I'm working on a wordpress site hosted on an AWS Lightsail instance (Bitnami)　wordpress cannot connect to the server.
The error code is ERR_CONNECTION_REFUSED
I ran this command
sudo apt update
sudo apt upgrade
sudo reboot
sudo /opt/bitnami/ctlscript.sh restart apache
result
Failed to restart apache: Failed to restart apache
Any solution or idea?
Thank you.
Related
I have installed Openstack using Packstack on centos stream 8 but when i want to use Centos Stream 9 for Openstack ( using packstack ), it through an Error that
OpenStack networking currently does not work on systems that have the
Network Manager service enabled.
But as you may know, network-scripts/ifcfg ... are not Available on Centos 9 anymore!
in case of Centos Stream 8, I have manually disabled and Stoped Network Manager and instead i have been using systemctl enable network to enable the Network availability after reboot or during the installation!
But this is not available for Centos stream 9!
Anyone can give me some insights on how to fix this issue!
Any replacement for Network Manager like what we do on centos stream 8 ( using network ) but for centos Stream 9?
dnf install -y centos-release-openstack-yoga &&
dnf install -y openstack-packstack
packstack --gen-answer-file /root/openstack-answer.txt
Thanks
best regards
This worked for me:
Install centos-release-openstack-yoga and openstack-packstack:
dnf install -y centos-release-openstack-yoga
dnf install -y openstack-packstack
Install network-scripts:
dnf update -y
dnf install -y network-scripts
Disable NetworkManager and enable network service:
systemctl disable NetworkManager
systemctl stop NetworkManager
systemctl enable network
systemctl start network
Install openstack:
packstack --allinone
Check ALL of your network interfaces are configured correctly. For me they weren't, because packstack simply ignored my second NIC and it didn't magically migrate from NetworkManager configuration:
ls -la /etc/sysconfig/network-scripts/ifcfg-*
nginx. Using Ubuntu on windows 10 home.
I see the below error when trying sudo nginx -t
sudo nginx -t
nginx fails to start
sudo service nginx start
Thanks in advance
You are trying to start nginx on a privileged port. You cannot open a privileged port (<=1024) as non-root user. Hence the permission denied error. Try with :8080 or any other non-privileged ports maybe?
I have installed latest version of nginx.It is is installed succefully.
But getting error while typing the below command.
sudo ufw allow 'Nginx Full'
Error:ERROR: Could not find a profile matching 'Nginx Full'
sudo ufw app list
showing only
Available applications:
OpenSSH
How to add the application.
Nginx Full
Nginx HTTP
Nginx HTTPS
OpenSSH
I have installed two times nginx server
Error:ERROR: Could not find a profile matching 'Nginx Full'
Ubuntu (18.04)
You can see which apps are available by running this command:
ufw app list
Ports:
HTTP - 80
HTTPS - 443
Simple way to add them to UFW:
ufw allow 80,443/tcp
If you are wanting to accomplish this via application you will need to create the application ini file within /etc/ufw/applications.d
Example:
vi /etc/ufw/applications.d/nginx.ini
Place this inside file
[Nginx HTTP]
title=Web Server
description=Enable NGINX HTTP traffic
ports=80/tcp
[Nginx HTTPS] \
title=Web Server (HTTPS) \
description=Enable NGINX HTTPS traffic
ports=443/tcp
[Nginx Full]
title=Web Server (HTTP,HTTPS)
description=Enable NGINX HTTP and HTTPS traffic
ports=80,443/tcp
Then type this commands
ufw app update nginx
ufw app info 'Nginx HTTP'
ufw allow 'Nginx HTTP'
I had the same problem.. turned out Nginx was not installed due to some reason.
So it showed only OpenSSH by doing
sudo ufw app list
I got to this when I tried to uninstall Nginx using the command
sudo apt-get remove nginx
The output showed something like this:
Package 'nginx' is not installed, so not removed
Now you have to try installing Nginx again using commands
sudo apt update
sudo apt install nginx
sudo ufw app list
now the options will be available
// Check to see
Available applications:
Nginx Full
Nginx HTTP
Nginx HTTPS
OpenSSH
Now allow HTTP port using the command:
sudo ufw allow 'Nginx HTTP'
And finally run this command:
sudo ufw enable
Now hit the URL in browser it will show Nginx default page.
ERROR: Could not find a profile matching 'OpenSSH', Then install first ssh by given command
sudo apt-get install ssh
After installing package add the OpenSSH allow
sudo ufw allow OpenSSH
sudo ufw status
Tested
Happened to me after installing using the official site's instructions for Ubuntu
Simply install as this (after removing if already installed)
sudo apt-get remove nginx
sudo apt install nginx
Currently I'm trying to follow this guide:
https://marxtudor.com/how-to-install-wordpress-using-ssh-on-centos-vps/
I'm using Google Cloud Platform (free edition to test) and I've created a fresh CentOS 7 VM. The guide above are the first commands I fill in and I keep getting this error:
I've followed so many tutorials, created a new VM and all the time I bump into this error that it doesn't know the httpd command.. I even deleted the project and started all over, but still no luck.
[rsa-key-XXXXXX]$ sudo service httpd restart
Redirecting to /bin/systemctl restart httpd.service
Failed to restart httpd.service: Unit not found.
[rsa-key-XXXXXX]$ httpd -t
-bash: httpd: command not found
[rsa-key-XXXXXX]$
Could anyone please let me know what could be causing this ?
Thanks in advance!
I was also getting the same error, this is how i resolved my issue.
After logging to the machine:
Step 1: Become the root user.
command: sudo su
Step 2: Update Kernal
command: yum update -y
Step 3: Install Apache command: yum install
httpd -y
Step 4: Start Apache command: service httpd start
Step 5: Check Status of Service command: service httpd status
This should solve your problem. good luck
Do you want to install WordPress for your Compute Engine VM instance, using CentOS 7?
If this is the case, you may do so by setting up LAMP for your VM, as described here [1], and then download the WordPress release of your choice [2] and install it on your VM.
I understand that you have successfully set up a VM instance using Centos 7, is this correct? Assuming this, and as you may see from [1], for CentOS 7, these would be the commands to perform this installation:
1) Update and install Apache and PHP:
sudo yum check-update
sudo yum -y install httpd php
2) Start the Apache service:
sudo service httpd start
sudo chkconfig httpd on
3) Install, configure and start DB:
sudo yum -y install httpd mariadb-server php php-mysql
sudo systemctl start mariadb
4) Configure MySQL (set a password for the root user if you want):
sudo mysql_secure_installation
5) Restart Apache
sudo service httpd restart
Once MySQL is set up, you will have to create a database for your WordPress installation.
Following this procedure, you will have Apache, MySQL and PHP installed and running on your Compute Engine VM instance.
Then, you can download the WordPress release of your choice [2], unzip the file and install WordPress by visiting your IP address and the folder where WordPress was downloaded. For example, http://YOUR_PUBLIC_VM_IP_ADDRESS/wordpress.
You will be asked for a database name, the user and password. This will allow WordPress to create the wp-config.php file on your behalf and proceed with the installation.
At this point, you should have WordPress already installed on your Compute Engine VM instance using CentOS 7.
An easier way to install WordPress on Compute Engine VM instances, would be by using the Marketpĺace in the Cloud Platform Console. Go to your Products and Services menu > Marketplace, and search for "Wordpress". You will be presented with many different options to launch WordPress in a Compute Engine VM instance. Nevertheless, it seems that Debian is the deafult OS used for these options.
Links:
[1] https://cloud.google.com/community/tutorials/setting-up-lamp
[2] https://wordpress.org/download/
In my case, I resolved it by looking what actual package name had "httpd" in it.
yum search httpd
It returned httpd.x86_64
Also, later on, when doing sudo service httpd start, I received the notification that PolicyKit1 was needed. So, all up, that command installed the package:
yum install -y httpd.x86_64 polkit-qt.x86_64
service httpd start
I use command Ubuntu: sudo apt-get install phpmyadmin
In process installing I inform about selection type of server: apache2 and lighttpd.
My server is build only on Nginx + php_fpm.
How i can install phpmyadmin without selection apache2 or lighttpd?
Sorry for stupid question
First install php5-fpm and then install phpmyadmin.
sudo apt-get install php5-fpm
sudo apt-get install phpmyadmin
The software, phpMyAdmin, requires a Web server and PHP. If PHP and a Web server have not yet been installed, then the default action is to use Apache. The package, php5-fpm, satisfies the requirements; thus, installing phpmyadmin after php5-fpm results in only the following additional package dependencies.
dbconfig-common javascript-common libjs-codemirror libjs-jquery
libjs-jquery-cookie libjs-jquery-event-drag libjs-jquery-metadata
libjs-jquery-mousewheel libjs-jquery-tablesorter libjs-jquery-ui
libjs-underscore libmcrypt4 php-gettext php5 php5-gd php5-mcrypt php5-mysql
Although PHP-FPM is not a Web server, the package maintainer understood that if php5-fpm has been installed, then the Ubuntu server will utilize some other Web server that uses the FastCGI Process Manager (FPM), and there is no need to know which Web server.
considering you have a lemp stack
you could also skip the queston with tab to "ok".
this might force phpmyadmin to install apache2, at least on the newest built, it wasnt like that before.
than when an error arrives that apache2 could not start, this is due nginx php-fpm already using the port, just toggle apache to start with this shell command
sudo update-rc.d -f apache2 remove