is there any way to switch language in nextjs without passing language parameter in url like baseurl/ar or baseurl/en ? if I want to change language from dropdown, url should not change.
query parameters are defined by the routes of your api, in this way, when you change the url, a new call is made in the api passing the parameters that were informed in the route.
you can pass objects to the api route, something like:
const response = awai api.get('yourUrl', {language: en})
this way the information will not appear in the url, but this needs to be changed in the backend so that it knows where to get the parameters from.
you can choose to do the translation in json files, and just switch between them too.
Hope this helps.
#NSL
Related
There is a box to configure the "Start URL" in APIFY, but what happens if i don't know the start URL and it depends of my user input? I would like to be able to pass a variable URL to "Start URL"
Configuration of Start URL in APIFY:
I want to pass any URL automatically through an APIFY task and then scrap it.
I tried to make it automatically through Zapier, in the configuration is possible to select the URL input and pass it to APIFY, but finally it stops the task because is not able to read the format passed. Data out log from Zapier:
I think that APIFY probably lets configure dynamic input URL's but by my beginner level, probably there is something that scapes from my knowledge.
I want to be able to pass variable URL's to be scraped by APIFY.
You can check how input looks like in JSON format using Editor/JSON switcher on the top of input configuration.
After you switch to JSON you can easily check the structure of startUrls.
If you want to override startUrls for example in Zapier integration you can do it using Input JSON overrides field in Run Task Apify<>Zapier action.
You can override input same way using API to run the task, where you need to pass JSON as POST payload of the API request.
If you want to read more about Apify<>Zapier integration you can check article Scrape single URL using Zapier.
I want to do something very similar to what's shown in the docs for FSharp.Data:
The URL I'm requesting from though (TFS) requires client authentication. Is there any way I can provide this by propagating my Windows creds? I notice JsonProvider has a few other compile-time parameters, but none seem to be in support of this.
You don't have to provide a live URL as a type parameter to JsonProvider; you can also provide the filename of a sample file that reflects the structure you expect to see. With that feature, you can do the following steps:
First, log in to the service and save a JSON file that reflects the API you're going to use.
Next, do something like the following:
type TfsData = JsonProvider<"/path/to/sample/file.json">
let url = "https://example.com/login/etc"
// Use standard .Net API to log in with your Windows credentials
// Save the results in a variable `jsonResults`
let parsedResults = TfsData.Parse(jsonResults)
printfn "%A" parsedResults.Foo // At this point, Intellisense should work
This is all very generic, of course, since I don't know precisely what you need to do to log in to your service; presumably you already know how to do that. The key is to retrieve the JSON yourself, then use the .Parse() method of your provided type to parse it.
Backbone.js maintains routing information in a URL after the hash mark, e.g.:
http://localhost:3000#page/hardware/table/?action=details&actionTargetId=5&actionTargetName=10.3.177.185&actionTarget=host
Even though the routing information is in the format ?p1=v1&p2=v2&p3=v3, this portion is not technically part of the url query string since it comes after the hash mark.
My question is if I add an actual query string to our app's urls like this:
http://localhost:3000?newparam=newvalue#page/hardware/table/?action=details&actionTargetId=5&actionTargetName=10.3.177.185&actionTarget=host
is there any possibility of the "newparam" url parameter interfering with the backbone portion?
the problem is your not actually creating a legit query string. your mixing your route with your parameters.
your example is formatted as:
domain ? param # route ? other params
as soon as a questionmark appears in a url everything after it is interpreted as a query string. (in this case) even your route.
personally i suggest using the html5 pushstate.
Backbone.history.start({pushState: true})
this will give you clean(er) urls
http://localhost:3000/page/hardware/table/?newparam=newvalue&action=details&actionTargetId=5&actionTargetName=10.3.177.185&actionTarget=host
that will help your routes to not interfere with your parameters.
Here is the thing:
Let's say I have a base URL like this:
www.mysite.com?my_first_param=1&my_second_param=2
But now I want to add a new parameter to my URL:
www.mysite.com?my_first_param=1&my_second_param=2&my_redirect_site=www.myothersite.com
Imagine that I am using a service where they add new tracking parameters to my URL. For example:
first_tracking=value1&second_value=value2
Since my BASE url already has a "?" the parameters are added with a "&", so my final URL would look like this:
www.mysite.com?my_first_param=1&my_second_param=2&my_redirect_site=www.myothersite.com&first_tracking=value1&second_value=value2
This is a correct URL with several parameters, but when I do the redirect to www.myothersite.com, since the parameters start with a "&", they get lost. Would it be correct to add the tracking parameters with a starting "?" ? Like this:
www.mysite.com?my_first_param=1&my_second_param=2&my_redirect_site=www.myothersite.com?first_tracking=value1&second_value=value2
If not, what would be a good approach for dealing with this? I believe is responsibility of the redirect to pass through the tracking parameters to the redirect URL.
You should URLencode each param name and value properly, so if the map of params you want is this:
my_first_param => 1
my_second_param => 2
my_redirect_site => www.myothersite.com?first_tracking=value1&second_value=value2
then you should pass this as the query string:
?my_first_param=1&my_second_param=2&my_redirect_site=www.myothersite.com%3Ffirst_tracking%3Dvalue1%26second_value%3Dvalue2
You should be using a library which does this already to build up URIs to handle this encoding for you.
No, you can't have a second question mark in a URL.
Furthermore, if you have ampersands in the redirect URL, they will be seen as separate parameters for the main URL, and not seen as connected to the redirect URL.
If you want to do a redirect like this, you need to URLEncode the whole of the redirected URL. There are standard functions in most web-facing languages to do this.
Encode the parameter, "?" would be replaced by %3F
It depends on the amount of control you have over the service adding the tracking parameters.
Can you change the url after the parameters have been added?
If you can, then you should use a url builder to add the tracking parameters to your redirect url, then url encode that url entriely, tracking parameters included.
If you are not in control and a third party modifies your url, then you will have to do this when you redirect, read the parameters in the url, take your redirect url and the tracking parameters, add the tracking parameters to the redirect url before redirect.
This seems like the dumbest question ever, but I can't seem to figure it out. I have a page the needs to redirect to a complex route and I can't seem to generate the URL. Redirecting to a simple route is easy enough:
return $this->redirect($this->generateUrl('testnumber'));
However, I want to route to: testnumber/1/question/4. How can I accomplish this incredibly simple task? The only thing I have found in the documentation and Google allows me to add parameters and not just create a complex route. For example:
generateURL('testnumber', array('testid'=>1, 'question'=>4))
makes a URL of /testnumber?testid=1&question=4, which I do not want.
Edit: Yes, I already have the route created in a YML file. I simply cannot generate the URL to link to it.
return $this->redirect($this->generateUrl(???????????),true));
This is my route:
#Route("/testnumber/{testid}/question/{question}", name="testnumber")
The Symfony documentation only shows how to generate a URL to " testnumber/1", I need to generate "testnumber/1/question/4".
For
generateURL('testnumber', array('testid'=>1, 'question'=>4))
to work as you want, your route must look like (example using annotations)
#Route("/testnumber/{testid}/question/{question}", name="testnumber")
If you don't define "testid" & "question" parameters in your route, they'll be added to the query string (appended at the end of the URL as GET paramaters)
generated_route?test_id=X&question=X
Find here more relevent examples.