The Jim Hester YouTube video video looks like a potentially really helpful way to put breakpoints in Rcpp code that passes some variables in unexpected ways. However, when I follow the start up directions (Rstudio console copied below) it fails with a message that is not helpful to a new user of lldb.
gcn#GCN-MacBook-Pro-7 ISIMIPData % R -d lldb
(lldb) target create "/Library/Frameworks/R.framework/Resources/bin/exec/R"
Current executable set to '/Library/Frameworks/R.framework/Resources/bin/exec/R' (x86_64).
(lldb) run
error: process exited with status -1 (attach failed (Not allowed to attach to process. Look in the console messages (Console.app), near the debugserver entries when the attached failed. The subsystem that denied the attach permission will likely have logged an informative message about why it was denied.))
(lldb)
The Console.app output that I could find is not very useful.
A later post post describes an updated process but it too fails in a similar way. I'm using Rstudio version 1.4.1717 with R version 4.1.
Related
From the linux console I run a windows console tool using:
wine console_tool.exe ....
The console tool does not involve any windows. It's output is just textual.
Some output is added repeatedly after a given delay time.
However, besides the output of the console_tool.exe I get repeatedly the following error message also interleaved with the other output:
ERROR: ld.so: object 'libgtk3-nocsd.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
I already tried to export LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libgtk3-nocsd.so.0 but then the only change is that the error message changes:
ERROR: ld.so: object '/usr/lib/x86_64-linux-gnu/libgtk3-nocsd.so.0' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS64): ignored.
I also attempted to apt install the :i386 version of the libgtk3-nocsd.so.0 but it doesn't seem to exists.
I don't know why a console application may trigger a gtk error message. This is beyond my knowledge.
My preferred goal would be to tell wine that the .exe does not use windows and it does not need to not use gtk for windows emulation at all. However, as this may not be possible, my second preferred goal would be to solve the gtk issue.
Can you help me achieve at least one of those goals?
I do not know what the error messages mean. However, the wineconsole command runs console executable using wine. Example:
wineconsole console_tool.exe
Details
I am getting a build failure of my read-the-docs that I don't understand. The assertion of "verbatim" in line 2151 of nbsphinx.py is causing the build failure. So the build fails when I try to include the Jupyter Notebook tutorials I created. I compared current versions of the tutorials to previous versions which had not caused the build to fail, and I can't find a difference that could account for the current failure.
Read the Docs project URL: lofti_gaia
Build URL: https://github.com/logan-pearce/lofti_gaia
Read the Docs username: logan-pearce
Expected Result
A passing build including *.ipynb files
Actual Result
Build failed at line 2151 of nbsphinx.py due to assertion of 'Verbatim' failing.
Terminal output:
Running Sphinx v4.1.2
loading translations [en]... done
making output directory... done
WARNING: html_static_path entry '_static' does not exist
loading pickled environment... done
building [mo]: targets for 0 po files that are out of date
building [latex]: all documents
updating environment: 0 added, 0 changed, 0 removed
looking for now-outdated files... none found
processing lofti_gaia.tex... index installation tutorials/QuickStart tutorials/Tutorial api lofti loftitools
resolving references...
done
writing... failed
Exception occurred:
File "/home/docs/checkouts/readthedocs.org/user_builds/lofti-gaia/conda/latest/lib/python3.7/site-packages/nbsphinx.py", line 2151, in depart_codearea_latex
assert 'Verbatim' in lines[0]
AssertionError
The full traceback has been saved in /tmp/sphinx-err-x1h83s3m.log, if you want to report the issue to the developers.
Please also report this if it was a user error, so that a better error message can be provided next time.
A bug report can be filed in the tracker at <https://github.com/sphinx-doc/sphinx/issues>. Thanks!
According to the github issue 584 for nbsphinx (https://github.com/spatialaudio/nbsphinx/issues/584), this is due to a compatibility issue with sphinx 4.1.0. It can be gotten around by requiring sphinx version 4.0.2.
So in my requirements.txt file, I included sphinx==4.0.2, after which the build passes. So now my requirements.txt file looks like:
numpy
matplotlib
astropy>=4.0.1.post1
astroquery>=0.4
sphinx==4.0.2
ipython==7.19.0
nbsphinx>=0.8.6
and the build passes.
I have encountered the same issue. I did not solve it with .ipynb format, but converting the jupyter notebook to .rst format works.
May it helps
Some context on my environment:
I am running R Studio in a docker container called rocker/verse.
I downloaded this dataset from Kaggle, which has about 470 MB.
When working with it, at some point RStudio restart. It does't happen after a specific call, and I've seen the same problem when working with other projects. Though it is not related to my code, I am posting it bellow.
library(data.table)
fraud<- fread("path.csv")
fraud1<- sort(sample(nrow(fraud), nrow(fraud)*.7))
train<- fraud[fraud1, ]
test<-fraud[-fraud1, ]
Usually on the console this message is printed:
Error: Error occurred during transmission
And, this pop up is also showed:
I have no idea what is causing it. I would appreciate any help.
Delete the .Rhistory files associated with the installation and any open project.
You have a problem with your user data files for Rstudio. Follow the hints given here: https://community.rstudio.com/t/rstudio-server-error-occurred-during-transmission/84258 and here: https://support.rstudio.com/hc/en-us/articles/218730228-Resetting-a-user-s-state-on-RStudio-Server.
I am using Eclipse 2018-09 and StatET 3.6.1. I have two R environments: one for R 3.3.2, another for R 3.5.1. When I execute a command like ?lm to call up a help page in v3.3.2, the page appears in the StatET "R Help" pane, as I want it to. But when I execute the same command to call up a help page in v3.5.1, the console tells me "starting httpd help server," and the help page loads in my browser. How can I get help to load in the "R Help" pane when using v3.5.1?
The problem arises whether or not I run Eclipse as an administrator, and whether or not I "Auto Run" R 3.5.1 upon booting. And as far as I can tell, the configurations for the two versions of R are nearly identical:
Both are running Windows 10 and JRE 1.8.0_121.
Both with version 2.1 of the rj package.
For both, I've checked every box in "Run Configurations > R Console > R Console > Eclipse Integration," including "Enable R Help for StatET."
For both, options("help_type") == 'html'.
Inspection of the different log files that I get when using Auto Run with the two versions of R suggests that there is some sort of StatET config problem that has to do with Derby. These messages appear only when I boot R 3.5.1:
!ENTRY de.walware.statet.r.core 4 -1 2018-11-16 02:50:29.092
!MESSAGE An error occurred when initializing DB for model.
!STACK 1
org.eclipse.core.runtime.CoreException: An error occurred when loading embedded DB (Derby + DBCP)
DB ConnectionURL=[path redacted]\eclipse-workspace\.metadata\.plugins\de.walware.statet.r.core\db
[...]
Caused by: java.sql.SQLException: Another instance of Derby may have already booted the database C:\[path redacted]\eclipse-workspace\.metadata\.plugins\de.walware.statet.r.core\db.
[...]
Caused by: ERROR XSDB6: Another instance of Derby may have already booted the database C:\[path redacted]\eclipse-workspace\.metadata\.plugins\de.walware.statet.r.core\db.
But I don't know what to make of this problem or how to fix it.
Stephan Wahlbrink, the creator of StatET, recommended running this command at startup:
registerS3method("print", "help_files_with_topic", rj::print.help_files_with_topic)
I ran the command, and it solved the problem.
(Stephan added that the Derby errors that I saw in the logs were unrelated to the problem of displaying help in the "R Help" pane.)
I am doing the Pintos project on the side to learn more about operating systems. I had tons of devops trouble at first with it not running well on an 18.04 Ubuntu droplet. I am now running it on the VirtualBox image that UCCS tells students to download for pintos.
I finished project 1 and started to map out my solution to project 2. Following the instructions to create a file I ran
pintos-mkdisk filesys.dsk --filesys-size=2
pintos -- -f -q
but am getting error
Kernel PANIC at ../../threads/vaddr.h:87 in vtop(): assertion
`is_kernel_vaddr (vaddr)' failed.
I then tried running make check (all the tests). They are all failing for the same reason.
Am I missing something? Is there something I need to implement to fix this? I reread the instructions and didnt see anything?
Would appreciate help!
Thanks
I had a similar problem. My code for Project 1 ran fine, but I could not format the filesystem for Project 2.
The failure for me came from the following call chain:
thread_init() -> ... -> thread_schedule_tail() -> process_activate() -> pagedir_activate() -> vtop()
The problem is that init_page_dir is still NULL when pagedir_activate() is called. init_page_dir should have been initialized in paging_init() but this is called after thread_init().
The root cause was that my scheduler was being called too early, i.e. before the call to thread_start(). The reason for my problem was that I had built in a call to thread_yield() upon completion of every call to lock_release() which makes sense from a priority donation standpoint. Unfortunately, locks are used prior to the scheduler being ready! To fix this, I installed a flag called threading_started that bails in the first line of my thread_block() and thread_yield() functions if thread_start() has not yet been called.
Good luck!