I am trying to upgrade several physical servers from RHEL 7.9 to linux rocky 8.6.
So far the process was successful on 3-4 servers.
On the server that I have the issue everything works fine and when I reboot the server then I choose to boot with ELevate-Upgrade-Initramfs.
Running:
leapp preupgrade
come back without any errors
After that I am running:
leapp upgrade
and it completes without any issues. I do a reboot and after choosing "ELevate-Upgrade-Initramfs", is trying to do the upgrade and it fails.
Here is the last part of the leapp-upgrade.log
Oct 05 10:24:01 localhost upgrade[691]: ==> Processing phase `InitRamStart`
Oct 05 10:24:01 localhost upgrade[691]: ====> * remove_upgrade_boot_entry
Oct 05 10:24:01 localhost upgrade[691]: Remove boot entry for Leapp provided initramfs.
Oct 05 10:24:02 localhost upgrade[691]: ==> Processing phase `LateTests`
Oct 05 10:24:02 localhost upgrade[691]: ====> * persistentnetnamesinitramfs
Oct 05 10:24:02 localhost upgrade[691]: Get network interface information for physical ethernet interfaces with the new kernel in initramfs.
Oct 05 10:24:02 localhost upgrade[691]: ==> Processing phase `Preparation`
Oct 05 10:24:02 localhost upgrade[691]: ====> * removed_pam_modules_apply
Oct 05 10:24:02 localhost upgrade[691]: Remove old PAM modules that are no longer available in RHEL-8 from
Oct 05 10:24:02 localhost upgrade[691]: ====> * remove_boot_files
Oct 05 10:24:02 localhost upgrade[691]: Remove Leapp provided initramfs from boot partition.
Oct 05 10:24:03 localhost upgrade[691]: ====> * selinuxprepare
Oct 05 10:24:03 localhost upgrade[691]: Remove selinux policy customizations before updating selinux-policy* packages
Oct 05 10:24:16 localhost upgrade[691]: ====> * update_etc_sysconfig_kernel
Oct 05 10:24:16 localhost upgrade[691]: Update /etc/sysconfig/kernel file.
Oct 05 10:24:16 localhost upgrade[691]: ====> * applytransactionworkarounds
Oct 05 10:24:16 localhost upgrade[691]: Executes registered workaround scripts on the system before the upgrade transaction
Oct 05 10:24:17 localhost upgrade[1444]: Applying transaction workaround - yum config fix
Oct 05 10:24:17 localhost upgrade[691]: ====> * zipl_convert_to_blscfg
Oct 05 10:24:17 localhost upgrade[691]: Convert the zipl boot loader configuration to the the boot loader specification on s390x systems.
Oct 05 10:24:17 localhost upgrade[691]: ====> * bind_update
Oct 05 10:24:17 localhost upgrade[691]: Actor parsing facts found in configuration and modifing configuration.
Oct 05 10:24:18 localhost upgrade[691]: ==> Processing phase `RPMUpgrade`
Oct 05 10:24:18 localhost upgrade[691]: ====> * prepare_python_workround
Oct 05 10:24:18 localhost upgrade[691]: Prepare environment to be able to run leapp with Python3 in initrd.
Oct 05 10:24:18 localhost upgrade[691]: ====> * dnf_upgrade_transaction
Oct 05 10:24:18 localhost upgrade[691]: Setup and call DNF upgrade command
Oct 05 10:24:29 localhost upgrade[1640]: Last metadata expiration check: 0:10:41 ago on Wed Oct 5 12:13:43 2022.
Oct 05 10:24:29 localhost upgrade[1640]: Dependencies resolved.
Oct 05 10:24:29 localhost upgrade[1640]: ==========================================================================================================================
Oct 05 10:24:29 localhost upgrade[1640]: Package Arch Version Repository Size
Oct 05 10:24:29 localhost upgrade[1640]: ==========================================================================================================================
...
Oct 05 10:24:36 localhost upgrade[1640]: Removing dependent packages:
Oct 05 10:24:36 localhost upgrade[1640]: lz4 i686 1.8.3-1.el7 #System 207 k
Oct 05 10:24:36 localhost upgrade[1640]: python-firewall noarch 0.6.3-13.el7_9 #System 1.9 M
Oct 05 10:24:36 localhost upgrade[1640]: python2-dnf noarch 4.0.9.2-2.el7_9 #System 1.9 M
Oct 05 10:24:36 localhost upgrade[1640]: python2-libcomps x86_64 0.1.8-14.el7 #System 140 k
Oct 05 10:24:36 localhost upgrade[1640]: Downgrading:
Oct 05 10:25:24 localhost upgrade[1640]: atk x86_64 2.28.1-1.el8 rocky8-appstream 2Process Process-216:
Oct 05 10:25:24 localhost upgrade[1640]: Traceback (most recent call last):
Oct 05 10:25:24 localhost upgrade[1640]: File "/usr/lib64/python2.7/multiprocessing/process.py", line 258, in _bootstrap
Oct 05 10:25:24 localhost upgrade[1640]: self.run()
Oct 05 10:25:24 localhost upgrade[1640]: File "/usr/lib64/python2.7/multiprocessing/process.py", line 114, in run
Oct 05 10:25:24 localhost upgrade[1640]: self._target(*self._args, **self._kwargs)
Oct 05 10:25:24 localhost upgrade[1640]: File "/usr/lib/python2.7/site-packages/leapp/repository/actor_definition.py", line 72, in _do_run
Oct 05 10:25:24 localhost upgrade[1640]: actor_instance.run(*args, **kwargs)
Oct 05 10:25:24 localhost upgrade[1640]: File "/usr/lib/python2.7/site-packages/leapp/actors/__init__.py", line 290, in run
Oct 05 10:25:24 localhost upgrade[1640]: self.process(*args)
Oct 05 10:25:24 localhost upgrade[1640]: File "/usr/share/leapp-repository/repositories/system_upgrade/common/actors/dnfupgradetransaction/actor.py", line 54, in process
Oct 05 10:25:24 localhost upgrade[1640]: plugin_info=plugin_info
Oct 05 10:25:24 localhost upgrade[1640]: File "/usr/share/leapp-repository/repositories/system_upgrade/common/libraries/dnfplugin.py", line 342, in perform_transaction_install
Oct 05 10:25:24 localhost upgrade[1640]: cmd_prefix=cmd_prefix
Oct 05 10:25:24 localhost upgrade[1640]: File "/usr/share/leapp-repository/repositories/system_upgrade/common/libraries/dnfplugin.py", line 219, in _transaction
Oct 05 10:25:24 localhost upgrade[1640]: e.stdout = e.stdout.encode('utf-8', 'xmlcharrefreplace')
Oct 05 10:25:24 localhost upgrade[1640]: AttributeError: can't set attribute
Oct 05 10:25:24 localhost upgrade[1640]: 70 k
Oct 05 10:25:24 localhost upgrade[1640]: irqbalance x86_64 2:1.4.0-6.el8 rocky8-baseos 55 k
Oct 05 10:25:24 localhost upgrade[1640]: libcgroup x86_64 0.41-19.el8 rocky8-baseos 69 k
Oct 05 10:25:24 localhost upgrade[1640]: libcroco x86_64 0.6.12-4.el8_2.1 rocky8-baseos 112 k
Oct 05 10:25:24 localhost upgrade[1640]: nodejs x86_64 1:10.24.0-1.module+el8.3.0+101+f84c7154 rocky8-appstream 8.8 M
Oct 05 10:25:24 localhost upgrade[1640]: Transaction Summary
Then I removed the atk lib from the server .. re execute the leapp upgrade .. and I am getting the same thing for another package
Oct 05 10:43:59 localhost upgrade[1641]: Removing dependent packages:
Oct 05 10:44:44 localhost upgrade[1641]: lz4 Process Process-216:
Oct 05 10:44:44 localhost upgrade[1641]: Traceback (most recent call last):
Oct 05 10:44:44 localhost upgrade[1641]: File "/usr/lib64/python2.7/multiprocessing/process.py", line 258, in _bootstrap
Oct 05 10:44:44 localhost upgrade[1641]: self.run()
Oct 05 10:44:44 localhost upgrade[1641]: File "/usr/lib64/python2.7/multiprocessing/process.py", line 114, in run
Oct 05 10:44:44 localhost upgrade[1641]: self._target(*self._args, **self._kwargs)
Oct 05 10:44:44 localhost upgrade[1641]: File "/usr/lib/python2.7/site-packages/leapp/repository/actor_definition.py", line 72, in _do_run
Oct 05 10:44:44 localhost upgrade[1641]: actor_instance.run(*args, **kwargs)
Oct 05 10:44:44 localhost upgrade[1641]: File "/usr/lib/python2.7/site-packages/leapp/actors/__init__.py", line 290, in run
Oct 05 10:44:44 localhost upgrade[1641]: self.process(*args)
Oct 05 10:44:44 localhost upgrade[1641]: File "/usr/share/leapp-repository/repositories/system_upgrade/common/actors/dnfupgradetransaction/actor.py", line 54, in process
Oct 05 10:44:44 localhost upgrade[1641]: plugin_info=plugin_info
Oct 05 10:44:44 localhost upgrade[1641]: File "/usr/share/leapp-repository/repositories/system_upgrade/common/libraries/dnfplugin.py", line 342, in perform_transaction_install
Oct 05 10:44:44 localhost upgrade[1641]: cmd_prefix=cmd_prefix
Oct 05 10:44:44 localhost upgrade[1641]: File "/usr/share/leapp-repository/repositories/system_upgrade/common/libraries/dnfplugin.py", line 219, in _transaction
Oct 05 10:44:44 localhost upgrade[1641]: e.stdout = e.stdout.encode('utf-8', 'xmlcharrefreplace')
If you need any further log files or output of any command I can provide it.
Thanks
There is a bug in /usr/share/leapp-repository/repositories/system_upgrade/common/libraries/dnfplugin.py. From line 217, it should be
except CalledProcessError as e:
if six.PY3:
e.stdout = e.stdout.encode('utf-8', 'xmlcharrefreplace')
e.stderr = e.stdout.encode('utf-8', 'xmlcharrefreplace')
(so it should test for PY3, not PY2.
Have the exact same problem on the exact same system.
Did the upgrade weeks ago, but had with the programs on this system
problems after the update.
So rolled back and figured out a solution, wanted to update today and now this.
Related
I'm trying to use the gluon iOS-simulator on my Mac (Catalina 10.15.4), using the maven-client-plugin, but I can't get past the man client:compile stage. When I run that, I get the following error in the log file:
[Wed May 06 10:47:01 EDT 2020][INFO] ==================== COMPILE TASK ====================
[Wed May 06 10:47:01 EDT 2020][FINE] PB Command for check version: /Users/bobyetman/graalvm-svm-darwin-20.1.0-ea+26/bin/java -version
[Wed May 06 10:47:01 EDT 2020][FINE] Start process check version...
[Wed May 06 10:47:02 EDT 2020][FINE] [SUB] openjdk version "11.0.5" 2019-10-15
[Wed May 06 10:47:02 EDT 2020][FINE] [SUB] OpenJDK Runtime Environment (build 11.0.5+10-jvmci-19.3-b05-LTS)
[Wed May 06 10:47:02 EDT 2020][FINE] [SUB] OpenJDK 64-Bit Server VM GraalVM 20.1.0-dev (build 11.0.5+10-jvmci-19.3-b05-LTS, mixed mode, sharing)
[Wed May 06 10:47:02 EDT 2020][FINE] Result for check version: 0
[Wed May 06 10:47:02 EDT 2020][INFO] We will now compile your code for x86_64-apple-ios. This may take some time.
[Wed May 06 10:47:02 EDT 2020][FINE] Processing JavaStatic dependencies at /Users/bobyetman/.gluon/substrate/javaStaticSdk/15-ea+2/ios-x86_64/labs-staticjdk/lib/static
[Wed May 06 10:47:02 EDT 2020][FINE] Processing JavaFXStatic dependencies at /Users/bobyetman/.gluon/substrate/javafxStaticSdk/15-ea+gvm16/ios-x86_64/sdk/lib
[Wed May 06 10:47:02 EDT 2020][INFO] Downloading Java Static Libs...
[Wed May 06 10:47:02 EDT 2020][FINE] Processing zip file: url = https://download2.gluonhq.com/substrate/staticjdk/labs-staticjdk-ios-x86_64-gvm-15-ea+2.zip, zip = /Users/bobyetman/.gluon/substrate/labs-staticjdk-ios-x86_64-gvm-15-ea+2.zip, subDir = javaStaticSdk, levels = [15-ea+2, ios-x86_64], md5 = javaStaticSdk-ios-x86_64.md5
[Wed May 06 10:47:02 EDT 2020][SEVERE] Downloading failed: https://download2.gluonhq.com/substrate/staticjdk/labs-staticjdk-ios-x86_64-gvm-15-ea+2.zip
the pom is fairly plain:
<plugin>
<groupId>com.gluonhq</groupId>
<artifactId>client-maven-plugin</artifactId>
<version>0.1.21</version>
<configuration>
<target>ios-sim</target>
<mainClass>com.boby.ClosedKnightFX</mainClass>
<graalvmHome>/Users/bobyetman/graalvm-svm-darwin-20.1.0-ea+26</graalvmHome>
</configuration>
I've cut and pasted the URL to the zip file into my browser, and it says 'file not found'. If I take out the target, and I can run the app on my Mac, it builds, links, and runs.
Suggestions?
Hello and thanks for taking some of your time to check my problem
i'm following the detailed steps by openstack to install openstack in no avail (https://docs.openstack.org/keystone/rocky/install/keystone-install-rdo.html)
I've tried to change the 5000 port for the service but the result is the same
any insights are most welcomed
[root#localhost i-openstack]# systemctl enable httpd.service
[root#localhost i-openstack]# systemctl start httpd.service
Job for httpd.service failed because the control process exited with error code. See "systemctl status httpd.service" and "journalctl -xe" for details.
[root#localhost i-openstack]# journalctl -xe
Oct 08 05:12:39 localhost.localdomain systemd[1]: Failed to start The Apache HTTP Server.
-- Subject: Unit httpd.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit httpd.service has failed.
--
-- The result is failed.
Oct 08 05:12:39 localhost.localdomain systemd[1]: Unit httpd.service entered failed state.
Oct 08 05:12:39 localhost.localdomain systemd[1]: httpd.service failed.
Oct 08 05:12:39 localhost.localdomain polkitd[1824]: Unregistered Authentication Agent for unix-process:4229:106865 (system bus name :1.42, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Oct 08 05:27:21 localhost.localdomain polkitd[1824]: Registered Authentication Agent for unix-process:4930:195069 (system bus name :1.43 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale
Oct 08 05:27:21 localhost.localdomain systemd[1]: Reloading.
Oct 08 05:27:21 localhost.localdomain polkitd[1824]: Unregistered Authentication Agent for unix-process:4930:195069 (system bus name :1.43, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Oct 08 05:27:26 localhost.localdomain polkitd[1824]: Registered Authentication Agent for unix-process:4950:195568 (system bus name :1.44 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale
Oct 08 05:27:26 localhost.localdomain systemd[1]: Starting The Apache HTTP Server...
-- Subject: Unit httpd.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit httpd.service has begun starting up.
Oct 08 05:27:26 localhost.localdomain httpd[4956]: (13)Permission denied: AH00072: make_sock: could not bind to address [::]:5000
Oct 08 05:27:26 localhost.localdomain httpd[4956]: (13)Permission denied: AH00072: make_sock: could not bind to address 0.0.0.0:5000
Oct 08 05:27:26 localhost.localdomain httpd[4956]: no listening sockets available, shutting down
Oct 08 05:27:26 localhost.localdomain httpd[4956]: AH00015: Unable to open logs
Oct 08 05:27:26 localhost.localdomain systemd[1]: httpd.service: main process exited, code=exited, status=1/FAILURE
Oct 08 05:27:26 localhost.localdomain kill[4958]: kill: cannot find process ""
Oct 08 05:27:26 localhost.localdomain systemd[1]: httpd.service: control process exited, code=exited status=1
Oct 08 05:27:26 localhost.localdomain systemd[1]: Failed to start The Apache HTTP Server.
-- Subject: Unit httpd.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit httpd.service has failed.
--
-- The result is failed.
Oct 08 05:27:26 localhost.localdomain systemd[1]: Unit httpd.service entered failed state.
Oct 08 05:27:26 localhost.localdomain systemd[1]: httpd.service failed.
Oct 08 05:27:26 localhost.localdomain polkitd[1824]: Unregistered Authentication Agent for unix-process:4950:195568 (system bus name :1.44, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Oct 08 05:34:01 localhost.localdomain polkitd[1824]: Registered Authentication Agent for unix-process:5222:235020 (system bus name :1.45 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale
Oct 08 05:34:01 localhost.localdomain systemd[1]: Reloading.
Oct 08 05:34:01 localhost.localdomain polkitd[1824]: Unregistered Authentication Agent for unix-process:5222:235020 (system bus name :1.45, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Oct 08 05:34:03 localhost.localdomain polkitd[1824]: Registered Authentication Agent for unix-process:5240:235248 (system bus name :1.46 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale
Oct 08 05:34:03 localhost.localdomain systemd[1]: Starting The Apache HTTP Server...
-- Subject: Unit httpd.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
SOLUTION : It seemed i had to disable SELinux
Disable temporaliy
sudo setenforce 0
Restart httpd service
service httpd restart
Disable SELinux persistently (reboot required)
nano /etc/selinux/config
SELINUX=disabled
Ok so this happened to me the other day and I was able to resolve it by reinstalling WordPress, my WordPress theme and all of its plugins (took forever)
It has now happened again so I need to get to the root of the issue.
I have a website running on my localhost (using MAMP)
When I visit localhost:8888/ I am able to access my entire file directory.
All other sites on my localhost are loading without issue, except for the site I need to access. I am getting a 500 error in the browser.
When I enable WP Debug it doesn't change from the 500 error in the browser.
I have not modified this site in any way to cause this issue, it literally just randomly bricks itself. The same thing happened before to the exact same site.
I have gone through a ton of guides and am completely lost at what is causing the issue.
Would really appreciate some help troubleshooting.
This is my latest error log from apache.
[Tue Jul 05 14:43:49 2016] [notice] caught SIGTERM, shutting down
[Tue Jul 05 14:43:52 2016] [notice] Digest: generating secret for digest authentication ...
[Tue Jul 05 14:43:52 2016] [notice] Digest: done
[Tue Jul 05 14:43:52 2016] [notice] FastCGI: process manager initialized (pid 1372)
[Tue Jul 05 14:43:52 2016] [notice] Apache/2.2.29 (Unix) mod_wsgi/3.4 Python/2.7.8 PHP/5.5.23 mod_ssl/2.2.29 OpenSSL/0.9.8zh DAV/2 mod_fastcgi/2.4.6 mod_perl/2.0.8 Perl/v5.20.0 configured -- resuming normal operations
[Tue Jul 05 14:44:05 2016] [notice] caught SIGTERM, shutting down
[Tue Jul 05 14:44:07 2016] [notice] Digest: generating secret for digest authentication ...
[Tue Jul 05 14:44:07 2016] [notice] Digest: done
[Tue Jul 05 14:44:07 2016] [notice] FastCGI: process manager initialized (pid 1414)
[Tue Jul 05 14:44:07 2016] [notice] Apache/2.2.29 (Unix) mod_wsgi/3.4 Python/2.7.8 PHP/5.6.7 mod_ssl/2.2.29 OpenSSL/0.9.8zh DAV/2 mod_fastcgi/2.4.6 mod_perl/2.0.8 Perl/v5.20.0 configured -- resuming normal operations
[Tue Jul 05 16:48:35 2016] [error] [client ::1] client denied by server configuration: /Users/brettgolding/Google Drive/htdocs/.DS_Store
I'm using meteor deploy with a little test app, and I'm finding that it sort of works, but doesn't complain about anything in the logs, so I'm not sure what to do next.
For example, the home page doesn't render, while accounts-entry is able to render only the password field of the sign-up page (not the email one)! It's really quite weird.
I'm using the npm package to include a node module, however removing this doesn't seem to make any difference.
I'm not sure where to look next to debug this?
The code is here:
https://github.com/jimmytidey/observatory
The app is here:
http://test_observatory.meteor.com
The logs look absolutely normal I think:
[Sun Jan 05 2014 11:07:59 GMT+0000 (UTC)] INFO HIT / 46.65.36.129
[Sun Jan 05 2014 11:07:59 GMT+0000 (UTC)] INFO HIT /f1db89943c1358003f76977ed6df57e9adf2aaa2.css 46.65.36.129
[Sun Jan 05 2014 11:07:59 GMT+0000 (UTC)] INFO HIT /537d85f650bdfb82439bc7d0c9e073f7b16684d6.js 46.65.36.129
[Sun Jan 05 2014 11:07:59 GMT+0000 (UTC)] INFO HIT /f1db89943c1358003f76977ed6df57e9adf2aaa2.css 46.65.36.129
[Sun Jan 05 2014 11:08:00 GMT+0000 (UTC)] INFO HIT /537d85f650bdfb82439bc7d0c9e073f7b16684d6.js 46.65.36.129
[Sun Jan 05 2014 11:08:48 GMT+0000 (UTC)] INFO HIT / 46.65.36.129
[Sun Jan 05 2014 11:08:53 GMT+0000 (UTC)] INFO HIT /sign-in 46.65.36.129
[Sun Jan 05 2014 11:08:59 GMT+0000 (UTC)] INFO HIT /sign-up 46.65.36.129
[Sun Jan 05 2014 11:09:34 GMT+0000 (UTC)] INFO HIT / 46.65.36.129
[Sun Jan 05 2014 11:09:39 GMT+0000 (UTC)] INFO HIT /sign-up 46.65.36.129
[Sun Jan 05 2014 11:10:51 GMT+0000 (UTC)] INFO HIT /_GALAXY_ 46.65.36.129
The errors seem to be on the client side, see the javascript console on your browser while visiting the page.
Errors with meteor logs only display the errors on the server side
The error seems to be a misspelling in Template.coffee for the word Template. (See https://github.com/jimmytidey/Observatory/blob/master/client/views/home/home.coffee#L1). I sent you a PR too.
This syntax error stops all of the code after it from running. This is why the router does not register its routes and nothing appears on the screen.
Silly typo ;-)
I can access the actual wordpress site via WAMP's localhost route, but I cannot log into the admin/dashboard page of the wordpress site.
I think it is a problem with apache.
Can anybody help me?
here are messages from the apache error logs:
[Sun Nov 03 07:11:17.294107 2013] [mpm_winnt:notice] [pid 2700:tid 416] AH00422: Parent: Received shutdown signal -- Shutting down the server.
[Sun Nov 03 07:11:19.296221 2013] [mpm_winnt:notice] [pid 5784:tid 324] AH00364: Child: All worker threads have exited.
[Sun Nov 03 07:11:19.328223 2013] [mpm_winnt:notice] [pid 2700:tid 416] AH00430: Parent: Child process 5784 exited successfully.
[Sun Nov 03 07:11:22.842424 2013] [mpm_winnt:notice] [pid 5408:tid 416] AH00455: Apache/2.4.4 (Win32) PHP/5.4.16 configured -- resuming normal operations
[Sun Nov 03 07:11:22.842424 2013] [mpm_winnt:notice] [pid 5408:tid 416] AH00456: Server built: Feb 23 2013 13:07:34
[Sun Nov 03 07:11:22.842424 2013] [core:notice] [pid 5408:tid 416] AH00094: Command line: 'c:\\wamp\\bin\\apache\\apache2.4.4\\bin\\httpd.exe -d C:/wamp/bin/apache/Apache2.4.4'
[Sun Nov 03 07:11:22.844424 2013] [mpm_winnt:notice] [pid 5408:tid 416] AH00418: Parent: Created child process 4348
[Sun Nov 03 07:11:24.173500 2013] [mpm_winnt:notice] [pid 4348:tid 324] AH00354: Child: Starting 150 worker threads.
More info:
The error is not a 404. Rather wordpress doesnt recognize my username/password.
final edit:
found a solution to my problem:
http://www.velvetblues.com/web-development-blog/how-to-add-an-admin-user-to-a-wordpress-database/