I'm an application developer, looking into trying to understand how HTTP request/responses are passed at the transport layer, and found some good resources that have been helping me, but there are still some questions I can't track down
How is HTTP converted to TCP?
This thread helped me understand that as a request is passed down each layer, the layer is "encapsulating" the payload with headers until it's sent over the wire
So my current understanding is that the HTTP Request is really a payload, which then the TCP layer will throw some headers on. These headers seem to mostly be used to track the order of the packets of the messages that will be going back-and-forth
TCP Headers:
And then IP headers are slapped on (https://www.thegeekstuff.com/2012/03/ip-protocol-header/)
Which just track the source/destination and size of the packet
It's clear that a every HTTP request does not map 1:1 to a packet, based on what I have found it looks like the requests can be broken up into pieces to be streamed over TCP
If the request needs to be broken up, where is the code that does that?
Related
I came across the term HTTP. I have done some research and wanted to ensure that I correctly understood the term.
So, is it true that HTTP, in simple words, a letter containing information in the language that both client and server can understand.
Then, that letter is sent to the server thanks to TCP/IP which serves as a car that takes that letter to the server.
Then, after the letter is delivered to the server, the server reads the content of the letter and if it is GET request, the server takes the necessary data and ATTACHES that data to the letter and sends back to the client via again TCP/IP. But if it was POST request then the client ATTACHES the DATA to the letter and sends it to the server so that it saves that data in the database.
Is that true?
Basically, it is true.
However, the server can decide what to do if it is a GET or POST or any other request(it doesn't need to e.g. append it to a file).
I will show you some additional information/try to explain it in my words:
TCP is another communication protocol protocol. It allows a client to open a connection to a server and they can communicate afterwards.
HTTP(hyper text transfer protocol) builds up on TCP.
At first, the client opens a connection to the server.
After that, the client sends the HTTP Request. The first line contains the type of the request, the path and the version. For example, it could be GET / HTTP/1.1.
The next part of the request contains the Request parameters. Every parameter is a line. The parameters are sent like the following: paramName: paramValue
This part of the request ends with an empty line.
If it is a POST Request, query parameters are added next. If it is a GET Request, these query parameters are added with the path(e.g. /index.html?paramName=paramValue)
After rescieving the Request, the server sends a HTTP Response back to the client.
The first line of the response contains the HTTP version, the status code and the status message. For example, it could be HTTP/1.1 200 OK.
Then, just like in the request, the response parameters are following. For example Content-Length: 1024.
The response parameters also end with an empty line.
The last part of the response is the body/content. For example, this could be the HTML code of the website you are visiting.
Obviously, the length of the content/body of the response has to match the Content-Length parameter(in bytes).
After that, the connection will be closed(normally). If the client to e.g. request resources, it will send another request. The server has NO POSSIBILITY to send data to the client after that unless the client sends another request(websockets can bypass this issue).
GET is meant to get the content of a site A web browser will send a GET request if you type in a URL. POST can be used to update a site but in fact, the server can decide that. POST can be also used if the server doesn't want query parameters to be shown in the address bar.
There are other methods like PATCH or DELETE that are used by some APIs.
Some important status codes (and status messages) are:
200 OK (everything went well)
204 No content (like ok but there is no body in the response)
400 Bad Request (something is wrong with the Request)
404 Not found (the requested file(the path) was not found on the server)
500 Internal server error (An error occured while processing the request)
Every status code beginning with 1 is related to inform the client of something.
If it is starting with 2, everything went right.
Status code beginning with 3 forward the client to another site.
If it starts with 4, there is a error on the client side.
Codes starting with 5 represent an error that occured on the server side.
TCP is a network protocol that establishes a connection with the server over a network (or the Internet) and allows two-way communication. The HTTP will traffic inside this TCP tunnel. TCP is a very useful protocol that helps keep things sane, it ensures data packets are read in the correct order and that packets that went missing during transmission are sent again.
Sometimes there will be another protocol layer between HTTP and TCP, called SSL. It is responsible for encrypting the data that traffics over TCP, so that it is transmitted safely over unsafe networks. This is know as HTTPS, and is just HTTP but using this additional layer.
Although almost always true, HTTP doesn't necessarily uses TCP. UPnP requests use HTTP over UDP, a network protocol that uses standalone packets instead of a connection.
HTTP is a plain text protocol, meaning it's designed in such a way that a human can understand it without using any tools. This is very convenient for learning.
If you're using Firefox or Chrome, you can press Ctrl-Shift-C to open the Developer Tools, and under the Network tab you will see every HTTP request your browser is making, see exactly what's the request, what the server answered etc, and get a better view of how this protocol works.
Explaining it in details is... too extensive for this answer. But as you will see it's not that complicated.
Is a http end point suppose to respond to requests from a particular client in order that they are received?
What about if it doesn't make sense to in the case of requests handled by cluster behind a proxy or in requests handled with NIO where one request is finished faster than the other?
Is there a standard way of associating a unique id with each http request to associate with the response? How is this handled in clients like http componenets httpclient or curl?
The question comes down to the following case:
Suppose, I am downloading a file from a server and the request is not finished. Is a client capable of completing other requests on the same keep-alive connection?
Whenever a TCP connection is opened, the connection is recognized by the source and destination ports and IP addresses. So if I connect to www.google.com on destination port 80 (default for HTTP), I need a free source port which the OS will generate.
The reply of the web server is then sent to the source port (and IP). This is also how NAT works, remembering which source port belongs to which internal IP address (and vice versa for incoming connections).
As for your edit: no, a single http connection can execute one command (GET/POST/etc) at the same time. If you send another command while you are retreiving data from a previously issued command, the results may vary per client and server implementation. I guess that Apache, for example, will transmit the result of the second request after the data of the first request is sent.
I won't re-write CodeCaster's answer because it is very well worded.
In response to your edit - no. It is not. A single persistent HTTP connection can only be used for one request at once, or it would get very confusing. Because HTTP does not define any form of request/response tracking mechanism, it simply would not be possible.
It should be noted that there are other protocols which use a similar message format (conforming to RFC822), which do allow for this (using mechanisms such as SIP's cSeq header), and it would be possible to implement this in a custom HTTP app, but HTTP does not define any standard mechanism for doing this, and therefore nothing can be done that could be assumed to work everywhere. It would also present a problem with the response for the second message - do you wait for the first response to finish before sending the second response, or try and pause the first response while you send the second response? How will you communicate this in a way that guarantees messages won't become corrupted?
Note also that SIP (usually) operates over UDP, which does not guarantee packet ordering, making the cSeq system more of a necessity.
If you want to send a request to a server while another transaction is still in progress, you will need to create a new connection to the server, and hence a new TCP stream.
Facebook did some research into this while they were building their CDN, and they concluded that you can efficiently have 2 or 3 open HTTP streams at any one time, but any more than that reduces overall transfer time because of the extra packet overhead cost. I would link to the blog entry if I could find the link...
We are trying to implement a proxy proof of concept but have encountered an interesting question: Since a single HTTP connection can, and indeed should, make multiple requests, and the HTTP transactions are sent via multiple packets due to TCP's magic, is it possible for a HTTP request to begin in the middle of a packet?
Bear in mind that this is not a theoretical question regarding possible optimization of the browser, but whether it actually happens in real life. It would be even better if someone could point me to a written reference on whether or not this is possible and if so how often it can occur.
Clarification update: We know that if we work in the HTTP layer alone we would not need to bother with this question, however we're trying to figure out if some advanced technique could be applied by working on the TCP layer first.
Assuming that you are talking about IP packets: Yes, it is possible that HTTP request starts middle of IP packet.
When you are using persistent HTTP connections, that is, using same TCP connection for several HTTP requests, it is fully possible that request boundary is middle of IP packet.
Also there is a TCP protocol between IP and HTTP. TCP contains also some headers so a IP packet may start with some TCP headers and rest of the packet consists of HTTP request.
HTTP request may also consist of several IP packets (in case of file uploads, transmission errors and following retransmissions etc).
However, I wonder why you are interested in packets if you are working at HTTP level. TCP should hide the IP packet details.
First of all, TCP is a stream based protocol and has no concept of packets. HTTP itself might have some kind of message or record delimiter, but TCP doesn't.
This page might be helpful: Structure of HTTP Transactions
From your question it sounds like you think that each read from a TCP socket is a "packet" of data. In reality, each read simply reads as many bytes as are in the buffer up to the maximum that you requested, without any concept of records or packets.
So for instance, lets say you read 2048 bytes from the socket, you could have the tail end of one transaction, followed by the beginning of a second response half way through the data you read, and only get the remainder of your second response on your next read from the socket.
If you're here in Jerusalem or near by maybe I could help you out.
Unless you are implementing your own TCP stack, you should not need to worry about the packets, but rather about the API that the TCP provides, in case of POSIX interfaces it would be the recv() or read(). So I treat the question then as "Can more than one HTTP requests come into a single read(), and can the HTTP request be split between multiple read() requests?" -- The answer to both would be "yes, it is possible".
An example of where this can happen is HTTP pipelining. This not frequent in real life (ironically, at least some of the browsers disable it by default because of "buggy proxies" :-) - but when it happens, can be a bit of a problem for the users to diagnose - especially if they have no access to the proxy.
One very notable place where it does happen by default apt-get in Debian-derived linux systems. Just install a Debian or Ubuntu server and try to use it through your proxy. You can do that by editing the /etc/apt/apt.conf.d/proxy file and placing the following there:
Acquire::http::Proxy "http://your.proxy.address:8080";
Depends of which abstraction layer of a packet you are talking about: there are many layers underneath HTTP.
HTTP --> TCP (byte stream) --> IP (packet) --> (possibly something else) Ethernet (frame) --> (possibly) some other transport
If you are talking about the IP layer, then yes the HTTP layer would start later on... Note that TCP presents a "byte stream interface" to its Client layer hence, no concept of packet here.
I think I understand where you are trying to go with this question.
If you don't use persistent HTTP connections, the HTTP GET request header is always the very first thing which is sent over the TCP connection, so we can be sure that the start of the HTTP GET request header does "not start in the middle of some TCP packet". But keep in mind that there may be one or more TCP packets without any user data, e.g. only a SYN, which may preceed the TCP packet with the start of the HTTP GET request header. And also keep in mind that the HTTP GET request header may not be contained in a single TCP packet.
If you do use persistent HTTP connections, the start of the HTTP GET request header for request number N+1 can start in the middle of a TCP packet, namely after the end of HTTP GET request body of request number N.
If you are asking these questions you are possibly "doing it wrong". As several other responders have already pointed out, in the vast majority of cases you should probably just be a TCP client and deal with a TCP stream of data and let the TCP code worry about the TCP packets. (Unless, of course, you are working on some special hardware which is looking at individual IP packets as they fly by and try to do some processing at the HTTP layer.)
If I make multiple HTTP Get Requests to the same server and get HTTP 200 OK responses to each one how do I tell which request maps to which response using Wireshark?
Currently it looks like an http request is made, and the next HTTP 200 OK response is quickly received so everything is in a the proper sequence. I have seen things to the contrary however. For example using the Google Maps API v2 I've made several requests for location information and then the information is received in an arbitrary order (closely resembling the order in which I requested it, but not necessarily perfect.)
So my intuition is I cannot assume that my responses will be received in a specific order, even though they may be in order most of the time. So I'm wondering how I can determine this order from the response.
Update: Clarification as to what I need. I just need to know that the server has received the request. It seems like I need to do this by looking at sequence numbers and perhaps even ACKS. The reasoning behind this approach is I'm basically observing a web app and checking it is sending the information and the information is being received.
Update: This has nothing to do with wireshark specifically. I believe it is confusing people so I removing it from the title. It has to do with the HTTP protocol on top of the TCP/IP protocol and how we map responses to requests.
Thanks.
After you have stopped capturing packets follow this steps:
position the cursor on a GET request
Open the Analyze menu
click "Follow TCP Stream"
You get a new window with requests and responses in sequence.
While I was googling for a complete different question, I saw this one and I think I can provide a more complete answer :
HTTP dictates that responses must arrive in the order they were requested, Therefore, if you are looking at a single TCP connection at a given time you should be seeing :
Request ; Response ; Request ; Response ...
Also in HTTP/1.1, there is support for "Pipeline" where the client doesn't have to wait for responses to arrive in order to issue the next request. What could be observed in such cases is :
Request ; Response ; Request ; Request ; Response ; Response ; Request ; Response
In the HTTP response itself, there is no reference to the specific request that triggered it.
Filipo's suggestion is classic when debugging / observing a single TCP connection, but, when observing multiple TCP connections, you can't click the follow TCP Stream because you'd have to do it for each connection.
If you have many TCP connections, and many requests/responses you will have to look at TCP Source port in the request packet, and the TCP dest port in the response packet to know which response is related to each tcp connection, and then apply the HTTP request/response order rules.
Also, Wireshark CAN decompress the response body, and it will do it automatically if all the response body has arrived, but it will do so NOT in the Follow TCP Stream.
I always use Wireshark to debug HTTP.
Seems like this ability is not provided by the HTTP protocol at the application layer so I must go down to the transportation layer to determine this. In my case the TCP/IP layer using sequence numbers.
HTTP only presumes a reliable
transport; any protocol that provides
such guarantees can be used; the
mapping of the HTTP/1.1 request and
response structures onto the
transport data units of the protocol
in question is outside the scope of
this specification.
Read more:
http://www.faqs.org/rfcs/rfc2616.html#ixzz0e20kxKcz
Don't use Wireshark to debug HTTP, use an HTTP debugger such as Fiddler2
I need a way to detect a missing response to a long running HTTP POST request. This problem arises when the network infrastructure (firewalls, proxies, unplugged cables, etc.) drops the response packets. The server may detect this failure, but the client cannot send additional bytes after the POST to probe the state of the TCP connection. The failure may be limited to a single TCP connection. For example I may be able to subsequently open a new TCP connection to the server.
I'm looking for a solution that still uses HTTP POST and does not change the duration of the server side processing.
Some solutions that I can think of are:
Provide a side channel interface to retrieve request & response history. If the history lists the response as having been send (presumably resulting in a TCP error) but I have not yet received it within a reasonable time I can generate a local error.
Use an X header to request that the server deliver "spurious" 100 Continue provisional responses on a regular interval. If I fail to see an expected 100 Continue or a non-provisional response I can generate a local error.
Is there a state of the art solution for this problem?
It sounds to me like you are using Soap for something that would be much better done using a stateful connection, or a server side push technology.