We have an ETL DAG which is executed daily. DAG and tasks have the following parameters:
catchup=False
max_active_runs=1
depends_on_past=True
When we add a new task, due to depends_on_past property, no new DAG runs get scheduled, as all previous states for new task are missing.
We would like to avoid having to run manual backfill or manually marking previous runs from UI as it can be easily forgotten, and we also have some dynamic DAGs where tasks get added automatically and halt future DAG executions.
Is there a way to automatically set past executions for new tasks as skipped by default, or some other approach that will allow future DAG runs to execute without human intervention?
We also considered creating a maintenance DAG that would insert missing task executions with skipped state, but would rather not go this route.
Are we missing something as the flow looks like a common thing to do?
Defined in Airflow documentation on BaseOperator:
depends_on_past (bool) – when set to true, task instances will run
sequentially and only if the previous instance has succeeded or has
been skipped. The task instance for the start_date is allowed to run.
As long as there exists a previous instance of the task, if that previous instance is not in the success state, the current instance of the task cannot run.
When adding a task to a DAG with existing dagrun, Airflow will create the missing task instances in the None state for all dagruns. Unfortunately, it is not possible to set the default state of task instances.
I do not believe there is a way to allow future task instances of a DAG with existing dagruns to run without human intervention. Personally, for depends_on_past enabled tasks, I will mark the previous task instance as success either through the CLI or the Airflow UI.
Looks like there is an Github Issue describing exactly what you are experiencing! Feel free to bump this PR or take a stab at it if you would like.
A hacky solution is to set depends_on_past to False as max_active_runs=1 will implicitly guarantee the same behavior. As of the current Airflow version, the scheduler orders both dag runs and task instances by execution date before running them (checked 1.10.x but also 2.0)
Another difference is that next execution will be scheduled even if previous fails. We solved this by retrying unlimited times (setting a ver large number), and alert if retry number is larger than some value.
I have multiple dags that run on different cadence: some weekly, some daily etc. I want it to setup such that while dag-a is running, dag-b should wait until it is completed. Also, if dag-b is running dag-a should wait until dag-b completes, etc. Is there a way to do this in airflow out of the box?
What you are looking for is probably the ExternalTaskSensor
Airflow's Cross-DAG Dependencies description is also pretty useful.
If you are using this, there is also the Airflow DAG dependencies plugin, which can be pretty useful for visualizating those dependencies.
You could use the sensor operator to sense the dag runs or a task in a dag run. External task sensor is the best bet. Be careful how you set the timedelta passed. In general, the idea is to specify the when should the sensor be able to find the dag run.
Eg:
If the main dag is scheduled at 4 UTC, and a task sensor is a task in the dag like below
ExternalTaskSensor(
dag=dag,
task_id='dag_sensor_{}'.format(key),
external_dag_id=key,
timedelta=timedelta(days=1),
external_task_id=None,
mode='reschedule',
check_existence=True
)
Then the other dag that should get sensed must be triggering a run at 4.00UTC. That one day difference is set to offset the difference of execution date and current date
Is there a way specify that a task can only run once concurrently? So in the tree above where DAG concurrency is 4, Airflow will start task 4 instead of a second instance of task 2?
This DAG is a little special because there is no order between the tasks. These tasks are independent but related in purpose and therefore kept in one DAG so as to new create an excessive number of single task DAGs.
max_active_runs is 2 and dag_concurrency is 4. I would like it start all 4 tasks and only start a task in next if same task in previous run is done.
I may have mis-understood your question, but I believe you are wanting to have all the tasks in a single dagrun finish before the tasks begin in the next dagrun. So a DAG will only execute once the previous execution is complete.
If that is the case, you can make use of the max_active_runs parameter of the dag to limit how many running concurrent instances of a DAG there are allowed to be.
More information here (refer to the last dotpoint): https://airflow.apache.org/faq.html#why-isn-t-my-task-getting-scheduled
max_active_runs defines how many running concurrent instances of a DAG there are allowed to be.
Airflow operator documentation describes argument task_concurrency. Just set it to one.
From the official docs for trigger rules:
depends_on_past (boolean) when set to True, keeps a task from getting triggered if the previous schedule for the task hasn’t succeeded.
So the future DAGs will wait for the previous ones to finish successfully before executing.
On airflow.cfg under [core]. You will find
dag_concurrency = 16
//The number of task instances allowed to run concurrently by the scheduler
you're free to change this to what you desire.
I'm very confused by how airflow picks up the changes in new DAG code with the scheduler.
Can someone clarify how the airflow scheduler works with new code? Do I need to stop and rerun airflow scheduler every time I change code in DAGs? or can I just set --num_runs 1and run it every time I make new changes?
Thanks!
The scheduler should be running all the time. You should just run airflow scheduler without a num_runs param. The scheduler is designed to be a long running process, an infinite loop. It orchestrates the work that is being done, it is the heart of airflow. If it's not running, you aren't scheduling more work to be done.
Each iteration of the loop will reload what is called the DagBag, a collection of loaded DAGs. Any modifications to a DAG, as well as removal/addition of DAGs should be reflected the next scheduler loop.
Airflow's scheduler checks periodically and continuously the DAGs location to scan and refresh DAGs. If you didn't change the config, it's done with just few seconds of pause between each round.
The --num_run parameter was not introduced for refreshing purposes but for reliability:
Airflow officially advises here that the scheduler should be restarted frequently using the num_runs and/or the run_duration configuration parameters.
Airflow is randomly not running queued tasks some tasks dont even get queued status. I keep seeing below in the scheduler logs
[2018-02-28 02:24:58,780] {jobs.py:1077} INFO - No tasks to consider for execution.
I do see tasks in database that either have no status or queued status but they never get started.
The airflow setup is running https://github.com/puckel/docker-airflow on ECS with Redis. There are 4 scheduler threads and 4 Celery worker tasks. For the tasks that are not running are showing in queued state (grey icon) when hovering over the task icon operator is null and task details says:
All dependencies are met but the task instance is not running. In most cases this just means that the task will probably be scheduled soon unless:- The scheduler is down or under heavy load
Metrics on scheduler do not show heavy load. The dag is very simple with 2 independent tasks only dependent on last run. There are also tasks in the same dag that are stuck with no status (white icon).
Interesting thing to notice is when I restart the scheduler tasks change to running state.
Airflow can be a bit tricky to setup.
Do you have the airflow scheduler running?
Do you have the airflow webserver running?
Have you checked that all DAGs you want to run are set to On in the web ui?
Do all the DAGs you want to run have a start date which is in the past?
Do all the DAGs you want to run have a proper schedule which is shown in the web ui?
If nothing else works, you can use the web ui to click on the dag, then on Graph View. Now select the first task and click on Task Instance. In the paragraph Task Instance Details you will see why a DAG is waiting or not running.
I've had for instance a DAG which was wrongly set to depends_on_past: True which forbid the current instance to start correctly.
Also a great resource directly in the docs, which has a few more hints: Why isn't my task getting scheduled?.
I'm running a fork of the puckel/docker-airflow repo as well, mostly on Airflow 1.8 for about a year with 10M+ task instances. I think the issue persists in 1.9, but I'm not positive.
For whatever reason, there seems to be a long-standing issue with the Airflow scheduler where performance degrades over time. I've reviewed the scheduler code, but I'm still unclear on what exactly happens differently on a fresh start to kick it back into scheduling normally. One major difference is that scheduled and queued task states are rebuilt.
Scheduler Basics in the Airflow wiki provides a concise reference on how the scheduler works and its various states.
Most people solve the scheduler diminishing throughput problem by restarting the scheduler regularly. I've found success at a 1-hour interval personally, but have seen as frequently as every 5-10 minutes used too. Your task volume, task duration, and parallelism settings are worth considering when experimenting with a restart interval.
For more info see:
Airflow: Tips, Tricks, and Pitfalls (section "The scheduler should be restarted frequently")
Bug 1286825 - Airflow scheduler stopped working silently
Airflow at WePay (section "Restart everything when deploying DAG changes.")
This used to be addressed by restarting every X runs using the SCHEDULER_RUNS config setting, although that setting was recently removed from the default systemd scripts.
You might also consider posting to the Airflow dev mailing list. I know this has been discussed there a few times and one of the core contributors may be able to provide additional context.
Related Questions
Airflow tasks get stuck at "queued" status and never gets running (especially see Bolke's answer here)
Jobs not executing via Airflow that runs celery with RabbitMQ
Make sure you don't have datetime.now() as your start_date
It's intuitive to think that if you tell your DAG to start "now" that it'll execute "now." BUT, that doesn't take into account how Airflow itself actually reads datetime.now().
For a DAG to be executed, the start_date must be a time in the past, otherwise Airflow will assume that it's not yet ready to execute. When Airflow evaluates your DAG file, it interprets datetime.now() as the current timestamp (i.e. NOT a time in the past) and decides that it's not ready to run. Since this will happen every time Airflow heartbeats (evaluates your DAG) every 5-10 seconds, it'll never run.
To properly trigger your DAG to run, make sure to insert a fixed time in the past (e.g. datetime(2019,1,1)) and set catchup=False (unless you're looking to run a backfill).
By design, an Airflow DAG will execute at the completion of its schedule_interval
That means one schedule_interval AFTER the start date. An hourly DAG, for example, will execute its 2pm run when the clock strikes 3pm. The reasoning here is that Airflow can't ensure that all data corresponding to the 2pm interval is present until the end of that hourly interval.
This is a peculiar aspect to Airflow, but an important one to remember - especially if you're using default variables and macros.
Time in Airflow is in UTC by default
This shouldn't come as a surprise given that the rest of your databases and APIs most likely also adhere to this format, but it's worth clarifying.
Full article and source here
I also had a similar issue, but it is mostly related to SubDagOperator with more than 3000 task instances in total (30 tasks * 44 subdag tasks).
What I found out is that airflow scheduler mainly responsible for putting your scheduled tasks in to "Queued Slots" (pool), while airflow celery workers is the one who pick up your queued task and put it into the "Used Slots" (pool) and run it.
Based on your description, your scheduler should work fine. I suggest you check your "celery workers" log to see whether there is any error, or restart it to see whether it helps or not. I experienced some issues that celery workers normally go on strike for a few minutes then start working again (especially on SubDagOperator)
One of the very silly reasons could be that the DAG is "paused" which is the default state for the first time. I lost around 2 hrs fighting it. If you are using Airflow Web interface, then this shows up as a toggle next to your DAG in the list
I am facing the issue today and found that bullet point 4 from tobi6 answer below worked out and resolved the issue
*'Do all the DAGs you want to run have a start date which is in the past?'*
I am using airflow version v1.10.3
My problem was one step further, in addition to my tasks being queued, I couldn't see any of my celery workers on the Flower UI. The solution was that, since I was running my celery worker as root I had to make changes in my ~/.bashrc file.
The following steps made it work:
Add export C_FORCE_ROOT=true to your ~/.bashrc file
source ~/.bashrc
Run worker : nohup airflow worker $* >> ~/airflow/logs/worker.logs &
Check your Flower UI at http://{HOST}:5555
I think it's worth mentioning that there's an open issue that can cause tasks to fail to run with no obvious reason: https://issues.apache.org/jira/browse/AIRFLOW-5506
The problem seems to occur when using LocalScheduler connected to a PostgreSQL airflow db, and results in the scheduler logging a number of "Killing PID xxxx" lines. Check the scheduler logs after the DAGs have been stalled without starting any new tasks for a while.
You can try to stop the webserver and the scheduler:
ps -ef | grep airflow #show the process id
kill 1234 #kill the webserver
kill 5678 #kill the scheduler
Remove the files from the airflow folder if they exist (they will be created again):
airflow-scheduler.err
airflow-scheduler.pid
airflow-webserver.err
airflow-webserver.pid
Start the webserver and the scheduler again.
airflow webserver -D
airflow scheduler -D
-D will make the services run in the background.
I had a similar issue of a triggered DAG "running" indefinitely because its first task stuck in "queued" state.
I realized this was because of a "ghost" DAG that actually changed name. It seems that since the DAG has run in the past (had data in the postgresDG) and was referenced as child-DAG in other DAGs, the trigger of the parent DAGs referencing the old name would "resurrect" the old DAG name, but with the new code. Indeed the old DAG name and new DAG code did not match, thus producing an "infinite queued execution" bug.
Solution:
Delete the all the previous DAG runs of the previous DAG-runs with the old name
Restart everything (webserver, worker, executor,...) OR Delete relevant DAGs (with the "delete DAG" button in the UI).
The interpretation of the bug can vary but this fix worked in my case.
One more thing to check is whether "the concurrency parameter of your DAG reached?".
I'd experienced the same situation when some task was shown as NO STATUS.
It turned out that my File_Sensor tasks were run with timeout set up to 1 week, while DAG time out was only 5 hours. That leaded to the case when the Files were missing, many sensors tasked were running at the same time. Which results the concurrency overloaded!
The depending tasks couldn't be started before the sensor task succeed, when the dag timeout, they got NO STATUS.
My solution:
Carefully set tasks and DAG timeout
Increase dag_concurrency in airflow.cfg file in AIRFLOW_HOME folder.
Please refer to the docs.
https://airflow.apache.org/faq.html#why-isn-t-my-task-getting-scheduled
I believe this is an issue with celery version 4.2.1 and redis 3.0.1 as described here:
https://github.com/celery/celery/issues/3808
we resolved the issue by downgrading our redis version 2.10.6:
redis==2.10.6
In my case, tasks were not being launched because I had for all operators a pool configured and hadn't created it, hence, tasks were not even scheduled. An operator looks like:
foo = DummyOperator(
task_id='foo',
dag=dag,
pool='capser'
)
To create a pool go to Admin > Pools > Create and set slots, for example, 128, which runs successfully for me. You can also configure by using the CLI.
counter intuitive UI message!
I have spent days on this. So want to elaborate on my specific issue (s).
Each dag has a state. By default the state could be 'pause' or 'not pause'.
The first confusion arises from - what is the default state on startup? The UI message attached seems to indicate that the state is 'not pause' and on clicking the toggle, it pauses.
In reality, the default state is 'pause'. This state can be controlled by settings, environment variables, parameters and UI. I have detailed them below.
The second confusion arises because of the UI again. When we manually trigger a dag which is in the pause state. The UI shows the dag as running (green circle)! But the dag is actually in the 'pause' state. The tasks will not execute unless it is 'un-paused'.
If we read the task instance details. The message would be
Task is in the 'None' state which is not a valid state for execution. The task must be cleared in order to be run.
What is the 'None' state!? And clear which task?!
The actual problem is that the dag is in the pause state. On toggling the dag state the tasks would start to execute.
The pause state of the dag can be changed by
clicking the button on the UI.
set your particular dag to run, by adding the below parameter to your dag
DAG(dag_id='your-dag', is_paused_upon_creation=True)
setting the config variable in airflow.cfg file. (caution: this will start all your dags including the example ones)
dags_are_paused_at_creation = FALSE
configuring an environment variable before starting up the scheduler/webserver.(caution: this will start all your dags including the example ones)
AIRFLOW__CORE__DAGS_ARE_PAUSED_AT_CREATION=False
Make sure that your task is assigned to the same queue, that your workers is listening to. This means that in your DAG file you have to set 'queue': 'queue_name' and in your worker configuration you have to set either default_queue = 'queue_name' in the airflow.cfg or AIRFLOW__OPERATORS__DEFAULT_QUEUE: 'queue_name' in the docker-compose.yaml (in case you're using Docker).