i'm faceing some issue with an ssl certificate that i need for payment gateway,i already generated it but it doesn't work,i'm already doing a 3d payment gateway with a plugin that requires that certification..
I opened ssl via command prompt generated it but still i get the error request that the certification is invalid,is it possible that i did something wrong here is how it is required
OpenSSL Setup Prior to proceeding, it is necessary to download Win32 OpenSSL which can be found at: https://www.openssl.org/source/ After
the software is set up, it is important to enter a variable Path for a
bin catalogue.
In system variables: Variable PATH → “Change” Put a semicolon at the end of the line and enter a pathway to the bin folder:
c:\OpenSSL\bin For the next step, in the console, open the batch
folder and run run.bat (one of the attachments in the email received
from UPC)
The command can be performed for example in FAR. For this, place the cursor on run.bat file, press Ctrl Enter and add MERCHANT ID with
a space Key Generation Key generation and exchange is performed after
the Merchant sends a request for registration and receives E-shop
attributes via Internet (that includes a Merchant ID) Prior to key
generation, it is necessary to edit the file config.dat according to
the data of the E-shop. Config.dat data shall not strictly correspond
with the data in the request; such data is used for neither signature
generation nor signature verification and is only used for an
identification of a certificate file.
Can someone please explain me a little how to do it in steps i already watched some tutorials on youtube but i think i did something wrong,ill hope someone here can tell me how to fix this issue thank you very much
Related
I have created a new mimik developer account, and I was trying get the edge access token using the command "mimik-edge-cli account get-edge-access-token -t <--id token-->". But I am getting an "Error" as response.
I have tried with my previous account and in that case i am able to get the access token as shown below. Same issue happened for raspberrypi too.
why it is not able to get the access token while using a new account?
Please make sure to copy the ID Token from developer portal correctly, In most cases there might be a hidden character copied. Maybe just try copying the text by highlighting with mouse from first character to the last. Do NOT use the copy to clipboard button. Also please make sure that the edgeEngine on the PI is not associated already by checking with:
mimik-edge-cli account get-me
When you input command above, if you see an ID for value "accountId:" then your PI is already associated an CANNOT be associated again. You have to un-associate first and then associate with the new ID token from new account/project. You can verify that un-association is successful when above command shows empty value for "accountId:"
FOR FUTURE REFERENCE:
Please only tag questions with edgeSDK if it is related to FreeRTOS platform. For all other platforms, please use tag edgeEngine
I am going through this apigee tutorial.
When the first time, this script is invoked, it asks for the basic info regrading the user. By mistake, I gave the wrong organisation.
Checking user configuration info ...
Enter the password for user on server
enterprise.apige
e.com.
Password:
Verifying credentials on api.enterprise.apigee.com
...
Organization is invalid!
Please re-run the script
using the right org.
When I re-run the script, it is not asking me for the organisation. How can i set the organisation to the correct name
There is a userconf.sh file in trunk\setup.
Scroll to the top of the file, you will see something like this-
# there are 2 main cases to handle:
# (a) the user's $HOME/.learn-edge.rc file exists,
# in which case we just dot it in; or
# (b) it doesn't exist, in which case we prompt
# for the values and write out to the config file.
Apigee writes all your basic info content in $HOME/.learn-edge.rc. Just modify this-
export org="youraccount-eval"
to the correct value and it will work.
I already followed the steps exactly specified at this link
However, I am still having the issue. My build will get stuck when accessing the private repo.
$ julia --check-bounds=yes -e 'Pkg.clone("https://github.com/xxxx/xxxx.git")'
INFO: Cloning xxxx from https://github.com/xxxx/xxxx.git
Username for 'https://github.com':
Done: Job Cancelled
Note: I manually cancel it after a few minutes of waiting. How can I get it to use the SSH key I have setup and bypass this username and password field?
Note: xxxx is used in place of the name of my project to make this post general. I have already checked out the links on Travis CI and they don't make it clear what needs to occur. Thank you!
Update: I tried to add a GitHub Token Pkg.clone("https://fake_git_hub_token#github.com/xxxx/xxxx.git") and it still prompts me to sign in with the username. I gave that token full Repo access. Also, note that I am using Travis CL Virtual Machine.
In the Travis CI docs they reference the following:
Assumptions:
The repository you are running the builds for is called “myorg/main” and depends on “myorg/lib1” and “myorg/lib2”.
You know the credentials for a user account that has at least read access to all three repositories.
To pull in dependencies with a password, you will have to use the user name and password in the Git HTTPS URL: https://ci-user:mypassword123#github.com/myorg/lib1.git.
SOLUTION:
just add TravisCIUsername:mypassword#github.com/organizer_of_the_repo/Dependancy.git
In my case, I am going to make a fake admin account to run the tests since someone will have to expose their password to use this setup. Note that you can set up 2-factor authentication on the admin account such that only one person can access it even if they know the password.
You need to add the SSH key to the Travis UI under an environmental variable for your desired repo. You also need to add the key to the .travis.yml file on that repo.
https://docs.travis-ci.com is the docs for Travis
SOLUTION: just add Travis_CI_Username:my_password#github.com/organizer_of_the_repo/Dependancy.git to the travis.yml. file.
If this is unclear, please comment and I will update, but this is how I got it to work for me(even tho I went through all the SSH key business).
In my case, I am going to make a fake admin account to run the tests since someone will have to expose their password to use this setup.
Note that you can set up 2-factor authentication on the admin account such that only one person can access it even if they know the password.
I support an application who call a CMD line to decrypt a file.
The application is a .exe file that is called by the Windows Task Scheduler and is execute as the same user who have all right.
The application run every week day in the evening at 6h30pm and sometimes the CMD line return the message: no secret key.
The application failed because the file was not decrypted. But it doesn't failed every evening, just random evening. It looks totally random.
And if I run the application myself after it failed with the same user, it worked.
The secret key is imported in Kleopatra and it work fine with other application that run in the morning. And it work fine when I used it.
What can cause this?
Thank you
We fix the problem. We must not log off the application user.
If we log off the user, one key is not working, but the others are working.
Some ideas to help you run down the problem:
Check the private keys available to the machine on which the application fails
gpg --list-secret-keys
(IIRC Kleopatra runs on top of GnuPG, so I assume your application does as well. I've been wrong before.) You might notice something out of place with your private (decryption) keys. For example, if the key is listed as either
sec#
ssb>
Then it's a (primary or sub respectively) key located on a smart card for storage. If the card, for whatever reason, isn't in the machine when the app runs it'll fail to decrypt.
Check the disk containing the private keyring is attached/inserted/mounted at the time the application ran and failed to decrypt. If the keys are stored on removable (or unreliable) media then that could also result in a failure to decrypt.
Check that the item failing to decrypt was encrypted properly. If there is some secondary recipient necessary for the app to run there may be a required key that you don't know about (I gather from your post you didn't create this app, just maintain it.) It may even be that the app is trying to decrypt a different file erroneously, but that kind of thing can only be found out by stepping through your source code and resident files.
Failing those, pray for #Jens Erat to notice your question.
We have a vendor that sends CSV files as email attachments. These CSV files contain statuses that are imported into our application. I'm trying to automate the process end-to-end, but it currently depends on someone opening an email, saving the attachment to a server share, so the application can use the file.
Since I cannot convince the vendor to change their process, such as offering an FTP location or a Web Service, I'm stuck with trying to automate the existing process.
Does anyone know of a way to programmatically open an email from a POP3 account and extract an attachment? The preferred solution would reside on a Windows 2003 server, be written VB.NET and secure. The application can reside on the same server as the POP3 server, for example, we could setup the free POP3 server that comes with Windows Server and pull against the mail file stored on the file system.
BTW, we are willing to pay for an off-the-shelf solution, if one exists.
Note: I did look at this question but the answer points to a CodeProject solution that doesn't deal with attachments.
Try Mail.dll email component, it's very affordable, supports attachments national characters and is easy to use, it also supports SSL:
Using pop3 As New Pop3()
pop3.Connect("mail.server.com")
pop3.Login("user", "password")
Dim builder As New MailBuilder()
For Each uid As String In pop3.GetAll()
' Receive email message'
Dim mail As IMail = builder.CreateFromEml(pop3.GetMessageByUID(uid))
'Write out received message'
Console.WriteLine(mail.Subject)
'Here you can use mail.Attachmets collection'
For Each attachment As MimeData In mail.Attachments
Console.WriteLine(attachment.FileName)
attachment.Save("c:\" + attachment.FileName)
' you can also use attachment.Data here'
Next attachment
Next
pop3.Close(true)
End Using
You can download it here: http://www.lesnikowski.com/mail.
possible duplication of Reading Email using Pop3 in C#
Atleast, there's a shed load of suggestions there that you may find useful
I'll throw in a late suggestion for a more generalized "download POP3 messages and extract attachments" solution using existing software and minimal programming. I needed to do this for a client who switched to receiving faxes via email and was not pleased with manually saving the attachments to a location where they could be imported into an application.
For downloading messages on *nix systems fetchmail seems to be the standard and is very capable, but I chose mpop for both simplicity and Windows compatibility (but it is cross-platform). If mpop hadn't done the trick for me, I probably would have ended up doing something with the Python-based getmail, which was created when fetchmail's development stalled for a time (it's since resumed).
Mpop is controlled either via command line or configuration file, so I simply created multiple configuration files and specify via command line which file to load. I'm using it in "Exchange pickup directory" mode, which means it simply downloads the messages and drops them as text (.eml) files in a specified directory.
For extraction of the message attachments, UUDeview appears to be the standard (I'm using the Windows port of UUDeview) across just about any system you could want with just about any features you could want. My main alternative to this was a much-less-capable Python script that I'd developed for a different client back in 2007, but I'm happy to go with a precompiled executable over either installing Python or packaging with any of the Python-to-exe options.
Finally there's the configuration - along with the two mpop configuration files mentioned above (which I could do away with by using command-line options), I also have two 2-line .cmd files launched every 10 minutes by scheduled task - the first line to launch mpop to download into a working directory and the second line to launch UUDeview and extract attachments of specified types (.pdf or .tif) then delete each file from which it extracted attachments. Output is sent to another directory from which staff can directly attach files as needed.
This is overall not the most elegant way to reach these ends, but it was quick, simple, functional and reasonably robust - at each stage if something goes wrong it fails such that no data is lost. The only places where data could be lost are any non-attachment messages being sent to the dedicated fax email addresses, and even those will sit in the processing directory and be caught eventually.