I have enabled the default policies, and I see that the table _aud-audit-data is saving system events: Login, logout, add or modify users, changes in policies, things like that.
But I need my ERP events to be saved. For example, deleting a client.
I'm new to auditing and I think I understand that this should be recorded in _aud-audit-data-value.
But it doesn't.
What should I do?
Just seen an specific chapter in the doc: "Developing an Audit-enabled OpenEdge Application"
Reading now...
You need to use the AUDIT-CONTROL system handle.
AUDIT-CONTROL:LOG-AUDIT-EVENT( 32000,
"This is the event context",
"This is the event detail",
"This is the user detail"
).
This knowledge base article describes this in detail
https://knowledgebase.progress.com/articles/Knowledge/P127541
Related
I'm getting started with Google Tag Manager for Android/iOS, and can't find a way to access the User ID as a variable. I can access Firebase User Properties and Event Parameters just fine.
So far, I've tried setting it using FirebaseAnalytics.setUserId and trying to access it as a User Property called user_id / userId.
Some workarounds I've thought of:
Using a CustomVariableProvider (preferred)
Setting the User ID as an Event Parameter (this wouldn't work with built-in events)
I'm just trying to make sure there's no built-in way of doing this before I resort to workarounds. Thanks!
I was not able to find the User ID (or UID) in the list of built-in variables, see this screenshot
There is a built-in way, but it requires quite a sophisticated setup.
In GA version 4 the path is changed comparing to the previous version, where the same could be done much easier via "Tracking Info".
Here are the starting steps in GA4:
Open https://analytics.google.com/analytics/web
Bottom-left corner -> Admin -> Setup Assistant -> Advanced setup -> User ID
Follow the instruction
After that UserID will be available in GTM.
Video guide for exact steps: https://www.youtube.com/watch?v=TVJMFVOXFUQ
We are trying to copy conference data from one event to other but it not working for non G-suite accounts. We are using Google.Apis.Calendar.v3 libraries for .net. Following is sample code :
Event firstEvent = service.Events.Get(calendarId, "eventId1").Execute();
secondEvent.ConferenceData = firstEvent.ConferenceData;
The same code works for G-suite accounts. Is there anything special that needs to be done for non Gsuite accounts or its not supported for them? May be we are missing something. Actually issue is instead of copy conference data it gives new conference data i.e new link, new signature even if same object is set to copy. It should give same link, same copy ConferenceData after creation, isn't it?
Any help will be appreciated. Thanks in advance!
References :
https://developers.google.com/calendar/create-events
https://developers.google.com/calendar/v3/reference/events/insert
This is an intended behavior. New events with attendees create a Conference automatically, so it's not possible to change it with the API. G Suite users don't have this limitation and can disable this option from the Admin console.
I've been attempting to log activity on a mobile-like device using the Google Analytics Measurement Protocol. All of these attempts have validated using the validation URL, and I can see activity when I look at the real-time reports on the Analytics website. But when I look at the Home or Overview reports for the day - no activity is shown.
The view is set for "All Mobile App Data".
The POST body looks something like this:
v=1&tid=UA-000000000-1&ds=app&qt=1601&uid=uid-zzzzz&t=screenview&cd=Foo&an=Foo%20App%20Name&aid=com.example.foo&aiid=com.example.foo&av=0.0.1&ua=Mozilla%2F5.0%20(Linux%3B%20Android%207.0%3B%20SM-G930V%20Build%2FNRD90M)%20AppleWebKit%2F537.36%20(KHTML%2C%20like%20Gecko)%20Chrome%2F59.0.3071.125%20Mobile%20Safari%2F537.36
The ua field is just a pre-defined string. I found that if I omitted it, the Real Time monitoring listed the hits as desktop hits, although I was in a Mobile report and the ds field was "app".
Am I missing a field that is required? Is there some reason why it is showing up in the real-time report, but not in a daily report? Is there some other way to diagnose why the data is vanishing, or confirm the data is actually being captured?
When i check the debug endpoint the hit is valid
Request:
https://www.google-analytics.com/debug/collect?v=1&tid=UA-XXX-1&ds=app&qt=1601&uid=uid-zzzzz&t=screenview&cd=Foo&an=Foo%20App%20Name&aid=com.example.foo&aiid=com.example.foo&av=0.0.1&ua=Mozilla%2F5.0%20(Linux%3B%20Android%207.0%3B%20SM-G930V%20Build%2FNRD90M)%20AppleWebKit%2F537.36%20(KHTML%2C%20like%20Gecko)%20Chrome%2F59.0.3071.125%20Mobile%20Safari%2F537.36
Response
{
"hitParsingResult": [ {
"valid": true,
"parserMessage": [ ],
"hit": "/debug/collect?v=1\u0026tid=UA-53766825-1\u0026ds=app\u0026qt=1601\u0026uid=uid-zzzzz\u0026t=screenview\u0026cd=Foo\u0026an=Foo%20App%20Name\u0026aid=com.example.foo\u0026aiid=com.example.foo\u0026av=0.0.1\u0026ua=Mozilla%2F5.0%20(Linux%3B%20Android%207.0%3B%20SM-G930V%20Build%2FNRD90M)%20AppleWebKit%2F537.36%20(KHTML%2C%20like%20Gecko)%20Chrome%2F59.0.3071.125%20Mobile%20Safari%2F537.36"
} ],
"parserMessage": [ {
"messageType": "INFO",
"description": "Found 1 hit in the request."
} ]
}
I cannot use one of the mobile libraries from Firebase - this is not one of the platforms they support. I do not wish to pretend this is a web page - there is no associated hostname or path. I do not wish to use Events since I can't do event Behavior Flow, which is one of the things I'm interested in seeing.
I'm aware that it can sometimes take "a day or so" for results to first appear. The site was setup over five days ago at this point, and has received data during that time.
Good thought about the anti-spam setting, however the setting appears to be correct:
I've also tried using GET instead of POST - no change, it still shows the hit in real-time, but then it vanishes.
However, I know that it can record hits permanently. There were two hits from a spammer in Russia that have shown up in the daily report (I wasn't there to see it show up in real-time). I don't know what they did, but would love to find out since it might help figure out how I can add a record.
In the real-time reports, it correctly points out the data center all the hits are coming from. Perhaps that is filtering it out somewhere out of my control?
Try adding Cid I know it says this is an optional parameter but for mobile accounts I belive it may be required.
Client ID
Optional.
This field is required if User ID (uid) is not specified in the request. This anonymously identifies a particular user, device, or browser instance. For the web, this is generally stored as a first-party cookie with a two-year expiration. For mobile apps, this is randomly generated for each particular instance of an application install. The value of this field should be a random UUID (version 4) as described in http://www.ietf.org/rfc/rfc4122.txt.
Example value: 35009a79-1a05-49d7-b876-2b884d0f825b
Although this says it needs to be a UUIDv4, it does work with other UUIDs (I've tested it with a v5, which is a hash against the value used for the uid parameter).
We have a notification which will post data to an application using the application end point.
notification ABC{
post = savedetailsurl
body = {{.|json}}
useBody = true
}
So the end point will save all the details in mysql DB.
Now in our template we call another end point to get the details which we saved using the webhook in notification.
template ABC {
use the " getDetailsUrl" and use the details in forming the email
}
Now the problem is race condition. Sometimes the details are not saved yet in the backend (mysql), and getDetailsUrl is called. So we get the empty result.
Is there are way to solve the race condition.
Bosun's notification system is designed to be very basic. If you want something more advanced you will need to use a separate system to generate the notification details and/or handle the alert workflow. Some people have used pagerduty or other monitoring systems like Shinken to do more advanced notifications or alert management.
Your best bet is to skip the built in notifications and do everything in a external system. You can still use the http://bosun.org/api to integrate with the various alert states (crit/warn/ack/close/etc) or you can change your alerts to use log = true to bypass all the built in states and create your own workflow.
We use PloneFormGen 1.7.12 using Plone 4.3.3. I have a request to include the current data in the email that the form is sending. We normally give editors access to the data to download, but the people he wants to send these to are not editors and I don't want to give them editor's permissions.
If it can't be added to the mailer, I guess I could create a role and give it just enough permissions for an authenticated user to download data. Would it work to copy the authenticated permissions over to a new role and add the PloneFormGen: Download Saved Input permission as well? I really don't like creating extra roles. In addition we would need to set up accounts for these people.
AFAIK not without coding :-)
Create a new DataSaveAdapter content type
Best way ist to inherit from the existing one and add a new field:
from Products.PloneFormGen.content.saveDataAdapter import FormSaveDataAdapter
SendDataAdapterSchema = FormSaveDataAdapter.schema.copy() + atapi.Schema((
atapi.StringField(
name='csv_recipients',
required=False,
widget=atapi.LinesWidget(
label=_(u'label_csv_recipients', default=u'CSV recipients'),
)
)
))
class SendDataAdapter(FormSaveDataAdapter):
implements(IPloneFormGenActionAdapter)
...
schema = SendDataAdapterSchema
...
The SaveDataAdapter provides a onSuccess method, where you can hook in and send your email
class SendDataAdapter(FormSaveDataAdapter):
...
def onSuccess(self, fields, REQUEST=None, loopstop=False):
""" saves input data and initiates mail"""
super(SendDataAdapter, self).onSuccess(fields, REQUEST, loopstop)
self.send_csv() # This is where you may implement sending the email.
Of course it needs some work to get it done (registering content type, etc.), but this should point you in the right direction.
Not really sure about your requirements, but in case you want to send the single-record in CSV-format as a mail when a form is submitted, you can customize the template of the mailer-adapter, like this:
<tal:block repeat="field options/wrappedFields | nothing">
"<span tal:replace="structure python:field.htmlValue(request)" />",
</tal:block>
Note, that this only works, if the mail's format is HTML, in plain text tal:repeat comes in the way, adding linebreaks between the values.
If you want to give a group of users permissions to view and download a save-adapter, go to PFG's controlpanel (append /prefs_pfg_permits to the site's URL), where it says "Download Saved Input" check the box for "Reader", then assign "Can edit"-permissioins via the sharing-tab of your save-adapter to the users and groups you want to be privileged.