i scan the some ip with masscan and the output is empty and did not show any port open althogh i do the same scan with nmap and find open ports, can anyone help me to fix this problem with masscan?
and it show me this error:
FAIL: failed to detect router for interface: "ens33"
[hint] try something like "--router-mac 66-55-44-33-22-11"
Related
I have a problem with my pl2303 converter. I'm using two of them like this:
LAPTOP <-USB-SERIAL-> <-SERIAL-SERIAL-> <-SERIAL-USB-> RASPBERRYPI
In other words, I'm connecting Raspberry Pi with my laptop using two usb-to-serial converters and having null modem in the middle.
I can communicate through minicom and "visually" it looks fine (all information is sent properly), but when I look into the logs it produces following dmesg output:
[ 343.390610] pl2303 ttyUSB1: pl2303_get_line_request - failed: -32
[ 343.685367] pl2303 ttyUSB1: error sending break = -32
I could live with that as long as everything works fine... but it doesn't. For example, I can't connect with RPi via ser2net. The "other side" simply doesn't get the messages. I suspect that this error is the cause of this problem. I was googling around, but I didn't find any solution. Could somebody help me with it?
Also - when I try to connect via ser2net, one thing breaks. Before that I can to stuff like
cat -v < /dev/ttyUSB0
and
echo "blablabla" > /dev/ttyUSB0
with success. After I try to connect via ser2net, it stops working and only minicom communication is fine.
I have a process using https. I found its PID using ps and used the command lsof -Pan -p PID -i to get the port number it is running on.
I need iftop to see the data transfer. The filter I am using now is
iftop -f "port http 57787".
I don't think this is giving me the right output.
Can someone help me the right filter to use with iftop so that I know the traffic going through only this port?
I can see 2 problems here:
1/ Is that a typo? The correct option for filtering is -f (small "f"). -F (capital "F") option is for net/mask.
2/ Though not explicitly stated by iftop documentation, the syntax for filtering seems to be the pcap one from the few examples given (and using ldd I can see that yes, the iftop binary is linked with libpcap). So a filter with http is simply not valid. To see the doc for pcap filtering syntax, have a look at pcap-filter (7) - packet filter syntax man page. In your example, a filter such as "tcp port 57787" would be OK. pcap does not do layer 5 and above protocol dissection such as http (pcap filters are handled by BPF in the kernel, so above layer 4 you're on your own, because that's none of the kernel business).
All in all, these looks like iperf bugs. It should refuse your "-F" option, and even with "-f" instead exit with an error code because pcap will refuse the filter expression. No big deal, iftop is a modest program. See edit bellow.
EDIT:
I just checked iftop version 1.0pre4 source code, and there is no such obvious bug from a look at set_filter_code() and its caller packet_init() in iftop.c. It correctly exit with error, but...
Error 2, use the "-f" option, but your incorrect filter syntax:
jbm#sumo:~$ sudo iftop -f "port http 57787"
interface: eth0
IP address is: 192.168.1.67
MAC address is: 8c:89:a5:57:10:3c
set_filter_code: syntax error
That's OK.
Error 1, the "-F" instead of "-f", there is a problem:
jbm#sumo:~$ sudo iftop -F "port http 57787"
(everything seems more or less OK, but then quit the program)
Could not parse net/mask: port http 57787
interface: eth0
IP address is: 192.168.1.67
MAC address is: 8c:89:a5:57:10:3c
Oops! "Could not parse net/mask: port http 57787"! That's a bug: it should exit right away.
I have the following error in a data retrieve on a Dcm4che Server:
2015-04-27 14:55:16,463 ERROR -> (TCPServer-1-2) [org.dcm4cheri.server.ServerImpl] org.dcm4che.net.PDUException: Unrecognized PDU[type=71, length=14113
95360]
org.dcm4che.net.PDUException: Unrecognized PDU[type=71, length=1411395360]
at org.dcm4cheri.net.FsmImpl$2.parse(FsmImpl.java:1051)
at org.dcm4cheri.net.FsmImpl.read(FsmImpl.java:512)
at org.dcm4cheri.net.AssociationImpl.accept(AssociationImpl.java:287)
at org.dcm4cheri.server.DcmHandlerImpl.handle(DcmHandlerImpl.java:248)
at org.dcm4cheri.server.ServerImpl.run(ServerImpl.java:288)
at org.dcm4cheri.util.LF_ThreadPool.join(LF_ThreadPool.java:174)
at org.dcm4cheri.util.LF_ThreadPool$1.run(LF_ThreadPool.java:221)
at java.lang.Thread.run(Thread.java:662)
Can somebody help me please?
Likely a mismatch in aet name or settings.
Imagine your dcmrcv server as a house. It has a mailbox address that is just listening for stuff.
Now when you use say dcmsnd from somewhere else you must make sure it sends its information to the correct address. If you get ip and port right you may see a blurb come out on dcmrcv but it won't accept it.
Simplify your test as much as possible. Here is a very simple dcmrcv:
dcmrcv TRANSFERTEST#10.1.50.75:104 -dest "C:\Temp"
call this from another cmd prompt:
dcmsnd CONI_STORAGE#dev.capsurecloud.com:11012 "C:\modalities\xa" -L WST
Note: That WST is not needed, but is the aet name of my application. Read the confluence documentation for more arguments.
Most the time i see your error is becuase the aetname#ip is mismatch or one side is sending or listening for tls and the other side doesn't match.
I've got a Tcl/Expect program that reads and writes data to the serial port.
I did all of my development and testing on a Fedora 7 machine, but I'm now trying to run the same code in Ubuntu 8.10, and I'm getting the following error:
spawn: returns {0}
bad option "-mode": should be one of -blocking, -buffering, -buffersize, -encoding, -eofchar, or -translation
while executing
"fconfigure $port -mode 19200,n,8,1"
(file "./scan1.tcl" line 31)
I have no issues in Fedora, just Ubuntu. It would seem that it doesn't like the serial options being given to fconfigure, but I don't know of an alternate way of doing this.
Both machines have Tcl 8.4.
Here's the relevant code snippet:
#Open serial port
set portname "/dev/ttyS0"
spawn -open [set port [open $portname "r+"]];#This is a beast!
fconfigure $port -mode 19200,n,8,1
Does anyone know what's wrong? Thanks for your help!
Some research seems to indicate that the [fconfigure] command doesn't offer the -mode switch when it doesn't recognize the channel in question as being a true serial port (though I don't see this mentioned in the docs). Ultimately, that decision seems to rely on an "isatty()" system call, which is apparently failing to report the channel as a TTY. More info can be found here:
http://groups.google.com/group/comp.lang.tcl/browse_thread/thread/ea0e772c59fa1e52/949c04fe4cebc2a3?q=fconfigure+mode+group:comp.lang.tcl#949c04fe4cebc2a3
According to the above thread, this could be due to a misconfigured Tcl.
Update... I see the serial configuration options (including -mode) are documented with the [open] command. There, it mentions that [fconfigure] can be used to query or set the additional options specific to serial ports. The [fconfigure] docs should probably be updated to reflect that fact also.
Bottom line, Tcl doesn't think your port really is a serial port under Ubuntu, though I don't know why...
Could be a bug. It has been in the past.
http://sourceforge.net/tracker/?func=detail&atid=110894&aid=218617&group_id=10894
When trying to run the Flex Builder 3 profiler on any I don't get the profiler dialog window and then after a few seconds I get "Socket timeout" in the console window. Any ideas why it can't connect?
I've got the latest debug version of Flash player and have tried shutting off my firewall.
I'm running it on XP from the local drive, ie. not through localhost.
Thanks,
Alex
It looks like the browser (Firefox in my case) has to be shutdown before the profiler is started. Step 1. in the livedocs even says this -- wish I had read it earlier. :)
http://livedocs.adobe.com/flex/3/html/help.html?content=profiler_3.html
Make sure that your firewall does not block port 9999, you can customize the port number too: Open Preferences->Flex->Profiler->Connections.
Check /etc/hosts (C:\Windows\System32\drivers\etc\hosts), and see if it contains a line:
127.0.0.1 localhost
In my case, it was somehow changed to ::1 localhost, and that's why it stopped working.
Thanks to Ziv for the (poorly formatted) answer.
While I try to run my Flex Profiler I got this error message:
In the flash application I got the following exception:
Error #2044: Unhandled securityError:. text=Error #2048: Security sandbox violation:
file:///C|%2Fwork%2Flabsense%2Fbranches%2Frel%5F1%5F2%5F5%5FEA%2Fsources%2Fui%2F.metadata%2F.plugins%2Fcom.adobe.flash.profiler%2FProfilerAgent.swf?host=localhost&port=9999
cannot load data from localhost:9999.
at ProfilerAgent()[C:\SVN\branches\3.2.0\modules\profiler3\as\ProfilerAgent.as:127]
And in the flex Profiler console (at the eclipse) I got : Socket timeout.
I am run on windows vista,
Flex builder: 3.2
Flash debugger: 10,0,22,87
Things that I have done to resolve this issue:
Switch the connection port of the profiler to 9998 (and back)
Remove and reinstall the flash debugger player.
Install flex builder 3.2 (instead of 3.0)
Delete all the enters in the mm.cfg file
Add enter to the mm.cfg:
PreloadSwf=C:\work\labsense\Sources\ui\.metadata\.plugins\com.adobe.flash.profiler\ProfilerAgent.swf?host=localhost&port=9999
or
PreloadSwf=C:\work\labsense\Sources\ui\.metadata\.plugins\com.adobe.flash.profiler\ProfilerAgent.swf?host=localhost&port=9998
or
PreloadSwf=C:/work/labsense/Sources/ui/.metadata/.plugins/com.adobe.flash.profiler/ProfilerAgent.swf?host=localhost&port=9999
or with spaces:
PreloadSwf=C: \ work \ labsense \ Sources \ ui \ .metadata \ .plugins \ com.adobe.flash.profiler \ ProfilerAgent.swf?host=localhost&port=9999
or
C:\work\labsense\Sources\ui\.metadata\.plugins\com.adobe.flash.profiler\ProfilerAgent.swf?
or add all or some of the enters:
TraceOutputFileName=C:\Users\zivo\AppData\Roaming\Macromedia\Flash Player\Logs\flashlog.txt
ErrorReportingEnable=1
MaxWarnings=0
TraceOutputFileEnable=1
ProfilingFileOutputEnable=1
Turn on and off the vista firewall
Add exception for port 9999 in the vista firewall
Try to run the profiler SWF separately
Same result.
Try one last thing:
Because I have expreins problem little bit similar before with the flash debugger, the resolution then was:
Right click on flash player (debugger),
choose “Debugger”,
choose “other machine”
add “127.0.0.1”
click ok
then, it solve the issue (but apparently he connect to the debugger with host 127.0.0.1 instead of localhost (which is a same)
I now add to the mm.cfg file, the follow entry:
PreloadSwf=C:/work/labsense/branches/rel_1_2_5_EA/sources/ui/.metadata/.plugins/com.adobe.flash.profiler/ProfilerAgent.swf?host=127.0.0.1&port=9999
Then, after saving, I run the profiler, and its work!!
And the reasons for all this was:
Some program change the file C:\Windows\System32\drivers\etc\hosts to:
# Copyright (c) 1993-2006 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
::1 localhost
127.0.0.1 iDBO # LMS GENERATED LINE
This means that localhost is not lead to 127.0.0.1!!!
Fixing is easy:
# ::1 localhost
# 127.0.0.1 iDBO # LMS GENERATED LINE
127.0.0.1 localhost
Instead (remark the problem and fix the problem
After trying all the other suggestions here, this post on Adobe's forum clued me in.
Adobe forum
When the Flash debug player launches, it looks for mm.cfg in %HOMEDRIVE%%HOMEPATH%. On this particular computer that path is not my home directory on C: but on the file server mapped to I:. So once I created I:\mm.cfg with the contents
PreloadSwf=C:\Users\ehedstrom\Documents\FLEXBU~1\.metadata\.plugins\com.adobe.flash.profiler\ProfilerAgent.swf?host=localhost&port=9999
everything magically started working!
Browser tabs, make sure you have latest debug as you said you did, also make sure that the port is correct, for some reason the port sometimes changes(1001 or 20957) from the default 9999, be sure that your mm.cfg has ProfilingFileOutputEnable=1 and that bittorrent isn't on.
hth