I'm on MacPro OS 10.12 (can not be upgraded to 10.13 or beyond bc HW is old!) and I get below error.
Any help please
Thanks
Task start deno run -A --watch=static/,routes/ dev.ts
Watcher Process started.
The manifest has been generated for 3 routes and 1 islands.
Server listening on http://localhost:3000
dyld: Symbol not found: _SecTrustEvaluateWithError
Referenced from: /Users/kemalgencay/Library/Caches/esbuild/bin/esbuild-darwin-
64#0.14.39
Expected in: flat namespace
An error occured during route handling or page rendering. Error: The service was
stopped
at https://deno.land/x/esbuild#v0.14.39/mod.js:1304:25
at https://deno.land/x/esbuild#v0.14.39/mod.js:633:9
at afterClose (https://deno.land/x/esbuild#v0.14.39/mod.js:611:7)
at https://deno.land/x/esbuild#v0.14.39/mod.js:1844:11
error: Uncaught (in promise) BrokenPipe: Broken pipe (os error 32)
Watcher Process finished. Restarting on file change...
"devDependencies": {
"esbuild-wasm":"latest"
},
"overrides": {
"esbuild":"npm:esbuild-wasm#latest"
}
Just add this to the package.json
And then run: npm install
Hope it helps!
Related
I am trying the new R package rhino from the Appsilon team to build shiny apps.
Running on a Windows10 laptop I installed the dependencies node.js and yarn as described in this tutorial.
Here is the output of rhino::diagnostics() :
Windows 10 x64 build 19042
R version 4.1.0 (2021-05-18)
rhino: 1.0.0
node: v16.15.0
yarn: 1.22.15
Running rhino::build_sass() gives me this error:
yarn run v1.22.15
$ sass --no-source-map --style=compressed root/app/styles/main.scss:root/app/static/css/app.min.css
Error reading root\app\styles\main.scss: no such file or directory.
error Command failed with exit code 66.
info Visit https://yarnpkg.com/en/docs/cli/run for documentation about this command.
Error:
! System command 'yarn' exited with status 66.
i If you can't use Node.js and yarn, try using sass: 'r' configuration.
Run `rlang::last_error()` to see where the error occurred.
I am puzzled by the paths in the call to "sass" that start with "root/app". My app is located in my home directory:
"C:/Users/XXX/Documents/workspace/rhino_dummy"
Is it possible that these paths are wrong in the call?
Luckily, the suggested alternative with the deprecated libsass interpreter works for the sass example in the tutorial. It would be nice to have node.js with sass working on Windows10 for future more complex apps.
Edit 1, after Kat's comment
Thanks Kat for the quick feedback. I added sass via yarn add sass and tried again same error:
> rhino::build_sass()
yarn run v1.22.15
warning ..\..\package.json: No license field
$ sass --no-source-map --style=compressed root/app/styles/main.scss:root/app/static/css/app.min.css
Error reading root\app\styles\main.scss: no such file or directory.
error Command failed with exit code 66.
info Visit https://yarnpkg.com/en/docs/cli/run for documentation about this command.
Error:
! System command 'yarn' exited with status 66.
i If you can't use Node.js and yarn, try using sass: 'r' configuration.
Run `rlang::last_error()` to see where the error occurred.
The warning is coming from the pckage.json file that was created by calling yarn inside my R project folder. It has only minimal content:
# package.json
{
"dependencies": {
"sass": "^1.51.0"
}
}
Out of curiosity, I tried to compile the javascript example, also failed with very similar error regarding folder paths:
> rhino::build_js()
yarn run v1.22.15
warning ..\..\package.json: No license field
$ webpack
assets by status 0 bytes [cached] 1 asset
ERROR in main
Module not found: Error: Can't resolve 'C:\Users\XXX\Documents\workspace\rhino_dummy\.rhino\node\root\app\js\index.js' in 'C:\Users\XXX\Documents\workspace\rhino_dummy\.rhino\node'
resolve 'C:\Users\XXX\Documents\workspace\rhino_dummy\.rhino\node\root\app\js\index.js' in 'C:\Users\XXX\Documents\workspace\rhino_dummy\.rhino\node'
using description file: C:\Users\XXX\Documents\workspace\rhino_dummy\.rhino\node\package.json (relative path: .)
Field 'browser' doesn't contain a valid alias configuration using description file: C:\Users\XXX\Documents\workspace\rhino_dummy\.rhino\node\package.json (relative path: ./root/app/js/index.js)
no extension
Field 'browser' doesn't contain a valid alias configuration
C:\Users\XXX\Documents\workspace\rhino_dummy\.rhino\node\root\app\js\index.js doesn't exist
.js
Field 'browser' doesn't contain a valid alias configuration
C:\Users\XXX\Documents\workspace\rhino_dummy\.rhino\node\root\app\js\index.js.js doesn't exist
.json
Field 'browser' doesn't contain a valid alias configuration
C:\Users\XXX\Documents\workspace\rhino_dummy\.rhino\node\root\app\js\index.js.json doesn't exist
.wasm
Field 'browser' doesn't contain a valid alias configuration
C:\Users\XXX\Documents\workspace\rhino_dummy\.rhino\node\root\app\js\index.js.wasm doesn't exist
as directory
C:\Users\XXX\Documents\workspace\rhino_dummy\.rhino\node\root\app\js\index.js doesn't exist
webpack 5.69.0 compiled with 1 error in 162 ms
error Command failed with exit code 1.
info Visit https://yarnpkg.com/en/docs/cli/run for documentation about this command.
Error in `system_yarn()`:
! System command 'yarn' exited with status 1.
Run `rlang::last_error()` to see where the error occurred.
For Node.js functions to work on Windows 10, you'll need to enable Developer Mode on your system as mentioned in our How-to: Use Rhino on Windows article. This is necessary for symbolic links to work on Windows (and the .rhino/node/root file is a symbolic link to the root of the project).
After you do that, delete the .rhino/node directory from your project, or run rhino:::add_node(clean = TRUE) in the root of your project.
Workaround
This answer is only a workaround, if you cannot enable developer mode on windows (see Kamil Zyla's post for more information).
It looks like the folder name "root" in the error messages is a broken variable.
The folder ...\workspace\rhino_dummy\.rhino\node\root does not exist, but the substructures do exit:
app\styles\main.scss
app\js\index.js
...\workspace\rhino_dummy\.rhino\node
Fix step1
I tried my luck and created the folder "root": C:\Users\XXX\Documents\workspace\rhino_dummy\.rhino\node\root
copied rhino_dummy\app\styles\main.scss to rhino_dummy\.rhino\node\root\app\styles\main.scss
copied rhino_dummy\app\js\index.js to rhino_dummy\.rhino\node\root\app\js\index.js
running rhino::build_sass() and rhino::build_js() now worked!
rhino::build_sass()
yarn run v1.22.15
warning ..\..\package.json: No license field
$ sass --no-source-map --style=compressed root/app/styles/main.scss:root/app/static/css/app.min.css
Done in 0.45s.
rhino::build_js()
yarn run v1.22.15
warning ..\..\package.json: No license field
$ webpack
asset app.min.js 470 bytes [compared for emit] [minimized] (name: main)
runtime modules 670 bytes 3 modules
./root/app/js/index.js 113 bytes [built] [code generated]
webpack 5.69.0 compiled successfully in 846 ms
Done in 2.58s.
Fix step2
copy results back to "static" folder, where they are expected by shiny/rhino
copy rhino_dummy\.rhino\node\root\app\static\css\app.min.css to rhino_dummy\app\static\css\app.min.css
copy \rhino_dummy\.rhino\node\root\app\static\js\app.min.js to \rhino_dummy\app\static\js\app.min.js
launch the app via shiny::shinyAppDir(".")
click the button from the tutorial ;-)
Edit1
Checking the github repo of rhino
SASS
definition of build_sass()
calling yarn("build-sass")
definition of build-sass
showing hard-coded root/app/styles/main.scss
JS
definition of build_js()
calling yarn("build-js")
definition of "webpack" build-js also showing hard-coded "root" in file paths
my all project is working fine but when i install image crop picker dependency then it shows the error even there is no build.
FAILURE: Build failed with an exception. Error given below
What went wrong:
Execution failed for task ':app:processDebugResources'.
A failure occurred while executing com.android.build.gradle.internal.tasks.Workers$ActionFacade
Android resource linking failed
F:\bgbyteappfolder\newbgb\node_modules\react-native-image-crop-picker\android\build\intermediates\library_manifest\debug\AndroidManifest.xml:10:5-14:15: AAPT: error: unexpected element found in .
BUILD FAILED in 31s
error Failed to install the app. Make sure you have the Android development environment set up: https://reactnative.dev/docs/environment-setup. Run CLI with --verbose flag for more details.
Error: Command failed: gradlew.bat app:installDebug -PreactNativeDevServerPort=8081
Note: Some input files use or override a deprecated API..
i Am expecting rapid action on this failure stackoverflow family
Upgrade your gradle version by adding classpath 'com.android.tools.build:gradle:4.0.1' in your android/build.gradle file:
buildscript {
dependencies {
classpath 'com.android.tools.build:gradle:4.0.1'
}
}
After this clean your build folder by:
cd android
./gradlew clean
Description
I am experiencing unexpected errors when running polymer build after installing and using tur-nr/polymer-redux. Here is the demo repo.
Versions & Environment
polymer-build: v0.18.3 polymer --version
node: v6.10.2
Operating System: macOS Sierra v10.12.4
Steps to reproduce
terminal
git clone https://github.com/maria-le/redux # clone remote repo to your local
cd redux # cd into your local repo
bower install # install bower dependencies
npm install redux # install redux
polymer build # attempt build
Expected results
I expect the build to complete, without errors. Then allow me to serve the packaged build.
Actual results
I get the following errors in the terminal.
Error messages
src/all-locally.html(14,16) error [unknown-polymer-behavior] - Unable to resolve behavior store. Did you import it? Is it annotated with #polymerBehavior?
ReduxStore
src/imported-behavior.html(7,16) error [unknown-polymer-behavior] - Unable to resolve behavior ReduxStore. Did you import it? Is it annotated with #polymerBehavior?
polymerStore
src/imported-store-as-variable.html(10,16) error [unknown-polymer-behavior] - Unable to resolve behavior polymerStore. Did you import it? Is it annotated with #polymerBehavior?
PolymerRedux(reduxStore)
src/imported-store.html(7,16) warning [could-not-determine-behavior-name] - Could not determine behavior name from expression of type
CallExpression
error: Promise rejection: Error: 3 error(s) occurred during build.
error: Error: 3 error(s) occurred during build.
at BuildAnalyzer._done (/usr/local/lib/node_modules/polymer-cli/node_modules/polymer-build/lib/analyzer.js:229:36)
at BuildAnalyzer. (/usr/local/lib/node_modules/polymer-cli/node_modules/polymer-build/lib/analyzer.js:189:26)
at next (native)
at fulfilled (/usr/local/lib/node_modules/polymer-cli/node_modules/polymer-build/lib/analyzer.js:17:58)
at process._tickCallback (internal/process/next_tick.js:109:7)
References
How to use polymer-redux with polymer-build?
polymer lint and polymer-build fail due to ReduxBehavior not registering properly
#polymerBehavior should still produce a behavior even if we can't evaluate the expression
I just installed the meteor framework (www.meteor.com) and I did what the QuickStart Says:
Once you’ve installed Meteor, create a project:
meteor create myapp
Run it locally:
cd my app
meteor npm install
meteor
Meteor server running on: http://localhost:3000/
However I am getting this error:
=> Started proxy.
dyld: lazy symbol binding failed: Symbol not found: _node_module_register
Referenced from: /Users/alexandremagnobezerramiranda/node_modules/kerberos/build/Release/kerberos.node
Expected in: dynamic lookup
dyld: Symbol not found: _node_module_register
Referenced from: /Users/alexandremagnobezerramiranda/node_modules/kerberos/build/Release/kerberos.node
Expected in: dynamic lookup
Trace/BPT trap: 5
So, I would like to know how do I solve this problem? Any Thoughts?
I'm trying to start a new mean stack application. However i only get this error when I'm running grunt to start the server:
[nodemon] v1.2.1
Running "watch" task
[nodemon] to restart at any time, enter `rs`
[nodemon] watching: *.*
[nodemon] starting `node --debug server.js`
Waiting...
Debugger listening on port 5858
Mean app started on port 3000 (development) cluster.worker.id: 0
/Users/olehenrik/Sites/learn/mean_test2/node_modules/mongoose/node_modules/mongodb/lib/mongodb/connection/base.js:246
throw message;
^
TypeError: Cannot read property 'length' of undefined
at processResults (/Users/olehenrik/Sites/learn/mean_test2/node_modules/mongoose/node_modules/mongodb/lib/mongodb/db.js:1581:31)
at /Users/olehenrik/Sites/learn/mean_test2/node_modules/mongoose/node_modules/mongodb/lib/mongodb/db.js:1619:20
at /Users/olehenrik/Sites/learn/mean_test2/node_modules/mongoose/node_modules/mongodb/lib/mongodb/db.js:1157:7
at /Users/olehenrik/Sites/learn/mean_test2/node_modules/mongoose/node_modules/mongodb/lib/mongodb/db.js:1890:9
at Server.Base._callHandler (/Users/olehenrik/Sites/learn/mean_test2/node_modules/mongoose/node_modules/mongodb/lib/mongodb/connection/base.js:448:41)
at /Users/olehenrik/Sites/learn/mean_test2/node_modules/mongoose/node_modules/mongodb/lib/mongodb/connection/server.js:481:18
at MongoReply.parseBody (/Users/olehenrik/Sites/learn/mean_test2/node_modules/mongoose/node_modules/mongodb/lib/mongodb/responses/mongo_reply.js:68:5)
at null.<anonymous> (/Users/olehenrik/Sites/learn/mean_test2/node_modules/mongoose/node_modules/mongodb/lib/mongodb/connection/server.js:439:20)
at emit (events.js:107:17)
at null.<anonymous> (/Users/olehenrik/Sites/learn/mean_test2/node_modules/mongoose/node_modules/mongodb/lib/mongodb/connection/connection_pool.js:201:13)
[nodemon] app crashed - waiting for file changes before starting...
Have any one encountered this before? Can't find too many other people who have encountered this before.
I was also facing the same error and this info solves it.
"Upgrade to 3.8.23. 3.8.22 introduced better compatibility with mongodb server 3.0 by upgrading to latest version of the driver." credit to vkarpov15 from mongoose Github thread.
What I did was I edit my package.json to upgrade mongoose to "3.8.23". After I edited the package.json I ran npm install and bower install(just to make sure) again and that solved the problem.