Related
I am running R on Windows, not as an administrator. When I install a package, the following command doesn't work:
> install.packages("zoo")
Installing package(s) into ‘C:/Program Files/R/R-2.15.2/library’
(as ‘lib’ is unspecified)
Warning in install.packages :
'lib = "C:/Program Files/R/R-2.15.2/library"' is not writable
To install a package, I have to specify a library location:
install.packages("zoo", lib="C:/software/Rpackages")
To load a package, I also have to specify the library location:
library("zoo", lib.loc="C:/software/Rpackages")
All of this is OK, but I wanted to see if I could add C:/software/Rpackages to the library path somehow and thus not have to type it each time.
As I searched online, I found that one way to do this is to edit the Rprofile.site file and to add the line
.libPaths("C:/software/Rpackages")
However, after doing this, and starting RStudio, this is the output that I get
> .libPaths()
[1] "C:/Program Files/R/R-2.15.2/library" "C:/Program Files/RStudio/R/library"
The .libPaths command that I added to the Rprofile.site doesn't seem to have had any effect! Why is this the case? Or more importantly, how can I fix the problem so that I can install and load packages without typing in the library location?
Note: if I start RStudio the .libPaths() command seems to work as it is supposed to
.libPaths("C:/software/Rpackages")
> .libPaths()
[1] "C:/software/Rpackages" "C:/Program Files/R/R-2.15.2/library"
Isn't that strange?
The proper solution is to set environment variable R_LIBS_USER to the value of the file path to your desired library folder as opposed to getting RStudio to recognize a Rprofile.site file.
To set environment variable R_LIBS_USER in Windows, go to the Control Panel (System Properties -> Advanced system properties -> Environment Variables -> User Variables) to a desired value (the path to your library folder), e.g.
Variable name: R_LIBS_USER
Variable value: C:/software/Rpackages
If for some reason you do not have access to the control panel, you can try running rundll32 sysdm.cpl,EditEnvironmentVariables from the command line on Windows and add the environment variable from there.
Setting R_LIBS_USER will ensure that the library shows up first in .libPaths() regardless of starting RStudio directly or by right-clicking an file and "Open With" to start RStudio.
The Rprofile solution can work if RStudio is always started by clicking the RStudio shortcut. In this case, setting the default working directory to the directory that houses your Rprofile will be sufficient. The Rprofile solution does not work when clicking on a file to start RStudio because that changes the working directory away from the default working directory.
I generally try to keep all of my packages in one library, but if you want to add a library why not append the new library (which must already exist in your filesystem) to the existing library path?
.libPaths( c( .libPaths(), "~/userLibrary") )
# obviously this would need to be a valid file directory in your OS
# min just happened to be on a Mac that day
Or (and this will make the userLibrary the first place to put new packages):
.libPaths( c( "~/userLibrary" , .libPaths() ) )
Then I get (at least back when I wrote this originally):
> .libPaths()
[1] "/Library/Frameworks/R.framework/Versions/2.15/Resources/library"
[2] "/Users/user_name/userLibrary"
The .libPaths function is a bit different than most other nongraphics functions. It works via side-effect. The functions Sys.getenv and Sys.setenv that report and alter the R environment variables have been split apart but .libPaths can either report or alter its target.
The information about the R startup process can be read at ?Startup help page and there is RStudio material at: https://support.rstudio.com/hc/en-us/articles/200549016-Customizing-RStudio
In your case it appears that RStudio is not respecting the Rprofile.site settings or perhaps is overriding them by reading an .Rprofile setting from one of the RStudio defaults. It should also be mentioned that the result from this operation also appends the contents of calls to .Library and .Library.site, which is further reason why an RStudio- (or any other IDE or network installed-) hosted R might exhibit different behavior.
Since Sys.getenv() returns the current system environment for the R process, you can see the library and other paths with:
Sys.getenv()[ grep("LIB|PATH", names(Sys.getenv())) ]
The two that matter for storing and accessing packages are (now different on a Linux box):
R_LIBS_SITE /usr/local/lib/R/site-library:/usr/lib/R/site-library:/usr/lib/R/library
R_LIBS_USER /home/david/R/x86_64-pc-linux-gnu-library/3.5.1/
I managed to solve the problem by placing the code in the .Rprofile file in the default working directory.
First, I found the location of the default working directory
> getwd()
[1] "C:/Users/me/Documents"
Then I used a text editor to write a simple .Rprofile file with the following line in it
.libPaths("C:/software/Rpackages")
Finally, when I start R and run .libPaths() I get the desired output:
> .libPaths()
[1] "C:/software/Rpackages" "C:/Program Files/R/R-2.15.2/library"
[3] "C:/Program Files/RStudio/R/library"
https://superuser.com/questions/749283/change-rstudio-library-path-at-home-directory
Edit ~/.Renviron
R_LIBS_USER=/some/path
I found what I think is a solution here (thank you Carl Schwarz at SFU) for adding a personal library that is permanently (you don't have to define it each session) recognized whether using R or Rstudio, and Rstudio treats it as the default on my Mac machine. I hadn't seen it laid out this explicitly on SO, so I summarized the steps they provided, for Windows and then for Mac.
For a Windows 7 OS:
Create a directory on the drive where you want to have your personal library, e.g. C:\User\Rlibs (or another that you have permissions to)
Search for/go to "Edit environment variable for your account" in the Windows search bar to edit control panel settings
Click "New..." in the middle of the "Environmental Variables" window
In the "New User Variable" window, type R_LIBS for the "Variable name", and the path to the personal library directory you created, e.g. C:\User\Rlibs
Click OK and you should see the Variable/Value pair in the User variables window
Click OK again
Now when you start R (or Rstudio) and type the command .libPaths() you should see the personal library you created as well as the R system library.
For Mac:
In your "Home" or "username" directory create a folder called Rlibs
Launch the Terminal application
Type: echo "R_LIBS=~/Rlibs" > .Renviron Make sure the spelling and case matches.
Type ls -a to see the full list of files in the directory, which should now include .Renvrion
Verify that the .Renviron file has been set properly: more .Renviron
Launch R/Rstudio and type .libPaths() and you should see the new path to your personal library.
If you do not have admin-rights, it can also be helpful to open the Rprofile.site-file located in \R-3.1.0\etc and add:
.First <- function(){
.libPaths("your path here")
}
This evaluates the .libPath() command directly at start
just change the default folder for your R libraries in a directory with no Administrator rights, e.g.
.libPaths("C:/R/libs")
On Ubuntu, the recommended way of changing the default library path for a user, is to set the R_LIBS_USER variable in the ~/.Renviron file.
touch ~/.Renviron
echo "R_LIBS_USER=/custom/path/in/absolute/form" >> ~/.Renviron
I've had real trouble understanding this. gorkypl gave the correct solution above when I last re-installed my OS & Rstudio but this time round, setting my environment variable didn't resolve.
Uninstallled both R and Rstudio, creating directories C:\R and C:\Rstudio then reinstalled both.
Define R_LIBS_USER user variable to your prefered directory (as per gorkypl's answer) and restart your machine for User variable to be loaded. Open Rstudio, errors should be gone.
You can also use Sys.setenv() to modify R_LIBS_USER to the path of your alternative library which is easier and does not need to restart your computer.
To see what R_LIBS_USER is set to:
?Sys.getenv()
Reading help(Startup) is useful.
If your default package library has been changed after installing a new version of R or by any other means, you can append both the libraries to use all the packages with the help of the commands below.
Get the existing library path :
.libPaths()
Now,set the existing and the old path :
.libPaths(c(.libPaths(), "~/yourOldPath"))
Hope it helps.
I read the readme. In that they mentioned use .libPaths() in command line to check which paths are there. I had 2 library paths earlier. When I used the command .libpath("C:/Program Files/R/R-3.2.4revised/library") where I wanted, it changed the library path. When I typed in .libPaths() at the command line again it showed me the correct path. Hope this helps
getwd()
# [1] "C:/Users/..../software/My R studio"
copy the above link with double inverted comma
.libPaths(new="C:/Users/..../software/My R studio")
Your default path will change for installing pakages
If you want to change your library path permanently (without calling .libPath() every time when entering in R, this works for me:
create .Rprofile under your home directory. (~/.Rprofile)
type
.libPaths(c( .libPaths(), "your new path" ))
in .Rprofile file, save.
open R (any directory) and check, just type .libPaths(), you can find your libaray path is updated!
Since most of the answers here are related to Windows & Mac OS, (and considering that I also struggled with this) I decided to post the process that helped me solve this problem on my Arch Linux setup.
Step 1:
Do a global search of your system (e.g. ANGRYSearch) for the term Renviron (which is the configuration file where the settings for the user libraries are set).
It should return only two results at the following directory paths:
/etc/R/
/usr/lib/R/etc/
NOTE: The Renviron config files stored at 1 & 2 (above) are hot-linked to each other (which means changes made to one file will automatically be applied [ in the same form / structure ] to the other file when the file being edited is saved - [ you also need sudo rights for saving the file post-edit ] ).
Step 2:
Navigate into the 1st directory path ( /etc/R/ ) and open the Renviron file with your favourite text editor.
Once inside the Renviron file search for the R_LIBS_USER tag and update the text in the curly braces section to your desired directory path.
EXAMPLE:
... Change From ( original entry ):
R_LIBS_USER=${R_LIBS_USER-'~/R/x86_64-pc-linux-gnu-library/4.0'}
... Change To ( your desired entry ):
R_LIBS_USER=${R_LIBS_USER-'~/Apps/R/rUserLibs'}
Step 3:
Save the Renviron file you've just edited ... DONE !!
I had the same problem and I run into this. If you want to create another location c("C:/Users/mynewlocation") should be working as well. As mentioned in here "You should be able to right-click on the Rstudio.exe icon, click Properties, and select an option to always run Rstudio as administrator. Be sure you use that same icon whenever you want to open Rstudio."
myPaths <- .libPaths() # get the paths
myPaths <- c(myPaths[2], myPaths[1]) # switch them
.libPaths(myPaths) # reassign them
I was looking into this because R was having issues installing into the default location and was instead just putting the packages into the temp folder. It turned out to be the latest update for Mcaffee Endpoint Security which apparently has issues with R. You can disable the threat protection while you install the packages and it will work properly.
After having set the path for the default working directory as well as my first (and only) project within RStudio options I wonder why RStudio keeps creating an empty folder named "R" within my "/home" directory every time it is started.
Is there any file I could delete/edit (eventually create) to stop this annoying behaviour and if so, where is it located ?
System: Linux Mint v. 19.3
Software: RStudio v. 1.3.959 / R version 3.4.4
Thanks in advance for any hints.
Yes, you can prevent the creation of the R directory — R is configurable via a set of environment variables.
However, setting these correctly isn’t trivial. The first issue is that many R packages are sensitive to the R version they’re installed with. If you upgrade R and try to load the existing package, it may break. Therefore, the R package library path should be specific to the R version.
On clusters, an additional issue is that the same library path might be read by various cluster nodes that run on different architectures; this is rare, but it happens. In such cases, compiled R packages might need to be different depending on the architecture.
Consequently, in general the R library path needs to be specific both to the R version and the system architecture.
Next, even if you configure an alternative path R will silently ignore it if it doesn’t exist. So be sure to manually create the directory that you’ve configured.
Lastly, where to put this configuration? One option would be to put it into the user environment file, the path of which can be specified with the environment variable R_ENVIRON_USER — it defaults to $HOME/.Renviron. This isn’t ideal though, because it means the user can’t temporarily override this setting when calling R: variables in this file override the calling environment.
Instead, I recommend setting this in the user profile (e.g. $HOME/.profile). However, when you use a desktop launcher to launch your RStudio, this file won’t be read, so be sure to edit your *.desktop file accordingly.1
So in sum, add the following to your $HOME/.profile:
export R_LIBS_USER=${XDG_DATA_HOME:-$HOME/.local/share}/R/%p-library/%v
And make sure this directory exists: re-source ~/.profile (launching a new shell inside the current one is not enough), and execute
mkdir -p "$(Rscript -e 'cat(Sys.getenv("R_LIBS_USER"))')"
The above is using the XDG base dir specification, which is the de-facto standard on Linux systems.2 The path is using the placeholders %p and %v. R will fill these in with the system platform and the R version (in the form major.minor), respectively.
If you want to use a custom R configuration file (“user profile”) and/or R environment file, I suggest setting their location in the same way, by configuring R_PROFILE_USER and R_ENVIRON_USER (since their default location, once again, is in the user home directory):
export R_PROFILE_USER=${XDG_CONFIG_HOME:-$HOME/.config}/R/rprofile
export R_ENVIRON_USER=${XDG_CONFIG_HOME:-$HOME/.config}/R/renviron
1 I don’t have a Linux desktop system but I believe that editing the Env entry to the following should do it:
Exec=env R_LIBS_USER=${XDG_DATA_HOME:-$HOME/.local/share}/R/%p-library/%v /path/to/rstudio
2 Other systems require different handling. On macOS, the canonical setting for the library location would be $HOME/Library/Application Support/R/library/%v. However, setting environment variables on macOS for GUI applications is frustratingly complicated.
On Windows, the canonical location is %LOCALAPPDATA%/R/library/%v. To set this variable, use [Environment]::SetEnvironmentVariable in PowerShell or, when using cmd.exe, use setx.
Asked on superuser and got crickets, so trying here. This one seems to straddle the border of SU/SO.
In troubleshooting some kind of R configuration issue that was causing a pandoc conversion failure when trying to Knit a .Rmd on a colleague's Windows 10 machine, I noticed that the first path in .libPaths() was pointing to a path on a network directory rather than the c:/Users/[username]/R/win-library/... directory.
Running Sys.getenv() in R showed that HOMEDRIVE and HOMEPATH were (as expected) c: and \Users\[username], yet there was a HOME environment variable listed that was pointing to the network path that we'd found in .libPaths()
Running SET in a cmd shell did not list this HOME environment variable at all, so it seems to be something that R found somewhere else...
Where does R get this HOME environment variable?
FWIW: I fixed the config issue by setting a Windows User Environment variable HOME=%HOMEDRIVE%%HOMEPATH%; R then set all the other environment variables appropriately from there.
R startup is somewhat complicated, but it is pretty well documented. The usual starting place is help("Startup"). The answer to your question is not documented there, but you will find this clue in the See also section:
For the definition of the ‘home’ directory on Windows see the ‘rw-FAQ’
Q2.14. It can be found from a running R by Sys.getenv("R_USER")
and indeed the cited FAQ at https://cran.r-project.org/bin/windows/base/rw-FAQ.html#What-are-HOME-and-working-directories_003f gives us the answer:
The home directory is set as follows: If environment variable R_USER
is set, its value is used. Otherwise if environment variable HOME is
set, its value is used. After those two user-controllable settings, R
tries to find system-defined home directories. It first tries to use
the Windows "personal" directory (typically
C:\Users\username\Documents). If that fails, if both environment
variables HOMEDRIVE and HOMEPATH are set (and they normally are), the
value is ${HOMEDRIVE}${HOMEPATH}. If all of these fail, the current
working directory is used.
You might want to take a look at the here package and, relating to knitr, the ezknitr package. Also, in RStudio, you can specify in the knit menu if the knitting will happen in the current dir, working dir or project dir, as shown here.
Update: let me reiterate the message here since it got downvoted: in a typical usage scenario you don't have to modify the HOME environment variable. Using a proper workflow (e.g. RStudio projects or the here package) is a more robust and portable solution.
I have attempted to install R and R studio on the local drive on my work computer as opposed to the organization network folder because anything that runs through the network is really slow. When installing, the destination path shows that it's my local C:drive. However, when I install a new package, the default path shown is my network drive and there is no option to change:
.libPaths()
[1] "\\\\The library/path/I/don't/want"
[2] "C:/Program Files/R/R-3.2.1/library"
I'm running windows 7 professional. How can I remove library path [1] and make path [2] my primary for all base packages and all new packages that I install?
Windows 7/10: If your C:\Program Files (or wherever R is installed) is blocked for writing, as mine is, then you'll get frustrated editing RProfile.site (as I did). As specified in the accepted answer, I updated R_LIBS_USER and it worked. However, even after reading the fine manual several times and extensive searching, it took me several hours to do this. In the spirit of saving someone else time...
Let's assume you want your packages to reside in C:\R\Library:
Create the folder C:\R\Library. Next I need to add this folder to the R_LIBS_USER path:
Click Start --> Control Panel --> User Accounts --> Change my environmental variables
The Environmental Variables window pops up. If you see R_LIBS_USER, highlight it and click Edit. Otherwise click New. Both actions open a window with fields for Variable and Value.
In my case, R_LIBS_USER was already there, and Value was a path to my desktop. I added to the path the folder that I created, separated by semicolon. C:\R\Library;C:\Users\Eric.Krantz\Desktop\R stuff\Packages.
(NOTE: In the last step, I could have removed the path to the Desktop location and simply left C:\R\Library).
See help(Startup) and help(.libPaths) as you have several possibilities where this may have gotten set. Among them are
setting R_LIBS_USER
assigning .libPaths() in .Rprofile or Rprofile.site
and more.
In this particular case you need to go backwards and unset whereever \\\\The library/path/I/don't/want is set.
To otherwise ignore it you need to override it use explicitly i.e. via
library("somePackage", lib.loc=.libPaths()[-1])
when loading a package.
Facing the very same problem (avoiding the default path in a network) I came up to this solution with the hints given in other answers.
The solution is editing the Rprofile file to overwrite the variable R_LIBS_USER which by default points to the home directory.
Here the steps:
Create the target destination folder for the libraries, e.g.,
~\target.
Find the Rprofile file. In my case it was at C:\Program Files\R\R-3.3.3\library\base\R\Rprofile.
Edit the file and change the definition the variable R_LIBS_USER. In my case, I replaced the this line file.path(Sys.getenv("R_USER"), "R", with file.path("~\target", "R",.
The documentation that support this solution is here
Original file with:
if(!nzchar(Sys.getenv("R_LIBS_USER")))
Sys.setenv(R_LIBS_USER=
file.path(Sys.getenv("R_USER"), "R",
"win-library",
paste(R.version$major,
sub("\\..*$", "", R.version$minor),
sep=".")
))
Modified file:
if(!nzchar(Sys.getenv("R_LIBS_USER")))
Sys.setenv(R_LIBS_USER=
file.path("~\target", "R",
"win-library",
paste(R.version$major,
sub("\\..*$", "", R.version$minor),
sep=".")
))
Windows 10 on a Network
Having your packages stored on the network drive can slow down the performance of R / R Studio considerably, and you spend a lot of time waiting for the libraries to load/install, due to the bottlenecks of having to retrieve and push data over the server back to your local host. See the following for instructions on how to create an .RProfile on your local machine:
Create a directory called C:\Users\xxxxxx\Documents\R\3.4 (or whatever R version you are using, and where you will store your local R packages- your directory location may be different than mine)
On R Console, type Sys.getenv("HOME") to get your home directory (this is where your .RProfile will be stored and R will always check there for packages- and this is on the network if packages are stored there)
Create a file called .Rprofile and place it in :\YOUR\HOME\DIRECTORY\ON_NETWORK (the directory you get after typing Sys.getenv("HOME") in R Console)
File contents of .Rprofile should be like this:
#search 2 places for packages- install new packages to first directory- load built-in packages from the second (this is from your base R package- will be different for some)
.libPaths(c("C:\Users\xxxxxx\Documents\R\3.4", "C:/Program Files/Microsoft/R Client/R_SERVER/library"))
message("*** Setting libPath to local hard drive ***")
#insert a sleep command at line 12 of the unpackPkgZip function. So, just after the package is unzipped.
trace(utils:::unpackPkgZip, quote(Sys.sleep(2)), at=12L, print=TRUE)
message("*** Add 2 second delay when installing packages, to accommodate virus scanner for R 3.4 (fixed in R 3.5+)***")
# fix problem with tcltk for sqldf package: https://github.com/ggrothendieck/sqldf#problem-involvling-tcltk
options(gsubfn.engine = "R")
message("*** Successfully loaded .Rprofile ***")
Restart R Studio and verify that you see that the messages above are displayed.
Now you can enjoy faster performance of your application on local host, vs. storing the packages on the network and slowing everything down.
I was struggling for a while with this as my work computer (with Windows 10) created the default user library on a network drive, which would slow down R and RStudio to an unusable state.
In case this helps someone, this is the easiest way I found, without requiring admin rights:
make sure the directory you want to install your packages into exists. If you want to respect the convention, use: C:\Users\username\R\win-library\rversion (for example, something like: C:\Users\janebloggs\R\win-library\3.6)
create a .Renviron file in your home directory (which might be on the network drive?), and in it, write one single line that defines the R_LIBS_USER variable to be your custom path:
R_LIBS_USER=C:\Users\janebloggs\R\win-library\3.6
(feel free to add comments too, with lines starting with #)
If a .Renviron file exists, R will read it at startup and use the variables as they are defined in there, before running the code in the .Rprofile. You can read about it in help(Startup).
Now it should be persistent between sessions!
After a couple of hours of trying to solve the issue in several ways, some of which are described here, for me (on Win 10) the option of creating a Renviron file worked, but a little different from what was written here above.
The task is to change the value of the variable R_LIBS_USER. To do this two steps needed:
Create the file named Renviron (without dot) in the folder \Program\etc\ (Program is the directory where R is installed--for example, for me it was C:\Program Files\R\R-4.0.0\etc)
Insert a line in Renviron with new path: R_LIBS_USER = "C:/R/Library"
After that, reboot R and use .libPaths() to confirm the default directory changed.
I think I tried all of the above and it didn't work for me. This worked, though:
In home directory, make a file called ".Renviron"
In that file, write:
.libPaths(new = "/my/path/to/libs")
Save and restart R if you had it open
Hello this is likely to be a silly question, sorry for that.
I want to change the library folder in Windows but I do not understand what is said in the cran website:
You may also want to add command-line arguments at the end of the Target field (after any final double quote, and separated by a space), for example --sdi --max-mem-size=1G. You can also set environment variables at the end of the Target field, for example R_LIBS=p:/myRlib, and if you want to ensure that menus and messages are in (American) English, LANGUAGE=en.
When I set the R_LIBS variable in R with R_LIBS="C:/R/i686-pc-linux-gnu-library/3.0" it doen't give any error but the folder path for the library does not change becuse when I type require(package) it is not found.
I saw this post and it says it can be due to the R.profile. I don't know how to deal with the error, should I just remove R and install it from the beginning?
You should set the environment variable R_LIBS in Windows ( not within R) to something like
R_LIBS=C:/R/i686-pc-linux-gnu-library/3.0
Restart R.
Note to set the environment variable you can use setx command:
Open a cmd console (command line console)
setx R_LIBS %R_LIBS%;C:/R/i686-pc-linux-gnu-library/3.0;