Related
This AutoIt script counts number of words; characters (with and without spaces); lines; and estimated speaking time (assuming two words per second) for text selected by the user.
However, if the starting position is 0 for the input string (at the upper left-hand corner of the top of the file) the method returns 0 for everything, even when the main function works perfectly.
I cannot figure out why.
$input_str = GUICtrlRead($Textbox)
$selpos = _GUICtrlEdit_GetSel($Textbox)
MsgBox($MB_OK, $selpos[0], $selpos[1])
$selstring = StringMid($input_str, $selpos[0], ($selpos[1] - $selpos[0]))
$WordArray = StringRegExp($selstring, "[\s\.:;,]*([a-zA-Z0-9-_]+)[\s\.:;,]*", 3)
$SingleQuotes = StringRegExp($selstring, "'", 3)
$Result = ""
$Seconds = (UBound($WordArray) - UBound($SingleQuotes)) / 2
If $Seconds >= 3600 Then
If $Seconds / 3600 >= 2 Then
$Result = $Result & Int($Seconds / 3600) & " hours "
Else
$Result = $Result & Int($Seconds / 3600) & " hour "
EndIf
EndIf
If Mod($Seconds, 3600) >= 60 Then
If $Seconds / 60 >= 2 Then
$Result = $Result & Int(Mod($Seconds, 3600) / 60) & " minutes "
Else
$Result = $Result & Int(Mod($Seconds, 3600) / 60) & " minute "
EndIf
EndIf
If Mod($Seconds, 60) > 0 Then
If Mod($Seconds, 60) >= 2 Then
$Result = $Result & Int(Mod($Seconds, 60)) & " seconds "
Else
$Result = $Result & Int(Mod($Seconds, 60)) & " second "
EndIf
EndIf
MsgBox($MB_OK, "Selection Properties", _
"Number of characters (with spaces): " & StringLen($selstring) & #CRLF & _
"Number of Characters (without spaces): " & StringLen(StringStripWS($selstring, 8)) & #CRLF & _
"Number of words: " & (UBound($WordArray) - UBound($SingleQuotes)) & #CRLF & _
"Number of lines: " & _GUICtrlEdit_GetLineCount($selstring) & #CRLF & _
"Estimated speaking time: " & $Result _
)
If $selpos[0] = 0 then StringMid() returns an empty string since your start is out of bounds (as first position for StringMid() is 1).
$sTest = "A sample test string"
MsgBox(0, '' , StringMid($sTest , 0 , 8))
MsgBox(0, '' , StringMid($sTest , 1 , 8))
So I am in need of replacing string text with autoit using stringreplace but I need to randomize the output.
An example of what I need is
Stringreplace($string, "and", {also|as well})
My ultimate goal is to randomly replace the text with the following options based on the word "and" with also or as well
I wrote this a long time ago.
It will convert this
My name is {John|Peter|Mark}! {Regards|Cheers|Get lost}!
to something like this
My name is John! Cheers!
It works with line breaks also.
Func SpintaxToTXT($TextWithSpintax)
Dim $MSGMSG
Dim $lines
$lines = StringSplit($TextWithSpintax, #LF)
For $z = 1 To $lines[0]
If $z > 1 Then $MSGMSG &= #LF
$d = StringSplit($lines[$z], "{}")
For $i = 1 To $d[0]
$MSGSplit = StringSplit($d[$i], "|")
If #error Then
$MSGMSG &= $MSGSplit[1]
ContinueLoop
EndIf
$MSGMSG &= $MSGSplit[Random(1, $MSGSplit[0], 1)]
Next
Next
Return $MSGMSG
EndFunc ;==>SpintaxToTXT
Try this:
Global $options_A = StringSplit('also,as well,bla,blubb,that,this', ',', 2)
For $i = 0 To 20
ConsoleWrite($options_A[Random(0, UBound($options_A) - 1, 1)] & #CRLF)
Next
Here's one I made earlier. Works exactly the same as StringReplace except instead of taking a replacement string, it takes a function that returns the replacement string. The using Xenobiologist's array method, you get the desired result.
Local $sTest = "The cat and the dog and the rat."
ConsoleWrite(_StringReplaceCallback($sTest, "and", _MyCallback) & #LF)
Func _MyCallback($s)
Local Static $aOptions = StringSplit("also|as well", "|")
Return $aOptions[Random(1, $aOptions[0], 1)]
EndFunc ;==>_MyCallback
Func _StringReplaceCallback($sString, $sFind, $funcReplace, $iOccurence = 0, $iCaseSense = 0)
Local $sRet = ""
Local $iDir = 1
Local $iPos = 1
If $iOccurence < 0 Then
$iDir = -1
$iPos = StringLen($sString)
EndIf
If $iOccurence = 0 Then $iOccurence = $iDir * StringLen($sString)
While 1
$i = StringInStr($sString, $sFind, $iCaseSense, $iDir, $iPos)
If $iDir > 0 Then
If Not $i Or Not $iOccurence Then
$sRet &= StringMid($sString, $iPos)
ExitLoop
EndIf
$sRet &= StringMid($sString, $iPos, $i - $iPos) & $funcReplace($sFind)
$iPos = $i + StringLen($sFind)
Else
If Not $i Or Not $iOccurence Then
$sRet = StringMid($sString, 1, $iPos) & $sRet
ExitLoop
EndIf
$sRet = $funcReplace($sFind) & StringMid($sString, $i + StringLen($sFind), $iPos - $i - StringLen($sFind) + 1) & $sRet
$iPos = $i - 1
EndIf
If $iOccurence <> 0 Then $iOccurence -= $iDir
WEnd
Return $sRet
EndFunc ;==>_StringReplaceCallback
It's probably worth noting that there is actually a simpler solution for this, provided the replacement strings don't ever include "and" (or else you'll have an infinite loop), that just replaces one instance at a time:
Local $sString = "The cat and the dog and the rat."
Local $aOptions = StringSplit("also|as well", "|")
Do
$sString = StringReplace($sString, "and", $aOptions[Random(1, $aOptions[0], 1)], 1)
Until Not #extended
ConsoleWrite($sString & #LF)
I start a server with:
$BungeeServer = Run("java -Xmx512M -jar " & '"' & $file0 & "\BungeeCord.jar" & '"', $file0, $Hide, $STDERR_MERGED)
Then I get the data from the server with(It's in a while loop):
Assign("sOutput", StdoutRead($BungeeServer, False, False) & #CRLF)
GUICtrlSetData($Edit1, $sOutput)
The problem is that It only returns the latest string of information. I need it to add instead of replace the values. Anybody know an easy way to do that?
Edit: When a server starts, you normally get a cmd window. I want to be able to have it in a Gui instead. Also I only want it to appear when I click a button, still it should start getting data when the server starts. The lines of text also went outside the box. I tried:
Do
$msg1 = GUIGetMsg()
$line1 = StdoutRead($BungeeServer, True)
$totalOutput1 &= $line1 & #CRLF
GUICtrlSetData($Edit1, $totalOutput1)
$line2 = StdoutRead($1, True)
$totalOutput2 &= $line2 & #CRLF
GUICtrlSetData($Edit2, $totalOutput2)
$line3 = StdoutRead($2, True)
$totalOutput3 &= $line3 & #CRLF
Until $msg = $GUI_EVENT_CLOSE
The edit boxes were made with:
$Form2 = GUICreate("Servers", #DesktopWidth - 15, #DesktopHeight - _GetTaskBarHeight() - 35, -1, -1)
$Edit1 = GUICtrlCreateEdit("", 0, 0, 634, 334, BitOR($ES_AUTOVSCROLL, $ES_AUTOHSCROLL, $ES_READONLY, $ES_WANTRETURN, $WS_VSCROLL))
Font()
$Edit2 = GUICtrlCreateEdit("", 635, 0, 634, 334, BitOR($ES_AUTOVSCROLL, $ES_AUTOHSCROLL, $ES_READONLY, $ES_WANTRETURN, $WS_VSCROLL))
Font()
$Edit3 = GUICtrlCreateEdit("", 634 + 634, 0, 634, 334, BitOR($ES_AUTOVSCROLL, $ES_AUTOHSCROLL, $ES_READONLY, $ES_WANTRETURN, $WS_VSCROLL))
Font()
GUISetState(#SW_SHOW)
Edit: I found a better way to do it where I made a child window and didn't need all the other stuff:
$GUI = GUICreate("Consoles", 1020, 600, 1282, 300, BitOR($WS_MINIMIZEBOX, $WS_SYSMENU, $WS_CAPTION, $WS_CLIPCHILDREN, $WS_POPUP, $WS_POPUPWINDOW, $WS_GROUP, $WS_BORDER, $WS_CLIPSIBLINGS))
If GUICtrlRead($Bungee) = 1 Then
$BungeeServer = Run("java -Xmx512M -jar " & '"' & $file0 & "\BungeeCord.jar" & '"', $file0, $Hide)
If Not ProcessWait($BungeeServer) = 0 Then
WinSetTitle("C:\Windows\system32\java.exe", "", "Bungee")
WinSetTitle("C:\WINDOWS\SYSTEM32\java.exe", "", "Bungee")
Global $hwnd0 = WinGetHandle("Bungee")
EndIf
EndIf
_WinAPI_SetWindowLong($hwnd0, $GWL_EXSTYLE, $WS_EX_MDICHILD)
_WinAPI_SetParent($hwnd0, $GUI)
WinMove($hwnd0, "", 0, 0, 340, 300)
Still need to find a way to use ControlSend to the child windows :/
Use StdoutRead($BungeeServer, True)
StdoutRead ( process_id [, peek = false [, binary = false]] )
peek [optional] If true the function does not remove the read characters from the stream.
OR
Consider storing the previous data before getting the new one. Instead of assigning the new data to the variable, you can just add it.
eg.
$totalOutput &= $newOutput & #LF
About StdoutRead: In order to get all data, it must be called in a loop.
From the help file:
; Demonstrates StdoutRead()
#include <Constants.au3>
Local $foo = Run(#ComSpec & " /c dir foo.bar", #SystemDir, #SW_HIDE, $STDERR_CHILD + $STDOUT_CHILD)
Local $line
While 1
$line = StdoutRead($foo)
If #error Then ExitLoop
MsgBox(0, "STDOUT read:", $line)
WEnd
While 1
$line = StderrRead($foo)
If #error Then ExitLoop
MsgBox(0, "STDERR read:", $line)
WEnd
MsgBox(0, "Debug", "Exiting...")
Considering all above, StdoutRead should be used like this:
Local $sOutput
While 1
$line = StdoutRead($foo, True)
If #error Then ExitLoop
$sOutput = $line
WEnd
OR
Local $sOutput
While 1
$line = StdoutRead($foo)
If #error Then ExitLoop
$sOutput &= $line & #LF
WEnd
I'm in the process of making a small program to tell me on the fly how many employees are currently punched in via AvayaCMS Reporting.
Right now, the way that it is setup is that I have an Avaya script to take a quick report and export it in a CSV that is used by my Autoit script.
In terms of debugging it, I feel like I missing something and need another set of eyes.
launching the Staffing.au3 triggers the CSV script I'm using against the report. Even having the exact same data my message box still reports "0"
#include <Array.au3>
#include <CSV.au3>
$i_AgentCount = AvayaData(#ScriptDir & '\Report.csv', #ScriptDir & '\Name List.csv')
MsgBox(0x40, "", $i_AgentCount)
Func AvayaData($s_ReportSource, $s_NameList)
$av_LiveData = _ParseCSV($s_ReportSource)
If #error Then Return -1
$av_NameList = _ParseCSV($s_NameList)
If #error Then Return -1
Local $i_AgentCount = 0
For $i_RowCnt = 1 To (UBound($av_LiveData, 1) - 1) Step +1
For $i_AgtLst = 1 To (UBound($av_NameList) - 1) Step +1
If StringStripWS($av_LiveData[$i_RowCnt][1], 3) = StringStripWS($av_NameList[$i_AgtLst][0], 3) Then
$i_AgentCount += 1
EndIf
Next
Next
;Return the Agent Count
Return $i_AgentCount
EndFunc
Name List.csv
Agent Name
"Doe, Jane"
"Doe, John"
Report.csv
,Agent Name,Login ID,Extn,AUX Reason,State,Split/Skill,Time,VDN Name
5,"Doe, John",5930001,1000001,7,AUXOUT,999,51:32:00,
2,"Doe, Jane",5930002,1000002,7,AUXOUT,999,52:32:00,
Tested! It works well with the files supplied (copied them and names them as in your script)
please note the followings
_ParseCsv() has been rewritten add parameters like $Dchar as delimeter etc. (see script)
Note how I locate the names in the file (you can easily add feature to extend search but it won't be becessary)
msgboxes are for explanatory purposes; comment them out if not need them anymore
array.au3 is not needed
and the code:
$i_AgentCount = AvayaData(#ScriptDir & '\Report.csv', #ScriptDir & '\Name List.csv')
MsgBox(0x40, "", $i_AgentCount)
Func AvayaData($s_ReportSource, $s_NameList)
$av_LiveData = _ParseCSV($s_ReportSource,",","oops...",True)
If #error Then Return -1
$av_NameList = _ParseCSV($s_NameList,",","oops: 2",True)
If #error Then Return -1
MsgBox(0,default,"$av_NameList (Number of lines) -> " & $av_NameList[0][0])
MsgBox(0,default,"$av_NameList (Number of data in each line) -> " & $av_NameList[0][1])
MsgBox(0,default,"$av_LiveData (Number of lines) -> " & $av_LiveData[0][0])
MsgBox(0,default,"$av_LiveData (Number of data in each line) -> " & $av_LiveData[0][1])
Local $i_AgentCount = 0
for $i = 1 to $av_NameList[0][0] Step 1
For $j= 1 To $av_LiveData[0][0] Step 1
;we can have names from $av_NameList as well from $av_LiveData but in Live Data 2nd abd 3rd values are the names
MsgBox(0,default,$av_NameList[$i][1] & $av_NameList[$i][2] & " <------------> " & $av_LiveData[$j][2] & $av_LiveData[$j][3])
;~ let's compare them if matched with any of the liveData lines
If StringCompare($av_NameList[$i][1] & $av_NameList[$i][2],$av_LiveData[$j][2] & $av_LiveData[$j][3]) == 0 Then
$i_AgentCount += 1
MsgBox(0,default,"Match found: counter: " & $i_AgentCount)
EndIf
Next
Next
;Return the Agent Count
Return $i_AgentCount
EndFunc
Func _ParseCSV($f,$Dchar,$error,$skip)
Local $array[500][500]
Local $line = ""
$i = 0
$file = FileOpen($f,0)
If $file = -1 Then
MsgBox(0, "Error", $error)
Return False
EndIf
;skip 1st line (since it is the header)
If $skip Then $line = FileReadLine($file)
While 1
$i = $i + 1
Local $line = FileReadLine($file)
If #error = -1 Then ExitLoop
;skip 1st line
$row_array = StringSplit($line,$Dchar)
If $i == 1 Then $row_size = UBound($row_array)
If $row_size <> UBound($row_array) Then MsgBox(0, "Error", "Row: " & $i & " has different size ")
$row_size = UBound($row_array)
$array = _arrayAdd_2d($array,$i,$row_array,$row_size)
WEnd
FileClose($file)
$array[0][0] = $i-1 ;stores number of lines
$array[0][1] = $row_size -1 ; stores number of data in a row (data corresponding to index 0 is the number of data in a row actually that's way the -1)
Return $array
EndFunc
Func _arrayAdd_2d($array,$inwhich,$row_array,$row_size)
For $i=1 To $row_size -1 Step 1
$array[$inwhich][$i] = $row_array[$i]
Next
Return $array
EndFunc
#region ;************ Includes ************
#include "csv.au3"
#include <Array.au3>
#endregion ;************ Includes ************
$i_AgentCount = AvayaData(#ScriptDir & '\Report.csv', #ScriptDir & '\Name List.csv')
MsgBox(0x40, "", $i_AgentCount)
Func AvayaData($s_ReportSource, $s_NameList)
Local $i_AgentCount = 0
Local $s = FileRead($s_NameList)
Local $loggedInNames = FileRead($s_ReportSource)
$av_NameList = _ParseCSV($s_NameList)
If #error Then Return -1
;~ _ArrayDisplay($av_NameList)
ConsoleWrite($s & #CRLF)
For $i = 1 To UBound($av_NameList) - 1
ConsoleWrite($i & " " & $av_NameList[$i][0] & #CRLF)
If StringInStr($s, $av_NameList[$i][0]) <> 0 Then
$i_AgentCount += 1
EndIf
Next
Return $i_AgentCount
EndFunc ;==>AvayaData
I have a text file contains 2 columns, I need to search "A" using autoit
Column1 Column2
------- --------
1 2
3 A
5 6
$file = FileRead("columns.txt")
$lines = StringSplit($file, #CR)
$count = $lines[0]
For $i = 1 To $count
$line = $lines[$i]
$noExtraBlanks = StringStripWS($line, 7)
$columns = StringSplit($noExtraBlanks, " ")
$columnCount = $columns[0]
For $j = 1 To $columnCount
If $columns[$j] == "A" Then
ConsoleWrite("Line: " & $i & ", Column: " & $j & #CR)
EndIf
Next
Next
If you need more help, you need to be more precise what you exactly want to achieve... This here will give you the position of the "A" in the given file.