I am trying to use the R extension in Netlogo 6.2.
I just cannot find the user.properties file anywhere.
I have Windows 7. According to instructions:
I installed Microsoft Visual C++ 2013
I configured the Windows PATH adding C:\Program Files\R\R-\bin\x64\ after a semicolon
I reinstalled Java to the latest version
I installed java packages and loaded the library in the R session that I am running in R Studio, using the following console commands: install.packages("rJava") and library(rJava)
I added the "extensions [ r ]" line at the top of the code in Netlogo
Now: I am getting Error 01 for lack of configuration of the user-properties file.
("LALC" is my username).
So I am looking for the user.properties file into
C:\Users\LALC\AppData\Roaming\NetLogo\6.2\r
and there is nothing in there!
Where is the user.properties file?
There is also nothing in the extensions folder.
I don't understand if I should create the user.properties file myself, and if yes, what should I write in it?
(FYI I am running Windows 7 on a Mac, using Bootcamp, but I don't think this should be an issue, correct?)
I believe I solved the problem.
As discussed, after all the installation steps, the user.properties file was missing in
C:\Users\username\AppData\Roaming\NetLogo\6.2\r
I found it in a completely different folder which is
C:\Program Files\NetLogo 6.2.0\app\extensions.bundled\r
I copied it from there and pasted it in
C:\Users\username\AppData\Roaming\NetLogo\6.2\r
This is not mentioned at all in the Netlogo instructions document at
https://ccl.northwestern.edu/netlogo/docs/r.html
and I think it should be clarified.
Anyway, now with the user.properties file in the correct location, after editing it with the correct location paths for r.home and jri.home in the Windows section (asking for those paths in R, as per instructions), and of course uncommenting those lines, I finally open the Netlogo file with the "extensions [ r ]" line at the beginning ... and I get no more error notifications.
Related
I'm trying to install wholebrain by Daniel Fürth, following the instructions on the macosX install page (available here). I am running MacOS Big Sur 11.5.2, R 4.1.2, and RStudio 2021.09.1.
Unfortunately, the program is not straight-forward to install and requires significant developer tools to work correctly. I'm not a programmer and have almost no experience with coding, so I've been mucking through the instructions for two days now trying to get the install to work correctly and I'm firmly stuck on the final step.
In RS, when I run, devtools::install_github("tractatus/wholebrain", INSTALL_opts=c("--no-multiarch")) I get the following error message:
/bin/sh: pkg-config: command not found filter.cpp:9:10: fatal error: 'fftw3.h' file not found #include "fftw3.h" ^~~~~~~~~ 1 error generated. make: *** [filter.o] Error 1 ERROR: compilation failed for package ‘wholebrain’
I have been trying to figure out what this means for quite awhile now and I think I've narrowed it down to R is not reading the location of the fftw header file from where it was installed by Homebrew. (I could be totally wrong, again- not a programmer)
From what I understand, Homebrew always installs under opt/homebrew/cellar. And, in fact, in there is the compiled fftw program with the needed "fftw3.h" file. But for some reason, RStudio is not able to find and read the file in that location.
From random googling and reading of other posted issues, I think that RStudio may expect the file to be under usr/local/include. Can I just copy and paste the header file into that folder? Or will I be screwing something up if I do that? I am totally intimidated by fftw's description of manual compilation so I don't really want to attempt that. Is there a way to change where R is looking for that header file? I already set my wd to "/" so shouldn't R be able to access any folder on my computer?
I want to post an answer here for anyone who comes after me with the same issue. It came down to RStudio not recognizing the programs Homebrew had installed because it wasn't reading the file location where Homebrew saves them. Homebrew always installs programs in /opt/homebrew/... Here is what I had to do:
In RStudio, open your Renviron file using this command: usethis::edit_r_environ()
In the file that opens (which for me was totally blank), type: PATH=/opt/homebrew/bin:${PATH}, or whatever your particular path you want prepended to the Renviron path is.
Quit RStudio and, when prompted, save. Re-open RStudio and run Sys.getenv("PATH") to check. Your new path (in the example above, '/opt/homebrew/bin') should now be prepended to the list of paths that RStudio will use when looking for programs/files. For me this now looks like /opt/homebrew/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/opt/X11/bin:/Library/Apple/usr/bin:/Applications/RStudio.app/Contents/MacOS/postback
Finally, I want to say thank you very much to Mark Setchell who really helped point me in the correct direction!
When running the checks for my R-package (via devtools::check()) I face the warning ''qpdf' is needed for checks on size reduction of PDFs. I found this question were it was suggested (if I understood the answer correctly) to run Sys.which(Sys.getenv("R_QPDF", "qpdf")) and see whether qpdf is found or not. In my case this just returns
qpdf
""
so, I think I didn't install qpdf correctly. Unfortunately it seems to be quite complicated to install qpdf on Windows. My first side question is: does it really is so painful and complicated to install qpdf for Windows or is there an easy solution?
I've followed the instructions until it is said to add C:\MinGW-w64\bin and C:\MinGW-w64\lib\mingw to the PATH variable. But then I don't find further specific instructions to install qpdf, only about how to build qpdf with different other programs. The second side question is: is my assumption correct that after I've build qpdf it is installed? But the real question is: What is the best way to build qpdf? I tried the ./config-mingw32 and ./config-mingw64 commands from the section "Building with MinGW" in my C:\MinGW\msys\1.0\bin\bash.exe but got the error messages ./config-mingw32: No such file or directory and have no idea how to fix this issue.
I'm using Windows 10, R version 3.3.2 Patched (2017-01-07 r71934) -- "Sincere Pumpkin Patch" and RStudio 1.0.136.
You basically do not need to build the file on windows. Please follow three steps below:
Download qpdf for windows from https://sourceforge.net/projects/qpdf/?source=typ_redirect
Extract files in a temp folder
Copy the contents of the bin folder to %SystemRoot%\System32
job done!
Sys.which(Sys.getenv("R_QPDF", "qpdf"))
qpdf
"C:\\WINDOWS\\SYSTEM32\\qpdf.exe"
To flesh out an answer provided elsewhere:
If you are running the 32-bit version of R, it is important that you download the 32-bit version of qpdf, which is the version linked from the SourceForge homepage. If you are running a 64-bit installation of R, you will need to do a bit of digging to locate the 64-bit version of qpdf, which is buried a little more deeply (version 10.0.1 is listed here).
Rather than copying files to C:/Windows/System32, a potentially safer option is to extracted the zipped qpdf directory to C:\Program Files. If you do this, you'll need to add C:\Program Files\qpdf-version_number\bin to your system PATH under the environment variables.
To do this within R, run Sys.setenv('PATH' = paste0('C:\Program Files\qpdf-version_numer\bin;', Sys.getenv('PATH')))
To do this in Windows, open the start menu, type "edit the system environment variables" to open the System Properties, and at the bottom of the "Advanced" tab click "Environment variables". Find the "Path" entry under "System variables" and click "Edit". Then, re-start R so it picks up the modified PATH.
One further step may be required to convince Windows that pqdf is safe to run.
Navigate to C:\Program Files\qpdf-version_numer\bin and execute qpdf.exe (by double-clicking). Windows 10 throws up a security warning, as it's an unrecognized executable file. You'll need to use the more options link to find the button to run the program. This done, Windows will recognize the file as safe to run and allow other software, including R, to use it.
I'm exploring package building on Windows 7 but have been running into trouble after reaching the Command Prompt stage. The following thread appears to be on the same topic that I'm having trouble with, but the question remains unresolved:
Cannot install R package in Windows 7
The problem: whenever I try an R CMD command in Command Prompt (e.g. I've tried R CMD install pkgName, R cmd install pkgName, Rcmd install pkgName, where pkgName is a place-holder for an actual package that has been R CMD checked on OS X and also posted on CRAN, where I have the unzipped source in the current working directory), I get the following error message:
'R' is not recognized as an internal or external command,
operable program or batch file.
(If I try the Rcmd install pkgName command, then the error starts out as 'Rcmd' is not ....) Note that even if I type in just R in Command Prompt and hit enter, I get the same error, so I'm not even able to bring up R here, though it opens perfectly fine in its stand-alone interface.
I have examined the following guides without success in identifying the trouble:
Karl W Broman's website
Rob J Hyndman's website
Steven Mosher's blog
The most immediate thing that came to mind was that the path variables in Windows were not set right, but this also has not (yet) led to the answer. For example, I have triple-checked the paths to ensure they are correct, including for the R version number, that x64 in the path name is accurate, etc.
I realize this is a complex issue to remotely diagnose, but any advice and suggestions on resolving this trouble is appreciated. For reference, below are the steps I have taken already to try to resolve this issue:
Uninstall R and Rtools
Install the latest version of R (2.15.0)
Install Rtools215 to match R version 2.15.0
Originally I let Rtools specify the path variables (turning that option on during installation). No success after this method.
I updated the path variables on my computer, where the below paths were used:
C:\Rtools\bin; C:\Program Files\R\R-2.15.0\bin\x64;
I've also tried the R CMD (and Rcmd) commands with the following paths included (note that these paths don't lead to anything on my computer, so I tried doing R CMD / Rcmd with and without them specified):
C:\Rtools\perl\bin; C:\Rtools\MinGW\bin;
Tried adding/removing the following path, which goes to the only other folder visible within the Rtools folder:
C:\Rtools\gcc-4.6.3;
Tried multiple variations of the R CMD commands, as noted earlier.
I tried this all a few months ago when I had R version 2.14.1 and Rtools214 installed, and I had the exact same trouble.
Note: I already had Cygwin installed prior to R and Rtools, and I have not installed MikTeX (yet).
Have you closed the command prompt and opened a new one after adjusting the PATH?
Enter the command PATH on the command line and ensure that you are properly updating your path
Try navigating to the directory where R.exe is saved and running it locally -- cd C:\Program...\bin\x64, R.exe.
Ensure that you're running on Windows' Command Prompt and not Cygwin's terminal
If you actually have a space after the semi-colon in your PATH, you'll need to remove that: /bin;C:/Program.... Try combining that with Joshua's solution.
I attach my whole solution here:
Install Rtools which is compatible with my R version
Add PATH: C:\Program Files\R\R-2.15.1\bin\x64;C:\Rtools\bin;C:\Rtools\gcc-4.6.3\bin
In cmd, enter: R CMD INSTALL packagename
Click "enter", done.
I had a lot of trouble getting this to work, and finally found the golden nugget on r-project (R doesn't like spaces in paths) so here's how I finally did all this:
I installed R to "c:\programs" instead of "c:\program files...". My final path to RSCRIPT.exe is "C:\Programs\R\R-2.15.2\bin\Rscript.exe"
I added that directory to my PATH, but that doesn't seem to help
RStudio is also installed under c:\Programs (e.g. c:\Programs\RStudio), but RTools is installed under the "c:\" root directory (e.g. c:\RTools).
I downloaded all the packages to "c:\downloads\r"
I opened a command prompt in "c:\downloads\r" and ran the R CMD install from this downloads directory, specifying the path to R
e.g. "C:\Programs\R\R-2.15.2\bin\x64\R CMD INSTALL colorspace_1.2-0.zip"
It appears that the CMD processor is Case Sensitive. You have to use INSTALL vs. install
Simple solution, use quotes:
c:> "C:\Program Files\WinZip\wzunzip.exe"
if you run this, you don't need to worry about the space in Program Files.
Hope this help.
I encountered a similar problem while trying to use SparkR from Windows Power Shell. Each time I would do ".\sparkR.cmd" (I was inside the folder containing this file), it would throw an error message like,
cmd is not recognized as an internal and external
command...blah...blah...blah.
I solved the problem by adding "C:\Windows\System32" to my PATH.
I restarted my system and then repeated the process and this time, I saw a new error,
R is not recognized as an internal and external
command...blah...blah...blah.
I tried all sorts of approaches, including the ones mentioned above. NOTHING WORKED, I was probably wasn't efficient enough to make it work.
Then I came across this place at code.google. I simply copied the R.bat onto a notepad, named it as R.bat. Kept it inside the folder where sparkR.cmd was located. For me it was,
C:\Apache\spark-1.5.1-bin-hadoop2.6\bin\
The I placed it on my PATH as :
C:\Apache\spark-1.5.1-bin-hadoop2.6\bin\R.bat
Restarted my laptop, opened my Power Shell as an administrator and typed :
.\R.bat help
It worked fine. Then I typed,
.\sparkR.cmd
and there it was.
It worked.
I hope it helps to people new to R. Thank you G. Grothendieck.
In the .bat file add a line of code specifying the path of the folder where R is installed and then give the path of the script as follows -
#ECHO OFF
PATH C:\Program Files\R\R-3.5.1\bin
R CMD BATCH D:\project_abc\helloworld.R
Following this, run the .bat file and you will see the code in the script will run smoothly.
In my case the issue was solved by using Edit instead of New while selecting PATH in the window below:
enter image description here
After selecting Edit I added the directory below:
C:\Program Files\R\R-4.0.2\bin\x64
This solved the issue in my case.
I'm using a Windows 7 x64 machine with R-3.1.0. I installed the Rserve package through Rstudio.
The start of Rserve is successful with the following code in Rstudio:
library(Rserve)
Rserve()
I got the following output:
Starting Rserve...
"C:\R\R-31~1.0\library\Rserve\libs\x64\Rserve.exe"
My problem is that I couldn't locate the configuration file. Apparently it can't be "/etc/Rserv.conf".
I did come across a webpage saying that the config file is Rserv.cfg in the working directory (unless changed at compile-time). But which working directory? I have checked the working directory of the current R project as well as the Rserve library directory, but it was not there...Could someone help me with this please? Thank you.
Rserve does not automatically come with a config file, you must make one. Best steps for doing so:
Navigate to the file where you just installed Rserve.exe (C:\R\R-31~1.0\library\Rserve\libs\x64\R, based on the message you copied here)
Find Rserve.exe, Reserve_d.exe, and Rserve.dll there. Copy these files.
Navigate to where R.dll is on your computer. This is probably C:\Program Files\R\R-3.1.3\bin\x64, but may be different depending on where you installed R to.
Copy the 3 files mentioned above to this location.
Create a text file here named "Rserv.cfg" with the arguments you are looking for, such as port 6312 or library(mvoutlier). Yes, I know that this is different from the documentation, but if you start Rserve_d.exe you will see that this is the file it is looking for. I have not had success naming it anything else.
You can start Rserve by specifying the location of the config file. In R instead of just Rserve() try the following:
Rserve(args="--RS-conf C:\\folder\\Rserv.cfg")
If path is more complicated you need to massage it a little bit:
Rserve(args="--RS-conf C:\\PROGRA~1\\R\\R-215~1.2\\library\\Rserve\\Rserv.cfg")
Look in the $RHOME/bin directory
If you can't find it here is a different way to approach it:
Download Rserve at [http://rforge.net/snapshot/Rserve_.tar.gz], and save it in your desired directory
Run R CMD INSTALL Rserve_.tar.gz
This allows you to leave Rserve where you want it.
After looking at the Rserve source code and making some test I found that on Windows platform Rserve try to load the configuration file from the current working directory. Also pay attention because on Windows the file name is RServ.cfg and not Rserv.conf as documented.
The current working directory depends of the process, for example using RStudio by default it is your Documents and Settings folder:
C:\Users\[username]\Documents
but can be changed in the "Global Options" of the IDE
So you can create an "RServ.cfg" text file in that directory with your needed options and starting RServe in the usual way in RStudio
Rserve()
will load your configuration.
I have recently begun using knitr with Rstudio. I ran into the "No tex installation detected. Please install TeX before compiling." error in both my Ubuntu and windows OS's.
After some research I was able to amend the issue in Ubuntu by adding the directory of my tex installation to PATH. I did this by including the following line in Renviron.site
PATH=/usr/local/texlive/2013/bin:${PATH}
However, the issue remains for my windows installation. I was unable to find the Renviron.site file, so I created one in the same directory of Renviron, and added the location of my tex installation in windows:
PATH=C:\texlive\2013\bin\win32:${PATH}
However this does not solve my problem and Rstudio is still unable to find my tex packages, such that
file.exists(Sys.which('texi2dvi'))
Returns FALSE.
How should I proceed?
R will always source the Rprofile.site file first. On Windows, the file is in the C:\Program Files\R\R-n.n.n\etc directory.
see here: Add TeX path to R Studio - Ubuntu and here: Customizing Startup
I found package tinytex to be of interest. It allows to install a minimal tex distrib without administrator privilege, takes care of path, and useful function to add missing tex packages. Works well with knitr
It is written by Xie Yihui author of knitr.
Let me build up to #HeavenZone's answer:
You should go onto
C:\Program Files\R\R-n.n.n\etc
directory and give permissions to modify the files in on the folder. This can be done by doing
Right click->Properties->Security->Edit->Select Users->In Permissions
list tick->Write
Once you're done you should open the file Renviron.site on the directory etc. And add a line like
PATH=C:\Program Files\MiKTeX 2.9\miktex\bin\64:${PATH}
I wrote a new line, assume that the definitions are concatenated. Perhaps you need also \pdflatex.exe in the above path.
Once you have this, restart Rstudio and it should grasp now the latex distribution.
I would probably change the title of this question to include that this is the Windows version so that it is easy to look for it, however my edit was rejected so I leave it to someone else...