On my professional laptop, with Cisco Anyconnect, LAN access is not allowed. So all routes are overwritten, even when entered manually.
I can get admin rights temporary to install some things, but I'm not supposed to change Cisco profile, etc. With Vbox, NAT access works perfectly! And installing the Vbox new adapter is not forbidden.
I don't know how to do the same from a physical PC, is there some way using again NAT access?
Related
I'm having a fritzbox with vpn and fritznas set up. From inside the local network as expected there is no problem, I can access the user interface as well as mounting the samba share.
But now I'm trying this from another network (but connected to the firtzbox via the built in vpn service) and I've got a situation which is very weird.
From my laptop I can connect via vpn and bring the user interface up, but I cannot login in the user interface (with the normal user interface password) neither can I mount my samba share.
But I'm sure that the vpn connection is set up properly since ssh to machines connected to the remote fritzbox works.
And now I've tried this too from my smartphone (connecting via vpn, log into the user interface and access the samba share) and there everything is quite fine.
Any suggestions what might cause these problems on the laptop (I'd say that something in the fritzbox is set up falsely but since it works on the smartphone, it has to be something on my laptop I think)? (I have tried everything I can think of but nothing works)
With best regards and thanks in advance
PS: My OS is Arch Linux
EDIT: It gets even stranger: If I change my setup from
Laptop -> WLAN -> VPN to
Laptop -> Hotspot of my Smartphone -> VPN it works again (but slow of course since now it is over the mobilenet of the smartphone)
I'm having trouble creating a network link between my Hyper-V host machine and its VM (both are running Windows 10).
I created an virtual external switch for both the host and VM so that both can access the internet and download programs and Windows updates, but I could not get them to communicate with each other directly. My research told me to create a virtual internal switch in Hyper-V and then have the devices be able to access each other that way (presumably by doing something like typing \\host_machine_IP\c$ into an explorer window once the network connection had been made). But once I created the virtual internal switch and assigned static IP address to both the host and VM on it, I still could not ping the host from the VM, or vice versa.
Am I missing a step? Let me know what more details you guys need.
By default you would have Windows Firewall blocking your communications until you confirm network profile to be other than Public. Try selecting a home\work network location profile via Control Panel > Network and Sharing canter. Or disable the firewall on the machine you try connecting to. Otherwise you should have no communication problem with the setup described, provided the subnet is the same for both machines.
I've Created My Own FileZilla FTP server and I wanted to access it from my local Network.
So I've done that. but there are Two Problems I'm Facing right now.
Problem 1:- Can't connect ON PC which is connected with same Router But with LAN
My father's PC is connected with LAN And My Laptop is Connected with WiFi
So over WiFi with Any Device I can connect to my Server but when I try to connect my FTP to my father's PC (which is connected on LAN and with same Router)
I can't connect it
Problem 2:- Can't connect it Remotely
I want to access my this FTP server with Internet so that I can connect it with Remotely. I've referred on so many websites. but Can't Find a complete step by step Tutorial... I've Configured my FTP but still Can't connect it with Internet for remote access.. plzz help me out.
Thanks In Advance...
Problem 1: As you say wifi-connected devices can access the server, so there are different cases you shall check, as where my experience reaches, these two might be the reasons:
Is client/network isolation enabled in your router's wifi settings? This can be checked and solved by accessing your router's management console.
Is your father's PC on a different subnet (XXX.XXX.SUBNET.XXX)? If so, you have two choices, changing all devices' subnet masks to 255.255.0.0 (This might be applicable in your router's DHCP settings too.), or changing your father's PC's IP address to match the local subnet.
Problem 2: This has two solutions, both need resources that might not be worth it, but yet:
Connect to a virtual private network on the cloud (VPN), this way, your PC will become a part of a private network. You can connect other devices from other networks which can access the VPN server to the private network, so your PC and the device will now be in a same network like in your home network.
Some ISPs provide static IP addresses or internet plans with static IPs. Check if the internet plan you use is so, if not, you might be able to rent an IP address from them. With static IPs your network can be accessed from the internet. Anyway there might be a bit of effort needed to ensure that your PC is accessed in the first place.
And just letting you know, this question must be moved to the Super-User Forums.
I have a dedicated virtual debian server running with my website, and now have a copy of that so that I can try some configurations by running it virtually on my own PC. It runs fine, but I'm unable to access the machine through http.
The problem is that my machine has a fixed ip, something like 194.247.x.x . My home network however has computers in the range of 192.168.1.x
Is it possible to not change anything in my virtual machine and still configure vmware networking so that I'm able to access the websites it's running?
The only way I can see this happening for you is to use NAT (Network Address Translation) between your home network and your VM.
To do this, you could use a free software based router - something like Vyatta (www.vyatta.org) - and create a VM with two NICs - one with an IP on your home network, and the other with an IP on the same network as your VM. You then configure NAT to translate your home IP to your web server IP and then you're done.
There's nothing 'de-facto' VMware that will allow you to do this (other than using vShield - which will do NAT'ing anyway)...
I am using Virtual PC 2007 with Windows xp Pro as the Guest.
Is it possible to add the Virtual PC to the network of the guest PC and to the domain of the Guest PC?
I enabled NAT shared networking but that only allows internet access on the guest..
Thanks
This shouldn't be a problem when you add the guest to host's physical adapter:
In the settings for your VM, go to Networking and instead of "Shared networking (NAT)", select the NIC that's connected to the network on your host (e.g. "Realtek RTL8116 Gigabit Ethernet", or whatever your NIC is; this is equivalent to VMWare's Bridged Mode). That way, the guest will appear as a real computer on your network, and will work like a physical box on the network.
IIRC, MS VPC bypasses the default Windows firewall on the host, so only the guest's firewall applies; for other FW products, you may need to enable something like "permit packets not destined for this host".
Just to add to the above answer-
1.
Inside the Local Area Connection
Properties- VM Network Services Driver
wasnt installed without which the NIC
option wont appear in the Virtual
machine Network Adapter Configuration.
I reinstalled the Virtual PC and that
entry Virtual Machine Network
Driver appeared.
2.
Another helpful resource-
http://blogs.msdn.com/virtual_pc_guy/archive/2007/01/15/fixing-broken-virtual-networking.aspx
Shouldn't be a problem as long as you can connect to a domain controller from the virtual computer.
If you know the IP address of a domain controller, try to ping it. Then try to ping it using the computer name, to see if name resolution is working correctly. What happens when you join a domain using Control Panel | System. Do you receive an error message?
I have not used Virtual PC, only VMWare workstation on Linux, so I do not know how the networking setup is on Virtual PC. On VMWare, you can choose between bridged and NAT networking for a virtual machine. I have been able to set up Windows guest computers as members of a windows domain using both kinds of network setup.