As per my understanding of the below documentation, it seems, #EnableKafka annotation might be required for consumers/listeners.
https://docs.spring.io/spring-kafka/api/org/springframework/kafka/annotation/EnableKafka.html
Does this mean, this annotation is applicable in the context of consumers but not producers? Please clarify.
If you have doubts, it is better just to try that from your project and see how it is going.
Another way is to follow by its source code to analyze the logic behind that annotation. This way is easier for me because I'm too lazy to wait for build to fail when I'm not sure in the outcome. So, let's follow together!
#Import(KafkaListenerConfigurationSelector.class)
public #interface EnableKafka {
}
See that KafkaListenerConfigurationSelector. It says that for itself - listener. Since there is nothing about producer on this annotation, then no need in it when you have only a producer logic in your application.
Related
Autofac provides the OnActivated() method, which provides the capability to run any action after constructing a registered type.
Is possible to use a similar method in MvvmCross? Do you have any ideas to provide the same functionality?
It usually pays to understand the fundamentals of Dependency Injection (DI) instead of relying on particular DI Container features. Ask yourself the question: If I didn't have a DI Container, then how would I solve my problem?
Ironically, it turns out that things are usually much simpler with Pure DI.
If you didn't have a DI Container, then how would you run an action after construction of an object?
The easiest solution is to provide a factory that creates and initialises the object. Assuming the same API and requirements as the Autofac documentation implies, you could do this:
public static Dependency2 CreateDependency2(ITestOutputHelper output, Dependency1 dependency)
{
var d2 = new Dependency2(ITestOutputHelper output, Dependency1 dependency);
d2.Initialize();
return d2;
}
If you still must use another DI Container, most of them enable you to register a factory like the above against the type. I don't know how MvvmCross works, but I'd be surprised if this wasn't possible. If it isn't, you can implement an Adapter over your actual dependency. The Adapter would take care of running the action on the adapted object.
FWIW, if an object isn't in a valid state before you've run some action on it, then encapsulation is broken. The fundamental characteristic of encapsulation is that objects protect their invariants so that they can never be in invalid states. If possible, consider a better API design.
I've managed to build some fairly simple tests that do not utilise a Page Object Model structure. The Specflow steps will just call the driver methods (such as finding an element on the page and asserting the text is correct).
The tests use NUnit as the runner and I have managed to add parallel execution by adding [Parallelizable(ParallelScope.Fixtures)] to the assembly class for the solution. This works well, but the reports that come out of NUnit are a bit messy and I'd like more useful information on them (such as screenshots).
I have since added Extent reports to the solution, whilst this works fine for when the tests run sequentially, an error message appears when running them in parallel.
The FeatureContext.Current static accessor cannot be used in multi-
threaded execution. Try injecting the feature context to the binding
class.
The Context.Current steps are used in the creation of the Extent reports. I've been reading the documentation relating to multithreading from the Specflow site, but I'm having issues understanding the concept and figuring out how I can inject FeatureContext into the binding class. I'm trying to follow this example from the site:
[Binding]
public class StepsWithScenarioContext : Steps
{
[Given(#"I put something into the context")]
public void GivenIPutSomethingIntoTheContext()
{
this.ScenarioContext.Set("test-value", "test-key");
}
}
I've also been trying to follow other examples, but I've yet to see any documentation relating how to use ScenarioContext with something like driver.findElement(By.Id("blah")).
Any help would be appreciated, I am fairly new to test automation.
You need to have a property in your Steps class:
ScenarioContext _scenarioContext.
In Constructor you adding ScenarioContext scenarioContext as a parameter and initilizing it using:
_scenarioContext = scenarioContext
Simple example:
class Steps
ScenarioContext _scenarioContext;
public Steps (ScenarioContext scenarioContext)
{
_scenarioContext = scenarioContext;
}
Only I don't know, how it will work with inheritance.
Still exploring the new ASP.NET MVC5, now with build in DI!
No Problem so far, I can just inject my Handlers (I don't like the Term Service, since this defines to me a Platform-Neutral Interface):
// This method gets called by the runtime. Use this method to add services to the container.
public void ConfigureServices(IServiceCollection services)
{
services.AddApplicationInsightsTelemetry(Configuration);
services.Configure<Model.Meta.AppSettings>(Configuration.GetSection("AppSettings"));
services.AddSingleton(typeof(Logic.UserEndPointConfigurationHandler));
services.AddSingleton(typeof(Logic.NetworkHandler));
services.AddMvc();
}
Works fine, also the strongly typed Configuration-Object "AppSettings" works perfectly fine.
Also the Injection in the Controllers works as well.
But now my collaps: I seperated my DataAccess from the Handlers, and obviously I'd like to inject them as well:
public class UserEndPointConfigurationHandler
{
private readonly DataAccess.UserEndPointAccess _access;
public UserEndPointConfigurationHandler(DataAccess.UserEndPointAccess access)
{
_access = access;
}
But bam, UserEndPointAccess can't be resolved. So it seems like even I directly request to DI an Class with a Parameterless-Constructor, I need to register that. For this case, sure I should Interface and register them, but what does that mean for internal helper classes I also inject?
According to the Docs: http://docs.asp.net/en/latest/fundamentals/dependency-injection.html#recommendations and also the examples I found, all people in the world only seem to communicate between Controllers and some Repositories. No Business-Layer and no Classes on different Abstraction-Levels in Assemblies.
Is the Microsoft DI approach something totally differnt than the good ol' Unity one, where I can really decouple as fine granular as I'd like to?
Thanks in advance.
Matthias
Edit #Nightowl: I add my answer here, since it's a bit longer.
First of all, Unity does automatically create Instances, if I request a conecrete Type. This allows me to inject Types I register and Types, like Helper classes etc. I don't need to. This combination allows me to use DI everywhere.
Also in your Example I'd need to know the DataAcces in the WebGui, which is quite thight coupled. Well, I know there are solutions for this via Reflection, but I hoped Microsoft did something in this Topic, but probably that'd mean to big of a change.
Also allows Unity to store Instances or Instructions how to create them, another huge feature, which is missing at the moment.
Probably I'm just to spoiled, what refined DI-Libraries do, probably they also do to much, but at the moment the Microsoft-Implementation is just a huge downgrade according to my Information.
MVC Core follows the the composition root pattern, which is where object graphs are created based off of a set of instructions to instantiate them. I think you are misinterpreting what the IServiceCollection is for. It does not store instances, it stores instructions on how to create instances. The instances aren't actually created until a constructor somewhere in the object graph requests one as a constructor parameter.
So, in short the reason why your service (which you call UserEndPointAccess) is not being instantiated when you request it is because you have not configured the IServiceCollection with instructions on how to create it.
// This method gets called by the runtime. Use this method to add services to the container.
public void ConfigureServices(IServiceCollection services)
{
services.AddApplicationInsightsTelemetry(Configuration);
services.Configure<Model.Meta.AppSettings>(Configuration.GetSection("AppSettings"));
services.AddSingleton(typeof(Logic.UserEndPointConfigurationHandler));
services.AddSingleton(typeof(Logic.NetworkHandler));
// Need a way to instantiate UserEndPointAccess via DI.
services.AddSingleton(typeof(DataAccess.UserEndPointAccess));
services.AddMvc();
}
So it seems like even I directly request to DI an Class with a Parameterless-Constructor, I need to register that.
If you are doing DI correctly, each service class will only have a single constructor. If you have more than one it is known as the bastard injection anti-pattern, which essentially means you are tightly coupling your class definition to other classes by adding references to them as foreign defaults.
And yes, you need to register every type you require (that is not part of MVC's default registration). It is like that in Unity as well.
I am working on my first Symfony project. I wonder what is the best / recommendet method to write log messages from anywhere in my code.
So far I used Monolog which works great when being used in a controller:
public function indexAction() {
$logger = $this->get('logger');
$logger->info('I just got the logger');
$logger->error('An error occurred');
// ...
}
But how can I use this code from any classe/code from my project? Doctrine entity classes for example cannot use $this->get('logger') to create the logger. How can I access the service in these classes? Or what other methode to log message is recommended in these cases?
EDIT: Of course I could create the logger in any controller and pass it down to all other classes. But this would be quite very cumbersome. There has to be a better way.
IMO, a first approach could be the creation of Event Listeners for specific actions in order to log only what you have decided to.
Have a look to this chapter : http://symfony.com/doc/current/cookbook/event_dispatcher/event_listener.html
Hope it will help you.
I'm trying to use Groovy mixin transformation on a spring-mvc controller class but Spring does not pickup the request mapping from the mixed in class.
class Reporter {
#RequestMapping("report")
public String doReport() {
"report"
}
}
#Mixin(Reporter)
#Controller
#RequestMapping("/a")
class AController {
#RequestMapping("b")
public String doB() {
"b"
}
}
When this code is run .../a/b url is mapped and works but .../a/report is not mapped and returns HTTP 404. In debug mode, I can access doReport method on AController by duck typing.
This type of request mapping inheritance actually works with Java classes when extends is used; so why it does not work with Groovy's mixin? I'm guessing it's either that mixin transformation does not transfer annotations on the method or that spring's component scanner works before the mixin is processed. Either way, is there a groovier way to achieve this functionality (I don't want AController to extend Reporter for other reasons, so that's not an option) ?
You can find below the responses I got from Guillaume Laforge (Groovy project manager) in Groovy users mailing list.
Hi,
I haven't looked at Spring MVC's implementation, but I suspect that
it's using reflection to find the available methods. And "mixin"
adding methods dynamically, it's not something that's visible through
reflection.
We've had problems with #Mixin over the years, and it's implementation
is far from ideal and bug-ridden despite our efforts to fix it. It's
likely we're going to deprecate it soon, and introduce something like
static mixins or traits, which would then add methods "for real" in
the class, which means such methods like doReport() would be seen by a
framework like Spring MVC.
There are a couple initiatives in that area already, like a prototype
branch from Cédric and also something in Grails which does essentially
that (ie. adding "real" methods through an AST transformation).
Although no firm decision has been made there, it's something we'd
like to investigate and provide soon.
Now back to your question, perhaps you could investigate using
#Delegate? You'd add an #Delegate Reporter reporter property in your
controller class. I don't remember if #Delegate carries the
annotation, I haven't double checked, but if it does, that might be a
good solution for you in the short term.
Guillaume
Using the #Delegate transformation did not work on its own, so I needed another suggestion.
One more try... I recalled us speaking about carrying annotations for
delegated methods... and we actually did implement that already. It's
not on by default, so you have to activate it with a parameter for the
#Delegate annotation:
http://groovy.codehaus.org/gapi/groovy/lang/Delegate.html#methodAnnotations
Could you please try with #Delegate(methodAnnotations = true) ?
And the actual solution is:
class Reporter {
#RequestMapping("report")
public String doReport() {
"report"
}
}
#Controller
#RequestMapping("/a")
class AController {
#Delegate(methodAnnotations = true) private Reporter = new Reporter
#RequestMapping("b")
public String doB() {
"b"
}
}
When you map requests with annotations, what happens is that once the container is started, it scans the classpath, looks for annotated classes and methods, and builds the map internally, instead of you manually writing the deployment descriptor.
The scanner reads methods and annotations from the compiled .class files. Maybe Groovy mixins are implemented in such a way that they are resolved at runtime, so the scanner software can't find them in the compiled bytecode.
To solve this problem, you have to find a way to statically mixin code at compile time, so that the annotated method is actually written to the class file.