Related
I'm trying to extract some characters from a vector called "identhog" which is allocated in the table "E". But I want to extract some characters according with its text length. Then if the lenght of the text in the vector is 10 I want to extract some characters, otherwise I want to extract another characters from another position.
if (nchar(E$identhog)==10) {
E <- mutate(E,prueba2= substr(E$identhog, 2, 6))
} else {
E <- mutate(E, prueba2=substr(E$identhog, 3,7))
}
I´m using an IF ELSE conditional, but When I run the code the following message shows up.
"Warning message: In if (nchar(E$identhog) == 10) { : the condition has length > 1 and only
the first element will be used"
And R ignores my whole IF conditional and just run:
E <- mutate(E,prueba2= substr(E$identhog, 2, 6))
How can I fix this? I have investigated about this problem and it seems that happens because I'm attempting to use an if() function to check for some condition, but it's passing a vector to the if() function instead of individual elements.
I understand that R is just checking one element in a vector at one time, but I want to check each individual element.
Some users tell that the command "ifelse" is a solution, but it is not working with my data for the amount of information it has.
ifelse((nchar(E$identhog)==10),
E <- mutate(E,prueba2= substr(E$identhog, 2, 6)),
E <- mutate(E, prueba2=substr(E$identhog, 3,7)))
Any solution?
You are using ifelse outside mutate, here an example of how to use it with dplyr.
library(dplyr)
df <- data.frame(string = c("1234567890","12345678901"))
df %>%
mutate(
prueba2 = if_else(
condition = nchar(string) == 10,
true = substr(string, 2, 6),
false = substr(string, 3, 7)
)
)
string prueba2
1 1234567890 23456
2 12345678901 34567
I am working with relatively large matrices (2197x100) and need to quickly select specific rows. The first 7 columns are values with which I can identify the needed rows, as in this example:
design_matrix = matrix(c(rep(1:3, each = 729),
rep(rep(1:3, each = 243), 3),
rep(rep(1:3, each = 81), 9),
rep(rep(1:3, each = 27), 27),
rep(rep(1:3, each = 9), 81),
rep(rep(1:3, each = 3), 243),
rep(1:3, 729)),
nrow = 2187)
I know I can use the function which() to find rows of a matrix with specific values. I am also aware I can use & to use multiple criteria. Since I need to check several entries multiple times, I am trying to find a way to do something like this:
which(design_matrix[,1:6] == c(1,1,1,1,1,1))
to get the rows with the respective values, in this case c(1,2,3). Instead I get the TRUE values of each element-wise comparison. Is there a way to do this without having to use mutliple & like in
which((design_matrix[,1] == 1) & (design_matrix[,2] == 1) & (design_matrix[,3] == 1) &
(design_matrix[,4] == 1) & (design_matrix[,5] == 1) & (design_matrix[,6] == 1))
which does what I want but would need to be rewritten whenever I need different values?
I'm using the which() function to subset my data as in design_matrix[which(design_matrix[,1]==1),], so if there is an easy way of doing this using subset that would also answer my question.
You can use sweep with margin 2 and the function != and rowSums with which to get the rows which have c(1,1,1,1,1,1).
which(rowSums(sweep(design_matrix[,1:6], 2, c(1,1,1,1,1,1), "!="))==0)
#[1] 1 2 3
You could define a key to make lookup trivial and less computationally expensive if you have to do this a lot:
key <- apply(design_matrix, 1, paste0, collapse = "")
design_matrix[key == "2133132", ]
#> [1] 2 1 3 3 1 3 2
Another solution is to use apply():
which(apply(design_matrix[,1:6],
1,
function(row)
all(row == c(1,1,1,1,1,1))
)
)
# [1] 1 2 3
I have a data frame named "mydata" that looks like this this:
A B C D
1. 5 4 4 4
2. 5 4 4 4
3. 5 4 4 4
4. 5 4 4 4
5. 5 4 4 4
6. 5 4 4 4
7. 5 4 4 4
I'd like to delete row 2,4,6. For example, like this:
A B C D
1. 5 4 4 4
3. 5 4 4 4
5. 5 4 4 4
7. 5 4 4 4
The key idea is you form a set of the rows you want to remove, and keep the complement of that set.
In R, the complement of a set is given by the '-' operator.
So, assuming the data.frame is called myData:
myData[-c(2, 4, 6), ] # notice the -
Of course, don't forget to "reassign" myData if you wanted to drop those rows entirely---otherwise, R just prints the results.
myData <- myData[-c(2, 4, 6), ]
You can also work with a so called boolean vector, aka logical:
row_to_keep = c(TRUE, FALSE, TRUE, FALSE, TRUE, FALSE, TRUE)
myData = myData[row_to_keep,]
Note that the ! operator acts as a NOT, i.e. !TRUE == FALSE:
myData = myData[!row_to_keep,]
This seems a bit cumbersome in comparison to #mrwab's answer (+1 btw :)), but a logical vector can be generated on the fly, e.g. where a column value exceeds a certain value:
myData = myData[myData$A > 4,]
myData = myData[!myData$A > 4,] # equal to myData[myData$A <= 4,]
You can transform a boolean vector to a vector of indices:
row_to_keep = which(myData$A > 4)
Finally, a very neat trick is that you can use this kind of subsetting not only for extraction, but also for assignment:
myData$A[myData$A > 4,] <- NA
where column A is assigned NA (not a number) where A exceeds 4.
Problems with deleting by row number
For quick and dirty analyses, you can delete rows of a data.frame by number as per the top answer. I.e.,
newdata <- myData[-c(2, 4, 6), ]
However, if you are trying to write a robust data analysis script, you should generally avoid deleting rows by numeric position. This is because the order of the rows in your data may change in the future. A general principle of a data.frame or database tables is that the order of the rows should not matter. If the order does matter, this should be encoded in an actual variable in the data.frame.
For example, imagine you imported a dataset and deleted rows by numeric position after inspecting the data and identifying the row numbers of the rows that you wanted to delete. However, at some later point, you go into the raw data and have a look around and reorder the data. Your row deletion code will now delete the wrong rows, and worse, you are unlikely to get any errors warning you that this has occurred.
Better strategy
A better strategy is to delete rows based on substantive and stable properties of the row. For example, if you had an id column variable that uniquely identifies each case, you could use that.
newdata <- myData[ !(myData$id %in% c(2,4,6)), ]
Other times, you will have a formal exclusion criteria that could be specified, and you could use one of the many subsetting tools in R to exclude cases based on that rule.
Create id column in your data frame or use any column name to identify the row. Using index is not fair to delete.
Use subset function to create new frame.
updated_myData <- subset(myData, id!= 6)
print (updated_myData)
updated_myData <- subset(myData, id %in% c(1, 3, 5, 7))
print (updated_myData)
By simplified sequence :
mydata[-(1:3 * 2), ]
By sequence :
mydata[seq(1, nrow(mydata), by = 2) , ]
By negative sequence :
mydata[-seq(2, nrow(mydata), by = 2) , ]
Or if you want to subset by selecting odd numbers:
mydata[which(1:nrow(mydata) %% 2 == 1) , ]
Or if you want to subset by selecting odd numbers, version 2:
mydata[which(1:nrow(mydata) %% 2 != 0) , ]
Or if you want to subset by filtering even numbers out:
mydata[!which(1:nrow(mydata) %% 2 == 0) , ]
Or if you want to subset by filtering even numbers out, version 2:
mydata[!which(1:nrow(mydata) %% 2 != 1) , ]
For completeness, I'll add that this can be done with dplyr as well using slice. The advantage of using this is that it can be part of a piped workflow.
df <- df %>%
.
.
slice(-c(2, 4, 6)) %>%
.
.
Of course, you can also use it without pipes.
df <- slice(df, -c(2, 4, 6))
The "not vector" format, -c(2, 4, 6) means to get everything that is not at rows 2, 4 and 6. For an example using a range, let's say you wanted to remove the first 5 rows, you could do slice(df, 6:n()). For more examples, see the docs.
Delete Dan from employee.data - No need to manage a new data.frame.
employee.data <- subset(employee.data, name!="Dan")
Here's a quick and dirty function to remove a row by index.
removeRowByIndex <- function(x, row_index) {
nr <- nrow(x)
if (nr < row_index) {
print('row_index exceeds number of rows')
} else if (row_index == 1)
{
return(x[2:nr, ])
} else if (row_index == nr) {
return(x[1:(nr - 1), ])
} else {
return (x[c(1:(row_index - 1), (row_index + 1):nr), ])
}
}
It's main flaw is it the row_index argument doesn't follow the R pattern of being a vector of values. There may be other problems as I only spent a couple of minutes writing and testing it, and have only started using R in the last few weeks. Any comments and improvements on this would be very welcome!
To identify by a name:
Call out the unique ID and identify the location in your data frame (DF).
Mark to delete. If the unique ID applies to multiple rows, all these rows will be removed.
Code:
Rows<-which(grepl("unique ID", DF$Column))
DF2<-DF[-c(Rows),]
DF2
Another approach when working with Unique IDs is to subset data:
*This came from an actual report where I wanted to remove the chemical standard
Chem.Report<-subset(Chem.Report, Chem_ID!="Standard")
Chem_ID is the column name.
The ! is important for excluding
I have a data frame named "mydata" that looks like this this:
A B C D
1. 5 4 4 4
2. 5 4 4 4
3. 5 4 4 4
4. 5 4 4 4
5. 5 4 4 4
6. 5 4 4 4
7. 5 4 4 4
I'd like to delete row 2,4,6. For example, like this:
A B C D
1. 5 4 4 4
3. 5 4 4 4
5. 5 4 4 4
7. 5 4 4 4
The key idea is you form a set of the rows you want to remove, and keep the complement of that set.
In R, the complement of a set is given by the '-' operator.
So, assuming the data.frame is called myData:
myData[-c(2, 4, 6), ] # notice the -
Of course, don't forget to "reassign" myData if you wanted to drop those rows entirely---otherwise, R just prints the results.
myData <- myData[-c(2, 4, 6), ]
You can also work with a so called boolean vector, aka logical:
row_to_keep = c(TRUE, FALSE, TRUE, FALSE, TRUE, FALSE, TRUE)
myData = myData[row_to_keep,]
Note that the ! operator acts as a NOT, i.e. !TRUE == FALSE:
myData = myData[!row_to_keep,]
This seems a bit cumbersome in comparison to #mrwab's answer (+1 btw :)), but a logical vector can be generated on the fly, e.g. where a column value exceeds a certain value:
myData = myData[myData$A > 4,]
myData = myData[!myData$A > 4,] # equal to myData[myData$A <= 4,]
You can transform a boolean vector to a vector of indices:
row_to_keep = which(myData$A > 4)
Finally, a very neat trick is that you can use this kind of subsetting not only for extraction, but also for assignment:
myData$A[myData$A > 4,] <- NA
where column A is assigned NA (not a number) where A exceeds 4.
Problems with deleting by row number
For quick and dirty analyses, you can delete rows of a data.frame by number as per the top answer. I.e.,
newdata <- myData[-c(2, 4, 6), ]
However, if you are trying to write a robust data analysis script, you should generally avoid deleting rows by numeric position. This is because the order of the rows in your data may change in the future. A general principle of a data.frame or database tables is that the order of the rows should not matter. If the order does matter, this should be encoded in an actual variable in the data.frame.
For example, imagine you imported a dataset and deleted rows by numeric position after inspecting the data and identifying the row numbers of the rows that you wanted to delete. However, at some later point, you go into the raw data and have a look around and reorder the data. Your row deletion code will now delete the wrong rows, and worse, you are unlikely to get any errors warning you that this has occurred.
Better strategy
A better strategy is to delete rows based on substantive and stable properties of the row. For example, if you had an id column variable that uniquely identifies each case, you could use that.
newdata <- myData[ !(myData$id %in% c(2,4,6)), ]
Other times, you will have a formal exclusion criteria that could be specified, and you could use one of the many subsetting tools in R to exclude cases based on that rule.
Create id column in your data frame or use any column name to identify the row. Using index is not fair to delete.
Use subset function to create new frame.
updated_myData <- subset(myData, id!= 6)
print (updated_myData)
updated_myData <- subset(myData, id %in% c(1, 3, 5, 7))
print (updated_myData)
By simplified sequence :
mydata[-(1:3 * 2), ]
By sequence :
mydata[seq(1, nrow(mydata), by = 2) , ]
By negative sequence :
mydata[-seq(2, nrow(mydata), by = 2) , ]
Or if you want to subset by selecting odd numbers:
mydata[which(1:nrow(mydata) %% 2 == 1) , ]
Or if you want to subset by selecting odd numbers, version 2:
mydata[which(1:nrow(mydata) %% 2 != 0) , ]
Or if you want to subset by filtering even numbers out:
mydata[!which(1:nrow(mydata) %% 2 == 0) , ]
Or if you want to subset by filtering even numbers out, version 2:
mydata[!which(1:nrow(mydata) %% 2 != 1) , ]
For completeness, I'll add that this can be done with dplyr as well using slice. The advantage of using this is that it can be part of a piped workflow.
df <- df %>%
.
.
slice(-c(2, 4, 6)) %>%
.
.
Of course, you can also use it without pipes.
df <- slice(df, -c(2, 4, 6))
The "not vector" format, -c(2, 4, 6) means to get everything that is not at rows 2, 4 and 6. For an example using a range, let's say you wanted to remove the first 5 rows, you could do slice(df, 6:n()). For more examples, see the docs.
Delete Dan from employee.data - No need to manage a new data.frame.
employee.data <- subset(employee.data, name!="Dan")
Here's a quick and dirty function to remove a row by index.
removeRowByIndex <- function(x, row_index) {
nr <- nrow(x)
if (nr < row_index) {
print('row_index exceeds number of rows')
} else if (row_index == 1)
{
return(x[2:nr, ])
} else if (row_index == nr) {
return(x[1:(nr - 1), ])
} else {
return (x[c(1:(row_index - 1), (row_index + 1):nr), ])
}
}
It's main flaw is it the row_index argument doesn't follow the R pattern of being a vector of values. There may be other problems as I only spent a couple of minutes writing and testing it, and have only started using R in the last few weeks. Any comments and improvements on this would be very welcome!
To identify by a name:
Call out the unique ID and identify the location in your data frame (DF).
Mark to delete. If the unique ID applies to multiple rows, all these rows will be removed.
Code:
Rows<-which(grepl("unique ID", DF$Column))
DF2<-DF[-c(Rows),]
DF2
Another approach when working with Unique IDs is to subset data:
*This came from an actual report where I wanted to remove the chemical standard
Chem.Report<-subset(Chem.Report, Chem_ID!="Standard")
Chem_ID is the column name.
The ! is important for excluding
I have a data frame named "mydata" that looks like this this:
A B C D
1. 5 4 4 4
2. 5 4 4 4
3. 5 4 4 4
4. 5 4 4 4
5. 5 4 4 4
6. 5 4 4 4
7. 5 4 4 4
I'd like to delete row 2,4,6. For example, like this:
A B C D
1. 5 4 4 4
3. 5 4 4 4
5. 5 4 4 4
7. 5 4 4 4
The key idea is you form a set of the rows you want to remove, and keep the complement of that set.
In R, the complement of a set is given by the '-' operator.
So, assuming the data.frame is called myData:
myData[-c(2, 4, 6), ] # notice the -
Of course, don't forget to "reassign" myData if you wanted to drop those rows entirely---otherwise, R just prints the results.
myData <- myData[-c(2, 4, 6), ]
You can also work with a so called boolean vector, aka logical:
row_to_keep = c(TRUE, FALSE, TRUE, FALSE, TRUE, FALSE, TRUE)
myData = myData[row_to_keep,]
Note that the ! operator acts as a NOT, i.e. !TRUE == FALSE:
myData = myData[!row_to_keep,]
This seems a bit cumbersome in comparison to #mrwab's answer (+1 btw :)), but a logical vector can be generated on the fly, e.g. where a column value exceeds a certain value:
myData = myData[myData$A > 4,]
myData = myData[!myData$A > 4,] # equal to myData[myData$A <= 4,]
You can transform a boolean vector to a vector of indices:
row_to_keep = which(myData$A > 4)
Finally, a very neat trick is that you can use this kind of subsetting not only for extraction, but also for assignment:
myData$A[myData$A > 4,] <- NA
where column A is assigned NA (not a number) where A exceeds 4.
Problems with deleting by row number
For quick and dirty analyses, you can delete rows of a data.frame by number as per the top answer. I.e.,
newdata <- myData[-c(2, 4, 6), ]
However, if you are trying to write a robust data analysis script, you should generally avoid deleting rows by numeric position. This is because the order of the rows in your data may change in the future. A general principle of a data.frame or database tables is that the order of the rows should not matter. If the order does matter, this should be encoded in an actual variable in the data.frame.
For example, imagine you imported a dataset and deleted rows by numeric position after inspecting the data and identifying the row numbers of the rows that you wanted to delete. However, at some later point, you go into the raw data and have a look around and reorder the data. Your row deletion code will now delete the wrong rows, and worse, you are unlikely to get any errors warning you that this has occurred.
Better strategy
A better strategy is to delete rows based on substantive and stable properties of the row. For example, if you had an id column variable that uniquely identifies each case, you could use that.
newdata <- myData[ !(myData$id %in% c(2,4,6)), ]
Other times, you will have a formal exclusion criteria that could be specified, and you could use one of the many subsetting tools in R to exclude cases based on that rule.
Create id column in your data frame or use any column name to identify the row. Using index is not fair to delete.
Use subset function to create new frame.
updated_myData <- subset(myData, id!= 6)
print (updated_myData)
updated_myData <- subset(myData, id %in% c(1, 3, 5, 7))
print (updated_myData)
By simplified sequence :
mydata[-(1:3 * 2), ]
By sequence :
mydata[seq(1, nrow(mydata), by = 2) , ]
By negative sequence :
mydata[-seq(2, nrow(mydata), by = 2) , ]
Or if you want to subset by selecting odd numbers:
mydata[which(1:nrow(mydata) %% 2 == 1) , ]
Or if you want to subset by selecting odd numbers, version 2:
mydata[which(1:nrow(mydata) %% 2 != 0) , ]
Or if you want to subset by filtering even numbers out:
mydata[!which(1:nrow(mydata) %% 2 == 0) , ]
Or if you want to subset by filtering even numbers out, version 2:
mydata[!which(1:nrow(mydata) %% 2 != 1) , ]
For completeness, I'll add that this can be done with dplyr as well using slice. The advantage of using this is that it can be part of a piped workflow.
df <- df %>%
.
.
slice(-c(2, 4, 6)) %>%
.
.
Of course, you can also use it without pipes.
df <- slice(df, -c(2, 4, 6))
The "not vector" format, -c(2, 4, 6) means to get everything that is not at rows 2, 4 and 6. For an example using a range, let's say you wanted to remove the first 5 rows, you could do slice(df, 6:n()). For more examples, see the docs.
Delete Dan from employee.data - No need to manage a new data.frame.
employee.data <- subset(employee.data, name!="Dan")
Here's a quick and dirty function to remove a row by index.
removeRowByIndex <- function(x, row_index) {
nr <- nrow(x)
if (nr < row_index) {
print('row_index exceeds number of rows')
} else if (row_index == 1)
{
return(x[2:nr, ])
} else if (row_index == nr) {
return(x[1:(nr - 1), ])
} else {
return (x[c(1:(row_index - 1), (row_index + 1):nr), ])
}
}
It's main flaw is it the row_index argument doesn't follow the R pattern of being a vector of values. There may be other problems as I only spent a couple of minutes writing and testing it, and have only started using R in the last few weeks. Any comments and improvements on this would be very welcome!
To identify by a name:
Call out the unique ID and identify the location in your data frame (DF).
Mark to delete. If the unique ID applies to multiple rows, all these rows will be removed.
Code:
Rows<-which(grepl("unique ID", DF$Column))
DF2<-DF[-c(Rows),]
DF2
Another approach when working with Unique IDs is to subset data:
*This came from an actual report where I wanted to remove the chemical standard
Chem.Report<-subset(Chem.Report, Chem_ID!="Standard")
Chem_ID is the column name.
The ! is important for excluding