I can't install any package because of beepr package error - r

I keep getting this error whenever I open rstudio.
Error in library(beepr) : there is no package called ‘beepr’
Even, when I tried installing the package itself, I get the same error!
Not just this, I was trying to install other packages on R and I couldn't because of the same error!
Edit:
I tried installing beepr package
install.packages("beepr")
and it gave that error
also installing the dependencies ‘glue’, ‘magrittr’, ‘stringi’, ‘stringr’, ‘audio’
trying URL 'https://cran.rstudio.com/src/contrib/glue_1.4.2.tar.gz'
Content type 'application/x-gzip' length 99049 bytes (96 KB)
==================================================
downloaded 96 KB
trying URL 'https://cran.rstudio.com/src/contrib/magrittr_2.0.1.tar.gz'
Content type 'application/x-gzip' length 265580 bytes (259 KB)
==================================================
downloaded 259 KB
trying URL 'https://cran.rstudio.com/src/contrib/stringi_1.7.4.tar.gz'
Content type 'application/x-gzip' length 7599762 bytes (7.2 MB)
==================================================
downloaded 7.2 MB
trying URL 'https://cran.rstudio.com/src/contrib/stringr_1.4.0.tar.gz'
Content type 'application/x-gzip' length 135777 bytes (132 KB)
==================================================
downloaded 132 KB
trying URL 'https://cran.rstudio.com/src/contrib/audio_0.1-8.tar.gz'
Content type 'application/x-gzip' length 57390 bytes (56 KB)
==================================================
downloaded 56 KB
trying URL 'https://cran.rstudio.com/src/contrib/beepr_1.3.tar.gz'
Content type 'application/x-gzip' length 922244 bytes (900 KB)
==================================================
downloaded 900 KB
Error in library(beepr) : there is no package called ‘beepr’
Execution halted
Warning in install.packages :
installation of package ‘glue’ had non-zero exit status
Error in library(beepr) : there is no package called ‘beepr’
Execution halted
Warning in install.packages :
installation of package ‘magrittr’ had non-zero exit status
Error in library(beepr) : there is no package called ‘beepr’
Execution halted
Warning in install.packages :
installation of package ‘stringi’ had non-zero exit status
Error in library(beepr) : there is no package called ‘beepr’
Execution halted
Warning in install.packages :
installation of package ‘audio’ had non-zero exit status
Error in library(beepr) : there is no package called ‘beepr’
Execution halted
Warning in install.packages :
installation of package ‘stringr’ had non-zero exit status
Error in library(beepr) : there is no package called ‘beepr’
Execution halted
Warning in install.packages :
installation of package ‘beepr’ had non-zero exit status
The downloaded source packages are in
‘/tmp/Rtmp0CeBTl/downloaded_packages’
Updating HTML index of packages in '.Library'
Making 'packages.html' ... done
Warning in install.packages :
converting NULL pointer to R NULL
Warning message:
R graphics engine version 14 is not supported by this version of RStudio. The Plots tab will be disabled until a newer version of RStudio is installed.

Related

R doesn't work properly with conda installation

I tried installing r with conda and every time I try that it doesn't work.
conda create --name test2 -c conda-forge r-base r-seurat
I assumed that by using conda-forge channel, it will install the most updated version. What happened is that it installs the oldest version of R which is 3.6.1
At the same time, the "Seurat" package requires a newer version of R than 3.6.1
So, I specified a version of R in that code and it didn't work too
conda create --name test2 -c conda-forge r-base=4.1.1
This worked for installing a newer R version but when I try activating R on that environment, it gives me an error
Error in library(beepr) : there is no package called ‘beepr’
So, I opened rstudio from that environment and tried installing (beepr) package and it didn't work! It tries to install other packages as a requirement for it and at the same time gives the same error of not having "beepr" installed.
That's one of the packages it tried to install.
Warning in install.packages : installation of package ‘glue’ had non-zero exit status Error in library(beepr) : there is no package called ‘beepr’ Execution halted
and it does that with the rest of packages required.
That's the error I get from installing beepr
also installing the dependencies ‘glue’, ‘magrittr’, ‘stringi’, ‘stringr’, ‘audio’ trying URL 'https://cran.rstudio.com/src/contrib/glue_1.4.2.tar.gz' Content type 'application/x-gzip' length 99049 bytes (96 KB) ================================================== downloaded 96 KB trying URL 'https://cran.rstudio.com/src/contrib/magrittr_2.0.1.tar.gz' Content type 'application/x-gzip' length 265580 bytes (259 KB) ================================================== downloaded 259 KB trying URL 'https://cran.rstudio.com/src/contrib/stringi_1.7.4.tar.gz' Content type 'application/x-gzip' length 7599762 bytes (7.2 MB) ================================================== downloaded 7.2 MB trying URL 'https://cran.rstudio.com/src/contrib/stringr_1.4.0.tar.gz' Content type 'application/x-gzip' length 135777 bytes (132 KB) ================================================== downloaded 132 KB trying URL 'https://cran.rstudio.com/src/contrib/audio_0.1-8.tar.gz' Content type 'application/x-gzip' length 57390 bytes (56 KB) ================================================== downloaded 56 KB trying URL 'https://cran.rstudio.com/src/contrib/beepr_1.3.tar.gz' Content type 'application/x-gzip' length 922244 bytes (900 KB) ================================================== downloaded 900 KB Error in library(beepr) : there is no package called ‘beepr’ Execution halted Warning in install.packages : installation of package ‘glue’ had non-zero exit status Error in library(beepr) : there is no package called ‘beepr’ Execution halted Warning in install.packages : installation of package ‘magrittr’ had non-zero exit status Error in library(beepr) : there is no package called ‘beepr’ Execution halted Warning in install.packages : installation of package ‘stringi’ had non-zero exit status Error in library(beepr) : there is no package called ‘beepr’ Execution halted Warning in install.packages : installation of package ‘audio’ had non-zero exit status Error in library(beepr) : there is no package called ‘beepr’ Execution halted Warning in install.packages : installation of package ‘stringr’ had non-zero exit status Error in library(beepr) : there is no package called ‘beepr’ Execution halted Warning in install.packages : installation of package ‘beepr’ had non-zero exit status The downloaded source packages are in ‘/tmp/Rtmp0CeBTl/downloaded_packages’ Updating HTML index of packages in '.Library' Making 'packages.html' ... done Warning in install.packages : converting NULL pointer to R NULL Warning message: R graphics engine version 14 is not supported by this version of RStudio. The Plots tab will be disabled until a newer version of RStudio is installed.
Did anyone face that issue before?

unable to install package in R Studio

I am unable to install any package from my R Studio. below errors happen while installing the package.
> install.packages("quantmod")
Installing package into '/home/shilab/R/x86_64-pc-linux-gnu-library/3.5'
(as 'lib' is unspecified)
also installing the dependencies 'xts', 'TTR'
trying URL 'https://cran.rstudio.com/src/contrib/xts_0.11-2.tar.gz'
Content type 'application/x-gzip' length 537024 bytes (524 KB)
==================================================
downloaded 524 KB
trying URL 'https://cran.rstudio.com/src/contrib/TTR_0.23-4.tar.gz'
Content type 'application/x-gzip' length 310105 bytes (302 KB)
==================================================
downloaded 302 KB
trying URL 'https://cran.rstudio.com/src/contrib/quantmod_0.4-15.tar.gz'
Content type 'application/x-gzip' length 150327 bytes (146 KB)
==================================================
downloaded 146 KB
Error in ptions(error = function() { : could not find function "ptions"
Execution halted
Warning in install.packages :
installation of package 'xts' had non-zero exit status
Error in ptions(error = function() { : could not find function "ptions"
Execution halted
Warning in install.packages :
installation of package 'TTR' had non-zero exit status
Error in ptions(error = function() { : could not find function "ptions"
Execution halted
Warning in install.packages :
installation of package 'quantmod' had non-zero exit status
The downloaded source packages are in
'/tmp/Rtmp7dTsAe/downloaded_packages'

Why plotly fails to install using R-Studio but not in R?

OS: Ubuntu 17.1
I have tried to install plotly on R studio using install.packages("plotly")
It failed with the following log:
Installing package into ‘/home/company/R/x86_64-pc-linux-gnu-library/3.4’
(as ‘lib’ is unspecified)
also installing the dependencies ‘htmlwidgets’, ‘hexbin’, ‘crosstalk’, ‘data.table’
trying URL 'https://cloud.r-project.org/src/contrib/htmlwidgets_1.0.tar.gz'
Warning in install.packages :
cannot open URL 'https://cloud.r-project.org/src/contrib/htmlwidgets_1.0.tar.gz': HTTP status was '404 Not Found'
Error in download.file(url, destfile, method, mode = "wb", ...) :
cannot open URL 'https://cloud.r-project.org/src/contrib/htmlwidgets_1.0.tar.gz'
Warning in install.packages :
download of package ‘htmlwidgets’ failed
trying URL 'https://cloud.r-project.org/src/contrib/hexbin_1.27.2.tar.gz'
Content type 'application/x-gzip' length 491560 bytes (480 KB)
==================================================
downloaded 480 KB
trying URL 'https://cloud.r-project.org/src/contrib/crosstalk_1.0.0.tar.gz'
Content type 'application/x-gzip' length 563474 bytes (550 KB)
==================================================
downloaded 550 KB
trying URL 'https://cloud.r-project.org/src/contrib/data.table_1.10.4-3.tar.gz'
Content type 'application/x-gzip' length 3071833 bytes (2.9 MB)
==================================================
downloaded 2.9 MB
trying URL 'https://cloud.r-project.org/src/contrib/plotly_4.7.1.tar.gz'
Content type 'application/x-gzip' length 1034951 bytes (1010 KB)
==================================================
downloaded 1010 KB
Warning in install.packages :
system call failed: Cannot allocate memory
Warning in install.packages :
installation of package ‘hexbin’ had non-zero exit status
Warning in install.packages :
system call failed: Cannot allocate memory
Warning in install.packages :
installation of package ‘crosstalk’ had non-zero exit status
Warning in install.packages :
system call failed: Cannot allocate memory
Warning in install.packages :
installation of package ‘data.table’ had non-zero exit status
Warning in install.packages :
system call failed: Cannot allocate memory
Warning in install.packages :
installation of package ‘plotly’ had non-zero exit status
The downloaded source packages are in
‘/tmp/RtmpTFlAaE/downloaded_packages’
For some reason it can't allocate memory but in R it succeeds?
What is wrong here? Please advise why can't I install it straight forward?
You should try to install the development version of plotly (on GitHub) via devtools:
devtools::install_github("ropensci/plotly")

car package in Ubuntu machine 16.04

I can't install car package in R in an Ubuntu VM 16.04.
My last attempt was through terminal console of R.
The same result when I try to run it through R studio or using devtools
I receive the following errors:
> install.packages('car')
Installing package into ‘/home/stefan/R/x86_64-pc-linux-gnu-library/3.2’
(as ‘lib’ is unspecified)
--- Please select a CRAN mirror for use in this session ---
also installing the dependencies ‘nloptr’, ‘lme4’, ‘pbkrtest’
trying URL 'https://ftp.cc.uoc.gr/mirrors/CRAN/src/contrib/nloptr_1.0.4.tar.gz'
Content type 'application/octet-stream' length 353957 bytes (345 KB)
==================================================
downloaded 345 KB
trying URL 'https://ftp.cc.uoc.gr/mirrors/CRAN/src/contrib/lme4_1.1-15.tar.gz'
Content type 'application/octet-stream' length 3610706 bytes (3.4 MB)
==================================================
downloaded 3.4 MB
trying URL 'https://ftp.cc.uoc.gr/mirrors/CRAN/src/contrib/pbkrtest_0.4-7.tar.gz'
Content type 'application/octet-stream' length 156406 bytes (152 KB)
==================================================
downloaded 152 KB
trying URL 'https://ftp.cc.uoc.gr/mirrors/CRAN/src/contrib/car_2.1-6.tar.gz'
Content type 'application/octet-stream' length 627349 bytes (612 KB)
==================================================
downloaded 612 KB
ERROR: failed to lock directory ‘/home/stefan/R/x86_64-pc-linux-gnu-library/3.2’ for modifying
Try removing ‘/home/stefan/R/x86_64-pc-linux-gnu-library/3.2/00LOCK-nloptr’
ERROR: dependency ‘nloptr’ is not available for package ‘lme4’
* removing ‘/home/stefan/R/x86_64-pc-linux-gnu-library/3.2/lme4’
ERROR: dependency ‘lme4’ is not available for package ‘pbkrtest’
* removing ‘/home/stefan/R/x86_64-pc-linux-gnu-library/3.2/pbkrtest’
ERROR: dependency ‘pbkrtest’ is not available for package ‘car’
* removing ‘/home/stefan/R/x86_64-pc-linux-gnu-library/3.2/car’
The downloaded source packages are in
‘/tmp/RtmpXR2ZjI/downloaded_packages’
Warning messages:
1: In install.packages("car") :
installation of package ‘nloptr’ had non-zero exit status
2: In install.packages("car") :
installation of package ‘lme4’ had non-zero exit status
3: In install.packages("car") :
installation of package ‘pbkrtest’ had non-zero exit status
4: In install.packages("car") :
installation of package ‘car’ had non-zero exit status

install.package() on RStudio on Amazon EC2 doesn't work. Package not available for R version 3.3.3

I've seen this: How should I deal with "package 'xxx' is not available (for R version x.y.z)" warning?
and been through the list. No luck. I've also navigated via SSH to my library to see if there was some LOCK file or corrupt install. There is nothing there.
I literally just installed RStudio on Amazon EC2 and can't install the any new packages.
I've done it this way: https://aws.amazon.com/blogs/big-data/running-r-on-aws/
I've also used Ubuntu with Louis Anslett's AMI: http://www.louisaslett.com/RStudio_AMI/
I get the same problem in both. I have downloaded them manually and installed the tar.gz files from the temp directory. The CRAN repository seems to be fine because install.packages() downloads the tar.gz to /tmp/Rtmp2Rh9Zr/downloaded_packages/ just fine, but then the actual install process fails.
When I run install.packages("haven") for instance, it says
> install.packages("haven")
Installing package into ‘/home/jblocher/R/x86_64-redhat-linux-gnu-library/3.3’
(as ‘lib’ is unspecified)
also installing the dependencies ‘R6’, ‘assertthat’, ‘rlang’, ‘Rcpp’, ‘readr’, ‘hms’, ‘tibble’, ‘BH’
trying URL 'https://cran.rstudio.com/src/contrib/R6_2.2.1.tar.gz'
Content type 'application/x-gzip' length 325641 bytes (318 KB)
==================================================
downloaded 318 KB
trying URL 'https://cran.rstudio.com/src/contrib/assertthat_0.2.0.tar.gz'
Content type 'application/x-gzip' length 11612 bytes (11 KB)
==================================================
downloaded 11 KB
trying URL 'https://cran.rstudio.com/src/contrib/rlang_0.1.1.tar.gz'
Content type 'application/x-gzip' length 201419 bytes (196 KB)
==================================================
downloaded 196 KB
trying URL 'https://cran.rstudio.com/src/contrib/Rcpp_0.12.11.tar.gz'
Content type 'application/x-gzip' length 2485092 bytes (2.4 MB)
==================================================
downloaded 2.4 MB
trying URL 'https://cran.rstudio.com/src/contrib/readr_1.1.1.tar.gz'
Content type 'application/x-gzip' length 233793 bytes (228 KB)
==================================================
downloaded 228 KB
trying URL 'https://cran.rstudio.com/src/contrib/hms_0.3.tar.gz'
Content type 'application/x-gzip' length 7271 bytes
==================================================
downloaded 7271 bytes
trying URL 'https://cran.rstudio.com/src/contrib/tibble_1.3.1.tar.gz'
Content type 'application/x-gzip' length 91235 bytes (89 KB)
==================================================
downloaded 89 KB
trying URL 'https://cran.rstudio.com/src/contrib/BH_1.62.0-1.tar.gz'
Content type 'application/x-gzip' length 10181096 bytes (9.7 MB)
==================================================
downloaded 9.7 MB
trying URL 'https://cran.rstudio.com/src/contrib/haven_1.0.0.tar.gz'
Content type 'application/x-gzip' length 150016 bytes (146 KB)
==================================================
downloaded 146 KB
Error in library(haven) : there is no package called ‘haven’
Execution halted
Warning in install.packages :
installation of package ‘R6’ had non-zero exit status
Error in library(haven) : there is no package called ‘haven’
Execution halted
Warning in install.packages :
installation of package ‘assertthat’ had non-zero exit status
Error in library(haven) : there is no package called ‘haven’
Execution halted
Warning in install.packages :
installation of package ‘rlang’ had non-zero exit status
Error in library(haven) : there is no package called ‘haven’
Execution halted
Warning in install.packages :
installation of package ‘Rcpp’ had non-zero exit status
Error in library(haven) : there is no package called ‘haven’
Execution halted
Warning in install.packages :
installation of package ‘hms’ had non-zero exit status
Error in library(haven) : there is no package called ‘haven’
Execution halted
Warning in install.packages :
installation of package ‘BH’ had non-zero exit status
Error in library(haven) : there is no package called ‘haven’
Execution halted
Warning in install.packages :
installation of package ‘tibble’ had non-zero exit status
Error in library(haven) : there is no package called ‘haven’
Execution halted
Warning in install.packages :
installation of package ‘readr’ had non-zero exit status
Error in library(haven) : there is no package called ‘haven’
Execution halted
Warning in install.packages :
installation of package ‘haven’ had non-zero exit status
The downloaded source packages are in
‘/tmp/Rtmpia0VEs/downloaded_packages’
When I install it using the already downloaded package, it says
> install.packages("/tmp/Rtmp2Rh9Zr/downloaded_packages/haven_1.0.0.tar.gz")
Installing package into ‘/home/jblocher/R/x86_64-redhat-linux-gnu-library/3.3’
(as ‘lib’ is unspecified)
Warning in install.packages :
package ‘/tmp/Rtmp2Rh9Zr/downloaded_packages/haven_1.0.0.tar.gz’ is not available (for R version 3.3.3)
If you are providing an archive file to install.packages you may need to specify repos=NULL:
install.packages("/tmp/Rtmp2Rh9Zr/downloaded_packages/haven_1.0.0.tar.gz", repos=NULL)
On my EC2 instance, I ran into the same problems when trying to install packages on RStudio, e.g., car, that involve RAM-intensive compilations. This could be fixed by adding swap space as described here
http://www.exegetic.biz/blog/2015/06/amazon-ec2-adding-swap/

Resources