I have the following minimal tmux config:
unbind C-b
set-option -g prefix C-a
bind C-a send-prefix
set -g history-limit 5000
setw -g mouse on
setw -g monitor-activity on
bind -n C-Left split-window -h
But pressing Ctrl+Left does not do anything. I also tried bind -n C-Left split-window -h but Ctrl+b Ctrl+Left did also nothing.
Isn't is possible to remap Ctrl?
Related
I have following configuration in my tmux config file:
unbind C-b
set -g prefix C-s
bind-key - split-window -v
bind-key \ split-window -h
When I am in tmux, if I try
Ctrl+s : split-window -v
it works. If I try
Ctrl+s -
it does not work. It says No Buffer, and tmux does not do anything.
Any help on how can I debug this behaviour?
The - key is already bound to the delete-buffer command. You can check this by executing tmux list-keys. You must unbind it and then apply your binding:
unbind -
bind-key - split-window -v
Here is my .tmux.conf
set-option -g prefix C-\
bind-key C-p select-pane -U
bind-key C-n select-pane -D
bind-key C-b select-pane -L
bind-key C-f select-pane -R
What I want is to bind C-\ C-b to switch to the left pane, C-\ C-f to switch to the right pane and etc.
But I got the message .tmux.conf:2: usage: set-option [-agosquw] [-t target-session|target-window] option [value] when I started tmux.
Any idea how to do it?
It has to do with your choice of prefix being C-\. The '\' character is used to indicate that the next line is a continuation of the set-option command. Add a gap after C-\ or quote C-\ as explained here: https://superuser.com/questions/417236/tmux-with-non-alphanumeric-prefix
You can use the following:
set-option -g prefix 'C-\'
bind-key C-p select-pane -U
bind-key C-n select-pane -D
bind-key C-b select-pane -L
bind-key C-f select-pane -R
I have been using tmux in iTerm2 for a while now but I have not been using the tmux integration that now comes with iTerm2.
I started looking at using the tmux intergration as it allows you to use the shell intergration inside tmux.
The problem i am encountering is that after i do tmux -CC none of the key bindings inside my .tmux.conf work... I cant even get any of the defaults to work. I would really like to use tmux integration but cant unless i can get the key bindings in my .tmux.conf to work.
Some of the bindings that are not working are;
Rebound the prefix key to C-s
bind-key \ split-window -v -c '#{pane_current_path}'
bind-key - split-window -h -c '#{pane_current_path}'
These are just a couple of examples but basically nothing seems to be working...
My .tmux.conf is
# improve colors
set-option -g default-terminal "screen-256color"
# set base Prefix key to ctrl-s
unbind C-b
set -g prefix C-s
bind-key -r C-s send-prefix
# reload the source config
bind-key r source-file ~/.tmux.conf \; display-message "~/.tmux.conf reloaded"
# Smart pane switching with awareness of Vim splits.
# See: https://github.com/christoomey/vim-tmux-navigator
is_vim="ps -o state= -o comm= -t '#{pane_tty}' \
| grep -iqE '^[^TXZ ]+ +(\\S+\\/)?g?(view|n?vim?x?)(diff)?$'"
bind-key -n C-h if-shell "$is_vim" "send-keys C-h" "select-pane -L"
bind-key -n C-j if-shell "$is_vim" "send-keys C-j" "select-pane -D"
bind-key -n C-k if-shell "$is_vim" "send-keys C-k" "select-pane -U"
bind-key -n C-l if-shell "$is_vim" "send-keys C-l" "select-pane -R"
bind-key -n C-\ if-shell "$is_vim" "send-keys C-\\" "select-pane -l"
set-option -g status-keys "emacs"
#change colour of status bar
set-option -g status-bg '#666666'
set-option -g status-fg '#aaaaaa'
# set window split
bind-key - split-window -v -c '#{pane_current_path}'
bind-key \ split-window -h -c '#{pane_current_path}'
# set text in status bar
set -g status-interval 1
set -g status-justify centre # center align window list
set -g status-left-length 50
set -g status-right-length 140
set -g status-left '#[fg=green]#H #[fg=black]• #[fg=green,bright]#(uname -r | cut -c 1-6)#[default]'
set -g status-right '#[fg=green,bg=default,bright]#(tmux-mem-cpu-load -i 1) #[fg=red,dim,bg=default]#(battery -at) #[fg=white,bg=default]%a%l:%M:%S %p#[default] #[fg=blue]%Y-%m-%d'
# Fine adjustment (1 or 2 cursor cells per bump)
bind -n S-Left resize-pane -L 2
bind -n S-Right resize-pane -R 2
bind -n S-Down resize-pane -D 1
bind -n S-Up resize-pane -U 1
# new window opens in same directory
bind c new-window -c "#{pane_current_path}"
# set window numbering to start from 1
set -g base-index 1
set -g renumber-windows on
# allow to take a pane and put it into new window
bind-key b break-pane -d
# allows ctrl-j to open tree of tmux sessions
bind-key C-j choose-tree
# Use vim keybindings in copy mode
setw -g mode-keys vi
# Setup 'v' to begin selection as in Vim
bind-key -t vi-copy v begin-selection
bind-key -t vi-copy y copy-pipe "reattach-to-user-namespace pbcopy"
# Update default binding of `Enter` to also use copy-pipe
unbind -t vi-copy Enter
bind-key -t vi-copy Enter copy-pipe "reattach-to-user-namespace pbcopy"
# History
set -g history-limit 10000
# Mouse mode
set-option -g mouse on
# Rename Tab
set-option -g set-titles on
# Terminal notifier doesnt work with tmux
set -g default-command "which reattach-to-user-namespace > /dev/null && reattach-to-user-namespace -l $SHELL || $SHELL -l"
set-option -sg escape-time 10
Copying my answer at https://stackoverflow.com/a/47171067/4200039 over:
Someone reported a similar bug at iTerm2 Tmux Integration Default Keybindings not working in 2015. The response from the developer George Nachman suggests that keybindings are not supported:
One of the main goals of the tmux integration is that you use iTerm2's
keystrokes, not tmux's. If there's a specific workflow that you can't
accomplish natively, let me know--there is a lot of power in the
ability to remap keys in iTerm2.
This should be flagged as a duplicate of iTerm 2 not honoring key bindings declared in .tmux.conf but I can't flag it until it has an accepted or upvoted answer.
When I type ctrl+b(keep them pressing) button and then hit c button nothing happens. No ctrl+b command combinations work. Only these two commands work:
tmux new-session -s {session-name}
tmux kill-session -t {session-name}
Also I am not able to create new nested session. How to create new session. Are there modes for using tmux like vim. For eg. hit esc for normal/command mode, hit i for insert mode and v for visual mode. I am asking this question because I doubt if I need to press some key before giving key commands like ctrl+b+n. They just get written as normal text in terminal.
Characters are inputted in terminal. See the screenshot below. I am using all my tmux, zsh, vim configurations from here
Please check my tmux.config file
set -g default-command "reattach-to-user-namespace -l zsh"
# tmux display things in 256 colors
set -g default-terminal "screen-256color"
set -g status-utf8 on
# automatically renumber tmux windows
set -g renumber-windows on
# unbind default prefix and set it to Ctrl+a
unbind C-b
set -g prefix C-a
bind C-a send-prefix
# for nested tmux sessions
bind-key a send-prefix
# Activity Monitoring
setw -g monitor-activity off
set -g visual-activity off
# Rather than constraining window size to the maximum size of any client
# connected to the *session*, constrain window size to the maximum size of any
# client connected to *that window*. Much more reasonable.
setw -g aggressive-resize on
# make delay shorter
set -sg escape-time 0
# make window/pane index start with 1
set -g base-index 1
setw -g pane-base-index 1
######################
#### Key Bindings ####
######################
# reload config file
bind r source-file ~/.tmux.conf \; display "Config Reloaded!"
# split window and fix path for tmux 1.9
bind | split-window -h -c "#{pane_current_path}"
bind - split-window -v -c "#{pane_current_path}"
# synchronize all panes in a window
bind y setw synchronize-panes
# pane movement shortcuts
bind h select-pane -L
bind j select-pane -D
bind k select-pane -U
bind l select-pane -R
bind -r C-h select-window -t :-
bind -r C-l select-window -t :+
# Resize pane shortcuts
bind -r H resize-pane -L 10
bind -r J resize-pane -D 10
bind -r K resize-pane -U 10
bind -r L resize-pane -R 10
# enable mouse support for switching panes/windows
# NOTE: This breaks selecting/copying text on OSX
# To select text as expected, hold Option to disable it (iTerm2)
setw -g mode-mouse on
set -g mouse-select-pane on
set -g mouse-resize-pane on
set -g mouse-select-window on
# set vi mode for copy mode
setw -g mode-keys vi
# more settings to make copy-mode more vim-like
unbind [
bind Escape copy-mode
unbind p
bind p paste-buffer
bind -t vi-copy 'v' begin-selection
bind -t vi-copy 'y' copy-selection
# Buffers to/from Mac clipboard, yay tmux book from pragprog
bind C-c run "tmux save-buffer - | reattach-to-user-namespace pbcopy"
bind C-v run "tmux set-buffer $(reattach-to-user-namespace pbpaste); tmux paste-buffer"
You have changed the default escape-sequence in your configuration: from Ctrl-B (tmux default) to Ctrl-A (just like the similar terminal multiplexer screen).
The relevant configuration lines are in the third paragraph:
# unbind default prefix and set it to Ctrl+a
unbind C-b
set -g prefix C-a
bind C-a send-prefix
If you want to use tmux default one just comment out (with a leading #) or remove the lines above in your tmux.conf.
I have also recently came across the same problem in Linux Mint, but this thread fixed it
For the vertical splitting: Instead of (Ctrl+B) + % => (Ctrl+B) + (Ctrl+%).
For the horizontal splitting: Instead of (Ctrl+B) + " => (Ctrl+B) + (Ctrl+")
Also, do not forget to release (Ctrl+B) before pressing the (Ctrl+%) or (Ctrl+").
I started using tmux recently and things are good except for the fact that tmux prints out my last run command before output, e.g.:
~ $ pwd
pwd/Users/me
You can see that it put "pwd" before the directory there, which is annoying.
My shell(zsh) doesn't do this when I run commands outside of tmux.
show-environment -g doesn't reveal any weird options being passed to zsh or anything: SHELL=/bin/zsh
I read through the manpage and Googled around but I can't find anything.
Thanks for any help!
Figured it out -- needed to change my ~/.tmux.conf to have a different TERM(xterm instead of screen-256color):
# act like vim
setw -g mode-keys vi
bind h select-pane -L
bind j select-pane -D
bind k select-pane -U
bind l select-pane -R
bind-key -r C-h select-window -t :-
bind-key -r C-l select-window -t :+
# act like GNU screen
unbind C-b
set -g prefix C-a
# look good
#set -g default-terminal "screen-256color"
set -g default-terminal "xterm"
set -g status "off"