I need to install few packages that should be installed with remotes::install_github() like
"acidgenomics/basejump" or "satijalab/seurat".
During the installation, it need to upgrade few other packages version. The BiocManager::install program cannot find those versions and I had to install those dependencies packages version with:
R CMD INSTALL IRanges_2.20.2.tar.gz
Then other packages, that use the same packages stop working. like DESeq2,
I get the error:
Error: package or namespace load failed for ‘DESeq2’:
objects ‘rowSums’, ‘colSums’, ‘rowMeans’, ‘colMeans’ are not exported by 'namespace:S4Vectors'
I found few answers that say it happen (like url)
remotes::install_github() isn't picking up the correct Bioconductor
devel repos, whereas installing with BiocManager::install() does work
as expected.
we have the R 3.6.0 installed as a module and a lot of users uses the same R version. I need all packages to work for everyone.
How can I make all variety packages versions to work?
Finally, I install new version of R 3.6.3 with Bioconductor 3.10 and all the packages install right.
Related
How to install RQDA version in R version 4.02?
Warning in install.packages :
package ‘RQDA’ is not available (as a binary package for R version 4.0.2)
You could have a look at the fork at https://github.com/RQDA/RQDA. Since packages that RQDA rely on have been archived on CRAN (RGtk and GtkWidgets), RQDA was archived subsequently.
The official published package has been archived, because of some of its dependencies. However, the package can still be installed from the archives. The steps to do this are as follows:
Install RGtk2 from CRAN.
Install the archived versions of gWidgets and gWidgetsRGtk2. devtools::install_version can do this quite easily when the right arguments are passed to the function. Consult the help file.
Call library(RGtk2) at the R console. You will be prompted to install the GUI library Gtk+, if you don't already have it.
Install the archived version of RQDA from CRAN. If you are using a 64-bit system, you will have to pass the --no-multiarch flag, or else it will fail.
Launch RQDA with library(RQDA).
I have used these steps to successfully install the package on Windows 10 64-bit running R-4.0.3. Others have used a similar algorithm to do it on Linux and Mac with only slight variations.
Since I had to replicate this for some members of my team I wrote an R script that can be used to carry out the installation. You are welcome to try it out.
That said, development on the main RQDA branch has recommenced, so I expect a resolution of this issue in the near future.
I'm having a bit of a pickle right now with the package tidyverse, that I need for an assignment on layering maps. I tried installing the package using install.packages("tidyverse") and install.packages ("tidyverse", dependencies = TRUE) but when I ran library(tidyverse) it wasn't installed. I searched online and found that I had an older version of RStudio IDE so I uploaded the latest version (1.3.1056).
After installing the newest version, I reinstalled the package but R tells me the following:
"Rtools is required to build R packages but is not currently
installed".
So, I did it, but the R tells me Rtools package is not available for R version 3.5.3.
What can I do to use tidyverse?
It could be a permissions issue, try setting the directory for where you install R packages/libraries on your computer using libpaths. I have to do this on my work laptop because the university has it set up to store things like this in a tempporary directory on the remote server which isn't desirable.
.libPaths("C:/R")
.libPaths()
I updated R 3.4.4 to R 3.5.0 today. And my package cannot pass R CMD check anymore. It fails at checking whether package can be installed ... ERROR.
In another hand my package works, I can install it and use it as long as I don't check it.
The error is the following:
Error: package or namespace load failed for ‘sp’:
package ‘lattice’ was installed by an R version with different internals; it needs to be reinstalled for use with this R version
Error : package ‘sp’ could not be loaded
I tried to reinstall lattice these ways:
sudo apt-get --reinstall install r-cran-lattice
or
remove.packages("lattice", lib="~/R/x86_64-pc-linux-gnu-library/3.5")
install.package("lattice")
The package lattice is installed correctly in both cases. But it does not solve my problem. Also I ensured to have a single version of lattice removing either the r-cran one or the self compiled version. Nothing works.
Edit By the way I can do library(sp) or library(lattice) it works. But not with R CMD check
The error message tells you that the binary you are attempting to install comes from an insufficient / incompatible R version.
Two fixes:
Install from source as you did. After that check with AP <- available.packages() that you really only have one.
Use the correct binarie: read this README at CRAN and switch to Michael's 'R 3.5' repos. Many of us have been doing that for weeks.
Lastly, the r-sig-debian list is a friendly place for these questions and more. Subscribe first so that you can post.
On my Win 7 Ent x64 I installed RStudio R-3.4.2.
I installed few packages that I need (RPostgreSQL, sqldf, etc..)
But when I'm executing code, these libraries give me errors:
library(RPostgreSQL)
Error: package ‘RPostgreSQL’ was installed by an R version with different internals; it needs to be reinstalled for use with this R version
In addition: Warning message:
package ‘RPostgreSQL’ was built under R version 3.5.0
All of the packages are downloaded from CRAN. RPostgrSQL is 0.6-2 version.
I'm pretty sure that solution is quite simple, but I searched a lot and still cannot find the solution.
How did you install the package RPostgreSQL? If you used
install.packages("RPostgreSQL") on your Windows it installed using binaries, which may have been built using a different R version. In your case, 3.5.0 vs 3.4.2.
Try using install.packages("RPostgreSQL", type="source"). This way your machine will compile the package from source using your version of R, and it should work.
If the package needs C/C++/Fortran compilation, you will als need RTools installed on your machine.
You can try to find all packages installed with the old version R like this:
grep 'Built: R 3.4' /usr/local/lib/R/site-library/*/DESCRIPTION > temp
and then you can uninstall the packages with remove.packages()
I have been trying to install the package "doby" from RStudio (ver 0.98.501 ) on ubuntu 13.04 but it keeps throwing the following warning and the package does not get installed.
Warning in install.packages :
package ‘doBy’ is not available (for R version 2.15.2)
I have followed all the instructions given here :
http://www.r-bloggers.com/installing-r-packages/
Can someone please suggest where I might be going wrong ?
If you are on Ubuntu, please see this README for Ubuntu from CRAN --- it will allow you to get to the current version of R (today 3.0.2, in a few days 3.0.3) with mininal effort.
Once you have a current R version, getting the doBy package (which depends on it) installed is a piece of cake too.
If however you prefer to stay with your version of R, you can manually fetch an older version of doBy from its CRAN archive. Download to, say, /tmp and run R CMD INSTALLby hand on it.
From http://cran.r-project.org/web/packages/doBy/index.html, package doBy depends on R version 3.0 and above. Your R version is 2.15.2. You will need to install a later version of R, and then change the settings in Rstudio to target the updated version.