Cloud you please help me with the correct JQL to build the following automation rule to work:
Whenever an issue is transitioned from status "Assigned" to status "In Progress", run a JQL or Advanced Compare or Lookup issues (or something else) in which to check:
==> IF the assigned user on the issue (current assignee), has the TOTAL number (count) of issues "In Progress" in the project greater than 0
=> THEN : do nothing (and let the user take the issue in progress )
=> ELSE : transition issue from status "In Progress" to status "Assigned"
-- How to make that JQL ?
Thank you very much in advance,
Alex
The trick is to make an automation rule, to lookup issues, and with the following code:
status = "In Progress" AND assignee = {{issue.assignee}}
WARN: The validate query wont work, but the rule as a whole works.
Related
I can write a query in application insights that gives me a percentage as a scalar. I want to create alert if that percentage is > X . How can this be done using log based alerts?
Basically, I have a lot of machines that send telemetry to application insights. Sometimes they log some exceptions. I send MachineName in customDimensions for all the logs. So I can get the names of all the machines that sent logs in last 24 hours. The exceptions are also sent with MachineName in customDimensions. When a particular error is raised by more than X% machines in last 24 hours, I want to raise an alert.
The way to write alert logic is using 'Number of Results' which cannot be used for this since it automatically adds '|count' to the query. The other way is using 'Metric Measurement', which I am guessing should help me raise an alert like this but I'm unable to figure out how.
I can get the total machine count by this query:
let num_machines = traces
| summarize by tostring(customDimensions["MachineName"])
| count;
I can get the number of machines that reported an exception like this:
let num_error_machines = exceptions
| where customDimensions["Message"] contains "ExceptionXRaised"
| summarize by tostring(customDimensions["MachineName"])
| count;
finally, i can get the percentage of machines that raised the issue like this:
print toscalar(num_error_machines)*100/toscalar(num_machines)
I am not sure how to use this result to raise an alert using MetricMeasurement. This needs to be modified somehow to get AggregatedValue and use bin, I am not sure if that is possible / how that query will be.
Sorry for the late reply. I've tested in my side and met many problems indeed.
I found that alert rule doesn't support to monitor the percentage number of the result, it only supports the numbers of query result and Metric measurement. So I think you may give up the percentage and use the num_err_machine like the screenshot below
Pls note, you can't append " ; " at the end of the query or it will give an error like The request had some invalid properties
I'm using the Microsoft Graph SDK for creating Group / Team and set up a Profile Picture.
I realize that I can't set up the Group Photo right after its creation : I have to wait a couple of minutes / hours to update it (and it works of course). Below is the common error met :
Code: ErrorInvalidGroup. Message: The requested group [Group GUID]#[Tenant GUID] is invalid. Inner error
Any idea on the process ? It is a "normal" bug because of a delay of "complete creation" ?
Thx for your answers.
Current Project:
ASP.NET 4.5.2
MVC 5
PayPal API
I am using this example to build myself a PayPal transaction (and yes, my code is virtually identical), as I do not know of any other method that will return the three values in the title.
My main problem is that, the example I am utilizing is much more concise and compact than the one I used for a much older Web Forms application, and as such, I am unsure as to where or even how to grab the three values I need.
My initial thought was to do so right after the ACK, and indeed I was able to obtain the CorrelationId as well as the TimeStamp, but because this was prior to the user being carted off to PayPal’s site (sandbox in this case -- see the return new PayPalRedirect contained within the if), the TransactionId was blank. And in this example, PayPal explicitly redirects the user to a Success page without returning to the Action that sent the user to PayPal in the first place, and I am not seeing any GET values in the URL at all aside from the Token and the PayerId, much less ones that could provide me with the TransactionId.
Suggestions?
I have also looked at the following examples:
For ASP.NET Core, was unsure how to adapt to my current project particularly due to appsettings.json, but it looked quite well done. I really liked how the values were rolled up in lists.
For MVC 4, but I couldn’t find where ACK was being used to determine success or successwithwarning so I couldn’t hook into that.
I have also found the PayPal content to be like trying to drink from a fire hose at full blast -- not only was the content was hopelessly outdated (Web Forms code, FTW!) but there was also so many different examples it would have taken me days to determine which one was most appropriate to use.
Any assistance would be greatly appreciated.
Edit: my initial attempt at modifying the linked code has this portion:
values = Submit(values);
var ack = values["ACK"].ToLower();
if(ack == "success" || ack == "successwithwarning") {
using(_db = new ApplicationDbContext()) {
var updateOrder = await _db.Orders.FirstOrDefaultAsync(x => x.OrderId == order.OrderId);
if(updateOrder != null) {
updateOrder.OrderProcessed = false;
updateOrder.PayPalCorrelationId = values["CORRELATIONID"];
updateOrder.PayPalTransactionId = values["TRANSACTIONID"];
updateOrder.PayPalTimeStamp = values["TIMESTAMP"];
updateOrder.IPAddress = HttpContext.Current.Request.UserHostAddress;
_db.Entry(updateOrder).State = EntityState.Modified;
await _db.SaveChangesAsync();
}
}
return new PayPalRedirect {
Token = values["TOKEN"],
Url = $"https://{PayPalSettings.CgiDomain}/cgi-bin/webscr?cmd=_express-checkout&token={values["TOKEN"]}"
};
}
Everything within and including the using() is my added content. As I mentioned, the CorrelationId and the TimeStamp come through just fine, but I have yet to successfully obtain the TransactionId.
Edit 2:
More problems -- the transactions that are “successful” through the sandbox site (the ReturnUrl is getting called) aren’t reflecting properly on my Facilitator and Buyer accounts, even when I do payments straight from the buyer’s PayPal account (not using the Credit Card). I know I am supposed to see transactions in the Buyer’s account, either through the overall Dev account (Accounts -> Profile -> balance or Accounts -> Notifications) or through the Buyer’s account in the sandbox front end. And yet -- multiple transactions returning me to the ReturnUrl path, and yet no transactions in either.
Edit 3:
Okay, this is really, really weird. I have gone over all settings with a fine-toothed comb, and intentionally introduced errors to see where things should crap out. It turns out that the entire process goes swimmingly - except nothing shows up in my notifications and no amounts get moved between my different accounts (Facilitator and Buyer). It’s like all my transactions are going into /dev/null, yet the process is successful.
Edit 4: A hint!
In the sandbox, where Buyer accepts the transaction, there is a small note, “You will be able to review the transaction before completing it” or something like that -- suggesting that an additional page is not coming up and that the user is being uncerimoniously dumped back to the success page. Why the success page? No clue. But it’s happening.
It sounds like you are only doing the first part of the process.
Express Checkout consists of 3 API calls:
SetExpressCheckout
GetExpressCheckoutDetails
DoExpressCheckoutPayment
SEC generates a token, and then you redirect to PayPal where the user signs in and reviews the transactions before agreeing to pay.
They are then sent to the ReturnURL included in your SEC request, and this is where you'll call GECD in order to obtain all the buyer details that are now available since they signed in.
Using that data you can complete the final DECP request, which is what finalizes the procedure. No money is actually processed until this final call is completed successfully.
I have a website that uses Meteor 0.9. I have deployed this website on OpenShift (http://www.truthpecker.com).
The problem I'm experiencing is that when I go to a path on my site (/discover), then sometimes (though not always), the data needed are not fetched by Meteor. Instead I get the following errors:
On the client side:
WebSocket connection to 'ws://www.truthpecker.com/sockjs/796/3tfowlag/websocket' failed: Error during WebSocket handshake: Unexpected response code: 400
And on the server side:
Exception from sub rD8cj6FGa6bpTDivh Error: Match error: Failed Match.OneOf or Match.Optional validation
at checkSubtree (packages/check/match.js:222)
at check (packages/check/match.js:21)
at _.extend._getFindOptions (packages/mongo-livedata/collection.js:216)
at _.extend.find (packages/mongo-livedata/collection.js:236)
at Meteor.publish.Activities.find.user [as _handler] (app/server/publications.js:41:19)
at maybeAuditArgumentChecks (packages/livedata/livedata_server.js:1492)
at _.extend._runHandler (packages/livedata/livedata_server.js:914)
at _.extend._startSubscription (packages/livedata/livedata_server.js:764)
at _.extend.protocol_handlers.sub (packages/livedata/livedata_server.js:577)
at packages/livedata/livedata_server.js:541
Sanitized and reported to the client as: Match failed [400]
Can anyone help me to eliminate this error and get the site working? I'd be very grateful!
Tony
P.S.: I never got this error using localhost.
EDIT:
The line causing the problem the problem is this (line 41):
return Activities.find({user: id}, {sort: {timeStamp: -1}, limit:40});
One document in the activities collection looks like this:
{
"user" : "ZJrgYm34rR92zg6z7",
"type" : "editArg",
"debId" : "wtziFDS4bB3CCkNLo",
"argId" : "YAnjh2Pu6QESzHQLH",
"timeStamp" : ISODate("2014-09-12T22:10:29.586Z"),
"_id" : "sEDDreehonp67haDg"
}
When I run the query done in line 41 in mongo shell, I get the following error:
error: { "$err" : "Unsupported projection option: timeStamp", "code" : 13097 }
I don't really why this is though. Can you help me there as well? Thank you.
Make sure that you are passing an integer to skip and limit. Use parseInt() if need be.
You have a document on your website that does not match your check validation.
The validation you have is in app/server/publications.js:41
So the attribute in question exists in some way like Match.optional(Match.oneOf(xx)) but the document's attribute is neither of the values in Match.oneOf
You would have to go through your documents for the collection causing this and remove or correct the attribute causing this to match your check statement.
Update for your updated question.
You're running Meteor commands in the meteor mongo/mongo shell. The error you get is unrelated to the problem in Meteor, to sort in the mongo shell you would do activities.find(..).sort(), instead of activities.find(.., { sort : {..}). This is unrelated to the issue
The issue is most-likely that your id is not actually a string. Its supposed to be sEDDreehonp67haDg for the document you're looking for. You might want to use the debugger to see what it actually is.
I don't think you can use limit in client-side find queries. Removing limit from my query solves the problem. If you're looking for pagination, then you can either manually roll your own by passing a parameter to your Activities publication so that the limit is added to the server-side query along with an offset. There is also this pagination package.
I have set up negative testing for an account then set the error code desired as the Transaction Amount Field for example 106.06 to invoke error code 10606 "Buyer cannot pay” no errors are returned the order is processed.
If I try another error code 10539 “This transaction cannot be processed”. An error is return and the order is not processed.
I am using the The US site error codes: http://www.paypalobjects.com/en_US/ebook/PP_APIReference/Appx-ErrorCodes_and_Messages.html and we are in Australia are these the correct error codes?
Any ideas what is causing this? Is this the correct way to use Negative Testing in the sandbox?
Thanks
I know this is late but I stumbled across the answer for me.
You didn't specify the API Name you are working with DoExpressCheckoutPayment and according to Paypal's Negative Testing Docs we are supposed to use an AMT field and
To trigger an error condition on an amount-related field, specify a error code value as a number with two digits to the right of the decimal point. For example, specify a value of 107.55 to trigger the 10755 error.
I found their information to be completely false! What I finally got working was to use PAYMENTREQUEST_0_AMT and NOT use a decimal.
So here is what I came up with
USER={yourUID}&
PWD={yourPSWD}&
SIGNATURE={yourSig}&
TOKEN={yourToken}&
METHOD=DoExpressCheckoutPayment&
VERSION=119&
PAYMENTREQUEST_0_AMT=10486
Edit:
I later found a better option specifically for the Payment Method Refused (10486) that I mentioned above. Take a look: https://developer.paypal.com/docs/classic/express-checkout/ht_ec_fundingfailure10486/#testing-saleorauth