sketch usa 219.479 bytes (50%) de espaço de armazenamento para programas. O máximo são 434.160 bytes.
Variáveis globais usam 31.172 bytes (38%) de memória dinâmica, deixando 50.748 bytes para variáveis locais. O máximo são 81.920 bytes.
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
error: failed reading byte
warning: espcomm_send_command: cant receive slip payload data
warning: espcomm_sync failed
error: espcomm_open failed
error: espcomm_upload_mem failed
It looks to me as a newbie that it's trying to establish a link and failing. What could it be?
The configurations are default, programmer is "AVRISP MKII"
On raspbian , I can't run a program linked with libcrypto from gdb. It doesn't matter what the program contains. Example:
(gdb) r
Starting program: /home/pi/test/test
Program received signal SIGILL, Illegal instruction.
0x400844c0 in ?? () from /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.0
(gdb) signal SIGILL
Continuing with signal SIGILL.
Cannot access memory at address 0x0
Program received signal SIGILL, Illegal instruction.
0x400844c8 in ?? () from /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.0
(gdb) signal SIGILL
Continuing with signal SIGILL.
Cannot access memory at address 0x0
[Inferior 1 (process 1566) exited normally]
(gdb)
*
I am showing ads in my application and getting following crash from most of the user's. Does anyone know about it?
signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr 0x0
eax 00000000 ebx b7677c74 ecx bf94b510 edx 00000000
esi aa24b9a1 edi bf94b6a8
xcs 00000073 xds 0000007b xes 0000007b xfs 00000007 xss 0000007b
eip b75dc610 ebp b464e2b0 esp bf94b5d0 flags 00210282
backtrace:
#00 pc 000e2610 /system/lib/libandroid_runtime.so (GraphicsJNI::getNativeCanvas(_JNIEnv*, _jobject*)+48)
#01 pc 00001744 /system/lib/libwebviewchromium_plat_support.so
#02 pc 001fa460 /system/lib/libwebviewchromium.so
#03 pc 001d0838 /system/lib/libwebviewchromium.so
#04 pc 001e4ae6 /system/lib/libwebviewchromium.so
#05 pc 0000b86c /data/dalvik-cache/x86/system#app#webview#webview.apk#classes.dex