imported database, copied drupal site files to wamp/www folder, changed database configuration files, but got "Drupal already installed" error.
Tried by increasing packet size on mysql configuration file.While trying with an empty database , through the setup steps, site being installed. Is there any solution to use the existing database
Drupal version:8.9.20
Php: 7.4.26
apache: 2.4.51
mysql:5.7.36
This message can happen for several different reasons, so here is a start to help you trouble shoot:
MySQL max_allowed_packet, innodb_buffer_pool_size, innodb_lock_wait_timeout
Adding this to verify that this is the packet setting you updated in my.ini
Try updating the innodb_buffer_pool_size & innodb_lock_wait_timeout settings as well
Be sure to restart MySQL after the update is made
drupal.org source
Verify Permissions settings.local.php & MySQL DB user
Make sure the file permissions on your /sites/default/ folder is correct, and settings.local.php file (or whichever settings file you are using)
Make sure the DB user you have configured in the settings file has the correct permissions to the DB as well
Check log files
Check all log files in your WAMP log folder to see if there is any additional information
Related
I was working on a website for a client a week ago and I came back to make further edits, but whenever I want to access the website, it reads:
Error establishing a database connection
I checked my wp-config file and everything is untouched; I did not touch one single line of code here when setting up my new Wordpress project in Local by Flywheel.
All my other local websites work except for this one. I've provided an image of my workspace just to make it more clear.
Looking at this image, the MySQL Version is a little bit off. The version should in fact be 5.6.37, but instead it's reading an older version of MySQL.
I did try closing and reopening Local by Flywheel, but it had no effect.
Any help appreciated. Thank you!
Right click on the site name and click on “Reveal in Finder” in Local by Flywheel.
Compress the folder containing all your site in a *.ZIP file (normally there must be at least the “app” and “logs” folder, sometimes “conf”).
In Local by Flywheel, import the site manually in FILE / IMPORT SITE, choose the Zip of your site
Normally, it reinstalls the site and recreates the Database … for me it’s work (on Windows and on Mac)
Are you able to compare your wp-config.php file in the broken site to a site that is using the same MySQL server?
I know you said that the file is untouched, but check again that all of the define parameters are correct.
Next I would suggest logging into your MySQL server using the credentials you have listed in the wp-config.php file and ensure you are able to access your database.
I've recently moved my WP site from godaddy to a physical sever using windows server 2012 R2.
But I'm having problem uploading files using the Admin panel, After uploading the file, I can see it physically on the server (wp-content\upload\2017\10)
But I can't see it on the website it self.
I can only see the file if I'm changing it permissions on the server it self.
I've changed the permissions to the folder, I gave full access to the relevant users. But still, it doesn't work for new files\pictures I'm uploading via the wp admin panel
Edit:
I've notice that every time I come to change the folder permissions the permissions under CREATOR OWNER are always empty, Is it Related ?
Thank you very much for the help
When you upload a file, PHP sends the file to a temporary directory on your server's hard drive (usually C:\Windows\Temp) and then copies it over to the proper directory. Once the file has is initially put in the temporary directory, it gets the permissions of that directory. The problem is when Windows moves that file to the proper place, it keeps the temporary directory’s permissions, which can cause access problems.
The way to fix this is to change the temporary directory to a folder within your WordPress installation, usually wp-content/upgrade.
To do this, follow these directions:
Find your php.ini file.
Find the upload_tmp_dir line, and change it to the wp-content/upgrade folder.
Browse to this folder and verify that the permissions are set properly.
You should then have the ability to properly view all your images. You'll most likely need to select all the previous selected images, and change the owner of the files to the web folder owner. Then you should be good to go!
If you can’t upload an image at all, it’s probably because you need to give the IUSR account Read/Write/Modify permission on your wp-content folder. This will allow you to upload, and do the WordPress & plugin updates.
Once you have done that, all you need to do is give the IIS_IUSRS group Read permissions on your “C:\Windows\Temp” folder.
Make sure to notice that the two permission changes you make are not for the same user/group. Give IUSR permissions on your wp-content folder and IIS_IUSRS permissions on your Windows temp folder.
Note: If you have edited your php.ini file and change the upload temp directory then you will need to give IIS_IUSRS group read permissions on that folder instead.
That should do it, or at least it worked for me.
http://chris.wastedhalo.com/2011/01/wordpress-upload-permissions-on-iis-7-fix/
I find myself coming back to this question time after time when images I add to the Media Gallery don't have the correct permissions in the WordPress Uploads folder. Since I develop WordPress sites locally, it would be a pain to set permission on the Uploads folder every time I work on a new site.
To fix this, I created a folder "C:\Websites\Temp" without messing around with permissions or security settings, etc. Then in MAMP, I edited the php.ini template of the PHP version I was using for this site, php7.3.0.ini (File, Edit Tempate, PHP). I then set upload_tmp_dir to "C:\Websites\Temp":
; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
upload_tmp_dir = c:\websites\temp
and voila, no more permission issues.
Well, a few years later, found this post. Tried it. Failed.
Other solution is to assign a specific user to the site in IIS and apply the right permisions to the folder containing the site.
I have wordpress on my windows server. Pictures and files are uploading but when i trying to access these files the server showing up with
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
When I searched for error i found some solutions about IIS but it didn't work. Can anyone cross with this permission error? And what is the solution.
Thanks
When you upload a file, PHP sends the file to a temporary directory on your server's hard drive (usually C:\Windows\Temp) and then copies it over to the proper directory. Once the file has is initially put in the temporary directory, it gets the permissions of that directory. The problem is when Windows moves that file to the proper place, it keeps the temporary directory’s permissions, which can cause access problems.
The way to fix this is to change the temporary directory to a folder within your WordPress installation, usually wp-content/upgrade.
To do this, follow these directions:
Find your php.ini file.
Find the upload_tmp_dir line, and change it to the wp-content/upgrade folder.
Browse to this folder and verify that the permissions are set properly.
You should then have the ability to properly view all your images. You'll most likely need to select all the previous selected images, and change the owner of the files to the web folder owner. Then you should be good to go!
I've just migrated a client site to her production server using the latest version of BackupBuddy v3.0.40, and at first glance everything looks dandy, but on closer inspection, most WP file functions are borked: update wp, upload images, upload plugin.
I've done this a ton of times (several times on this host), and don't know why its not working here
I suspect it has to do with the tmp directory, but i can't see a problem..
another possibility is that a script (installatron via cpanel maybe interfering.. i notice that there are upload folders created for all months up to 2016! i read about this being a solution to permissions issues in WP's past)
This is what I've tried:
changing the wp-media upload location to the default, changing the 'store in year/month' setting and general wiggling. this was imported as '/home/###/public_html/wp-content/uploads' which looks correct, but unnecessary, the default is wp-content/uploads. neither work.
changing the permissions on wp-content and uploads dir to 777 (not all contents)
adding a line to wp-config.php:
define('WP_TEMP_DIR', ABSPATH . 'wp-content/'); no dice
uninstalled all traces of the installatron scripted wp installation (no files or db remain)
repeating the migration (same backup file, identical results)
confirming that:
i can create new posts, just not upload media
it works on the staging server (same host)
safe mode is off
apache is running as user, tx suPHP
the files were extracted by php via the browser
i've compared phpinfo to other working sites and dont notice anything out of the ordinary
hope you can shed some light!
thanks, Tim
image upload error:
“envelope-9887.jpg” has failed to upload due to an error
The uploaded file could not be moved to /home/###/public_html/wp-content/uploads/2012/07.
wordpress update error:
Download failed.: Destination directory for file streaming does not exist or is not writable.
plugin install error:
Download failed. Destination directory for file streaming does not exist or is not writable
sometimes when migrating you may have to look through the database options table and change a few entires, ie:
from the old site structure it could be: /home/yoursiteid/public_html/wp-content/ etc..
but on the new server the structure could have changed?
ie: /home/differentuserid/wwwroot/wp-content/
edit a file on the server to include :
echo getcwd() . "\n";
just to see if the home directory is the same as your current server or if its changed from your old sevrer, have a check in your database options table and update the entires which ref the old dir structure..
I found, eventually, that I'd overlook the line
define('WP_TEMP_DIR', 'old-hard-link-here');
which I believe was nestled directly under the wp salts, camoflaged to the tired eye! Simply removing that line and setting the media path to the default fixed the issue.
I believe that that line was installed by the cPanel script 'Installatron'.
Case closed
We're currently rebranding a client of ours and it's come the time to take the new brand to their website.
I've not much experience with Drupal other than the theming (I've themed a Drupal website in the past but not very familiar with the software's inner workings).
As this website is live, it's obviously not feasible for me to make any changes to the live environment, so I have downloaded the source files of the website to a local webserver (MAMP).
I also have a MySQL dump of the database.
I'm not sure what files need to be changed inside Drupal to allow access to the MAMP webserver. Could somebody point me in the right direction here?
How would I connect the database to the website, which files need modification?
I think the client is running Drupal 6.
Update:
I've installed the database and linked it up using the below line:
$db_url = 'mysql://root#localhost/databasename';
I've hidden databasename for anonymity.
As it's MAMP, the database has no password. When I load up the website I get an error that install.php is not found. It's not there because the website is already 'installed'.
I've also updated the $base_url to read:
$base_url = 'http://localhost:8888/foldername';
You only need to modify one file, 'sites/default/settings.php'; you'll just need to change the database connection string in there to match your new database settings. There may be a couple of other settings in there you need to tweak depending on the set up of the site (for example the $base_url or $cookie_domain).
Other than that everything in your installation should be relatively path-ed so there shouldn't be any need to make more changes.
i was facing same problem after couple of hours try i got solution : we have to check the DB (tick on list of databases in local host) [ observe this after DB list : Enabling the database statistics here might cause heavy traffic between the web server and the MySQL server. so enable only the db you want to use] this will redirect to http://localhost:8888/foldername/install.php successfully :D :D