Suppose I have 5 feature files and have 60 scenarios. I have triggered a batch run of 60 scenarios(with specific tag). Now, I need to get the Total count of Scenarios running and If Suppose 30 scenarios got executed. How to get that count if the scenarios got executed.
Now we need to get the scenarios count present in feature file which we are running( we will know 1 scenarios is running but we need to know total scenarios count= Running + not running one)
Any help is really appreciated
Is there any cucumber features that can satisfy the above condition.
Related
Let's say you have a small project. The team has estimated all the tasks as 300 days of effort.
I have 5 developers in the team, and I want MS Project to tell me when the project will complete considering vacations and working schedule of my team member.
In order to do that:
I'm creating a Task "Development" with fixed work "300d", and task type "Fixed Work".
Then I create 5 resources, and specify a 2 week vacation for one of the developers somewhere in the middle of the schedule.
Then I assign my 5 development resources to this task.
The problem is, the 300d distributed evenly to all 5 development resources. And If one of them have a two weeks vacation in between, due to that particular resource the work will be finished 2 weeks later, where other 4 resources are sitting and doing nothing for 2 weeks. Total duration is 70 days.
what I get
What I want to get is: work is distributed accordingly through all 5 resources unevenly in a way that the whole task finishes as earlier as possible taking most of the usable time from all developers.
That's how I would expect it to work. In that particular case I was distributing hours manually.
what i would expect
Is there a possibility in MS Project to do something like this? Or am I doing something wrong?
There are a couple issues with how you are approaching the problem.
1. Rather than just planning out the manpower hours estimated to be needed for the entire project on a single line item, You should plan out the tasks that will need to be done to accomplish "Small Project"
If you discretely plan out the tasks that need to be accomplished to satisfy the scope of "Small project", you can establish dependency (predecessor/successor) relationships between your tasks and figure out what tasks need to be done before you can move on to others. When you do this it will give you a good idea of how long the total duration of the project will take and likely be more accurate than just relying on an estimate based on the manpower hours estimate your developers give you. Find out what tasks they actually need to do, not just how many hours they think the whole project will take them. This will also allow you to plan out the utilization of your resources better because you'll be able to assign specific resources to specific tasks, and not all of your resources need to be on every task.
2. In general I would avoid using the Task Usage form.
I noticed you are altering resources in the task usage form, but unless you are really experienced with Microsoft Project I would avoid ever touching that, as it's really easy to set the period of performance of resources assigned to a task to be different than the actual period of performance of the task itself. This will cause MS Project to behave unusually, and it can be hard for an unexperienced user to understand why. This usually leads to pain and frustration. This leads me to my next bit of advice:
3. If you really want to specify a resource's vacation time, it's better to adjust the calendar associated the resource to exclude those dates as working dates.
In your situation with only 5 resources on your project, this can be fairly easy to do. You can accomplish this 2 different ways (I'll start with the easiest option):
1. You can add resource specific exclusion dates to the default calendar in your project
You can accomplish this by opening the Resource Sheet table and then clicking the Project tab then Change Working Times. If you have the Resource Sheet open instead of the Gantt chart, you can specify the resource that is going to be effected by the exceptions:
In this example you can see that I would be excluding (removing) 8/23/21 thru 9/3/21 as working days for the SW Engineer resource, without needing to change the calendar used by the resource completely.
2. You can completely change the calendar used by particular resources to be different than the default calendar set for the project.
You can accomplish this by going into the Resource Sheet and opening the Base Calendar column:
From here you can assign any calendar that exists in the project to the resource. Of course this means you would need to create the calendars and assign exclusion dates to them.
To create a calendar, click the Project tab then click Change Working Times. Click Create New Calendar on the form that opens up and give it a name:
From there you can add exclusion dates and all that.
Note: In a larger project with many resources, I would recommend not messing with the calendar for the resources at all. It just gets hard to deal with when there are a lot of resources.
We have a couple of environments still running Time Series Insights Preview version. This is really fast and we are really satisfied by it. However, new environments really seem a lot slower with the official release. Warm path extraction is a lot slower, but still doable, while cold path extraction becomes unbearable.
EDIT: We need to add &storeType=WarmStore if we would like to query warm data. Cool! This works really fast again! Question about cold store still persists:
It is hard to compare the different environments, because the datasets are not exactly the same, but for our new environment we have about 4.5 TB sensor data imported in TSI.
The following screenshot shows a query that tries to retrieve one minute of data for one device (each device only sends data each 10 seconds) in the far past of 2018. However, the server returns the call after 30 seconds with a continuationtoken, saying it couldn't retrieve all the 6 values in time. Sometimes it manages to return all 6 of the values, but it still takes 30 seconds.
My internet download speed, while performing the query, was over 80 Mb per second, so that shouldn't be an issue either.
Is this something we should be worried about in the new release?
please submit a support ticket through the Azure portal with all of these details and the product team will investigate.
I am having one ADF pipeline which runs USQL jobs with 1 AU. Its scheduled for daily once. normally it was taking around 30 minutes to complete the job. But now days I can see that jobs are taking more than 3 - 4 hours to completed the job. I can see that now days it is allocating more vertices to the job. So to compare I ran same old job. You can see below differences.
1) first Job -
https://cmndatadevdl01.azuredatalakeanalytics.net/jobLink/a3071c07-4b90-4f17-8dab-ba16764d9165
It is running with 5815 vertices with 1 AUs and completes in 28 minutes
2) second job -
https://cmndatadevdl01.azuredatalakeanalytics.net/Jobs/07e41502-3785-4f87-97d0-7682d544864b?api-version=2015-10-01-preview
I am running same above job with 5 AUS to save my time which completes in 46 minutes. I am running same code but it is using 42,330 vertices why?
3) third job
https://cmndatadevdl01.azuredatalakeanalytics.net/jobLink/c0037de7-6ba4-4aa5-9938-c7ba17b5edeb
This is almost same job but little different input but it takes 42173 vertices and complete in 4.4 hours with 1 AUs
I think there is something wrong with Azure data lake analytics account now days. I am facing this issue from couple of days. Around one week before everything was working fine. Please help me to resolve this issue
unfortunately, we do not have access to your job links.
The number of vertices depends among other things primarily on the number of files, their size and - if you use tables - the number of distributions, partitions, and - often overlooked but very important - the number of table fragment that you may have generated while inserting into the tables.
Can you tell us more about your data?
Are you querying files? What format (e.g., JSON, CSV etc)? Did they grow in number or size?
Are you querying tables? Are you inserting into them frequently? When did you last rebuild the table or table partition?
I wrote a script to run for an Alfresco rule. but I want the script to run after specific time ( I need the script to run after 1 week). any solution?
I read about Scheduled_Actions , is this feature useful?
Yes, in fact a Scheduled Action is likely your only option for for running something after a certain amount of time has elapsed.
At a high level your solution should look something like:
Your rule sets some aspect/property on the relevant node, say ruleDate, which is the date the original rule ran.
A scheduled action runs every day and detects nodes with a ruleDate 7 days or more in the past.
The scheduled action does whatever changes are required.
The scheduled action removes the ruleDate aspect/property.
Yes it is useful. You need to set up cron job to run scheduled task.
You can find more details on this link.
I'm stuck with building my own, simple browser game.
My program: you can upgrade your tools which allow you to gain more points per hour.
My problem:
So for example a user logs in and upgrades his tools from 0 to 1 which would double the amount of points gained. But upgrading takes 2 hours to complete. I don't expect my user to be online for 2 hours so I save the time he was last seen in an SQL table. Now when 2 hours have passed the amount of points gained need to be doubled but it's very possible that the user doesn't visit the page for another 10 hours. So my current program keeps adding 1 point per hour until the user visits the page. So in this case he'd have 12 points. But it needs to multiply after 2 hours so he needs to have 22 points.
Another, maybe simpler example is a maximum amount of points. Let's say the max is 10 points. But the user stays offline for 15 hours which means he'd earn 15 points at a rate of 1pnt/hr.
I don't have any functionally code yet because I want to know if something like this is actually possible and how for example cityVille(facebook) does it.
Now my question:
Can anyone give me a tip or give me some info on how to get started at this or at least give me the name of what I'm searching for? I've tried google'ing things like "offline database interactions" or "changing variables without user request" but nothing useful comes up.
Thanks in advance,
BlaDrzz.
You can schedule jobs with SQL server. These jobs can run at whatever frequency you like.
http://technet.microsoft.com/en-us/library/ms191439.aspx