I'm new to Teradata Studio and have used SQL Assistant in the past. I can find no way of showing multiple result set windows.
Googling refers to a button to switch from tab to sash display - which looks as if it might be what I want, but that button does not exist on my toolbar.
I'm trying to make Studio do what SQL Assistant does.
to have multiple answerset you have to :
=> run the query and right click on th result cell with the mouse and choose "Do not Close"
the next query that you excute will display an other answerset
if you want to excute a third query then you have to do the same thing
Related
Im trying to write queries on Azure Workbook so that I can run queries on our logs, which would allow me to drill down and view exactly what the exception message is. While doing so, when I execute a KQL query, on the workbooks, the column values are truncated as shown in picture. I want to be able to see the full error stack in order to troubleshoot the issue. Now I can get the operation_Id from here and then run it in Log Analytics to view full details, but I would like to view everything I need on this single page within Azure WorkBook. Clicking on the column doesn't expand it.
You cannot expand a particular column when you execute a kql query on the workbooks.
If you change the visualization to Text you will be able to see the complete stack error message as show in the below image
There are many ways to do something like this in workbooks, but the grid we use doesn't have the ability to expand a single cell like the logs view does.
As another answer states, you could use the "text" visualization to visualize just one cell (0,0) as a text block, but that only works for once cell queries.
or, in the grid settings you can set the column renderer to be a link for those columns, and have that link open the "cell details" view. that will open up a side pane that shows all the content of the cell in a popup view
or you could pick the "generic details" option which will open a side popup showing the values of all the columns in that row)
or, you can go into advanced settings, and enable the option to export parameters when a row is selected. you can then set it to export specific columns as specific named parameters, and use those parameters downstream to see values in something like a markdown text item in the workbook, or in a subsequent query.
there are examples of things like that documented here: https://github.com/microsoft/Application-Insights-Workbooks/blob/master/Documentation/Interactivity.md
Is there a way to extract a table from a web page in Automation Anywhere after taking certain steps using web recorder. The table does not appear directly, it appears after clicking few controls after launching the URL.
The table that I want to extract is coming after loggin in to the website and filtering using a control for search criteria.
I used web recorder to login and putting the desired search criteria in a text field and I want to extract the table now. When I use web recorder, it launches the URL again and takes me back to the login page which I dont want. I want the bot to stay on the page. Pls help.
Also, what is the significance of session name of an extracted table?
If you clicked on Advanced View, you will find at Step 5 : to run this command using an existing IE window. Try to write the URL of the page with the table and not the one of the login page.
The extracted table is to be used using variable $Table Column(Index)$ with index being the column number or column name
you can export directly using object cloning and in the selection criteria export to csv file. But we need to click on html inner text also in search criteria
An old question, but my experience has been the Extract Data/Table commands are rather poor. Not only do they only work in IE, you cannot call them as commands, they have to be called via a web recording.
Instead, I've found it much more useful to object clone the initial element, grab the DOMXPath, and variablize that. Then throw it into a loop while command and set the condition on finding at least one element (of the elements for the table you are trying to build). You can grab all sorts of useful info in the object clone command and then right that to a variable/table.
For example
//div[#id='updatable-standings']/div[1]/div[1]/div[2]/div[1]/table[1]/tbody[1]/tr[3]/td[2]/div[1]/span[2]
//div[#id='updatable-standings']/div[1]/div[1]/div[2]/div[1]/table[1]/tbody[1]/tr[4]/td[2]/div[1]/span[2]
I can create a incremental variable for {tr[3]} and call it $vTeamLoop$ and change my DOMXPath value in the Object Clone to be
//div[#id='updatable-standings']/div[1]/div[1]/div[2]/div[1]/table[1]/tbody[1]/tr[$vTeamLoop$]/td[2]/div[1]/span[2]
Ultimately, it is more steps than the Data/Table Extract command, but it is far less limited in scope.
Hope that helps.
enter code here
I am trying to insert a value into a table and i am getting an error 3022(It says that there might be a problem with a relation, a key or index). I have not created the table myself but i found out the specific column that triggers the error. I have checked that its not a key, index and there is not a relation to that table that depends on that specific column.
Is there anything i can do to avoid that error?
Thanks in advance.
No offense intended, but I tend to believe the application. There must be an index or a relation that you believe is innocuous but is actually the cause of the error. Therefore, I recommend the following:
In Access, with all tables closed, click the "Database Tools" tab on the ribbon and then click the "Database Documenter" button in the "Analyze" section of the ribbon bar. In the dialog box that appears, place a checkmark beside the table in question and then click the "Options..." button. In the options dialog, make sure that the highest level of detail is selected:
Click "OK" to close the Print Table Definition dialog, then click "OK" again to run the Documenter report.
Study the report carefully. If you don't see the cause of your error then, in the "Data" section of the ribbon, click "PDF or XPS". Save the report as PDF, upload the PDF to a site like wikisend.com, and then post the link here so we can retrieve the report.
Oh, and update your question to tell us exactly how you are trying to insert the data, and in what field(s). If you are using an INSERT query, post the actual SQL code you are trying to use.
[Thanks to Filburt and Devjosh. I have restructured the post and included my attempt approach. ]
I have a table on my SQL DB call ReportList which is a list of report. I need to go through that list and interrogate the reportserver, eport by report, to populate a table called ReportParameters. The ReportParameters table has a column for ReportOwnerID which needs to contains the ReportID value of the corresponding (owner) report as listed in the ReportList table.
This is in VB.NET 2005 ASP2.0 and I have ended up with a mess. Please help me with the cleanest approach to doing this.
It needs to work so:- I have a listbox of the reports as per REportList and a GridView that list all the parameters (uniquely - most of the parameters are common to many reports) the idea being that the parameters get set once and the report can be kicked off by selecting them in the ReportList CheckListBox and clicking on Execute.
I would like it that as I click on a particular report in the ListView, the relevant parameters in the Gridview get a green background and those that do not apply are red. The leftmost column in the gridview contains tha Parameter NAME (not editable) and the next column must be editable to populate the value.
DONE SO FAR:
I have tried on clicking the EXECUTE button , to build a parameters string in a testbox and call that with the Javascript OpenReportWin() function when I open the report in a new window. This works fine, but my biggest issue it interrogating the reportserver reports to get back a list of parameters and dooping them into a table. I have triend to use a hidden DataGrid bound to a ds onto the reportParamaters table; I have tried to poulate it using a datalist but I cannot get the hang of these thionsg and its looking messy. Ther must be a simple clean way of gettting the .GetParameters resultset back from the report server and populating the table without having to create a reportviewer object and cycling through the list of reports - it then has to render each report before you can get that list out.
Thanks
I will withdraw this for now. I will submit a solution when I am comfortable that I have reahced a clean solution.
Mac
PLEASE CLOSE!!!
I am using Cognos 8.2 to create a report with a prompt page. I am trying to create a prompt page that allows the user to choose what type of item they want to see, and then the workers assigned.
Example: Show me the workers working on projects of type 'A' and that would trigger a list of workers to be displayed who are currently working on projects of type 'A' and then the user could choose a worker/workers from the list to be displayed in the report.
I am trying to use javascript in the html item, but I have never worked with javascript before, and I am having little luck. I dont know if it is even possible or not to pass a variable to another item on the prompt page. Any ideas or examples would be appreciated.
Bring your worker names into a data item (eg [People]) - then, create another data item with a case statement:
CASE
WHEN ([People] in ('John','Jessica','Jane','Jeff'))
THEN ('Group J')
WHEN ([People] in ('Adam', 'Alex', 'Anne'))
THEN ('Group A')
ELSE 'No Group'
END
Name this data item "Group"
Then create a filter on the query: [Group] = ?Group Prompt?
Then you should be able to input 'Group A' and get only those from Group A.