As a MQ admin I come across AMQ9209 and AMQ9208 errors number of times but application does not report any connection issue with MQ qmgr most of the times. In that case these errors doens't make any sense.(May be application is using auto reconnect option).
I am aware of the causes from mq server side. But I want to know if there is anything that can be changed in application code to get rid of these tcp/ip errors.
Thanks.
Related
I get Timer_ConnectionIdle message from error logs of httperror folder in system32/logfiles.
And sometimes the web page return service unavailable or connection refused.
What is the problem?
How can I solve that?
Two Different issues that you are talking about.
Timer connection idle is not something you need to be worried about. It is HTTP.SYS's way of telling you that the client with which it established a connection did not disconnect because there is always a chance that the client would want to establish the connection again. I think it usually waits for 2 minutes before terminating the connection and that is when you get this message in the HTTPERR logs.
Now coming to Service Unavailable and Connection Timeout errors, this is something that you need to take note of. Check for event logs during the time of issue and see if you find anything there.
If you are unable to find anything in the event logs, my next question would be to identify what is done in order to overcome the issue ? Do you recycle the application pool to get the application up and running ? Do you reset IIS ? If you do any of the above, then please capture a full user dump of w3wp process using debug diag during the time of issue (before performing an iisreset or application pool recycle). Analyzing the dump will tell you exactly whats going wrong.
Feel free to follow up with any questions you have.
When am running my JMeter scripts using GUI for few of the samples sometimes am getting Connection timed out error and response are not getting, but if I run the same test after few mins I got the response for the same samples.
Can anybody please answer what is the solution for this?
Currently am checking the response time of each page, if add timers than the page response time will be showing more right?
There are at least 3 possibles reasons:
Your server (meaning web servers handling request and any components after them) is not handling the load correctly and slowing down, monitor the system and check
You have exhausted your injector ephemeral ports , you need to adjust your OS TCP settings to increase port range
You're running load test in GUI mode with a View Results Tree in test, this is bad practice as GC will happen frequently possibly triggering Stop The World leading to this. As per best-practices use NON GUI mode:
https://jmeter.apache.org/usermanual/best-practices.html
https://www.ubik-ingenierie.com/blog/jmeter_performance_tuning_tips/
I have an WebAPI service using ODP.NET to make connections to several oracle databases. Normally the web service would be hit several times a second and will never have long periods on inactivity. In our test site however, we did not use it for 2-3 days. This morning, we hit the service and got "connection request timeout" exceptions from ODP.NET, suggesting that the connection pool was out of available connections. We are closing the connections after use. The service was working fine before the period, but today the very first query got the timeout exception. Our app pool in IIS is configured to never reset.
My question then is, what can cause the connection pool to fill with bad connections after a period of inactivity, where these connections are not cleaned up in the usual 3 minute cycle? It only happened to 2 out of the 3 of our databases, and Validate Connection=true is set for all of them.
EDIT
So after talking to the DBA, there is some different between a connection/session being killed manually or by timeout and the database server severing the TCP connections. In this case, the TCP connection was severed as part of a regular backup (why is not important for this). I guess this happens when the whole database server goes offline at once. The basis of the question still applies I think though: why is ODP.NET unable to cleanup severed connections overtime? There is a performance counter that refers to "Stasis" connections, could those connections be stuck in that state? I would think that it should be able to see that a connection is no longer active (Validate Connection=True), kill it and not return it to the pool.
Granted, this problem can be solved by just resetting the app pool everything the database goes down. I would still like to configure ODP.NET connection pooling to be more fault tolerant.
I have run into this same issue, and the only solution I have found is to use the Connection Lifetime connection string parameter in conjunction with Validate Connection.
In my particular case, the connection timeout was set at the server and the connections in the pool would timeout, but not be sniped out of the pool, resulting in errors.
Setting both the Connection Lifetime and the Validate Connection parameters has resolved the issue.
Make sure the Connection Lifetime value that you choose is less than the server connection inactivity timeout.
The recommended solution is to use ODP.NET Fast Connection Failover (FCF). FCF will automatically remove invalid connections from the pool such that you don't need to use Validate Connection, Connection Lifetime, nor clear the pool.
To use FCF, set "HA events=true", use connection pooling, and have your DBA set up Fast Application Notification (FAN) on the server side. FAN is what alerts the ODP.NET pool when a DB service or node goes down or rebooted. Upon receiving the message, ODP.NET knows which connections to remove from the pool and removes them, leaving all other valid connections untouched.
Something else is going on here. Min Pool Size and some of the other settings help when the connection is severed from things like DBA configured idle timeouts and firewall tcp idle timeouts, 'connection request timeout' occurs when created a new connection.
This could be simple network problem. There could be something interfering with dns resolution of the servers. Another case is not having fully qualified entries in tnsnames. I've been bit by the latter a couple of times.
The other issue is the one you've already recognized - full pool.
Double check that you don't have a connection leak somewhere. A missing .Close is one thing but if you're not using a 'using' statement, a try/finally is required as an unhandled exception could be thrown prior to the .Close.
I would use perfmon to monitor some of the connection statistics to start - NumberOfPooledConnections, NumberOfActiveConnections, etc:
I am inside a network where I need proxy settings to access the internet.
I have a weird problem.
The internet is working fine.
But it is one particular instance when i get this error:
Network Error (tcp_error)
A communication error occurred: "Operation timed out"
The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
For assistance, contact your network support team.
This happens when I use hadoop in local mode.
I can access the UI interface. I can see the jobs running. but when I try to see the logs of each task.. i am not able to access those logs.
UI--> job-->map--> task--> all <-- this is where the error is..
Any clues?
THanks
Not sure about exactly what your tcp action is, or about Hadoop or your proxy setup, but if you can reliably repeat the error, and the timeout error happens at approximately the same time each time you test, and that time is on the order of minutes, my guess would be that you've got a true processing delay (perhaps caused by blocking somewhere) at the server, but not necessarily.
We currently experience a problem with a self-written server application running on Windows (occurs on different versions). The server listens at a TCP port, accepts connections, exchanges some data and then closes the connections again. There are about 100 clients that connect from time to time.
Sometimes the server stops to work: Log files show that connections are still accepted, but that at the first read attempt a socket error (10054 - Connection reset by peer) occurs. I don't think it is a client issue because it suddenly stops working for all clients.
Now we found out, that the same problem occurs with our old server software, that is even written in another programming language. So it doesn't seem to be an error in our program - I think it has to be some kind of OS / firewall issue? Of course, firewalls have been deactivated, which didn't solve the issue yet.
Any ideas where to look into? Wireshark logs will follow soon..
Excerpt from the log (Timestamp, Thread Id, message)
11:37:56.137 T#3960 Connection from 10.21.13.3
11:37:56.138 T#3960 Client Exception: Socket Error # 10054
Connection reset by peer.
11:37:56.138 T#3960 ClientDisconnected
11:38:00.294 T#4144 Connection from 10.21.13.3
You can see that the exception occurs almost at the same time as the connection is accepted, in this case the client reconnects after a few seconds.
A "stateful" firewall or NAT keeps track of connections, and ought to send RSTs for connectiosn it doesn't know about. If the firewall loses track of connections for some reason, then you'll probably see random connections being reset.
Our router at work does this — it forgets about connections when the PPP connection dies, which is remarkably unhelpful when it rains and the DSL restart takes a bit too long. However, instead of resetting connections, it just drops packets (even more unhelpful!).
Sounds like a firewall or routing issue - maybe stale connections get disconnected after a timeout period. Are you using a ping/keepalive inside your protocol.
Otherwise you may ask Wireshark to see what is going on.
First, thanks for many hints - I'm afraid the problem was a completely different one which you couldn't possibly solve by reading my question.
The server application uses log4net, configured with a log file an ImmediateFlush = true. If every log statement is directly written into the file and multiple socket connections occur this slows down the whole application.
The server needed about a minute to really accept the connection. This was far more than the timeout on clientside. So in the log there was only shown "accepted" followed by "disconnected" - even the log was delayed!
Sorry for the inconvenience...
Have you tried changing the backlog and then see how much time or how many clients are served before this problem occurs
You don't say what Windows versions you're using for the server, but you should be aware that the Windows TCP/IP stack behaves differently in server and client OSes. There are limits on how many simultaneous incoming connections a client OS will allow, and they are significantly lower than you might expect.
What do the logs look like from the client side?
Since the error is stating that the client is dropping the connection; if you see the same error on the client side then it is a firewall or proxy that is dropping the connection (both side seeing the opposite side dropping the connection is indicative of a proxy/firewall).
If the error is not present on the client side; then I would say that your client side is where you will see the actual error.