We have a Java Application in a Docker Container with a Docker Db2 database 'side-car'. In DevOps pipeline (Jenkins) we run unit tests, and integration test between components. Run SonarQube and if all good, we move over to the Staging environment. In the Automated Testing step we build application container using latest code base, we then proceed to run automated Acceptance Testing using Cucumber framework.
Question is about the use of database for testing: should we spin up a db2 in a new/isolated container, or use a 'common' DB2 container that the test team uses in that env for manual testing? Best practices, proven approaches and recommendations are needed.
for post deployment tests (API tests, end to end tests), I would try to avoid using the same db with other environments and have dedicated database setup for those tests.
The reasons are:
For API tests, end to end tests, I want to have control on what data is available in database. If sharing database with other environments, the tests can fail for strange reason (.e.g. someone accidentally modify the record that the test is expecting to be in some state)
For the same reason, I don't want the API tests, end to end tests to affect other people testing also. It will be quite annoying if someone is in the middle of testing and realise the data is wiped out by post deployment tests
So normally in the CI, we have steps to:
clear test db
run migration
seed essential data
deploy server
run post deployment tests
I'm new to DevOps, so forgive me if this is trivial, but given the following workflow, what is the purpose of the integration server?
I've been given the following steps as an example of an approach to DevOps at my organisation :
Developers check in changes to source control (TFS).
Build server checks for changes.
Artefacts of the build are deployed to an "integration server" which has a copy of our ERP on it.
A release management application takes the output from this ERP environment and moves it to test, pre-production, and production environment as and when.
Is this approach correct, and if so, is the purpose of an integration server merely to provide a working implementation of code, that isn't accessed for any means other than moving code onto other servers?
My answer is making some assumptions on what it sounds like is going on in your environment.
When you check in changes to source control with AX, it's adding *.xpo text files of the code/objects that are your changes only.
It sounds like your "integration server" is a build/staging server. Imagine these two scenarios:
You have a customization with 3 objects, and you add 2 of the objects to source control and forget one. When you build on the integration server, it could have compile errors because that missing dependent object.
In your development environment, you create test forms and jobs that are basically junk you are experimenting with. You do not add these objects to source control. You wouldn't want this code to be deployed to your other environments, so the integration environment ensures the code is strictly from the repo.
Doing full compiles/syncs against the integration will also help identify issues. Then you can deploy the environment in its entirety to your other environments.
The big thing to realize is that your repo is really only your changes to the base (sys/syp) code. So part of the integration/build process is your code & base code combining.
We have a complete Lab Management environment running Coded UI tests in nightly builds. What we are trying to achieve is to run our integration tests (regular TestMethod() with SQL connections) just before all the Coded UI tests to verify that our db scripts are executed correctly and that there are no new changes causing any problems.
So far I have found a way to execute tests remotely through .testrunconfig. The problem we have with that approach is that it's not possible to choose a testcontroller connected to a team project so I guess that would be only useful for running tests on physical machines outside of Lab Management?
One option seem to be to create a Test Case for each integration test and that should run it together with the UI tests but it feels like it will be to much maintenance managing hundreds of test cases just to run the integration tests. Also it would be better to completely separate the test runs for the different kinds of tests.
Is there any easy way to achieve this that I have totally missed? Or do I have to modify the lab build template to deploy and run the tests?
I guess that would be only useful for running tests on physical machines outside of Lab Management?
If you run your tests remotely through .testrunconfig you have to connect the Test Agent to another Test Controller which is NOT connected to the team project.
Unfortunately it is impossible for the environment which are running under the Lab Management, to my knowledge.
What about this approach:
Create an Ordered Test containing all you integration tests.
Create a new Test Case "Integration Tests" and automate it by the ordered test
So you do not have to maintain hundreds of Test Cases.
You could also create several Ordered Tests if you want to group the integration tests and then
create a "main" Ordered Test containing them.
This way it will be easier to analyze test results especially if you have a lot of tests.
Let the integration tests run as a part of your existing nightly build.
Create a new Build Definition which does not start a build but uses the last successful nightly build and let your CodedUI tests run using Lab Build Template.
This way you will have different test runs for the different kinds of tests.
The only drawback is that you have to "synchronize" these two builds...
You could just schedule the second build later so you could be sure the fist build is done.
It's not really perfect, I know... but this way you could easily achieve your goal.
I am not sure if there is an alternative solution, but on the project I am currently working on we have both our Unit and Integration Test Assemblies set under the Process options (Process>Basic>AutomatedTest>TestAssembly) in our Nightly Build. This was achieved through altering the Default Build Process Template (not the Lab Default) a bit, as you suggested (I thought this was standard, but it's been a while).
Is there any web-based test runner; to run a web-site's unit tests from the web-site?
i know this is runs afoul of some people's dogma, but i want to be able to run unit tests from inside the product i'm testing. Whether this be from inside the native Win32 executable, or from within a .NET executable.
A guy has already written a web-based AJAX test runner for UnitTest++.
In the past i had to rip apart NUnit, so i could tests embedded in the executable without having to ship NUnit dlls. This required me to also write my own graphical test-runner for Windows/WinForms.
Has anyone already done the work of creating runnable unit-tests for ASP.net?
Note: The usual response by people: "Unit tests are not supposed to be in the final product, and definitely not accessible by testers, support, or developers, when on-site."
Note: You may disagree with my desire to run unit tests, but don't let that affect your answer. If there is no web-based nunit test runner for ASP.net then that's the answer. Don't be afraid to answer the question. i won't bite.
I think the reasons why you want to do this kind of thing is because of the lack of a Continuous Integration server, I cannot think another justification, so instead of trying to patch your design by doing this, it would be cleaner if you evaluate the implementation of a CI server (which it's not so difficult, for instance you could look at: NCastor)
So in my opinion what you need is to setup a continuous integration server in order to run unit tests and integration tests automatically as part of your automated build process.
You would be deploying your application to the next 'stage' only when the build process and the tests are valid, you can also configure the CI server to perform:
run tests
run static analysis
run non-static analysis
generate tests-reports
run tests with test coverage
calculate and set application version
create packages of your application
modify config files according to the target stage
minify your scripts
send emails when a build fails
Among others
And as you mentioned, you wouldn't need to deploy the tests to your production servers
I strongly recommend you to read the next article:
http://misko.hevery.com/2008/07/16/top-10-things-i-do-on-every-project/
And this is a list of some CI servers
Jenkins - Free & Easy configuration
Hudson - Free & Easy configuration
TeamCity - Free for Open Source projects
Cruise Control - Free (however, this has decreased in popularity because configuration is only available through XML files, it's annoying...)
Found NUnitWebRunner on github https://github.com/tonyx/NUnitWebRunner
I'm looking for suggestions to improve the process of automating functional testing of a website. Here's what I've tried in the past.
I used to have a test project using WATIN. You effectively write what look like "unit tests" and use WATIN to automate a browser to click around your site etc.
Of course, you need a site to be running. So I made the test actually copy the code from my web project to a local directory and started a web server pointing to that directory before any of the tests run.
That way, someone new could simply get latest from our source control and run our build script, and see all the tests run. They could also simply run all the tests from the IDE.
The problem I ran into was that I spent a lot of time maintaining the code to set up the test environment more than the tests. Not to mention that it took a long time to run because of all that copying. Also, I needed to test out various scenarios including installation, meaning I needed to be able to set the database to various initial states.
I was curious on what you've done to automate functional testing to solve some of these issues and still keep it simple.
MORE DETAILS
Since people asked for more details, here it is. I'm running ASP.NET using Visual Studio and Cassini (the built in web server). My unit tests run in MbUnit (but that's not so important. Could be NUnit or XUnit.NET). Typically, I have a separate unit test framework run all my WATIN tests. In the AssemblyLoad phase, I start the webserver and copy all my web application code locally.
I'm interested in solutions for any platform, but I may need more descriptions on what each thing means. :)
Phil,
Automation can just be hard to maintain, but the more you use your automation for deployment, the more you can leverage it for test setup (and vice versa).
Frankly, it's easier to evolve automation code, factoring it and refactoring it into specific, small units of functionality when using a build tool that isn't
just driving statically-compiled, pre-factored units of functionality, as is the case with NAnt and MSBuild. This is one of the reasons that many people who were relatively early users of toole like NAnt have moved off to Rake. The freedom to treat build code as any other code - to cotinually evolve its content and shape - is greater with Rake. You don't end up with the same stasis in automation artifacts as easily and as quickly with Rake, and it's a lot easier to script in Rake than NAnt or MSBuild.
So, some part of your struggle is inherently bound up in the tools. To keep your automation sensible and maintained, you should be wary of obstructions that static build tools like NAnt and MSBuild impose.
I would suggest that you not couple your test environment boot-strapping from assembly load. That's an inside-out coupling that only serves brief convenience. There's nothing wrong (and, likely everything right) with going to the command line and executing the build task that sets up the environment before running tests either from the IDE or from the command line, or from an interactive console, like the C# REPL from the Mono Project, or from IRB.
Test data setup is simply just a pain in the butt sometimes. It has to be done.
You're going to need a library that you can call to create and clean up database state. You can make those calls right from your test code, but I personally tend to avoid doing this because there is more than one good use of test data or sample data control code.
I drive all sample data control from HTTP. I write controllers with actions specifically for controlling sample data and issue GETs against those actions through Selenium. I use these to create and clean up data. I can compose GETs to these actions to create common scenarios of setup data, and I can pass specific values for data as request parameters (or form parameters if needs be).
I keep these controllers in an area that I usually call "test_support".
My automation for deploying the website does not deploy the test_support area or its routes and mapping. As part of my deployment verification automation, I make sure that the test_support code is not in the production app.
I also use the test_support code to automate control over the entire environment - replacing services with fakes, turning off subsystems to simulate failures and failovers, activating or deactivating authentication and access control for functional testing that isn't concerned with these facets, etc.
There's a great secondary value to controlling your web app's sample data or test data from the web: when demoing the app, or when doing exploratory testing, you can create the data scenarios you need just by issuing some gets against known (or guessable) urls in the test_support area. Really making a disciplined effort to stick to restful routes and resource-orientation here will really pay off.
There's a lot more to this functional automation (including test, deployment, demoing, etc) so the better designed these resources are, the better the time you'll have maintaining them over the long hall, and the more opportunities you'll find to leverage them in unforseen but beneficial ways.
For example, writing domain model code over the semantic model of your web pages will help create much more understandable test code and decrease the brittleness. If you do this well, you can use those same models with a variety of different drivers so that you can leverage them in stress tests and load tests as well as functional test as well as using them from the command line as exploratory tools. By the way, this kind of thing is easier to do when you're not bound to driver types as you are when you use a static language. There's a reason why many leading testing thinkers and doers work in Ruby, and why Watir is written in Ruby. Reuse, composition, and expressiveness is much easier to achieve in Ruby than C# test code. But that's another story.
Let's catch up sometime and talk more about the other 90% of this stuff :)
We used Plasma on one project. It emulates a web server in process - just point it at the root of your web application project.
It was surprisingly stable - no copying files or starting up an out of process server.
Here is how a test using Plasma looks for us...
[Test]
public void Can_log_in() {
AspNetResponse response = WebApp.ProcessRequest("/Login.aspx");
AspNetForm form = response.GetForm();
form["UserName"] = User.UserName;
form["Password"] = User.Password;
AspNetResponse loggedIn = WebApp.ProcessRequest(Button.Click(form, "LoginUser"));
Assert.IsTrue(loggedIn.IsRedirect());
AspNetResponse homePage = WebApp.ProcessRequest(loggedIn.GetRedirectUrl());
Assert.AreEqual(homePage.Status, 200);
}
All the "AspNetResponse" and "AspNetForm" classes are included with Plasma.
We are currently using an automated build process for our asp.net mvc application.
We use the following tools:
TeamCity
SVN
nUnit
Selenium
We use an msbuild script that runs on a build agent which can be any amount of machines.
The msbuild script gets the latest version of code from svn and builds it.
On success it then deploys the artifacts to a given machine/folder and creates the virtual site in IIS.
We then use MSBuild contrib tasks to run sql scripts to install the database and load data, you could also do a restore.
On success we kick off the nUnit tests. The test setup ensures that selenium is up and running and then drives the selenium tests much in the same way that Watin does. Selenium has a good recorder for tests which can be exported to c#.
The good thing about Selenium is that you can drive FF, Chorme and IE rather than being restricted to IE which was the case with Watin the last time i looked at it. You can also use Selenium to do load testing with the Selenium Grid therefore you can reuse the same tests.
On success msbuild then tags the build in svn. TeamCity has a job that runs overnight that will deploy the latest tag to a staging environment ready for the business users to check the project status the following morning.
In a previous life we had nant & msbuild scripts to fully manage the environment (installing java, selenium etc) however this does take a lot of time so as a pre req we assume each build agent has these installed. In time we will include these tasks.
Why do you need to copy code? Ditch Cassini and let Visual Studio create a virtual directory for you. Sure the devs must remember to build before running web tests if the web app has changed. We have found that this is not a big deal, especially if you run web tests in CI.
Data is a big challenge. As far as I can see, you must choose between imperfect alternatives. Here's how we handle it. First, I should explain that we are working with a large complex legacy WebForms app. Also I should mention that the domain code is not well-suited for creating test data from within the test project.
This left us with a couple of choices. We could: (a) run data setup scripts under the build, or (b) create all data via web tests using the actual web site. The problem with option (a) is that tests become coupled with scripts at a minute level. It makes my head throb to think about synchronizing web test code with T-SQL. So we went with (b).
One benefit of (b) is that your setup also validates application behavior. The problem is...time.
Ideally tests should be independent, without temporal coupling (can run in any order) and not sharing any context (e.g., common test data). The common way to handle this is to set up and tear down data with every test. After some careful thought, we decided to break this rule.
We use Gallio (MbUnit 3), which provides some nice features that support our strategy. First, it lets you specify execution order at the fixture and test level. We have four "setup" fixtures which are ordered -4, -3, -2, -1. These run in the specified order and before all "non setup" fixtures, which by default have an order of 0.
Our web test project depends on the build script for one thing only: a single well-known username/password. This is a coupling I can live with. As the setup tests run they build up a "data context" object that holds identifiers of data (companies, users, vendors, clients, etc.) that is later used (but never changed) throughout other all fixtures. (By identifiers, I don't necessarily mean keys. In most cases our web UI does not expose unique keys. We must navigate the app using names or other proxies for true identifiers. More on this below.)
Gallio also allows you to specify that a test or fixture depends on another test or fixture. When a precedent fails, the dependent is skipped. This reduces the evil of temporal coupling by preventing "cascading failures" which can reap much confusion.
Creating baseline test data once, instead of before each test, speeds things up a lot. However, the setup tests still might take 10 minutes to run. When I'm working on new tests I want to run and rerun them frequently. Enter another cool Gallio feature: Ambience. Ambience is a wrapper around DB4 that provides a very simple way to persist objects. We use it to persist the data context automatically. Thus setup tests must only be run once between rebuilds of the database. After that you can run any or all other fixtures repeatedly.
So what about cleaning up test data? Don't we need to start from a known state? This is a rule we have found it expedient to break. A strategy that is working for us is to use long random values for things like company name, username, etc. We have found that it is not very difficult to keep a test run inside a logical "data space" such that it does not bump into other data. Certainly I fear the day that I spend hours chasing down a phantom failing test only to find that it's some data collision. It's a trade off that is working for us currently.
We are using Watin. I quite like it. Another key to success is something Scott Bellware alluded to. As we create tests we are building up an abstract model of our UI. So instead of this:
browser.TextField("ctl0_tab2_newNote").TypeText("foo");
You will see this in our tests:
User.NotesTab.NewNote.TypeText("foo");
This approach provides three benefits. First, we never repeat a magic string. This greatly reduces brittleness. Second, tests are much easier to read and understand. Last, we hide most of the the Watin framework behind our own abstractions. In the second example, only TypeText is a Watin method. This will make it easier to change as the framework changes.
Hope this helps.
It was difficult, but not impossible, to build an integration test phase into the build process using maven. What happened was essentially this:
Ignore all JUNit tests in a specific directory unless the integration-test phase fires.
Add a maven profile to execute the integration tests.
For the pre-integration test phase -
Start Jetty running the application hitting a test database.
Start the selenium server
Run selenium integration tests in integration test phase
Stop selenium server
Stop selenium
The difficulty in this step was really setting up jetty - we couldn't get it to just launch from a war, so we actually have to have jetty unpack the war, then run the server - but it works, well, and is automated - all you have to do is type mvn -PintegrationTest (that was our integration test profile name) and off it went.
Do you mean automatically starting testing after build finished?
You could write automated scripts to copy the build files to a working IIS while the build complied successfully. And then start the automated BVT by call mstest.exe or other methods.
You could get a try with autoitx or some function language,such as Python,ruby.