Related
I am using R and I have two data frames: carrots and cucumbers. Each data frame has a single numeric column that lists the length of all measured carrots (total: 100k carrots) and cucumbers (total: 50k cucumbers).
I wish to plot two histograms - carrot length and cucumbers lengths - on the same plot. They overlap, so I guess I also need some transparency. I also need to use relative frequencies not absolute numbers since the number of instances in each group is different.
Something like this would be nice but I don't understand how to create it from my two tables:
Here is an even simpler solution using base graphics and alpha-blending (which does not work on all graphics devices):
set.seed(42)
p1 <- hist(rnorm(500,4)) # centered at 4
p2 <- hist(rnorm(500,6)) # centered at 6
plot( p1, col=rgb(0,0,1,1/4), xlim=c(0,10)) # first histogram
plot( p2, col=rgb(1,0,0,1/4), xlim=c(0,10), add=T) # second
The key is that the colours are semi-transparent.
Edit, more than two years later: As this just got an upvote, I figure I may as well add a visual of what the code produces as alpha-blending is so darn useful:
That image you linked to was for density curves, not histograms.
If you've been reading on ggplot then maybe the only thing you're missing is combining your two data frames into one long one.
So, let's start with something like what you have, two separate sets of data and combine them.
carrots <- data.frame(length = rnorm(100000, 6, 2))
cukes <- data.frame(length = rnorm(50000, 7, 2.5))
# Now, combine your two dataframes into one.
# First make a new column in each that will be
# a variable to identify where they came from later.
carrots$veg <- 'carrot'
cukes$veg <- 'cuke'
# and combine into your new data frame vegLengths
vegLengths <- rbind(carrots, cukes)
After that, which is unnecessary if your data is in long format already, you only need one line to make your plot.
ggplot(vegLengths, aes(length, fill = veg)) + geom_density(alpha = 0.2)
Now, if you really did want histograms the following will work. Note that you must change position from the default "stack" argument. You might miss that if you don't really have an idea of what your data should look like. A higher alpha looks better there. Also note that I made it density histograms. It's easy to remove the y = ..density.. to get it back to counts.
ggplot(vegLengths, aes(length, fill = veg)) +
geom_histogram(alpha = 0.5, aes(y = ..density..), position = 'identity')
On additional thing, I commented on Dirk's question that all of the arguments could simply be in the hist command. I was asked how that could be done. What follows produces exactly Dirk's figure.
set.seed(42)
hist(rnorm(500,4), col=rgb(0,0,1,1/4), xlim=c(0,10))
hist(rnorm(500,6), col=rgb(1,0,0,1/4), xlim=c(0,10), add = TRUE)
Here's a function I wrote that uses pseudo-transparency to represent overlapping histograms
plotOverlappingHist <- function(a, b, colors=c("white","gray20","gray50"),
breaks=NULL, xlim=NULL, ylim=NULL){
ahist=NULL
bhist=NULL
if(!(is.null(breaks))){
ahist=hist(a,breaks=breaks,plot=F)
bhist=hist(b,breaks=breaks,plot=F)
} else {
ahist=hist(a,plot=F)
bhist=hist(b,plot=F)
dist = ahist$breaks[2]-ahist$breaks[1]
breaks = seq(min(ahist$breaks,bhist$breaks),max(ahist$breaks,bhist$breaks),dist)
ahist=hist(a,breaks=breaks,plot=F)
bhist=hist(b,breaks=breaks,plot=F)
}
if(is.null(xlim)){
xlim = c(min(ahist$breaks,bhist$breaks),max(ahist$breaks,bhist$breaks))
}
if(is.null(ylim)){
ylim = c(0,max(ahist$counts,bhist$counts))
}
overlap = ahist
for(i in 1:length(overlap$counts)){
if(ahist$counts[i] > 0 & bhist$counts[i] > 0){
overlap$counts[i] = min(ahist$counts[i],bhist$counts[i])
} else {
overlap$counts[i] = 0
}
}
plot(ahist, xlim=xlim, ylim=ylim, col=colors[1])
plot(bhist, xlim=xlim, ylim=ylim, col=colors[2], add=T)
plot(overlap, xlim=xlim, ylim=ylim, col=colors[3], add=T)
}
Here's another way to do it using R's support for transparent colors
a=rnorm(1000, 3, 1)
b=rnorm(1000, 6, 1)
hist(a, xlim=c(0,10), col="red")
hist(b, add=T, col=rgb(0, 1, 0, 0.5) )
The results end up looking something like this:
Already beautiful answers are there, but I thought of adding this. Looks good to me.
(Copied random numbers from #Dirk). library(scales) is needed`
set.seed(42)
hist(rnorm(500,4),xlim=c(0,10),col='skyblue',border=F)
hist(rnorm(500,6),add=T,col=scales::alpha('red',.5),border=F)
The result is...
Update: This overlapping function may also be useful to some.
hist0 <- function(...,col='skyblue',border=T) hist(...,col=col,border=border)
I feel result from hist0 is prettier to look than hist
hist2 <- function(var1, var2,name1='',name2='',
breaks = min(max(length(var1), length(var2)),20),
main0 = "", alpha0 = 0.5,grey=0,border=F,...) {
library(scales)
colh <- c(rgb(0, 1, 0, alpha0), rgb(1, 0, 0, alpha0))
if(grey) colh <- c(alpha(grey(0.1,alpha0)), alpha(grey(0.9,alpha0)))
max0 = max(var1, var2)
min0 = min(var1, var2)
den1_max <- hist(var1, breaks = breaks, plot = F)$density %>% max
den2_max <- hist(var2, breaks = breaks, plot = F)$density %>% max
den_max <- max(den2_max, den1_max)*1.2
var1 %>% hist0(xlim = c(min0 , max0) , breaks = breaks,
freq = F, col = colh[1], ylim = c(0, den_max), main = main0,border=border,...)
var2 %>% hist0(xlim = c(min0 , max0), breaks = breaks,
freq = F, col = colh[2], ylim = c(0, den_max), add = T,border=border,...)
legend(min0,den_max, legend = c(
ifelse(nchar(name1)==0,substitute(var1) %>% deparse,name1),
ifelse(nchar(name2)==0,substitute(var2) %>% deparse,name2),
"Overlap"), fill = c('white','white', colh[1]), bty = "n", cex=1,ncol=3)
legend(min0,den_max, legend = c(
ifelse(nchar(name1)==0,substitute(var1) %>% deparse,name1),
ifelse(nchar(name2)==0,substitute(var2) %>% deparse,name2),
"Overlap"), fill = c(colh, colh[2]), bty = "n", cex=1,ncol=3) }
The result of
par(mar=c(3, 4, 3, 2) + 0.1)
set.seed(100)
hist2(rnorm(10000,2),rnorm(10000,3),breaks = 50)
is
Here is an example of how you can do it in "classic" R graphics:
## generate some random data
carrotLengths <- rnorm(1000,15,5)
cucumberLengths <- rnorm(200,20,7)
## calculate the histograms - don't plot yet
histCarrot <- hist(carrotLengths,plot = FALSE)
histCucumber <- hist(cucumberLengths,plot = FALSE)
## calculate the range of the graph
xlim <- range(histCucumber$breaks,histCarrot$breaks)
ylim <- range(0,histCucumber$density,
histCarrot$density)
## plot the first graph
plot(histCarrot,xlim = xlim, ylim = ylim,
col = rgb(1,0,0,0.4),xlab = 'Lengths',
freq = FALSE, ## relative, not absolute frequency
main = 'Distribution of carrots and cucumbers')
## plot the second graph on top of this
opar <- par(new = FALSE)
plot(histCucumber,xlim = xlim, ylim = ylim,
xaxt = 'n', yaxt = 'n', ## don't add axes
col = rgb(0,0,1,0.4), add = TRUE,
freq = FALSE) ## relative, not absolute frequency
## add a legend in the corner
legend('topleft',c('Carrots','Cucumbers'),
fill = rgb(1:0,0,0:1,0.4), bty = 'n',
border = NA)
par(opar)
The only issue with this is that it looks much better if the histogram breaks are aligned, which may have to be done manually (in the arguments passed to hist).
Here's the version like the ggplot2 one I gave only in base R. I copied some from #nullglob.
generate the data
carrots <- rnorm(100000,5,2)
cukes <- rnorm(50000,7,2.5)
You don't need to put it into a data frame like with ggplot2. The drawback of this method is that you have to write out a lot more of the details of the plot. The advantage is that you have control over more details of the plot.
## calculate the density - don't plot yet
densCarrot <- density(carrots)
densCuke <- density(cukes)
## calculate the range of the graph
xlim <- range(densCuke$x,densCarrot$x)
ylim <- range(0,densCuke$y, densCarrot$y)
#pick the colours
carrotCol <- rgb(1,0,0,0.2)
cukeCol <- rgb(0,0,1,0.2)
## plot the carrots and set up most of the plot parameters
plot(densCarrot, xlim = xlim, ylim = ylim, xlab = 'Lengths',
main = 'Distribution of carrots and cucumbers',
panel.first = grid())
#put our density plots in
polygon(densCarrot, density = -1, col = carrotCol)
polygon(densCuke, density = -1, col = cukeCol)
## add a legend in the corner
legend('topleft',c('Carrots','Cucumbers'),
fill = c(carrotCol, cukeCol), bty = 'n',
border = NA)
#Dirk Eddelbuettel: The basic idea is excellent but the code as shown can be improved. [Takes long to explain, hence a separate answer and not a comment.]
The hist() function by default draws plots, so you need to add the plot=FALSE option. Moreover, it is clearer to establish the plot area by a plot(0,0,type="n",...) call in which you can add the axis labels, plot title etc. Finally, I would like to mention that one could also use shading to distinguish between the two histograms. Here is the code:
set.seed(42)
p1 <- hist(rnorm(500,4),plot=FALSE)
p2 <- hist(rnorm(500,6),plot=FALSE)
plot(0,0,type="n",xlim=c(0,10),ylim=c(0,100),xlab="x",ylab="freq",main="Two histograms")
plot(p1,col="green",density=10,angle=135,add=TRUE)
plot(p2,col="blue",density=10,angle=45,add=TRUE)
And here is the result (a bit too wide because of RStudio :-) ):
Plotly's R API might be useful for you. The graph below is here.
library(plotly)
#add username and key
p <- plotly(username="Username", key="API_KEY")
#generate data
x0 = rnorm(500)
x1 = rnorm(500)+1
#arrange your graph
data0 = list(x=x0,
name = "Carrots",
type='histogramx',
opacity = 0.8)
data1 = list(x=x1,
name = "Cukes",
type='histogramx',
opacity = 0.8)
#specify type as 'overlay'
layout <- list(barmode='overlay',
plot_bgcolor = 'rgba(249,249,251,.85)')
#format response, and use 'browseURL' to open graph tab in your browser.
response = p$plotly(data0, data1, kwargs=list(layout=layout))
url = response$url
filename = response$filename
browseURL(response$url)
Full disclosure: I'm on the team.
So many great answers but since I've just written a function (plotMultipleHistograms() in 'basicPlotteR' package) function to do this, I thought I would add another answer.
The advantage of this function is that it automatically sets appropriate X and Y axis limits and defines a common set of bins that it uses across all the distributions.
Here's how to use it:
# Install the plotteR package
install.packages("devtools")
devtools::install_github("JosephCrispell/basicPlotteR")
library(basicPlotteR)
# Set the seed
set.seed(254534)
# Create random samples from a normal distribution
distributions <- list(rnorm(500, mean=5, sd=0.5),
rnorm(500, mean=8, sd=5),
rnorm(500, mean=20, sd=2))
# Plot overlapping histograms
plotMultipleHistograms(distributions, nBins=20,
colours=c(rgb(1,0,0, 0.5), rgb(0,0,1, 0.5), rgb(0,1,0, 0.5)),
las=1, main="Samples from normal distribution", xlab="Value")
The plotMultipleHistograms() function can take any number of distributions, and all the general plotting parameters should work with it (for example: las, main, etc.).
Please forgive the naïve question as I am new to R. I have generated a forest plot using a code that I saw and adapted on R bloggers. I would like to add a footnote but I'm not sure how to do it. I've seen different codes but I don't know which one is appropriate. Any advice is much appreciated! Thanks!
The forest plot code is below:
library(ggplot2)
library(grid)
library(gridExtra)
library(xtable)
library(plyr)
library(MASS)
library(reshape2)
d1 <- read.csv("/view/name_view/vob/folder/subfolder/forestTAF.csv", stringsAsFactors=FALSE)
#Format data so column labels and columns match required graphical output
subgps <- c(4,5,8,9,12,13,16,17,20,21,24,25,28,29)
#Combine the rest of the columns in the table
tabletext <- cbind(c("Change due to", d1$Variable),
c("PK Measures", d1$PK.Measures),
c("Recommendation", d1$Recommendation))
#Load forestplot package
library(forestplot)
#Create forest plot
png(filename="forestTAF.png",width=1600, height=640)
forestplot(labeltext=tabletext, graph.pos=3, align=c("l", "c", "l"),
mean=c(NA,d1$Point.Estimate),
lower=c(NA,d1$Low), upper=c(NA,d1$High),
title="Drugname \nFold Change and 90% CI",
xlab="Change Relative to Reference (i.e., without interaction)",
txt_gp=fpTxtGp(label=gpar(cex=1.25),
ticks=gpar(cex=1.1),
xlab=gpar(cex = 1.2),
title=gpar(cex = 1.2)),
col=fpColors(box="black", lines="black"),
zero=1, cex=0.9, lineheight = "auto", boxsize=0.5, colgap=unit(6,"mm"),
lwd.ci=2, ci.vertices=TRUE, ci.vertices.height = 0.4)
grid::gridtext is one option
library('forestplot')
## ?forestplot
row_names <- list(list("test = 1", expression(test >= 2)))
test_data <- data.frame(coef=c(1.59, 1.24),
low=c(1.4, 0.78),
high=c(1.8, 1.55))
forestplot(row_names, test_data$coef, test_data$low, test_data$high,
zero = 1, cex = 2, lineheight = "auto", xlab = "Lab axis txt")
grid::grid.text where "npc" in grid::unit is the normalized 0,1 coordinate so .05 will be 5% across the image
x <- unit(.05, 'npc')
y <- unit(.05, 'npc')
grid.text('A footnote', x, y, gp = gpar(fontsize=10, font = 3))
Alternatively, you can use grid::grid.locator which allows you to point and click the position you would like.
g <- grid.locator('npc')
grid.text('A footnote', g$x, g$y, gp = gpar(fontsize=10, font = 3))
I am using R and I have two data frames: carrots and cucumbers. Each data frame has a single numeric column that lists the length of all measured carrots (total: 100k carrots) and cucumbers (total: 50k cucumbers).
I wish to plot two histograms - carrot length and cucumbers lengths - on the same plot. They overlap, so I guess I also need some transparency. I also need to use relative frequencies not absolute numbers since the number of instances in each group is different.
Something like this would be nice but I don't understand how to create it from my two tables:
Here is an even simpler solution using base graphics and alpha-blending (which does not work on all graphics devices):
set.seed(42)
p1 <- hist(rnorm(500,4)) # centered at 4
p2 <- hist(rnorm(500,6)) # centered at 6
plot( p1, col=rgb(0,0,1,1/4), xlim=c(0,10)) # first histogram
plot( p2, col=rgb(1,0,0,1/4), xlim=c(0,10), add=T) # second
The key is that the colours are semi-transparent.
Edit, more than two years later: As this just got an upvote, I figure I may as well add a visual of what the code produces as alpha-blending is so darn useful:
That image you linked to was for density curves, not histograms.
If you've been reading on ggplot then maybe the only thing you're missing is combining your two data frames into one long one.
So, let's start with something like what you have, two separate sets of data and combine them.
carrots <- data.frame(length = rnorm(100000, 6, 2))
cukes <- data.frame(length = rnorm(50000, 7, 2.5))
# Now, combine your two dataframes into one.
# First make a new column in each that will be
# a variable to identify where they came from later.
carrots$veg <- 'carrot'
cukes$veg <- 'cuke'
# and combine into your new data frame vegLengths
vegLengths <- rbind(carrots, cukes)
After that, which is unnecessary if your data is in long format already, you only need one line to make your plot.
ggplot(vegLengths, aes(length, fill = veg)) + geom_density(alpha = 0.2)
Now, if you really did want histograms the following will work. Note that you must change position from the default "stack" argument. You might miss that if you don't really have an idea of what your data should look like. A higher alpha looks better there. Also note that I made it density histograms. It's easy to remove the y = ..density.. to get it back to counts.
ggplot(vegLengths, aes(length, fill = veg)) +
geom_histogram(alpha = 0.5, aes(y = ..density..), position = 'identity')
On additional thing, I commented on Dirk's question that all of the arguments could simply be in the hist command. I was asked how that could be done. What follows produces exactly Dirk's figure.
set.seed(42)
hist(rnorm(500,4), col=rgb(0,0,1,1/4), xlim=c(0,10))
hist(rnorm(500,6), col=rgb(1,0,0,1/4), xlim=c(0,10), add = TRUE)
Here's a function I wrote that uses pseudo-transparency to represent overlapping histograms
plotOverlappingHist <- function(a, b, colors=c("white","gray20","gray50"),
breaks=NULL, xlim=NULL, ylim=NULL){
ahist=NULL
bhist=NULL
if(!(is.null(breaks))){
ahist=hist(a,breaks=breaks,plot=F)
bhist=hist(b,breaks=breaks,plot=F)
} else {
ahist=hist(a,plot=F)
bhist=hist(b,plot=F)
dist = ahist$breaks[2]-ahist$breaks[1]
breaks = seq(min(ahist$breaks,bhist$breaks),max(ahist$breaks,bhist$breaks),dist)
ahist=hist(a,breaks=breaks,plot=F)
bhist=hist(b,breaks=breaks,plot=F)
}
if(is.null(xlim)){
xlim = c(min(ahist$breaks,bhist$breaks),max(ahist$breaks,bhist$breaks))
}
if(is.null(ylim)){
ylim = c(0,max(ahist$counts,bhist$counts))
}
overlap = ahist
for(i in 1:length(overlap$counts)){
if(ahist$counts[i] > 0 & bhist$counts[i] > 0){
overlap$counts[i] = min(ahist$counts[i],bhist$counts[i])
} else {
overlap$counts[i] = 0
}
}
plot(ahist, xlim=xlim, ylim=ylim, col=colors[1])
plot(bhist, xlim=xlim, ylim=ylim, col=colors[2], add=T)
plot(overlap, xlim=xlim, ylim=ylim, col=colors[3], add=T)
}
Here's another way to do it using R's support for transparent colors
a=rnorm(1000, 3, 1)
b=rnorm(1000, 6, 1)
hist(a, xlim=c(0,10), col="red")
hist(b, add=T, col=rgb(0, 1, 0, 0.5) )
The results end up looking something like this:
Already beautiful answers are there, but I thought of adding this. Looks good to me.
(Copied random numbers from #Dirk). library(scales) is needed`
set.seed(42)
hist(rnorm(500,4),xlim=c(0,10),col='skyblue',border=F)
hist(rnorm(500,6),add=T,col=scales::alpha('red',.5),border=F)
The result is...
Update: This overlapping function may also be useful to some.
hist0 <- function(...,col='skyblue',border=T) hist(...,col=col,border=border)
I feel result from hist0 is prettier to look than hist
hist2 <- function(var1, var2,name1='',name2='',
breaks = min(max(length(var1), length(var2)),20),
main0 = "", alpha0 = 0.5,grey=0,border=F,...) {
library(scales)
colh <- c(rgb(0, 1, 0, alpha0), rgb(1, 0, 0, alpha0))
if(grey) colh <- c(alpha(grey(0.1,alpha0)), alpha(grey(0.9,alpha0)))
max0 = max(var1, var2)
min0 = min(var1, var2)
den1_max <- hist(var1, breaks = breaks, plot = F)$density %>% max
den2_max <- hist(var2, breaks = breaks, plot = F)$density %>% max
den_max <- max(den2_max, den1_max)*1.2
var1 %>% hist0(xlim = c(min0 , max0) , breaks = breaks,
freq = F, col = colh[1], ylim = c(0, den_max), main = main0,border=border,...)
var2 %>% hist0(xlim = c(min0 , max0), breaks = breaks,
freq = F, col = colh[2], ylim = c(0, den_max), add = T,border=border,...)
legend(min0,den_max, legend = c(
ifelse(nchar(name1)==0,substitute(var1) %>% deparse,name1),
ifelse(nchar(name2)==0,substitute(var2) %>% deparse,name2),
"Overlap"), fill = c('white','white', colh[1]), bty = "n", cex=1,ncol=3)
legend(min0,den_max, legend = c(
ifelse(nchar(name1)==0,substitute(var1) %>% deparse,name1),
ifelse(nchar(name2)==0,substitute(var2) %>% deparse,name2),
"Overlap"), fill = c(colh, colh[2]), bty = "n", cex=1,ncol=3) }
The result of
par(mar=c(3, 4, 3, 2) + 0.1)
set.seed(100)
hist2(rnorm(10000,2),rnorm(10000,3),breaks = 50)
is
Here is an example of how you can do it in "classic" R graphics:
## generate some random data
carrotLengths <- rnorm(1000,15,5)
cucumberLengths <- rnorm(200,20,7)
## calculate the histograms - don't plot yet
histCarrot <- hist(carrotLengths,plot = FALSE)
histCucumber <- hist(cucumberLengths,plot = FALSE)
## calculate the range of the graph
xlim <- range(histCucumber$breaks,histCarrot$breaks)
ylim <- range(0,histCucumber$density,
histCarrot$density)
## plot the first graph
plot(histCarrot,xlim = xlim, ylim = ylim,
col = rgb(1,0,0,0.4),xlab = 'Lengths',
freq = FALSE, ## relative, not absolute frequency
main = 'Distribution of carrots and cucumbers')
## plot the second graph on top of this
opar <- par(new = FALSE)
plot(histCucumber,xlim = xlim, ylim = ylim,
xaxt = 'n', yaxt = 'n', ## don't add axes
col = rgb(0,0,1,0.4), add = TRUE,
freq = FALSE) ## relative, not absolute frequency
## add a legend in the corner
legend('topleft',c('Carrots','Cucumbers'),
fill = rgb(1:0,0,0:1,0.4), bty = 'n',
border = NA)
par(opar)
The only issue with this is that it looks much better if the histogram breaks are aligned, which may have to be done manually (in the arguments passed to hist).
Here's the version like the ggplot2 one I gave only in base R. I copied some from #nullglob.
generate the data
carrots <- rnorm(100000,5,2)
cukes <- rnorm(50000,7,2.5)
You don't need to put it into a data frame like with ggplot2. The drawback of this method is that you have to write out a lot more of the details of the plot. The advantage is that you have control over more details of the plot.
## calculate the density - don't plot yet
densCarrot <- density(carrots)
densCuke <- density(cukes)
## calculate the range of the graph
xlim <- range(densCuke$x,densCarrot$x)
ylim <- range(0,densCuke$y, densCarrot$y)
#pick the colours
carrotCol <- rgb(1,0,0,0.2)
cukeCol <- rgb(0,0,1,0.2)
## plot the carrots and set up most of the plot parameters
plot(densCarrot, xlim = xlim, ylim = ylim, xlab = 'Lengths',
main = 'Distribution of carrots and cucumbers',
panel.first = grid())
#put our density plots in
polygon(densCarrot, density = -1, col = carrotCol)
polygon(densCuke, density = -1, col = cukeCol)
## add a legend in the corner
legend('topleft',c('Carrots','Cucumbers'),
fill = c(carrotCol, cukeCol), bty = 'n',
border = NA)
#Dirk Eddelbuettel: The basic idea is excellent but the code as shown can be improved. [Takes long to explain, hence a separate answer and not a comment.]
The hist() function by default draws plots, so you need to add the plot=FALSE option. Moreover, it is clearer to establish the plot area by a plot(0,0,type="n",...) call in which you can add the axis labels, plot title etc. Finally, I would like to mention that one could also use shading to distinguish between the two histograms. Here is the code:
set.seed(42)
p1 <- hist(rnorm(500,4),plot=FALSE)
p2 <- hist(rnorm(500,6),plot=FALSE)
plot(0,0,type="n",xlim=c(0,10),ylim=c(0,100),xlab="x",ylab="freq",main="Two histograms")
plot(p1,col="green",density=10,angle=135,add=TRUE)
plot(p2,col="blue",density=10,angle=45,add=TRUE)
And here is the result (a bit too wide because of RStudio :-) ):
Plotly's R API might be useful for you. The graph below is here.
library(plotly)
#add username and key
p <- plotly(username="Username", key="API_KEY")
#generate data
x0 = rnorm(500)
x1 = rnorm(500)+1
#arrange your graph
data0 = list(x=x0,
name = "Carrots",
type='histogramx',
opacity = 0.8)
data1 = list(x=x1,
name = "Cukes",
type='histogramx',
opacity = 0.8)
#specify type as 'overlay'
layout <- list(barmode='overlay',
plot_bgcolor = 'rgba(249,249,251,.85)')
#format response, and use 'browseURL' to open graph tab in your browser.
response = p$plotly(data0, data1, kwargs=list(layout=layout))
url = response$url
filename = response$filename
browseURL(response$url)
Full disclosure: I'm on the team.
So many great answers but since I've just written a function (plotMultipleHistograms() in 'basicPlotteR' package) function to do this, I thought I would add another answer.
The advantage of this function is that it automatically sets appropriate X and Y axis limits and defines a common set of bins that it uses across all the distributions.
Here's how to use it:
# Install the plotteR package
install.packages("devtools")
devtools::install_github("JosephCrispell/basicPlotteR")
library(basicPlotteR)
# Set the seed
set.seed(254534)
# Create random samples from a normal distribution
distributions <- list(rnorm(500, mean=5, sd=0.5),
rnorm(500, mean=8, sd=5),
rnorm(500, mean=20, sd=2))
# Plot overlapping histograms
plotMultipleHistograms(distributions, nBins=20,
colours=c(rgb(1,0,0, 0.5), rgb(0,0,1, 0.5), rgb(0,1,0, 0.5)),
las=1, main="Samples from normal distribution", xlab="Value")
The plotMultipleHistograms() function can take any number of distributions, and all the general plotting parameters should work with it (for example: las, main, etc.).
While working in GeoDa on a data set of the US Census Shapefiles I can quickly create a connectivity histogram shown below:
Assuming that my data is sourced in the following manner:
# Download an read US state shapefiles
tmp_shps <- tempfile(); tmp_dir <- tempdir()
download.file("http://www2.census.gov/geo/tiger/GENZ2014/shp/cb_2014_us_state_20m.zip",
tmp_shps)
unzip(tmp_shps, exdir = tmp_dir)
# Libs
require(rgdal); require(ggplot2)
# Read
us_shps <- readOGR(dsn = tmp_dir, layer = "cb_2014_us_state_20m")
How can I arrive at a similar connectivity histogram in R? Addittionally, I would be interested in creating a meanigful histogram derived from distance matrix created in the following manner:
require(geospacom)
dzs_distmat <- DistanceMatrix(poly = us_shps, id = "GEOID",
unit = 1000, longlat = TRUE, fun = distHaversine)
In practice, I'm interested in achieving the following objectives:
Summarising how often geographies border one another, ideally through a connectivity histogram shown above
Summarising information on distances amongst geographies
I played around with it a bit. This seems to be a start.
For your second point. Can you be more specific? I guess a simple histogram or density plot would summarise just fine? I.e. something like:
dists <- dzs_distmat[lower.tri(dzs_distmat)]
hist(dists, xlab = "Dist",
main = "Histogram of distances",
col = "grey")
abline(v = mean(dists), col = "red", lwd = 2)
Regarding your first point, the following should be a very non-fancy version of the histogram you present. (But it doesn't look like it very much?!) It should be a histogram of the number of touching neighbours following this post.
library("rgeos")
# Get adjencency matrix
adj <- gTouches(us_shps, byid = TRUE)
# Add names
tmp <- as.data.frame(us_shps)$STATEFP
dimnames(adj) <- list(tmp, tmp)
# Check names
stopifnot(all(rownames(adj) == rownames(dzs_distmat))) # Sanity check
hist(rowSums(adj), col = "grey", main = "Number of neighbours",
breaks = seq(-0.5, 8.5, by = 1))
I guess the fancy colours can be added relatively easily.
Using spdep you could identify the spatial neighbors of the regions using the the poly2nb function and then plot the histogram using the card function. Ex:
nb_q <- poly2nb(us_shp, queen = T)
hist(card(nb_q), col = "grey", main = "Number of neighbours", breaks = seq(-0.5, 8.5, by = 1))
I searched a lot of questions about heatmap throughout the site and packages, but I still have a problem.
I have clustered data (kmeans/EM/DBscan..), and I want to create a heatmap by grouping the same cluster. I want the similar color patterns to be grouped in the heatmap, so generally, it looks like a block-diagonal.
I tried to order the data by the cluster number and display it,
k = kmeans(data, 3)
d = data.frame(data)
d = data.frame(d, k$cluster)
d = d[order(d$k.cluster),]
heatmap(as.matrix(d))
but it is still not sorted and looks like this link: But, I want it to be sorted by its cluster number and looked like this:
Can I do this in R?
I searched lots of packages and tried many ways, but I still have a problem.
Thanks a lot.
You can do this using reshape2 and ggplot2 as follows:
library(reshape2)
library(ggplot2)
# Create dummy data
set.seed(123)
df <- data.frame(
a = sample(1:5, 1000, replace=TRUE),
b = sample(1:5, 1000, replace=TRUE),
c = sample(1:5, 1000, replace=TRUE)
)
# Perform clustering
k <- kmeans(df, 3)
# Append id and cluster
dfc <- cbind(df, id=seq(nrow(df)), cluster=k$cluster)
# Add idsort, the id number ordered by cluster
dfc$idsort <- dfc$id[order(dfc$cluster)]
dfc$idsort <- order(dfc$idsort)
# use reshape2::melt to create data.frame in long format
dfm <- melt(dfc, id.vars=c("id", "idsort"))
ggplot(dfm, aes(x=variable, y=idsort)) + geom_tile(aes(fill=value))
You should set Rowv and Colv to NA if you don't want the dendrograms and the subseuent ordering. BTW, You should also put of the scaling. Using the df of Andrie :
heatmap(as.matrix(df)[order(k$cluster),],Rowv=NA,Colv=NA,scale="none",labRow=NA)
In fact, this whole heatmap is based on image(). You can hack away using image to construct a plot exactly like you want. Heatmap is using layout() internally, so it will be diffucult to set the margins. With image you could do eg :
myHeatmap <- function(x,ord,xlab="",ylab="",main="My Heatmap",
col=heat.colors(5), ...){
op <- par(mar=c(3,0,2,0)+0.1)
on.exit(par(op))
nc <- NCOL(x)
nr <- NROW(x)
labCol <- names(x)
x <- t(x[ord,])
image(1L:nc, 1L:nr, x, xlim = 0.5 + c(0, nc), ylim = 0.5 +
c(0, nr), axes = FALSE, xlab=xlab, ylab=ylab, main=main,
col=col,...)
axis(1, 1L:nc, labels = labCol, las = 2, line = -0.5, tick = 0)
axis(2, 1L:nr, labels = NA, las = 2, line = -0.5, tick = 0)
}
library(RColorBrewer)
myHeatmap(df,order(k$cluster),col=brewer.pal(5,"BuGn"))
To produce a plot that has less margins on the side. You can also manipulate axes, colors, ... You should definitely take a look at the RColorBrewerpackage
(This custom function is based on the internal plotting used by heatmap btw, simplified for the illustration and to get rid of all the dendrogram stuff)