I'm currently setting up a Windows 11 machine. After enabling the remote administration console. I'm able to open the remote IIS server (v.10) and work with any configuration.
The problem I'm having is that when I try to open the Advanced Settings for any application pool, I get a blank screen
Blank Advanced Settings screen
I have another computer with the same settings but that one has Windows 10 and I can remotely manage the same IIS without problems. (Well, except one small issue which popped up recently but I don't think they're related - Link)
Related
I have an asp website with framework.net 4. I change the server to 2019 with IIs 10. after migration my web site hangs. my application pool is classic. I check the network but I can not find the reason. I have virtual network for server.
What is the problem? How can I check the truble?
Open the EventView on server and see what are the asp.net errors there.
Usually when you setup a new server, and you have a new pool, the settings on the pool is to stay down if too many errors appears, and if for example can connect to the database, it may stay down...
So find your error on event viewer, then check the settings of you pool to see if have set to stay down after some errors.
Ok so I've set up IIS on my laptop, I then went to visual studio and created a new test project called IISTest, right clicked the solution > properties > Web > and choose > Local IIS and created the virtual directory, message popped up saying directory was created successfully, I then open IIS to make sure its there and below is what I see - seems normal:
I then run the project and got the follow message:
Unable to start debugging on the web server. Unable to connect to the web server. Verify that the web server is running and that incoming HTTP requests are not blocked by a firewall.
I off to google I went, found this which explains the problem I'm experiencing http://saiabhilash.blogspot.com.au/2012/03/unable-to-start-debugging-on-web-server.html
When I open IIS and try to see if its running on the right hand side this is what I see, I don't get the option to select start/stop or reset:
Would anyone be able to suggest what's wrong please.
You start or stop/recycle the application pool. On the left pane, Application Pools are above the Websites, the options will now appear on the right pane.
You can also run Appcmd.exe, for Application Pool operations
or
Run iisreset from the command-line, for IIS Server Wide operations
I am developing on my local machine (Windows 7), and using IIS 7. I usually create a new website by right clicking on sites -> Add New Site. Then do the usual stuff by pointing to the physical files, and I'd stop all other websites which I didnt need. I could then run the site on port 80 without any binding conflicts.
I then recently started doing some ASP.NET development. When I published from my VS 2010 to local host I could run the website, and it all worked great. I then stopped the site (asp.net) but I couldnt start any of the other sites (not even the default). I am not sure why.
I started to read about App Pools and someone said to remove all the application pools. So I removed all my application pools (except the default app pool), and I also removed all the websites (as they had a red x next to them).
I now cannot start the default site as the restart, start and stop are greyed out. I cannot find out any way to reset the IIS server. One error I have received is;
the object identifier does not represent a valid object iis7
I dont know really know what this means, and when I search for this error it seems that many people have come across this error but in different contexts.
Is there any way to reset IIS so I can build simple websites again? Do I need to uninstall IIS and reInstall?
Uninstall IIS and reinstall would probably be the easiest and fastest way to accomplish this.
Other than that check the event logs see if you can find any clues there.
You'll want to ensure there is a one-to-one relationship between the number of sites & the app pools that host them. If they are 32-bit apps hosted on a 64-bit server, you'll need to enable this property (set it to True) on the app pool you want to use for your site. You'll want to run:
C:\inetpub\AdminScripts>cscript adsutil SET W3SVC/AppPools/Enable32bitapponWin64 1
The .NET Framework obviously needs to be installed, but then the separate step of running the ASP installation command needs to be done (C:\Windows\Microsoft.NET\Framework\v2.0.xxxx\aspnet_regiis.exe -i). If it already is, re-install them - it could be malfunctioning/corrupt.
After all that, I noticed IIS 7 puts on this generic app pool identity account to run the app pool with. I created a service account, gave this account Admin rights just to see if the site would run, and added it onto the app pool as the "Custom account". I no longer get the HTTP 503 error. The account should have the "Log on as a service" and "Log on as a batch job" rights. If it will be using impersonation and going out to a SQL database, the "Impersonate client after authentication" and "Allow log on locally" rights are also needed (hence why I like just giving it admin privileges to see if it works, first).
I have an ASP.NET project which developed in visual studio 2010 on my computer.
I can open its pages using address like : localhost:52413/Default.aspx .
I want to reach that page from my smartphone which is connected in same wireless network. How can i do that. First of all i tried 192.168.2.2:52413/default.aspx
What should i do?
If you are using the Visual Studio built-in development server, then you are not going to be able to open the website on another computer (or smartphone). This web server is bound to localhost. But you have three options to test your website on your smartphone:
Use IIS Express
Install IIS Express
Change project settings to use IIS Express instead of the built-in web server
Configure IIS Express to listen to remote requests.
Use IIS
Install IIS
Change project settings to use IIS (instructions for Visual Studio 2008, mostly the same in Visual Studio 2010)
Transfer your files to a web host where you have a domain name and hosting contract
For 1. and 2. you probably also need to configure your local machine's firewall to allow incoming traffic.
This can be done quite easily using Fiddler.
www.fiddler2.com
First download and install Fiddler.
Start the program and select "Tools" -> "Fiddler Options" from the menu.
In the options dialog select the "Connections" tab and check "Allow remote computers to connect".
A 'restart required' dialog may appear.
Now select "Rules" -> "Customize Rules" from the menu.
This opens a text file called "CustomRules". At the end of the "OnBeforeRequest" method (around line 188 or so) add the following:
if (oSession.host.toLowerCase() == "192.168.2.2:8888")
oSession.host = "localhost:2000";
Save the file. Close it. Restart Fiddler.
Start your web application (I usually configure the web site with a static port) like normal and verify that it's viewable on the computer through localhost:2000 (or whatever port number you have decided to use. It must match what you entered in "CustomRules", though).
Now you should be able to browse the web application from any device on your lan provided firewall and such let you by pointing a browser to http://192.168.2.2:8888
Maybe the firewall on your computer is blocking connections to port 52413. Try turning off the Windows Firewall to see if that helps.
local development server can be use only from local machine, publish to your app to or you can install UtilDev Web server (former Cassini)
Recently I installed Oracle and the required Microsoft Loopback Adaptor, which worked fine. However, this seems to have screwed up IIS (or at least its interaction with Visual Studio) somehow. I can't connect to localhost or 127.0.0.1 anymore, and I can't even open a web project in Visual Studio 2008 (which used to work fine), getting the error "The local IIS URL http://localhost/MyProject specified for the Web project MyProject has not been configured. In order to open this project the virtual directory needs to be configured. Would you like to create this directory now?" I click yes, then it gives an error that it "could not find the server http://localhost on the current machine".
IIS is running and I can connect to the default IIS website and other contents of inetput/wwwroot on localhost:1122.
I tried to disable the loopback adaptor and comment out the line I needed to add to hosts to get Oracle working, and while this has stopped Oracle from working, it hasn't helped with IIS/localhost.
edit: this turned out to be fixed by restoring the project from a backup, so it must have been an issue with the project itself of some sort.
I am guessing it's a problem with the loopback adaptor. You might have to restore your Connection settings properly. Check whether the loopback adaptor is properly disabled and whether Connection settings are correct from Control Panel->Network Connections.
Edit:
Also it would be better to restart the system after you have made all the necessary changes in the settings.
You could configure your local IIS to listen on a different port. Right click Default website, tab Web site, then Advanced. Add for example 1234 as a TCP port.
Then you can connect like http://localhost:1234/YourProject
You can open the website in Visual Studio from the file system, and specify the new URL in Project -> Property Pages -> Start Options -> Use custom server.
Ok, I finally managed to get this working by deleting the project and restoring from a backup. I guess the project configuration had somehow become screwed up in such a way as to cause the error I got, rather than there being a problem with IIS itself. Sorry for the false alarm.
Something similar happened to me today on Windows XP and IIS 5.whatever-it-is. The problem is that a tool I installed had created some Virtual Directories without an Application Name under the Default Web Site.
The solution was to open up the IIS snap-in, right-click and choose Properties for the offending virtual directories, and make up an "Application name" under the "Virtual Directory" tab of the Properties dialog that pops up. It didn't matter what I named it, as long as there was no virtual directory under the Default Web Site with a blank application name.