Is it possible to easily share both my drupal site and mailhog via ngrok using ddev share? (ddev share is working great to share my site currently.)
I am not networking savvy, and have tried variations on specifying port, etc but with no luck.
In case it matters, this is a windows machine running ddev on ubuntu.
I would just run a separate ngrok command that shares the mailhog port. If you look at what ddev share does, it just does ngrok http http://127.0.0.1:49156, so we'll do the same with your mailhog port.
Expose a known specific port for mailhog directly at the host level (not going through ddev-router), so set host_mailhog_port: 9999 in .ddev/config.yaml - this would need to be different for each project that's running at a given time.
Now run ngrok with ngrok http http://127.0.0.1:9999 in a different window and you'll find the shared mailhog window.
It would be easy to create a custom command that would do this for you, or even a custom command that would launch both share and ngrok-mailhog share.
Related
I have an existing JFrog/Artifactory Pro 7.27.10 RPM-based install (on a CentOS 8 VM) that I recently migrated to a new (Centos Stream 8 VM) running JFrog/Artifactory Pro 7.31.13 (also installed via RPM).
After copying my existing master.key file from the original JFrog install to the relevant directory, I started up the Artficatory Pro service on the new VM and proceeded to migrate my data using the "Simple migration with downtime" process described in this JFrog whitepaper. Everything worked fine, Artifactory is running as expected on the new VM and all my data appears good. I moved my frontend proxy DNS aliases over to the new VM and shut down the proxy on the old VM.
One problem I am now noticing is that in the Artifactory admin UI, the Monitoring > Service Status now doesn't appear to report my Artifactory/JFrog platform microservice status any more. It does show Artifactory with the correct backend IP address (running on port 8082) but then the "Status" shows "Online" with (0 of 0 nodes) and the ">" fold down arrow shows nothing when clicked. I went back to my old Artifactory instance and checked and it was still showing the single node with all of the individual JFrog platform service statuses properly.
My guess is that I missed something in the migration process and/or something else needs to be configured to allow the services to show up on the monitoring page, however I'm at a loss as to what this is or even where to look for it. I looked through the system.full-template.yaml but nothing seems obvious there. And while the Artifactory docs are usually fairly comprehensive, the page about monitoring doesn't seem to give much insight about how this is configured or what to do if it's missing. Also not sure if the initial startup of Artifactory on the new VM before I migrated by data affected how the monitoring was configured such that it now doesn't work with the imported data (unfortunately I didn't check the monitoring UI in the new VM before I did the data migration so I can't say for sure if it was initially working)
A couple of other details which may be relevant:
when migrating my VM, I kept the same (FQDN) hostname, but the IP address was different
I used the same frontend (nginx) proxy configurations on both the old/new VMs though I'm not sure if this is relevant here or not.
With the exception of going from CentOS 8 to Stream 8, the VM configurations themselves should be nearly identical as I create them from a kickstart (which was only updated for the new stream repo paths). Again not sure whether this is relevant at all here.
Any ideas on where I should be looking to figure out how to fix this?
Hey this is my first question on here, so go easy.
I set up a Nextcloud server on my homelab in an ubuntu server 20.04 vm using the snap install. I have a seperate vm running nginx as a reverse proxy to my Nextcloud instance. Everything works flawlessly as intended, except that when I try and install apps on Nextcloud, I get a curl error #7. I've tried using my lan ip through the web ui, my public domain name through the web ui, and the commandline using the nextcloud.occ app:install command. I always get the same error. I tried to find the appropriate log file to get more information but looking in /var/snap/nextcloud/current/log/ I couldn't find any relevant info in any of the logs. Running php -m comes up with php not installed, I guess because php is installed via the Nextcloud snap? Obviously php is installed somewhere because Nextcloud is running, but I don't know how to look and see what modules are enabled, or how to install new ones using the snap. Any help on what to do is much appreciated!
enter image description here
Update: I fixed it. I think I had improperly configured my firewall, and turning it off (in proxmox)/making some changes to my /etc/netplan/*.yaml file to properly configure the static IP fixed it. GL
Another reason can be a wrongliy configured network. I forgot to set the gateway/proxy for IPv4, so github.com was unreachable. Most other services I use seem to resolve IPv6 first, so I did not have any other problems besides updating nextcloud apps.
I am new at docker. I watched videos on youtube and I did the same what I saw codes.
image1
But I cant reach my local host. I cant set up wordpress with docker.
image2
Screenshot 1 show you as having 2 running containers already.
Importantly, one with port 80 exposed internally mapped to port 8080 on your host machine.
You are then trying to run a new container using the same image as the currently running container using the same port configuration which is already bound - you can't bind the same port twice in this way.
Try running docker inspect blissful_albatanni
Then try access the instance via the container ipaddress:8080
Your containers are already running and you are trying to run them again.
Couple of good resources while I'm here for getting WP working in Docker:
https://docs.docker.com/compose/wordpress/#bring-up-wordpress-in-a-web-browser
https://medium.com/#tatemz/local-wordpress-development-with-docker-3-easy-steps-a7c375366b9
https://www.upcloud.com/support/wordpress-with-docker/
I have installed R and Rstudio-server on Amazon AMI cloud and both are running properly as I can type R and get the R-terminal and check whether the RStudio-server is running.
sudo lsof | grep rstudio
Since Port 8787 is not accessible and there is another port something like 6970 open so I have created a rserver.conf file in /etc/rstudio/ But when I try to open RStudio server from my system's web browser I get this error
"No Data Received"
I am not sure what is the issue, any help would be greatly appreciated.
I've been using RStudio on AWS instance (EC2, Ubuntu) for several months, so I hope I can help you. First, could you clarify this part of your post?
Since Port 8787 is not accessible and there is another port something like 6970 open
I suppose you are using EC2, as it seems to be a common one for this purpose. Then, I believe you can open certain ports by configuring security groups in the AWS console (i.e. Network&Security - Security Group). Have you added a rule to allow 8787 (or 6970 if you prefer) inbound?
This worked for me.
rstudio-server online
I want to install wordpress on localhost
I have downloaded and installed XAMPP.
I have downloaded the wordpress 3.4.1 and placed it in htdocs folder.and i renamed it as demo_folder.
when i type in navigation bar localhost/demo_folder it shows Unable to connect page.
As you can see the apache is not running as shown in fig.
when i click on start it doesnt get started
I dont know why?
can anyone help me out???
EDIT1
the below is netstat -an cmd screenshot
This is a fairly common problem with XAMPP/Windows. The usual suspect is that there is another application running on port 80, which you should terminate. Also please use the web, there is a wealth of information on this topic.
To view all currently open ports and the PID of the process using that port, open cmd and run
> netstat -o
This should help with changing the port Apache runs on: http://www.geckoandfly.com/7491/xampp-apache-wont-start-change-port-to-listen-85/ .
If you're on Windows 7, shut down the Web Deployment Agent Service. That should clear port 80.
XAMPP does have some problems with Windows. You could also try using WAMP. It seems to be a lot easier to install and use.
As for XAMPP, try making sure nothing else is using the port 80.
It seems you have tried to install the XAMP multiple times or PORT 80 has been used by other Application. If you are sure other applications is not using the Port 80 try this:
Close the XAMP and go to run and type services.msc and find the service named Apache 2.x.x etc go to its properties and get the exact name of it . For eg, mysql service name is mysql.
After you have found the service name , Open cmd with administrator privilege and type
sc delete apache
here is the manual to delete the service name :
http://technet.microsoft.com/en-us/library/cc742045(v=ws.10).aspx
after deleting the service name try opening the XAMP and click on Start next to Apache, hope it will be running now.
If nothing works above ,most of the cases I have seen Skype is the problem:
Go to Tools>Options>Advanced>Connections
Untick Use Port 80 for incoming connections