I need to generate a file for Excel, some of the values in this file contain multiple lines.
there's also non-English text in there, so the file has to be Unicode.
The file I'm generating now looks like this: (in UTF8, with non English text mixed in and with a lot of lines)
Header1,Header2,Header3
Value1,Value2,"Value3 Line1
Value3 Line2"
Note the multi-line value is enclosed in double quotes, with a normal everyday newline in it.
According to what I found on the web this supposed to work, but it doesn't, at least not win Excel 2007 and UTF8 files, Excel treats the 3rd line as the second row of data not as the second line of the first data row.
This has to run on my customer's machines and I have no control over their version of Excel, so I need a solution that will work with Excel 2000 and later.
Thanks
EDIT: I "solved" my problem by having two CSV options, one for Excel (Unicode, tab separated, no newlines in fields) and one for the rest of the world (UTF8, standard CSV).
Not what I was looking for but at least it works (so far)
You should have space characters at the start of fields ONLY where the space characters are part of the data. Excel will not strip off leading spaces. You will get unwanted spaces in your headings and data fields. Worse, the " that should be "protecting" that line-break in the third column will be ignored because it is not at the start of the field.
If you have non-ASCII characters (encoded in UTF-8) in the file, you should have a UTF-8 BOM (3 bytes, hex EF BB BF) at the start of the file. Otherwise Excel will interpret the data according to your locale's default encoding (e.g. cp1252) instead of utf-8, and your non-ASCII characters will be trashed.
Following comments apply to Excel 2003, 2007 and 2013; not tested on Excel 2000
If you open the file by double-clicking on its name in Windows Explorer, everything works OK.
If you open it from within Excel, the results vary:
You have only ASCII characters in the file (and no BOM): works.
You have non-ASCII characters (encoded in UTF-8) in the file, with a UTF-8 BOM at the start: it recognises that your data is encoded in UTF-8 but it ignores the csv extension and drops you into the Text Import not-a-Wizard, unfortunately with the result that you get the line-break problem.
Options include:
Train the users not to open the files from within Excel :-(
Consider writing an XLS file directly ... there are packages/libraries available for doing that in Python/Perl/PHP/.NET/etc
After lots of tweaking, here's a configuration that works generating files on Linux, reading on Windows+Excel, though the embedded newline format is not according to the standard:
Newlines within a field need to be \n (and obviously quoted in double quotes)
End of record: \r\n
Make sure that you don't start a field with equals, otherwise it gets treated as a formula and truncated
In Perl, I used Text::CSV to do this as follows:
use Text::CSV;
open my $FO, ">:encoding(utf8)", $filename or die "Cannot create $filename: $!";
my $csv = Text::CSV->new({ binary => 1, eol => "\r\n" });
#for each row...:
$csv -> print ($FO, \#row);
Recently I had similar problem, I solved it by importing a HTML file, the baseline example would be like this:
<html xmlns:v="urn:schemas-microsoft-com:vml"
xmlns:o="urn:schemas-microsoft-com:office:office"
xmlns:x="urn:schemas-microsoft-com:office:excel"
xmlns="http://www.w3.org/TR/REC-html40">
<head>
<style>
<!--
br {mso-data-placement:same-cell;}
-->
</style>
</head>
<body>
<table>
<tr>
<td>first line<br/>second line</td>
<td style="white-space:normal">first line<br/>second line</td>
</tr>
</table>
</body>
</html>
I know, it is not a CSV, and might work differently for various versions of Excel, but I think it is worth a try.
I hope this helps ;-)
In Excel 365 while importing the file:
Data -> From Text/CSV:
-> Select File > Transform Data:
In the Power Query Editor, right hand side at "Query Settings", under APPLIED STEPS, on "Source" row, click the "Settings icon"
-> In the line break dropdown select Ignore line breaks inside quotes.
Then press OK -> File -> Close & Load
It is worth noting that when a .CSV file has fields wrapped in double quotes which contain line breaks, Excel will not import the .CSV file properly if the .CSV file is written in UTF-8 format. Excel treats the line break as if it were CR/LF and begins a new line. The spreadsheet is garbled. That seems to be true even if semi-colons are used as field delimiters (instead of commas).
The problem can be resolved by using Windows Notepad to edit the .CSV file, using File > Save As... to save the file, and before saving the file, changing the file encoding from UTF-8 to ANSI. Once the file is saved in ANSI format, then I find that Microsoft Excel 2013 running on Windows 7 Professional will import the file properly.
Newline inside a value seems to work if you use semicolon as separator, instead of comma or tab, and use quotes.
This works for me in both Excel 2010 and Excel 2000. However, surprisingly, it works only when you open the file as a new spreadsheet, not when you import it into an existing spreadsheet using the data import feature.
On a PC, ASCII character #10 is what you want to place a newline within a value.
Once you get it into Excel, however, you need to make sure word wrap is turned on for the multi-line cells or the newline will appear as a square box.
This will not work if you try to import the file into EXCEL.
Associate the file extension csv with EXCEL.EXE so you will be able to invoke EXCEL by double-clicking the csv file.
Here I place some text followed by the NewLine Char followed by some more text AND enclosing the whole string with double quotes.
Do not use a CR since EXCEL will place part of the string in the next cell.
""text" + NL + "text""
When you invoke EXCEL, you will see this. You may have to auto size the height to see it all. Where the line breaks will depend on the width of the cell.
2
DATE
Here's the code in Basic
CHR$(34,"2", 10,"DATE", 34)
I found this and it has worked for me
$delimiter = ',';
$enc1 = '"';
$enc2 = '""';
Then where you need to have stuff enclosed
$myfile = ('/path/to/myfile.csv');
//erase any previous contents
$fp = fopen($myfile, 'w+');
fwrite($fp, $enc1 . 'Column Heading 1' . $enc1 . $delimiter );
//append to new file
$fp2 = fopen($myfile, 'a');
fwrite($fp2, $enc1 . 'Column Heading 2' . $enc1 . $delimiter );
.....
fwrite($fp2, $enc1 . 'Last Column Heading' . $enc1 . $delimiter. PHP_EOL );
Then when you need to write something out - like HTML that includes the " you can do this
fwrite($fp2, $enc2 . $myhtmlstring . $enc2 . $delimiter);
New lines end with . PHP_EOL
The end of the script prints out a link so that the user can download the file.
echo 'Click here to download file';
Test this:
It fully works for me:
Put the following lines in a xxxx.csv file
hola_x,="este es mi text1"&CHAR(10)&"I sigo escribiendo",hola_a
hola_y,="este es mi text2"&CHAR(10)&"I sigo escribiendo",hola_b
hola_z,="este es mi text3"&CHAR(10)&"I sigo escribiendo",hola_c
Open with excel.
in some cases will open directly otherwise will need to use column to data conversion.
expand the column width and hit the wrap text button. or format cells and activate wrap text.
and thanks for the other suggestions, but they did not work for me. I am in a pure windows env, and did not want to play with unicode or other funny thing.
This way you putting a formula from csv to excel. It may be many uses for this method of work.
(note the = before the quotes)
pd:In your suggestions please put some samples of the data not only the code.
UTF files that contain a BOM will cause Excel to treat new lines literally even in that field is surrounded by quotes. (Tested Excel 2008 Mac)
The solution is to make any new lines a carriage return (CHR 13) rather than a line feed.
putting "\r" at the end of each row actually had the effect of line breaks in excel, but in the .csv it vanished and left an ugly mess where each row was squashed against the next with no space and no line-breaks
For File Open only, the syntax is
,"one\n
two",...
The critical thing is that there is no space after the first ",". Normally spaces are fine, and trimmed if the string is not quoted. But otherwise nasty. Took me a while to figure that out.
It does not seem to matter if the line is ended \n or \c\n.
Make sure you expand the formula bar so you can actually see the text in the cell (got me after a long day...)
Now of course, File Open will not support UTF-8 Properly (unless one uses tricks).
Excel > Data > Get External Data > From Text
Can be set into UTF-8 mode (it is way down the list of fonts). However, in that case the new lines do not seem to work and I know no way to fix that.
(One might thing that after 30 years MS would get this stuff right.)
The way we do it (we use VB.Net) is to enclose the text with new lines in Chr(34) which is the char representing the double quotes and replace all CR-LF characters for LF.
Normally a new line is "\r\n". In my CSV, I replaced "\r" with empty value.
Here is code in Javascript:
cellValue = cellValue.replace(/\r/g, "")
When I open the CSV in MS Excel, it worked well. If a value has multiple lines, it will stay within 1 single cell in the Excel sheet.
you can do the next "\"Value3 Line1 Value3 Line2\"". It works for me generating a csv file in java
Here is an interesting approach using JavaScript ...
String.prototype.csv = String.prototype.split.partial(/,\s*/);
var results = ("Mugan, Jin, Fuu").csv();
console.log(results[0]=="Mugan" &&
results[1]=="Jin" &&
results[2]=="Fuu",
"The text values were split properly");
Printing a HTML newline <br/> into the content and opening in excel will work fine on any excel
You could use keyboard shortcut ALT+Enter.
Select the cell you wish to edit
enter edit mode either by double clicking it or pressing F2
3.Press Alt+enter. This will create a new line in cell
How to combine two text files in to a single text file in Scilab? I'm using the following code to write a text file.
filename = fullfile("filepath");
csvWrite(M,filename,ascii(9),".",4);
mgetl(filename);
One text file contain text lines while the other one contain string values. Please help me combining the two so that the text lines comes above the column string values
I am not sure to understand exactly what you want to do.If you want to catenate two ascii files (not binary) you can proceed as follow.
mputl([mgetl("file1");mgetl("file2")], "file12")
If you want to form a text file from a text file and a binary file
You have to first read the text file
t1=mgetl("file1")
Then read the data of the binary file using the mopen, mget and mclose functions. But you must know how the data are stored in the file (integer, double, ...)
Then you have to format your data as you wish, using the string or msprintf function
to form the t2 array of strings
and finally write [t1;t2];
I see many people convert text to unix file. Is there some way to do the opposite, unix executable file to .txt?
(I need to read unix executable files under mac os. If it is impossible to convert the file, is there a way I can read them? UnicodeDecodeError: 'utf-8' codec can't decode byte 0xa0 in position 468: invalid start byte
)
I have noticed that nano seems to convert to text automatically, although I want to be able to view it in a text editor, so I am still trying to find another way.
If you are trying to read the file in Python, you need to append 'b' to the mode in order to avoid newline replacement.
I want to convert MathType equation saved as GIF format to MathML. Firstly, I opened these GIF files and saved them within MathType 6.7. As a result, MathML text is inserted into the end of GIF files. However, when I extracted MathML text from these GIF files using Perl script, I found some garbled characters in the MathML text as following text:
<mn>xxx</mn>
In the above line, a garbled character is inserted before 'mn' label. Is this MathType 's BUG? How can I work around this problem? I have uploaded my test GIF files. URL is: http://ubuntuone.com/p/1352/
Update:
I have tried to paste full block of MathML here, but I found the syntax format of MathML text was messed. So I pasted the MathML on GitHub: https://gist.github.com/1068723.
There is a garbled character in the seventh line of MathML text: " ?#x00A0;".
The original GIF file which doesn't contain MathML text: http://ubuntuone.com/p/13Ba/
Perl script that extracts MathML from GIF image generated by MathType: https://gist.github.com/1068749
Thanks,
thinkhy
Thanks thinkhy. It could be you extracting the data incorrectly (we haven't looked at your script yet). Only one of your GIFs had MathML -- the one that has a file name starting 106R. In that one, if you just grab all the bytes from the first bit that looks like MathML until the end, you do periodically get odd bytes in there, mostly 255's except the last one. (This however doesn't appear to be the junk character you're seeing.) The reason for the 255's is that the MathML is distributed over multiple comment records, each one of which starts with a count of the bytes in the record. From the MathType SDK (free download; link below):
GIF Image Files
MathML text is embedded into a GIF file as an Application Extension Record, which consists of a 14-byte header (Application Extension Descriptor), followed by the MTEF data. The header contains:
Byte Introducer = 0x21;
Byte ExtensionLabel = 0xFF;
Byte BlockSize = 0x0B;
Byte ApplicationId[8] = "MathType";
Byte AuthenticationCode[3] = "003";
The data follows this header and is written as a series of blocks each containing 255 bytes or less. Each block starts with a single byte count followed by the data. The end is marked as a block with length 0.
The header is unique enough that the easiest way to extract the data might be to scan the file for the 14-byte header, then expect the MathML data blocks to follow. Properly decoding the GIF records isn't that hard either, but obviously requires you read the GIF specification.
You may already be using the SDK, but you didn't say whether you were or not, so here's the link: http://www.dessci.com/en/reference/sdk/.
I've got a program that in a nutshell reads values from a SQL database and writes them to a tab-delimited text file.
The issue is that some of the values in the database have special characters (TM, dash, ellipsis, etc.) When written to the text file, the formatting is lost and they come across as junk "™ or – etc"
When the value is viewed in the immediate window, before it is written to the txt file, everything looks fine. My guess is that this is an issue of encoding. But, I'm not real sure how to proceed, where to look, or what to look for.
Is this ASCII or UTF-8? If it's one of those how do I correct it before it's written to the text file.
Here's how I build the text file (where feedStr is a StringBuilder)
objReader = New StreamWriter(filePath)
objReader.Write(feedStr)
objReader.Close()
The default encoding for StreamWriter is UTF8 (with no byte order mark). Your result file is ok, the question is what do you open it in afterwards? If you open it in a UTF8 capable text editor, the characters should look the way you want.
You can also write the text file in another encoding, for example iso-8859-1 (latin1)
objReader = New StreamWriter(filePath, false, Encoding.GetEncoding("iso-8859-1"))