My data is in polar coordinates and when i plot them and try to add the polar grid it will be complete circles but my data is only from 0-60 degrees.
How can i limit the grid only from 0-60 degrees only, and not a complete circle?
I am not aware of a built-in feature for this. However, as a workaround, one might use the multiplot in order to draw the grid lines manually.
For example:
set term pngcairo enhanced size 800,800
set output 'fig.png'
set angles degrees
set multiplot
set lmargin at screen 0.1
set tmargin at screen 0.9
set rmargin at screen 0.9
set bmargin at screen 0.1
set samples 1000
unset border
R_max = 1
dR = 0.2
phi_max = 60.
dphi = 15
set xr [0:R_max]
set yr [0:R_max]
set xtics out nomirror
unset ytics
set style line 42 lc rgb '#666666' dt 3
unset key
plot \
for [i=0:phi_max/dphi] (x>=0&&x<=R_max*cos(i*dphi))?tan(i*dphi)*x:1/0 w l ls 42
set polar
set trange [0:phi_max]
unset raxis
unset rtics
plot \
for [i=1:ceil(R_max/dR)] i*dR<=R_max?i*dR:1/0 w l ls 42
unset raxis
unset rtics
plot cos(t) w l lw 2 lc rgb 'dark-red'
produces:
Having a data file I want to add labels to my bar plot, but unfortunately the labels overlay above the first bar and I could not figure out how to add an offset to each label:
set xrange[0:30]
set y2tics font "Arial,8" mirror
#set y2tics rotate # rotating the y2ticks alongside with the y-axis
set xtics font "Arial,6"
#set datafile separator "\t"
set boxwidth 0.5 absolute # balkengroesse
set bmargin 0.6
set tmargin 0
set lmargin 0.9
set rmargin 0
set title "RTF History Analysis" font"Arial,9"
set ylabel "Max RTF" font"Arial,9" noenhanced
#set xlabel "Timestamp" font"Arial,9" noenhanced
#set xtics rotate 90 # turn the text to the vertical position
set style data boxes # boxplot
set style fill solid 0.5 noborder
set multiplot layout 3,1 # 3x vertical 1x horizontal
set grid xtics y2tics
set logscale y
set grid my2tics
set yrange[0.001:6500]
set logscale y2
set my2tics 10
unset ytics
set format "10^{%L}"
set xtics rotate by 50 offset -4.5,-3.00
set format y
plot "history_file.txt" u 7:xticlabels(2) w boxes lc rgb"blue" notitle, \
"history_file.txt" u 7:2:3 w labels rotate left font "Arial,6" lc rgb"blue" notitle
Part of data file:
recipe.rcp 14-03-2017-12:10 top 0.00656997498323 0.0074438616489 rx 0.00791297772894
recipe.rcp 14-03-2017-15:55 cibasic 0.00665396222124 0.00770821200216 tx 0.00938002006172
recipe.rcp 14-03-2017-16:27 cibasic 0.00654659192121 0.00791088142395 tx/tx_ 0.010395539525
recipe.rcp 15-03-2017-14:44 ci 0.0106795993772 0.0114679721169 top 0.0128018372288
recipe.rcp 15-03-2017-14:58 sens 0.0101868323628 0.011261329309 tx 0.0131594769347
Try
plot 'data' u 7:xticlabels(2) w boxes, '' u (column(0)):(.5):3 with labels
to place the labels with the boxes, all at the same height (y = 0.5).
To have the labels follow the box height, try
plot 'data' u 7:xticlabels(2) w boxes, '' u (column(0)):(0.01 +$7):3 with labels
I have a simple data I want to plot as 3D plot (3 columns divided by a comma):
33.26,0.0000001,1
67.02,0.0000010,2
101.64,0.0000100,3
137.53,0.0001000,4
175.06,0.0010000,5
214.59,0.0100000,6
256.47,0.1000000,7
301.09,1.0000000,8
348.78,10.0000000,9
399.92,100.0000000,10
454.87,1000.0000000,11
513.99,10000.0000000,12
577.65,10000.0000000,13
646.22,10000.0000000,14
720.05,10000.0000000,15
799.51,10000.0000000,16
884.96,10000.0000000,17
976.77,10000.0000000,18
1075.29,10000.0000000,19
1180.89,10000.0000000,20
1293.92,10000.0000000,21
1414.77,10000.0000000,22
1431.83,10000.0000000,23
1449.15,10000.0000000,24
1466.97,10000.0000000,25
1485.79,10000.0000000,26
1505.97,10000.0000000,27
1527.88,10000.0000000,28
1551.87,10000.0000000,29
1578.3,10000.0000000,30
1607.56,10000.0000000,31
1639.98,10000.0000000,32
1675.95,10000.0000000,33
1715.82,10000.0000000,34
1759.96,10000.0000000,35
1808.72,10000.0000000,36
1862.49,10000.0000000,37
1921.6,10000.0000000,38
1986.44,10000.0000000,39
2057.35,10000.0000000,40
2134.71,10000.0000000,41
2218.87,10000.0000000,42
2310.2,10000.0000000,43
2409.06,10000.0000000,44
2515.83,10000.0000000,45
I wrote a simple script to plot the above data:
#!/usr/bin/gnuplot
set palette rgbformulae 33,13,10
set datafile separator ","
set terminal postscript eps size 10.5, 5.62 enhanced color font 'Helvetica,20' linewidth 2
set output 'test.eps'
set xlabel "time [s] (no operation)" offset -4, 0, 0
set xtics left offset 0,-0.3 rotate by 45 right
set xrange [0:400]
set ylabel "ranges" offset 2, 0, 0
set ytics left offset 0,-0.5
set zlabel "devices" offset -4, 0, 0
set zrange [0:50]
set autoscale
set title " "
set key inside left top;
set dgrid3d 30,30
set hidden3d
set style line 1 linecolor rgb '00FF00' linetype 4 linewidth 1
splot "data.csv" u 1:2:3 title "" with lines palette
And my output:
As you all can see, the output image (or, I should say), the x,y and z ticks on axis x,y, and z are not enough detailed. It is hard to say that the output image was plotted with this data.
Is there a way that would let me manipulate the x,y, and z ticks, to be taken from file, in some elegant way?
I also would like the image to be more readable with new x,y, and z ticks, so I think that the 10000.0000000 value should appear only once, when it appeared for the first time in data file.
Thank you.
Not exactly an answer to your question, and it is my personal opinion, but you might be interested in the ideas:
The data seems not to be grid data, so I would not use a surface plot of any kind.
Plotting only the datapoints in 3d does not give a useful picture, it is only a single line somewhere in space. I would try to use a 2D plot which contains the height information as color.
I would use a logscale for the y-axis.
This leads to the following script:
set terminal pngcairo
set output 'test.png'
set datafile separator ","
set palette rgbformulae 33,13,10
# Set margins to keep colorbox label inside the picture
set lmargin screen 0.12
set rmargin screen 0.85
set xlabel "time [s] (no operation)"
set ylabel "ranges"
set cblabel "devices"
unset key
set yrange [1e-8:1e5]
set ytics format "1e%+T"
set logscale y
set view map
set cbrange [0:50]
set zrange [0:50]
splot "data.csv" u 1:2:3 w p pt 7 palette ,\
"data.csv" every 5::4 u ($1+0):($2/3):(0):($3 != 30 ? 3 : "") with labels
It also prints the z-labels of some datapoints, skipping 30 for spacing reasons.
This is the result:
I want to plot a 18x18 matrix with gnuplot. Here is my codes:
set size ratio 1
set palette gray negative
set xrange[-0.5:17.5]
set yrange[-0.5:17.5]
set cbrange[-0.2:0.8]
set xtics 0,1,17
set ytics 0,1,17
set xtics offset -0.5,0
set title "Resolusition Matrix for E"
plot "Mat" matrix w image noti
Then I got a fig like this:
Now I would like to add borders to each cell, which will look like this:
Thank you.
For your case you can set one minor tic, which then lies on the border between two pixels, and draw a grid on them:
set size ratio 1
set palette gray negative
set autoscale xfix
set autoscale yfix
set xtics 1
set ytics 1
set title "Resolution Matrix for E"
set tics scale 0,0.001
set mxtics 2
set mytics 2
set grid front mxtics mytics lw 1.5 lt -1 lc rgb 'white'
plot "Mat" matrix w image noti
Note, that set grid front also brings the tics to the front. To avoid that you can scale the tics to 0. For the minor tics you must use a very small number, 0 would omit the grid lines on the minor tics.
The result with 4.6.3 is:
EDIT: In order to control the grid lines and tic labels independently, you can use the unused x2 and y2 to draw the grid (inspired by an answer to How do I draw a vertical line in gnuplot?):
set size ratio 1
set palette gray negative
# grid lines
set x2tics 1 format '' scale 0,0.001
set y2tics 1 format '' scale 0,0.001
set mx2tics 2
set my2tics 2
# labeling
set xtics 5 out nomirror
set ytics 5 out nomirror
set grid front mx2tics my2tics lw 1.5 lt -1 lc rgb 'white'
set xrange[-0.5:39.5]
set yrange[-0.5:39.5]
set x2range[-0.5:39.5]
set y2range[-0.5:39.5]
plot "Mat" matrix w image notitle
With gnuplot version 4.6, this requires setting explicit ranges, so that the x and x2 (unused!) are equal. The information might be extracted with stats from the data file.
Using version 5 allows you to use set link. Instead of all the set *range stuff. You could use:
set autoscale fix
set link x
set link y
Result:
As the title says, I want to find a way to control the xtics in multiplot mode. The output is the following
The plots shown in the first two rows are OK. However, the following three suffer from the very same problem. The numbers on the x axes are very close to each other and in some cases overlapping. So, is there a way to fix this? All input is read from external data files and I cannot know beforehand what is the maximum value of t so as to set xrange [0:max] in every plot and then control the xtics. By the way, is it possible in gnuplot to read the external data file before the plot stage and define the maximum value of t in each plot?
Many thanks in advance.
EDIT
The script used to produce the above output is the following:
reset
set term postscript eps enhanced "Helvetica" 20 size 7in, 11in
set output 'plots.eps'
set size 1,1
set multiplot layout 4, 2
unset key
# plotting the time-evolution of the mLCN
set xrange [*:*]
set xlabel 't'
set ylabel 'mLCN'
plot "hh.rli" u 1:3 w l lc rgb 'black'
# plotting the time-evolution of the RLI
set xrange [*:*]
set xlabel 't'
set ylabel 'log(RLI)'
plot "hh.rli" u 1:(log10($2)) w l lc rgb 'black'
# plotting the time-evolution of the FLI
set xrange [*:*]
set xlabel 't'
set ylabel 'log(FLI)'
plot "hh.fli" u 1:(log10($2)) w l lc rgb 'black'
# plotting the time-evolution of the OFLI
set xrange [*:*]
set xlabel 't'
set ylabel 'log(OFLI)'
plot "hh.fli" u 1:(log10($3)) w l lc rgb 'black'
# plotting the time-evolution of the SALI
set xrange [*:*]
set xlabel 't'
set ylabel 'log(SALI)'
plot "hh.sali" u 1:(log10($2)) w l lc rgb 'black'
# plotting the time-evolution of the GALIs
set xrange [*:*]
set xlabel 't'
set ylabel 'log(GALIs)'
plot "hh.gali" u 1:(log10($2)) w l lt 1 lc rgb 'green',\
"hh.gali" u 1:(log10($3)) w l lt 1 lc rgb 'red',\
"hh.gali" u 1:(log10($4)) w l lt 1 lc rgb 'blue'
# plotting the time-evolution of the MEGNO
set xrange [*:*]
set xlabel 't'
set ylabel 'MEGNO'
plot "hh.megno" u 1:2 w l lc rgb 'black'
# plotting the time-evolution of the Spectral Distance (D)
set xrange [*:*]
set yrange [-0.1:4]
set xlabel 't'
set ylabel 'D'
plot "hh.sd" u 1:2 w l lc rgb 'black'
unset multiplot
reset
set terminal windows
quit
You can tell gnuplot to rotate the tick labels with:
set xtics rotate
That'll take more vertical space, though. You can probably find a compromise solution by picking an angle less than 90 degrees with:
set xtics rotate by 45
or whatever angle looks best.
You can try increasing the distance between individual tics. For example, in the bottom left corner plot, instead of showing every 500th tic, you may show every 1000th. This can be easily achieved by using
set xtics 1000