I'm trying to connect my firebase auth to an expo project.
I'm following the main docs of each library. I'm stucking on this step.
I'm not able in windows to exeute this command line openssl rand -base64 32 | openssl sha1 -c.
I've tried with the specific https://code.google.com/archive/p/openssl-for-windows/downloads but I don't know how to reproduce the same line.
Any help would be great, thanks in advance.
You need to install openssl. It is usually available on Linux (which I think that article might have been written for). There are some Windows binaries available at here. Alternatively, you could setup a WSL session, and run the command from there.
that is a linux command. Therefore a linux terminal is needed.
there are at least 2 ways to get this done
using virtual machine with ubuntu or some other operating system that uses a linux terminal aka shell (which I doubt you know about)
OR
installing a linux emulator (windows 8+ since it's from the windows store)
assuming you would prefer option 2, go to the windows store, search "Kali" and you will find an app called Kali. install it and if an error shows up, here's a nice video here that talks about solving that error and you would have a kali terminal on your windows computer (your command would work there)
Related
I am using ConEmu 150504 under Windows 10 Enterprise, release 21H2, and I am having some problems when connecting to a linux host via ssh.
There is no cygwin installation at all. Every Windows utility, including ssh, is a non-cygwin version. I mention this here because other similar questions that I have found involve the use of cygwin's ssh, but I want to make it clear that I am not using the cygwin version of ssh nor any other cygwin software.
From within my ConEmu window, I can successfully connect to my linux host, as follows ...
ssh myuserid#the.host.name.com
Once connected to my linux host, I want to use various curses-based and other console-based utilties, including emacs -nw. I have export TERM=xterm properly set in my linux shell, but I am only getting partial console capability.
By "partial", I mean that ANSI color codes are not being honored, and certain control characters are not being honored.
Is there some way to set up ConEmu so that it is totally, completely, 100-percent emulating full xterm capabilities and full ANSI character-code management?
Thank you in advance for any thoughts and suggestions.
PS: setting export TERM=xterm-color and export TERM=xterm-256color in linux don't help at all when I'm using ConEmu.
I am new to these forums and to using Ubuntu and linux and UNIX. I really need some help here. I hope I haven't shot myself in the foot already. I have been trying to complete a UNIX carpentry lesson on the internet for an assignment. I am learning the basics about UNIX. I am not using a Mac, I am using a PC that I did not configure in any way (maybe that's my problem). I am using windows 10 on a lenovo and trying to the command prompt on Ubuntu to find my desktop where a file called "data-shell" is located. The problem: IT IS NOT FINDING THE DESKTOP. Upon further inspection, I have been looking through the location of my desktop and "data-shell" file and found it in the Users location under a number 12094, which I am assuming is the serial number for the computer. I have NEVER fiddled with the software at all with this computer as it cost me a lot of money, but I really do not want to be stopped in the tracks already. I have the following images numbered in the order that I discovered everything; they are posted here. I would really appreciate the help. P.S.: Since I am using a PC and not mac, I thought I had to use another command line like BASH or the terminal on my PCor doI just use Ubuntu? The UNIX shell is supposed to start with a $, right? Please correct me if I a wrong and thank you for your help
.
linux commands on windows can be ran via cmder or git bash (what i had used in past)
and in linux the desktop is at the path
/home/< username>/Desktop
whereas in windows its
C:\Users<username>\Desktop
both windows (DOS) and ubuntu/mac(linux) environment are entirely different you can directly run commands of one on the other environment, you do need to "setup" that env first if the command is not native to that.
Now, since its assignments that you are doing and all you need is bare-min linux env
you can give https://repl.it/ a try and create a new project in bash
Also, when you install Ubuntu on windows you dont get acces to windows like path, like "C:...", in ubuntu c:\ of windows is mounted to some other path in ubuntu
search on google how to access windows desktop from ubuntu shell after installing ubuntu inside of windows
When using Windows Subsystem for Linux (WSL), your C drive is located under /mnt/c.
Judging from the screenshot, you are user 12094, so you can either accept this, or you need to actually configure your machine. Also if you look in the screenshot you provided, there is a /home folder which I am betting is actually pointing to /mnt/c/, and your home folder will be under /home/12094, which is also the same as what is stored in $HOME.
To find the location of a file called data-shell, you can run the following linux command while in your home folder:
find $HOME -type f -name 'data-shell'
This command recursively searches for files in your home directory, with the name data-shell
In my app i want to open ssh in terminal-emulator for user. Now i'am using QProcess like this:
QProcess _localhostConnection;
_localhostConnection.start(QString("gnome-terminal"), QStringList("--command=ssh 127.0.0.1"));
But the problem is there can be no gnome-terminal on another computer. Another computer has Ubuntu. How can i get installed terminal's list in Qt on Ubuntu?
Try calling x-terminal-emulator instead. Almost all Debian-based systems use the update-alternatives package (in conjunction with virtual packages like x-terminal-emulator) to bookkeep programs with similar functions, such as Internet browsers, editors, command shells, et cetra. Calling x-terminal-emulator will launch the default terminal emulator set by the user.
Read more about update-alternatives here: https://manpages.ubuntu.com/manpages/xenial/en/man1/update-alternatives.1.html
However, hardcoding --command=ssh 127.0.0.1 isn't very wise if you are aiming to support all terminal emulators. XTerm, for example, won't accept that parameter syntax.
I am trying to start working with OpenCL. I have two NVidia graphics card, I installed "developer driver" as well as SDK from NVidia website. I compiled the demos but when I run
./oclDeviceQuery
I see:
OpenCL SW Info:
Error -1001 in clGetPlatformIDs Call
!!!
How can I fix it? Does it mean my nvidia cards cannot be detected? I am running Ubuntu 10.10 and X server works properly with nvidia driver.
I am pretty sure the problem is not related to file permissions as it doesn't work with sudo either.
In my case I have solved it by installing nvidia-modprobe package available in ubuntu (utopic/multiverse). And the driver itself (v346) was installed from https://launchpad.net/~mamarley/+archive/ubuntu/nvidia
Concretely, I have installed nvidia-opencl-icd-346, nvidia-libopencl1-346, nvidia-346-uvm, nvidia-346 and libcuda1-346. Not sure if they are all needed for OpenCL.
This is a result of not installing the ICD portion of Nvidia's openCL runtime. The ICD profile will instruct your application of the different openCL implementations installed on the system as multiple implementations from different vendors can coexist. Whe your application does not find the ICD information it gives the Error -1001.
Run your program as root. In case of success: you have trouble with cl_khr_icd- extension to load the vendor driver.
If you not running X11, you have to create device files manually or by (boot-)script:
ERROR: clGetPlatformIDs -1001 when running OpenCL code (Linux)
Same problem for me on a Linux system. Solution is to add the user to the video group:
# sudo usermod -aG video your-user-name
Since I just spend a couple of hours on this, I thought I would share:
I got the error because I was connected to the machine per remote desktop (mstsc). On the machine itself everything worked fine.
I have been told that it should work with TeamViewer by the way.
Dont know if you ever solved this problem, but I had the same issue and solved it in this post: ERROR: clGetPlatformIDs -1001 when running OpenCL code (Linux)
Hope it helps!
I have solved it in Ubuntu 13.10 saucy for intel opencl by created link:
sudo ln -s /opt/intel/opencl-1.2-3.2.1.16712/etc/intel64.icd /etc/OpenCL/vendors/nvidia.icd
I just ran into this problem on ubuntu 14.04 and I could not find ANY working answers anywhere online including this thread (though this was the first to show up on google). What ended up working for me was to remove ALL previous nvidia software and then to reinstall it using the .run file provided on the nvidia website. Installing the components through apt-get seems to fail for some reason.
1) Download CUDA .run file: https://developer.nvidia.com/cuda-downloads
2) Purge all previous nvidia packages
sudo apt-get purge nvidia-*
3) Install all run file components (you will likely have to stop X or restart in recovery mode to run this)
sudo sh cuda_X.X.XX_linux.run
This is because OpenCL has the same brain damaged one library per vendor setup that OpenGL has. A likely reason for the -1001 error is that you have compiled with a different library than the linker is trying to dynamically load.
So see if this is the problem run:
$ ldd oclDeviceQuery
...
libOpenCL.so.1 => important path here (0x00007fe2c17fb000)
...
Does the path point towards the NVidia-provided libOpenCL.so.1 file? If it doesn't, you should recompile the program with an -L parameter pointing towards the directory containing NVidia's libOpenCL.so.1. If you can't do that, you can override the linker's path like this:
$ LD_LIBRARY_PATH=/path/to/nvidias/lib ./oclDeviceQuery
For me, I was missing the CUDA OpenCL library, Running sudo apt install cuda-opencl-dev-12-0 solved it.
You should get number of platforms, allocate the memory for platforms, again get this platforms and then create context from this platform. There is good example:
http://developer.amd.com/support/KnowledgeBase/Lists/KnowledgeBase/DispForm.aspx?ID=71
This might be due to querying clGetPlatformIDs by multiple threads at the same time
I'm trying to build an application from source in windows that requires some Unix tools. I think it's the apparently standard ./configure; make; make install (there's no INSTALL file). First I tried MinGW but got confused that there was no bash, autoconf, m4, or automake exes in \bin. I'm sure I missed something obvious but I installed Cygwin anyways just to move forward. For some reason when I run
sh configure.sh
I get:
platform unix
compiler cc
configuration directory ./builds/unix
configuration rules ./builds/unix/unix.mk
My OS has identity problems. Obviously the makefile is all wrong since I'm not on unix but win32. Why would the configure script think this? I assume it has something to do with Cygwin but if I remove that I can't build it at all. Please help; I'm very confused.
Also is it possible to build using MinGW? What's the command for bash and is mingw32-make the same as make? I noticed they're different sizes.
Everything is fine. When you are inside CygWin, you are basically emulating an UNIX. sh runs inside CygWin, and thus identifies the OS correctly as Unix.
Have a look at GCW - The Gnu C compiler for Windows
Also, you might be interested in this help page, that goes into some detail about the minimal system (MSYS), such as how to install, configure et. c.
That should help you get bash, configure and the rest to work for MinGW as well.
From the Cygwin home page
Cygwin is a Linux-like environment for Windows. It consists of two parts:
A DLL (cygwin1.dll) which acts as a Linux API emulation layer providing substantial Linux API functionality.
A collection of tools which provide Linux look and feel.
Since configure is using the Cygwin environment, it is interacting against the emulation layer and so it is just like it's working on a Unix environment.
Have you tried building the application and seeing if it works?