I can't find a way to search for TCPs / search TCP usages / renaming all TCPs.
Let's assume I have a 'licensePlate' TCP set up on the highest level of the hierarchy, and that I have 2 subfolders. In one of them I use the value as it is, in the other folder I change the value. I have some libraries using 'licensePlate'.
I then proceed to rename the TCP to 'carId' on the highest level (and in the libraries). The folder which inherited it will be updated. But the other one will now have two TCPs. This is illustrated in the figure below.
So at the moment I need to manually go into all my subfolders/testcases, find all of them where 'licensePlate' was re-configured, and: (1) set the value to the new param ('carId'); (2) delete the old param ('licensePlate').
The logic behind this imho is that I may still be using that param name (e.g. if I resolved my libraries). Still, I'm guessing that there must be a way to bulk-rename or at least to search for TCP usages (?)
That is really tricky and abstruse. You can find TCP usage with following TQL (Home - Search - TQL Search tab)
=>SUBPARTS[(param_name!="")]
where "param_name" is the name of your parameter.
And it seems that only usages are being found where values has been changed and are not default values.
Related
I am trying to figure out how I can simply remove a portion of a filename on a transfer. I need the numbers to remain unchanged with 'check-aft' buttressing up against them as a prefix.
Source: check-aft-eft-12345678-0001
Destination: check-aft12345678-0001
I cannot for the life of me figure out how to either use the Find and Replace feature which BMC mentions, but then provides zero guidance for, or how I would utilize the variables to do so. I have review all of their documentation and watched so many videos, but they do not cover this scenario.
I would appreciate any help getting '-eft-' removed from this filename.
I have tried creating variables for '-eft-' and for 'check-aft' but I am unable to figure out how i can tell it to look for 'check-aft-eft-' and remove '-eft-'
Find & Replace is used for making bulk changes to job definitions, it has no direct relation to AFT jobs (unless you are changing the AFT job defs, that is).
The AFT jobs have many useful features hidden away on the "Advanced" button. If you literally want to change the file name, click Advanced and go to "Destination Actions" on the General tab. Here select "Renamed" where it says "After the completion of a successful file transfer the destination file will be:" and enter check-aft12345678-0001.
If, however, the numbers can be any value - go to the "File Watcher" tab (still in the "Advanced" pop-up) and use "Output / Variable containing detected file name". Set it to something like found_aft_file_1.
You now have a variable that you can do SUBSTR on -
%%PARTONE = %%SUBSTR %%found_aft_file_1 1 10
%%PARTTWO = %%SUBSTR %%found_aft_file_1 15 13
Then %%PARTONE.%%PARTTWO will return the required value.
I changed Change in persistence.xml
I also changed column definition (columnDefinition="XDB.XMLType") for xml fields
I checked OpenJpa(http://openjpa.208410.n2.nabble.com/Oracle-XMLType-fetch-problems-td6208344.html) site and IBM (http://www.ibm.com/support/knowledgecenter/SS7J6S_7.5.0/com.ibm.wsadapters.jca.jdbc.doc/env/doc/rjdb_problemsolutions.html)
My env is OpenJpa 2.0 and WAS 7
its throwing exception
org.apache.openjpa.persistence.PersistenceException: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "SYS.XMLTYPE", line 169
Please suggest without changing OpenJpa2.0 as its part of IBM WebSphere Application Server V7.0 how can i handle sys.XMLTYPE data, i am migrating my application from db2 to Oracle in same environment.
Writing XML data can be tricky some times! Getting the correct drivers and things defined properly can have its challenges. I can not say exactly what you need to do given the lack of info on your domain model and such, but let me give some general things to look for. First, there is an XML test in the OpenJPA test framework if you want to make reference to it. It can be seen publicly here:
https://apache.googlesource.com/openjpa/+/refs/heads/trunk/openjpa-persistence-jdbc/src/test/java/org/apache/openjpa/jdbc/oracle/
Or, another test using an "XMLValueHandler" (likely this is beyond the scope of what you are looking for):
https://apache.googlesource.com/openjpa/+/refs/heads/trunk/openjpa-persistence-jdbc/src/test/java/org/apache/openjpa/persistence/xmlmapping/query/
Second, (stating the obvious) I assume you have a column in Oracle defined as "XMLTYPE". Also, I see you are using schema SYS. I'm sure you are aware but this is a system/admin schema......just for sanity sake you might want to first get things running using a non-system/admin schema just so we don't get hung up with any issues with your OpenJPA client not having the correct permissions.
Next, you need the following definition:
#Lob #Basic
#Column(name = "ANXMLCOLUMN", columnDefinition="XMLCOLUMN XMLType")
private String anXMLString;
The #Lob I think will be necessary if you are using data greater than 4000 chars (this was mentioned in one of the comments). To start I'd use a very small set of data (a couple characters), once that works, then experiment with > 4k.
Next, make sure to use the correct JDBC driver. The last time I experimented with an XMLType I used the Oracle JDBC 11.2.0.2 driver.
Finally, you might need to use the property "openjpa.jdbc.DBDictionary" with value "oracle(supportsSetClob=true,maxEmbeddedClobSize=-1)". Again, experiment with this AND look at the OpenJPA documentation on these properties to determine if they are necessary in your scenario. I think the supportsSetClob=true will only be necessary for older version (pre-2.2.x) of OpenJPA. You might also need to use property "openjpa.jdbc.SchemaFactory" with value "native". I would suggest you first try without either or these two properties. If that doesn't help, then experiment with these two properties. I know this is vague, but I don't know what your DDL or domain model looks like so I have to keep in vague.
Thanks,
Heath Thomann
See, I have a requirement in which I am supposed to change the "Auto Number Prefix" for only one profile, I am wondering if there is any way to achieve that?
You should be able to set AutoNumberPrefix in a rule side effect and have it apply only to that rule/profile.
<$AutoNumberPrefix="profile1_"$>
For those who wants the answer for this, I found the method to provide the different prefix for different profile type. Go in Admin Server-> Configuration -> Paste this code;
AutoNumberPrefix=<$if dDocType like 'Profile_name'$>Prefix Name<$else$>another prefix name<$endif$>
Adding the code shown as "correct" is actually the more inflexible way to do this. Any changes require a restart of the Content Server.
Jonathan's answer was really close, but the syntax used ensures that the variable "AutoNumberPrefix" remains in the profile context. It needs to be placed into local data to be used. This is accomplished using the function "dpPromote".
<$dpPromote("AutoNumberPrefix","profile1_")$>
The main Data Type used by Yahoo Pipes is the [Item], which is RSS feed content. I want to take an RSS's content or sub-element, make it into [Text] (or a number might work), and then use it as an INPUT into a [Module] to build a RSS-URL with specific parameters. I will then use the new RSS-URL to pull more content.
Could possibly use the [URL Builder Module] or some work-around.
The key here is using "dynamic" data from an RSS feed (not user input, or a static data), and getting that data into a Data Type that is compatible (and/or accessible) as an INPUT into a module.
It seems like a vital functionality, but I cannot figure it out. I have tried many, many work-around attempts, with no success.
The Specific API and Methods (if you are interested)
Using the LastFM API.
1st Method: user.getWeeklyChartList. Then pick the "from" (start) and "to" (end) Unix timestamps from 1 year-ago-today.
2nd Method: user.getWeeklyAlbumChart using those specific (and "dynamic") timestamps to pull my top albums for that week.
tl;dr. Build an RSS-URL using specific parameters from another RSS feed's content.
I think I may have figured it out. I doubt it is the best way, but it works. The problem was the module I needed to use didn't have and input node. But the Loop module has an input node, so if I embed the URL builder into the Loop module I can then access sub-element content from the 1st feed to use as parameters to build the URL for the 2nd feed! Then I can just scrap all the extra stuff generated by the Loop, by using Truncate.
When I am publishing my page from tridio 2009, I am getting the error below:
Destination with name 'FTP=[Host=servername, Location=\RET, Password=******, Port=21, UserName=retftp]' reported the following failure:
A processing error occurred processing a transport package Attempting to deploy a binary [Binary id=tcm:553-974947-16 variantId= sg= path=/Images/image_thumbnail01.jpg] to a location where a different binary is already stored Existing binary: tcd:pub[553]/binarymeta[974950]
Below is my code snippet
Component bigImageComp = th.GetComponentValue("bigimage", imageMetaFields);
string bigImagefileName = string.Empty;
string bigImagePath = string.Empty;
bigImagefileName = bigImageComp.BinaryContent.Filename;
bigImagePath = m_Engine.AddBinary(bigImageComp.Id, TcmUri.UriNull, null, bigImageComp.BinaryContent.GetByteArray(), Path.GetFileName(bigImagefileName));
imageBigNode.InnerText = bigImagePath;
Please suggest
Chris Summers addressed this on his blog. Have a read of the article - http://www.urbancherry.net/blogengine/post/2010/02/09/Unique-binary-filenames-for-SDL-Tridion-Multimedia-Components.aspx
Generally in Tridion Content Delivery we can only keep one version of a Component. To get multiple "versions" of a MMC we have to publish MMC as variants. By this way we can produce as many variants as we need via templating.
You can refer below article for more detail:
http://yatb.mitza.net/2012/03/publishing-images-as-variants.html#!/2012/03/publishing-images-as-variants.html
When adding binaries you must ensure that the file and it's metadata is unique. If one of the values e.g. the filename appears to be the same but the rest of the metadata does not match, then deployment will fail.
In the given example (as Nuno points out) the binary 910 is trying to deploy over binary 703. The filename is the same but the binary is identified to be not the same (in the case a different ID from the same publication). For this example you will need to rename one of the binaries (either the file itself or change the path) and everything will be fine.
Other scenarios can be that the same image is used from two different templates and the template id is used as the varient ID. If this is the case it is the same image BUT the varient ID check fails so to avoid overwriting the same image the deployer fails it.
Often unpublishing can help, however, the image is only removed when ALL references to it are removed. So if it is used from more than one place there are more open references.
This is logical protection from the deployer. You would not want the wrong image replacing another and either upsetting the layout or potentially changing the content to another meeting (think advertising banner).
This is actual cause and reason for above problem (Something got from forum)