TCP connections work fine as I am able to converse with someone over zoom and teamviewer. However, whenever I attempt to access another webpage, I get a network error. Google seems to work fine for some reason but any webpage I go to listed by Google fails to connect. The only way I can open up my http connections is by ending a task called "init" inside of task manager. This shuts down my vscode as well as my ubuntu terminals I have running. If someone knows the solution please do tell. It's really annoying having to close out my vscode and terminals as well as my local servers to look up information and debug.
I found a fix to this issue.
So I was running a Windows Subsystem for Linux and my Windows Build was outdated as well as WSL. When I updated Windows and upgraded to WSL2, my issue was resolved and I don't seem to get any more network errors.
Related
I've written a code that utilizes OpenMPI for a message passing interface. However, when I run the code, it freezes everything on my computer except for my mouse and the only fix is a forced restart or a shut down.
I'm running the code from WSL and when I don't have my antivirus (Symantec Endpoint Protection) on, it will run just fine. The issue is, I need SEP to get onto the VPN I need for work.
I've tried running WSL as an admin and I'd try using other antivirus but SEP is the one I need for the VPN. Is this a common issue with MPI? Is there a way I can work around this without having to disable my firewall everytime I want to run the code?
I apologize if this is to vague and will gladly post any other information that may be useful. I'm just not sure what may be useful for right now.
I have an API in a .NET project that I'm running with Visual Studio Mac (8.4.3). I run it in release mode, and it opens a browser window with localhost:5000. The browser window says "ok". However, when I try to hit endpoints in that API, it fails very quickly. When I ran this API (ie. same code) from another server and accessed it via proxy, it ran fine. For example, when I ran it on a server whose IP was 162.250.198.98 and proxied into it, I would hit an endpoint like 162.250.198.98:3000/api/user and it would work, but now when I try to run localhost:5000/api/user, either from my app or from Postman, it fails almost instantaneously. When running it in Postman, I tried what it suggested by turning off 'SSL certificate verification' in Settings, but no change.
Can anyone advise me on how to approach troubleshooting this?
Wait, so You are saying that while trying to call API on 162.250.198.98:3000/api/user You are fine but while trying to do the same thing on localhost:5000/api/user You are getting an error? Would it might be possible You have Your API configured to receive calls at 3000? :)?
No, but really - please chech it out, maybe it is that simple, I'm couting on it :).
You can change/check it in Visual Studio: main project > Properties > Debug > App URL.
Recently I added email sending capability to my Meteor app, using both the email package, and the account registration APIs to send emails. The other day, after having tested this thoroughly on my dev machine, I deployed it to our production server using Meteor Up. Once deployed, I did a quick check that the email APIs were working properly, and let it be. A day or two later, I made some minor changes, wrapping these email APIs in a Meteor.defer method to speed up the UI. I tested the changes locally (all fine), and re-deployed. I also ran apt-get update on my server after seeing a notification there were some new security updates available. After doing this, the email system no longer works. I tried reverting back to my previous configuration, and it still isn't working. I'm getting a timeout error:
Exception while invoking method 'forgotPassword' Error: connect ETIMEDOUT
I was wondering if anyone had any ideas on what might be causing this timeout (a blocked port?...how can I diagnose this?). Given my SMTP port is working on my development machine, it doesn't seem to be an issue with my code, but rather either with the MUP deployment, or Ubuntu configuration. I'm not super familiar with configuring Ubuntu servers. Any suggestions on how to go about de-bugging would be greatly appreciated!
We got a similar problem, and it was solved by opening the needed port in EC2. thanks to https://kylegoslin.wordpress.com/2012/06/05/116/
Today I stopped/started my GlassfishV3 instance and now I cannot access the addmin console located at http://servername:4848/. The screen says: "The admin console is loading..." This is going on forever now.
I have tried as follows:
I have tried adding the following entry to my domain.xml located at /glassfishv3/glassfish/domains/domain1/config as suggested in another Stack Overflow Q&A but after restarting the server still no luck.
<java-options>-Dcom.sun.enterprise.tools.admingui.NO_NETWORK=true</java-options>
I have also installed glassfishv3 on my local machine and cannot recreate the problem.I can go to http://localhost:4848 without any problem.
I have also looked at the server.log and jvm.log files located under the /glassfishv3/glassfish/domains/domain1/logs and nothing there that shed some light.
Any help would be very much appreciated
I had similar symptoms, and I tried some of what Dario had suggested as well, but it didn't work. It could be that I had a unique configuration for my dev env: I'm running Glassfish 3.1 on a VirtualBox Ubuntu 11.04 64-bit guest on a Windows 7 64-bit host. Quite by accident, I discovered an additional symptom: if I turned off the network on the Ubuntu guest, the console would load successfully on a localhost browser instance. That is, on the Ubuntu guest with the network off, I could successfully navigate to http://localhost:4848 and show the Glassfish admin console as expected. However, if the Ubuntu guest's network was on, I had the exact behavior suggested by the original poster: http://localhost:4848 would just sit forever on the inial loading page.
To make a long story short, I found that adding the following argument to the JVM options for server-config fixed the problem:
-Djava.net.preferIPv4Stack=true
When I made that change and restarted the Glassfish server, everything worked.
(Note that I also had in place some of the other settings recommended above, i.e., NO_NETWORK=true, and I'd adjusted the JVM memory footprint and set it to -server instead of -client. It could be that these settings are required as well, though they weren't sufficient on their own in my case.)
I was having this exact same problem. I could deploy in run mode, but it would hang forever in Debug mode. IntelliJ was hanging on the breakpoints. I muted the breakpoints, and glassfish3 worked good as new. I didn't have to change any domain.xml settings. Check your breakpoints!
I found a solution to my problem. Setting the java-option to NO_NETWORK to true did not work so I upgraded from 3.0.1 to 3.1 and it got fixed. Not immediately though, I had to stop/start the Glassfish server a couple of times before I got into the admin console without any really long delays.
Solution
The solution was to upgrade from the command line using the pkg utility.
You can find the steps in this link:
http://download.oracle.com/docs/cd/E18930_01/html/821-2437/gkthu.html#gktjf
Or do as follows:
Go to as-install-parent/bin
./pkg image-update
as-install-parent/glassfish/bin/asadmin start-domain --upgrade domain-name
as-install-parent/glassfish/bin/asadmin start-domain domain-name
UPDATE
I had peformance issues again and I found this other solution in Joshi's tech blog:
http://joshitech.blogspot.com/2009/09/glassfish-application-server.html
Basically add the following jvm options in the domain.xml. It should increase Glassfish boot up and deployment performance:
<jvm-options>-server</jvm-options>
<jvm-options>-Xms3000m</jvm-options>
<jvm-options>-Xmx3000m</jvm-options>
<jvm-options>-XX:MaxPermSize=192m</jvm-options>
<jvm-options>-XX:NewRatio=2</jvm-options>
<jvm-options>-XX:+AggressiveHeap</jvm-options>
<jvm-options>-XX:+AggressiveOpts</jvm-options>
<jvm-options>-XX:+UseParallelGC</jvm-options>
<jvm-options>-XX:+UseParallelOldGC</jvm-options>
<jvm-options>-XX:ParallelGCThreads=5</jvm-options>
I don't know if you are referencing this answer, but there is a second step described (disabling update module).
Two more ideas:
Check if the NO_NETWORK=true option really works (there should be no ads in GF admin console)
Watch the server.log (glassfish-install-dir/glassfis/domains/domain1/logs) during startup and look for the last log entry before the delay occurs. This could be a hint for the source of the delay.
Beware of blindly following Dario's example unless you've lots more RAM than most do.
-Xms3000m gives 3gb to Glassfish. Do YOU have that much spare RAM?
I tried this on my 4gb Mac with 1gb for Glassfish. Made no discernable difference at all...performance still sux.
When I yesterday returned to Visual Web Developer I was no longer able to run/debug my projects. Clicking the green play button launches ASP.NET Development Server (and it shows up in the systray) but the browser only shows the error message "Firefox is not able to connect to localhost:58127" (translated from Swedish). IE7 says "Cannot show web page".
I cannot figure out why this happens. It worked a couple of weeks back. Could there be a Windows setting that mess things up? (I've tried to disable the firewall without any change.)
Are you using Vista? I've had the same issues with recent Vista updates.
Firstly, make sure Visual Studio is running "As Administrator".
Secondly, when the browser launches, replace "http://localhost:" with "http://127.0.0.1:". If that works, then its because a Windows Update messed up your hosts file.
If this is the case, make sure you hosts file has this line in it, uncommented: "127.0.0.1 localhost"
my hosts file is in this directory: "C:\Windows\System32\drivers\etc"
yours will be something similar to that.
Are you perhaps using NOD32 or any other antivirus that may cause problems?
I encountered this issue today and just wanted to elaborate because my hosts file had "127.0.0.1 localhost" already defined.
I was able to see the default IIS site by referencing localhost but when I tried debugging in my IDE it would always display "cannot display webpage" in IE and "Oops! Google Chrome cannot connect to localhost" in Chrome.
I opened a command prompt and typed "netstat -a" and reviewed the results. I saw that my port used by my debugging web server was listed as "LISTENING" on the local address of [::1] only:
TCP [::1]:64212 [ComputerName]:0 LISTENING
What's unusual to me is that debugging worked for a period of time and then it seemed like all of a sudden it stopped. The first couple times it happened I re-installed Visual Web Developer Express 2010. This became rather annoying because it was a long process and the problem continued to resurface after what seemed to be an arbitrary period of time.
This latest time I changed my hosts file to include "::1 localhost" (the opposite of this solution and numerous others I found online) and that has resolved my issues with my debugging environment.
I'm grateful this resolved my issue but am still curious as to why and how my debugging environment seems to change. Additionally, I'm curious why there are multiple loopback addresses other than 127.0.0.1. Is "::1" an ip6 standard? If so, shouldn't localhost be routing to 127.0.0.1 and interpreted by the tcp/ip stack as the same as ::1?
I had this problem with Visual Studio 2013. I have set the Firewall system manually. This means that, at the time of communication by programs Firewall notify me. Incorrectly linked to "devenv.exe" was blocked by the Firewall. Correct mode of communication "devenv.exe" will solve the problem. in your case cheeck Firewall options and filtered communications.