Using BME280 with SNMP librarie - arduino

Question

I'm trying to use SNMP library to read BME280 sensor on NODEMCU, but I get the following error after compiling sketch:
ERROR:
ets Jan 8 2013,rst cause:2, boot mode:(3,6)
load 0x4010f000, len 3584, room 16
tail 0
chksum 0xb0
csum 0xb0
v2843a5ac
~ld
MY CODE:
#include <ESP8266WiFi.h>
#include <WiFiUdp.h>
#include <Arduino_SNMP.h>
#include <Wire.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BME280.h>
#define SEALEVELPRESSURE_HPA (1013.25)
Adafruit_BME280 bme;
const char* ssid = "Andre";
const char* password = "12345678";
float temperature = bme.readTemperature();
float humidity = bme.readHumidity();
float pressure = bme.readPressure() / 100.0F;
float altitude = bme.readAltitude(SEALEVELPRESSURE_HPA);
WiFiUDP udp;
SNMPAgent snmp = SNMPAgent("public"); // Starts an SMMPAgent instance with the community string 'public'
void setup() {
Serial.begin(115200);
WiFi.begin(ssid, password);
Serial.println("");
bme.begin(0x76);
// Wait for connection
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.print("Connected to ");
Serial.println(ssid);
Serial.print("IP address: ");
Serial.println(WiFi.localIP());
// give snmp a pointer to the UDP object
snmp.setUDP(&udp);
snmp.begin();
snmp.addFloatHandler(".1.3.6.1.4.1.12345.1", &temperature);
snmp.addFloatHandler(".1.3.6.1.4.1.12345.2", &humidity, true);
snmp.addFloatHandler(".1.3.6.1.4.1.12345.3", &pressure);
snmp.addFloatHandler(".1.3.6.1.4.1.12345.4", &altitude);
// you can accept SET commands with a pointer to an integer (or string)
}
void loop() {
snmp.loop(); // must be called as often as possible
}
I've been trying to figure out what's wrong with my code.

Answer 1

#ElefantPhace
Another error occurred:
--------------- CUT HERE FOR EXCEPTION DECODER ---------------
ets Jan 8 2013,rst cause:2, boot mode:(3,6)
load 0x4010f000, len 3584, room 16
tail 0
chksum 0xb0
csum 0xb0
v2843a5ac
~ld
--------------- CUT HERE FOR EXCEPTION DECODER ---------------
Exception (28):
epc1=0x40203c84 epc2=0x00000000 epc3=0x00000000 excvaddr=0x00000000 depc=0x00000000
stack>>>
ctx: cont
sp: 3ffffda0 end: 3fffffc0 offset: 0190
3fffff30: 40204528 3ffeebe0 3ffe8706 40204825
3fffff40: 3fffdad0 00000000 3ffeebe0 402048ec
3fffff50: 3fffdad0 3ffeea84 3ffeea2c 40203d68
3fffff60: 3fffdad0 3ffeea84 3ffeebe0 402025c5
3fffff70: feefeffe feefeffe feefeffe feefeffe
3fffff80: feefeffe feefeffe feefeffe feefeffe
3fffff90: feefeffe feefeffe feefeffe 3ffeec58
3fffffa0: 3fffdad0 00000000 3ffeec18 402050e0
3fffffb0: feefeffe feefeffe 3ffe84fc 40100c29
<<<stack<<<