I assume the kas-poky-rpi.yml was intended to work out of the box, but I get the following error.
Can someone offer some advice or hints which files does this refer to and any insights on the repo error?
I cloned the openbmc repo.
I also tried to run kas from an empty dir with the same error.
Error
kas build meta-raspberrypi/kas-poky-rpi.yml
2020-06-15 14:30:14 - INFO - kas 2.1.1 started
…
2020-06-15 14:30:42 - ERROR - Multiple init scripts found (openbmc vs. poky).
2020-06-15 14:30:42 - ERROR - Resolve ambiguity by removing one of the repos
Related
I am trying to install the ggpattern package from GitHub (https://www.rdocumentation.org/packages/ggpattern/versions/0.2.0)
I've reinstalled R, followed the all steps according to the site, also tried
remotes::install_github("coolbutuseless/ggpattern", force = TRUE)
But I still get:
Error: Failed to install 'unknown package' from GitHub:
HTTP error 401.
Bad credentials
Rate limit remaining: 19/60
Rate limit reset at: 2022-01-29 18:28:15 UTC
I'm working on R version 4.1.2 (newest according to me) on Windows.
Do you have any idea what is the issue here?
You need to check if you have a personal access token set in your environment. For example, when I have a Git project, I set a personal access token. However, I set this in the project environment, so that it isn't any issues outside of that environment.
To see if there is one assigned:
Sys.getenv("GITHUB_PAT")
If there is one set, write it down (you may need that in the future).
To remove it, so you can install the GitHub package:
Sys.unsetenv("GITHUB_PAT")
I'm new to Julia and I want to use COBRA Package.
For adding COBRA I use command :
Pkg.add("COBRA")
But when running, I get these errors:
INFO: Building WinRPM
WARNING: skipping repodata/repomd.xml, not in cache -- call WinRPM.update() to download
WARNING: skipping repodata/repomd.xml, not in cache -- call WinRPM.update() to download
INFO: Downloading https://cache.julialang.org/http://download.opensuse.org/repositories/windows:/mingw:/win32/openSUSE_Leap_42.2/repodata/repomd.xml
WARNING: Unknown download failure, error code: 2148270086
WARNING: Retry 1/5 downloading: https://cache.julialang.org/http://download.opensuse.org/repositories/windows:/mingw:/win32/openSUSE_Leap_42.2/repodata/repomd.xml
until:
WARNING: Unknown download failure, error code: 2148270086
WARNING: Retry 5/5 downloading: https://cache.julialang.org/http://download.opensuse.org/repositories/windows:/mingw:/win32/openSUSE_Leap_42.2/repodata/repomd.xml
WARNING: received error 0 while downloading
https://cache.julialang.org/http://download.opensuse.org/repositories/windows:/mingw:/win32/openSUSE_Leap_42.2/repodata/repomd.xml
After these errors, I have checked the link and I've found out the source is not there, anymore.
So then I ran this command as said above:
WinRPM.update()
But it has thrown this error:
ERROR: UndefVarError: WinRPM not defined
Please Help me to add COBRA to Julia. I'm using version 0.6.4 because Cobra does not work on the next versions.(Windows 10)
Any help would be appreciated.
The problem, as you've mentioned, is that the original sources used by the package aren't valid URLs anymore. The proper way to solve this is to open a pull request with the package to change the URLs (which I've now done here ). As a stopgap measure, here's a hacky way to work around this issue for now:
Do a Pkg.add("WinRPM"). This might trigger the same warnings as above, ignore these.
Next, using WinRPM to load the package we added
Now, the source URLs are read from the sources.list file (linked above) into a global WinRPM.sources variable. We're going to edit this variable's contents to point to new working URLs. (This is generally a terrible idea, to directly poke into the internals of a module and change things.)
julia> WinRPM.sources[:] = replace.(WinRPM.sources, "Leap_42.3" => "Leap_15.3")
2-element Vector{String}:
"https://cache.julialang.org/http://download.opensuse.org/repositories/windows:/mingw:/win32/openSUSE_Leap_15.3"
"https://cache.julialang.org/http://download.opensuse.org/repositories/windows:/mingw:/win64/openSUSE_Leap_15.3"
A WinRPM.update() should now work, and download things into a local cache.
I'm using version 0.6.4 because Cobra does not work on the next versions.
I hope you mean Julia 1.6.4 here, or version 0.6.4 of something else in the stack. If you mean Julia version 0.6.4, you might face further problems down the road and find it hard to get support for such an old version.
Details
I am getting a build failure of my read-the-docs that I don't understand. The assertion of "verbatim" in line 2151 of nbsphinx.py is causing the build failure. So the build fails when I try to include the Jupyter Notebook tutorials I created. I compared current versions of the tutorials to previous versions which had not caused the build to fail, and I can't find a difference that could account for the current failure.
Read the Docs project URL: lofti_gaia
Build URL: https://github.com/logan-pearce/lofti_gaia
Read the Docs username: logan-pearce
Expected Result
A passing build including *.ipynb files
Actual Result
Build failed at line 2151 of nbsphinx.py due to assertion of 'Verbatim' failing.
Terminal output:
Running Sphinx v4.1.2
loading translations [en]... done
making output directory... done
WARNING: html_static_path entry '_static' does not exist
loading pickled environment... done
building [mo]: targets for 0 po files that are out of date
building [latex]: all documents
updating environment: 0 added, 0 changed, 0 removed
looking for now-outdated files... none found
processing lofti_gaia.tex... index installation tutorials/QuickStart tutorials/Tutorial api lofti loftitools
resolving references...
done
writing... failed
Exception occurred:
File "/home/docs/checkouts/readthedocs.org/user_builds/lofti-gaia/conda/latest/lib/python3.7/site-packages/nbsphinx.py", line 2151, in depart_codearea_latex
assert 'Verbatim' in lines[0]
AssertionError
The full traceback has been saved in /tmp/sphinx-err-x1h83s3m.log, if you want to report the issue to the developers.
Please also report this if it was a user error, so that a better error message can be provided next time.
A bug report can be filed in the tracker at <https://github.com/sphinx-doc/sphinx/issues>. Thanks!
According to the github issue 584 for nbsphinx (https://github.com/spatialaudio/nbsphinx/issues/584), this is due to a compatibility issue with sphinx 4.1.0. It can be gotten around by requiring sphinx version 4.0.2.
So in my requirements.txt file, I included sphinx==4.0.2, after which the build passes. So now my requirements.txt file looks like:
numpy
matplotlib
astropy>=4.0.1.post1
astroquery>=0.4
sphinx==4.0.2
ipython==7.19.0
nbsphinx>=0.8.6
and the build passes.
I have encountered the same issue. I did not solve it with .ipynb format, but converting the jupyter notebook to .rst format works.
May it helps
I've been trying to setup push replication in pypi repos, however that does not seem to work. If I setup the remote to be a generic repo, then the files get pushed. Otherwise, if it's a pypi repo, then I get the following error:
Error while deploying item 'test:gcovr/3.2/gcovr-3.2-py2.7.egg on Url:http://artifactory/artifactory/api/pypi/testpypi ': Method Not Allowed [405]
When trying to replicate the test repo to testpypi. Am I doing something wrong here? I've tried suffixing with simple or even just a /. Nothing seems to work.
You should use the following URL format when configuring the replication:
http://artifactory/artifactory/testpypi
I installed the NuGet package 'EmbeddedSTS' to test a proof of concept. It worked well and I was happy with the package.
I decided to remove the package. However, when I removed the EmbeddedSTS package and built my solution, I got the following error:
The pre-application start initialization method Start on type
Thinktecture.IdentityModel.EmbeddedSts.EmbeddedStstConfiguration threw
and exception with the following error message: ID7027 Could not
load the identity configuration because no
configuration section was found.
Am I missing a step to completely remove the EmbeddedSTS package?
When I check the installed packages on the solution, EmbeddedSTS is not there.
My question is NOT how to fix the error message; its how to remove the EmbededSTS from Visual Solution/ Solution
Many Thanks!
The answer was simple. There is a EmbeddedSTS DLL in the bin which is fired up each time you start debugging. By removing this DLL I was able to get my solution to build again.