I have a running code in production environment which is extracting MessageTracking.AdapterReceiveCompleteTime from the message context and assigning it to a variable.
Until yesterday it was working fine but I don't know what has happened and now I cannot see this property in the message context. Does anyone have an idea what could cause this BizTalk behavior.
OriginalMessage.ReceiveTime = GetInvoiceResponseMsg(MessageTracking.AdapterReceiveCompleteTime);
Related
I have made a Blazor app, which is working well locally. When I put it on the server, quite often (when app uses DB context) I get this error :
Error: Connection disconnected with error 'Error: WebSocket closed with status code: 1006 ()
The user have to refresh the page, which is really annoying. You can't use app working in this way.
I have found a lot of discussions on this error, lot of plans...and almost everything is older than one year. I would expect the solution already, but haven't found anything.
Anyone knows, why is this happening and how to figure it out in the Blazor app? At least to catch this error and wait until the connection is back, so the page is not getting faded?
So far I was able to do only automatic reloading of page by javascript, when I get this error. But anyway, I can't use this solution in production, because the page is down for a second and it doesn't look good. I need to catch it before and keep the page active.
Thank you.
FYI , Have you check somewhere on the server-side like the logic that use data from DB context or the security/config in the production between IIS server and DB? If you are sure that it's come from the DB context then have you validate by test other possibility like make the test method that have long delay time/or mockup method that return the data to check whether the error still occur?
I once have a really stupid code in an object. but the code is build with no error. But it clash on runtime with no clue relate to the problem.
private string _oh;
public string oh
{
get { return _oh; }
set { oh= value; // cause infinite loop > should _oh
}
}
The worst part is that the error throwed is the same message as this question, So I quite sure there is the root clause elsewhere.
Error: Connection disconnected with error 'Error: WebSocket closed with status code: 1006 ()
I am facing this error since some time, it is very intermittent in nature so, unable to understand why this error and what needs t be done t fix this.
Issue:
We have a workflow 4.5 WCF service. Everything goes well, but intermittently we see suddenly that a workflow instance gets suspended with an error in the table "DurableInstancing.InstancesTable"
The error is "Keyword Not supported: 'DB Name,1433';Initial Catalog'.
Since most times this ust workd fine without any error, I do not think this problem is related to web.config entry for connectionstring. Most times the workflow completes without any error. We have verified multiple times that the connection string is proper and there is no issue with parsing the connection string.
I suspect this issue is happening while Workflow instance is being recreated from persistence storage, and because some reason it is unable to recreate , the workflow is getting suspended with this error in DB.
I really appreciate any help in getting us through this error.
Thanks,
GD
What we found was it was an issue with permission in Database. We gave "dbo" user permission to the workflow database, and after that we have not seen this problem occur again. Has the error or exception that gets logged in the table is mre informative then it would have been better.
Thanks,
GD
I have been trying to resolve a somewhat intermittent issue working with a long running state machine running inside a WorkflowApplication. I can step through the workflow and this behaves as expected, transitioning through the states as expected, then a bookmark is reached which then persists the workflow. However, the workflow is then aborted and I get the following message:
The execution of an InstancePersistenceCommand was interrupted because the instance owner registration for owner ID 'ba26f4e9-f38b-4179-aa09-31ab9f8af337' has become invalid. This error indicates that the in-memory copy of all instances locked by this owner have become stale and should be discarded, along with the InstanceHandles. Typically, this error is best handled by restarting the host.
The Sql Instance store is initialised as follows:
SqlStore = new SqlWorkflowInstanceStore(ConfigurationManager.ConnectionStrings["SqlInstanceStore"].ConnectionString);
SqlStore.HostLockRenewalPeriod = TimeSpan.FromSeconds(15);
SqlStore.InstanceCompletionAction = InstanceCompletionAction.DeleteAll;
handle = SqlStore.CreateInstanceHandle();
InstanceView sqlView = SqlStore.Execute(handle, new CreateWorkflowOwnerCommand(), TimeSpan.FromSeconds(30));
SqlStore.DefaultInstanceOwner = sqlView.InstanceOwner;
WorkflowHost = new WorkflowApplication(WorkflowDefinition, inputs);
WorkflowHost.Run();
To create the bookmark:
context.CreateBookmark(bkmk, OnResume);
The exception doesn't really provide enough information to help troubleshooting this issue. Any help would be appreciated.
I managed to resolve this by using an overload of the instance store where I am now passing a new GUID. Need to understand this a bit more.
handle = SqlStore.CreateInstanceHandle(Guid.NewGuid());
I don't have any errors with my smart target application, but I do see in the event log, the following error messages:
ERROR 2012-09-19 14:30:09
com.tridion.smarttarget.utils.AmbientDataHelper - can't find defined
trigger-types in claim store (check if your smarttarget cartridge is
up and running)
and:
ERROR 2012-09-19 14:30:11
com.tridion.smarttarget.tags.TimeoutQueryRunner - The fredhopper query
timed out java.util.concurrent.TimeoutException at
java.util.concurrent.FutureTask$Sync.innerGet(Unknown Source) at
java.util.concurrent.FutureTask.get(Unknown Source) at
com.tridion.smarttarget.tags.TimeoutQueryRunner.executeQuery(TimeoutQueryRunner.java:64)
ERROR 2012-09-19 14:30:11
com.tridion.smarttarget.tags.TimeoutQueryRunner - The fredhopper query
timed out
I would really like to understand what is causing these and how I can remove them. Or some suggested steps to help me debug this would be great :)
As I say, everything is working perfectly, later on in the logs I see the query to ST is correct and the results being generated.
In the event that is helps, I'm running on a 2009 implementation with Smart Target 2010, java 1.5.
thanks
John
Sounds like you might have a trigger configured in ST that does not actually exist in the ADF (or is mismatched). Have you looked through your trigger-types.xml file for anything obvious? Have you disabled an ADF cartridge but not removed the corresponding trigger in the XML perhaps? See the documentation for Defining trigger types.
I think your timeout is coming from the SmartTarget region rather than FredHopper. Sometimes a query that isn't already cached in FredHopper can take a while to return, even though it's ultimately successful. The ST query tag has a timeout (defined in the smarttarget_conf.xml file, or over-ridden with a tag attribute) that it will wait for a response from Fredhopper for before resorting to using the fallback content. This might explain why you see later in the logs that the query is correct and that results are returned. See the documentation for <tcdl:query>.
No conclusive answer for you I'm afraid, but I hope that helps.
The first error is logged if your SmartTarget cartridge is not running -- or if the data that it puts into ADF is lost somehow (e.g. you have disabled sessions in your web server).
In that case, SmartTarget will still do a query but it won't include anything from the Ambient Data Framework in it. If you don't have any triggers based on ambient data, the end result is the same for you.
To get rid of the error, make sure that smarttarget_cartridge is configured correctly.
As for the timeout error, it simply means that the query sent to Fredhopper took longer than the configured time. In that case it will show the fallback content instead. If this is happening a lot, you might want to increase the timeout within smarttarget_conf.xml.
I hope you found the issue, but for future reference, the first error message is raised when the claim "taf:claim:ambientdata:definedtriggertypes" is not set by the SmartTarget cartridge. This can be caused by:
SmartTarget cartridge could not load the the trigger types from the SmartTarget server. The log will show an error "can't retrieve list of defined trigger types from FH".
The HTTP session on your web server is expired during an active visit (the HTTP session expired but the browser is still open) and the claim is "lost".
The server does not support sessions like Peter mentioned.
I've got a new production computer and installed my BizTalk app on there. The problem is that I don't see any messages in the event log, nor from my BizTalk app or BizTalk Server itself. The only message that appears in the event log is the following:
The following BizTalk host instance has initialized successfully.
BizTalk host name: BizTalkServerApplication
Windows service name: BTSSvc$BizTalkServerApplication
The source of that message is BizTalk Server. And no messages at all, even no logs about errors which I suppose already took place.
Just a quick thought incase you are still having problems.
I tried to write to the event log with a source type that didnt already exist and my BizTalk Host user account didn’t have permissions to create a new source type. This meant I never saw the entry in the event log.
E.g. (from example #Bill Osuch)
System.Diagnostics.EventLog.WriteEntry("MyBiztalkApp", "oh i did something");
Make sure either the MyBiztalkApp source exists or that your user has permissions on the event log to create it.
Also, if you have a lot of messages going through BizTalk you will probably want to implement your own logging so your event log doesn’t fill up. We used Log4Net for our implementation and a database to store messages.
If you're not getting any errors (suspended messages) as the messages process, you're not going to see anything in the app log. You could try adding an Expression shape to your orchestration and manually writing out some debug info:
System.Diagnostics.EventLog.WriteEntry("event type", "whatever...");
Does your application actually use the BiztalkServerApplication host? Check in the Biztalk Administration Console if all the host instances are indeed running. Is your application fully started? Messages are "put on hold" if your receive location is disabled for example.
To check this functionality, write to event log after every operation or shape in BizTalk orchestration.
Scenario-
Suppose you have to assigned a value to xpath of node in a map after transformation so in message assignment shape after you assign some value, you can write eventlog to admin console.
Ex. Suppose we have already initialized - "orderType" as "PO" in our expression shape and now we have to assign the value of "orderType" to the xpath of a node in our map then-
Shape- MessageAssignment(Under constructMessage Shape after transformation of map)
xpath(msgGetOrderReq, "/[local-name()='CustomerOrders' and namespace-uri()='http://example.com/EAI/IEmployee/v1.0']/[local-name()='ordertype' and namespace-uri()='http://example.com/EAI/IEmployee/v1.0']") = ordertype;
Next to this we want to print this information on the admin console so we need to write:-
System.Diagnostics.EventLog.WriteEntry("msgGetOrderReq", ordertype, msgGetOrderReq);
Build the project, Deploy and GAC it. Restart the host instance. Run the orchestration, process something and now you will be able to see the logs in admin console.
Regards
Mayank