Crpyto system with master key and derived keys - Is this possible? - encryption

I've been doing some searching and still do not know if this is possible. What I want is for a message to by encrypted by our system and decrypted by a "master key" and also a 3rd party.
This encrypted message needs to be decrypted by 2 entities
-A 3rd party (which we want the control to shut off their ability to decrypt)
-Our system (which we want to always be able to decrypt no matter what, master key?)
From some research I was doing there is a concept of master key and derived keys
Does this following system exist?:
Master Key - can decrypt anything encrypted by derived keys
DerivedKey1 -> Encrypt data with this key and be able to decrypt with Master Key OR DerivedKey1
DerivedKey2 -> Encrypt data with this key and be able to decrypt with Master Key OR DerivedKey2 but NOT derivedKey1
Any terminology I should be using to search for answers would be helpful, also any crypto systems that do this already would be great to know.

Yes, I mean deny any new messages sent from our system to be decrypted
You can encrypt the content with a random key (data key).
Then you can encrypt the data key for each intended recipient (master key and any 3rd party) using its shared or public key.

Related

End to End Encryption Using Apache Pulsar Per Tenant/Topic

I'm trying to incorporate end to end encryption using Apache Pulsar. So far the examples I've seen look similar to http://pulsar.apache.org/docs/en/security-encryption/
I saw that the encryption key (public / private key) is fetched every 4 hours in the key rotation section. It seems to indicate that you can only have a single key to encrypt the messages you send.
I’d like to be able to use different encryption keys for different topics/tenants. Does pulsar support different encryption keys for different topics?
Basically my client will pull a different key depending on which tenant the data belongs to and encrypt any messages pertaining to that specific key using pulsar's end to end encryption.
How would this look?
Is it as simple as creating a new producer any time I want to use a different key for encryption?
Producer producer = pulsarClient.newProducer()
.topic("persistent://my-tenant/my-ns/my-topic")
.addEncryptionKey("myTenant1Key")
.cryptoKeyReader(new RawFileKeyReader("tenant1_pubkey.pem", "tenant1_privkey.pem"))
.create();
So far I've used the pulsar client to send encrypted messages using a local private/public key pair. Can I just switch out the key pair and instantiate a new producer anytime I want a message to be encrypted differently? I've tried asking around and can't find the right answer.
Absolutely, you are creating separate producers for different topic and can use different keys for each producer.

Cryptography: Securing Digital Signature and Key Pair

I have developed an encryption solution which is based on Hybrid Encryption as:
Sender end:
The message hash will be calculated.
Hash will be signed with private key of sender.
Hash will be encrypted with private key of sender.
A symmetric key will be generated.
Symmetric key will encrypt the message.
Symmetric key will then be encrypted with public key of receiver.
Recevier end:
Decryption of Hash with public key of sender.
Verification of sign with public key of sender.
Decryption of Symmetric key with private key of receiver.
Decryption of message with Symmetric key.
Now I want to save the hash in a file, the digital sign in a file, key encryption in file, actual message encrypted in a file and the key pairs.
In what file type shall I save all of these?
whether it shall be a CSV, TXT file or something else?
I have to keep the keys secure and the digital signature too..
Please guide!
As for the sender: Steps 1, 2 and 3 are commonly combined into a single signature generation operation. You don't do them separately. The same for step 1 and 2 of the receiver for signature verification (where you are missing the hashing step of the message, by the way).
Modern cryptography is based on bytes, so generally you define a single binary container format so that you don't have to expand the ciphertext (compared to the plaintext) needlessly. Such a container can contain multiple values: encrypted key, and encrypted content that consists of the message and signature. Generally there is also a header containing a version string and an ID of the required keys to name just a few.
Of course many container formats have been defined for the hybrid cryptography that you're currently using, with CMS (with a hierarchical PKI) and (Open)PGP (with a web-of-trust based PKI) being the most well known ones.
Otherwise it is up to you. Generally you'd encode the ciphertext / signatures using base 64 if you require text based storage. Do include a version string somewhere in the header and create a document to describe your protocol.

Public / Private Key Cryptography for offline systems

Hi Crypto experts out there, are there any best practices around distributing an ecnrypted package to multiple end user systems, specially if the end system are offline ones? in context of assymetric crypto.
is it must to create unique pub/pvt key sets [ per end user system] and encrypt the same package many times uniquely with the pub keys, resulting in a specific package per end user system? how will this scale?
will it be a good practice to sign the original private key[ corresponding to pub keys used to encrypt the package] with senders private keys and then enrypt using end user systems pub keys and share it directly with end user? through trusted communication.
or, encrypt the pvt key with end user systems public key, sign with senders private key and re-encrypt[symmetric] this with the hash of certain string uniquely identifying a end user system? This hash should be programtically reproducible using system unique identifiers later during decryption processes. This way, to retreive the original private key to decrypt the package, it will require both a corresponding pub key[end user clients] as well as end user machine [the hash of string to be generated at runtime on end user system.] and senders public key to manage the authenticity?
Thank you for any feedback!
I am not an expert, but as I understand asymmetric encryption, you can generate a key pair in the distribution center.
The private key stays secret in the distribution center.
To each offline client you provide the public key (as a file).
Each client generates a secure password for symmetric encryption, and encrypts it using the public key.
The encrypted symmetric key is sent to the distribution center.
The distribution center should associate the encrypted symmetric password to the client that sent it.
At the time of encrypting the package for the specific client, the distribution center will decrypt the symmetric password using the private key, and use it to encrypt the package.
Then the package can be sent to the client, who will use it's own password to decrypt the package.

How do I encrypt an email using a Yubikey?

I am fairly new to PGP encryption. I generated a new key pair last week on a Yubikey, while previously I had only used a private key that I generated on my machine. I use thunderbird enigmail for key management. This is probably a stupid question but I don't actually understand how to encrypt an email using the private key stored on my Yubikey. I can decrypt just fine but can't figure out how to compose an encrypted email from the new key. Using my old key pair, it's automatic - how do I actually encrypt using the right private key? At what point do I enter the Yubikey and pin? (I'm not all that technical and I use encryption for one specific project, so I appreciate dumbing down something that is probably very obvious.)
Using keys generated on a Yubikey is a practically identical process to using your old keys, with one extra step of set up.
To use keys stored on a Yubikey, you need "key stubs" registered on your PGP system. Basically, these are references that tell your PGP software "This private key is located on smartcard number #123456." Once you have the stubs to the keys you need, Enigmail should treat the Yubikey-stored keys like any other PGP key.
I'm only familiar with GnuPG, so specifics may vary, but using GPG you need to
Have a copy of the public key imported to your system from a key server or the like.
Import key stubs from your smart card (in this case, your Yubikey) using:
gpg --card-status
After that, checking your private keyring should reflect that you have stubs pointing to private keys stored on a smart card (denoted by the > after sub). I.E.
gpg --list-secret-keys
----------------------------------------------------
sec# rsa2048 2018-01-02 [C] [expires: 2020-01-02]
ABCDEF123456789ABCDEF123456789ABCDEF1234
uid [ ultimate] My Name (My PGP key) <anAddress#somesite.com>
ssb> rsa2048 2018-01-02 [S] [expires: 2018-12-31]
ssb> rsa2048 2018-01-02 [E] [expires: 2018-12-31]
ssb> rsa2048 2018-01-02 [A] [expires: 2018-12-31]
At this point you can use sub keys of CDEF1234 as if there were on your system. Your PGP software ought to handle checking the card is inserted and dealing with PIN entry.

Can I use asymmetric encryption with two private keys?

According to wikipedia (and other sources), asymmetric encryption always works like this:
Party A has a public and private key
Party B encrypts stuff with A's public key
Party A decrypts stuff with their private key
However, I don't want party A to be able to encrypt their own data and only want to them to be able to decrypt it. Using the asymmetric logic this would result in:
Party A has a private key
Party B has a private key (which is party A's public key)
Party B encrypts stuff with their private key
Party A decrypts stuff with their private key
We will be using this for some sort of license generation/checking. Our clients may not generate a license, but the license file must be readable on the client side.
Is this still asymmetric encryption or should I be looking at different methods?
Party A being able to encrypt messages using the public key is absolutely no problem.
Only you could decrypt them (with your private key) and since you have no reason to do so encrypting something with the public key embedded in your application would cause no harm - just a bunch of useless data the user has since he cannot decrypt it.
For the licensing you simply encrypt (or sign - that's enough and then people will be able to read the restrictions etc in the license file but not modidy them) your license file using your private key. The application then decrypts the file using the embedded public key (or validates the signature).
A user extracting the public key and signing a custom license file with it could not use it since it would only work if your private key was embedded in the application (since that's the key necessary to decrypt something encrypted with the public key).
However, he could very well replace your public key with a custom one (where he has the private key, too) and then sign/encrypt his own license file using his private key. That's not a cryptographical issue though - you simply need to add some anti-cracking/modification measures to make it harder to replace the embedded public key. You could do some checksum validations for example.
You have your private key in the safe, and publish your public key. When you create a license you encrypt it with your private key. The client can only decrypt it with your public key.
If you want to restrict your license to a client, ask the client to generate their keypair, and send their public key to you. You then encrypt the license with their public key, then sign it (or encrypt it again) with your private key.
When the client receives the license they will have to
1. verify the signature of (or decrypt) the license you sent them
2. decrypt the verified data using their own private key.
This ensures that 1. only you can send them the license and 2. only they can decrypt it.
What you'd generally do is generate you license on your side, and encrypt it with your private key. Then your client can read it using your public key. This is (very broadly speaking) how certificate schemes (such as used in secure online browsing with HTTPS) work. And yes, that still absolutely counts as asymmetric encryption.
Based on what you're saying, asymmetric encryption is still what you want, it just needs to be done in a different way than you're used to thinking about it.
Let's say you generate a key pair for A. You send A one half of the pair: it doesn't really matter but we'll call it the private half. You encrypt using the public half and send it on to A. Then A can decrypt it. But A won't be able to encrypt a message that appears to come from the A public key since they only have the private half of the key and you can't figure out the other half of the key if you only have half of it, no matter which half you have. So A could only encrypt messages that could be decrypted by the public key that you have kept as a secret.
Of course, as other posters have already said, there are better ways to set up this protocol. Just trying to explain why this is not really an issue once you understand the details of asymmetric encryption and look past what we like to call the key halves and how we usually use them.
You could have a look at Rhino licensing : http://hibernatingrhinos.com/open-source/rhino-licensing/introduction
The other answers already said how to do it ... here just a note that (at least with RSA) the scheme you described in your question is not secure, if it depends on B's key staying secret.
For RSA, the public and private keys are really asymmetric, and you can't simply swap them and expect the same security properties.
If your party B (Bob) encrypts multiple messages with the same public key, an attacker which reads these (ciphertext) messages can with little effort get your public key. The attacker does not get the plaintexts or the private key, but the public key will always become really "public".
For A (Alice), it is even possible to create the public key from the private one, without any message being encrypted with the public one.
I suppose similar caveats are there for other asymmetric cryptosystems - always use them only like they are specified, and proven.
In this case, you would combine two key pairs: B's one to sign/verify the message (to make sure the message was sent by B), and A's one to encrypt/decrypt the message (to make sure only A can read it).
Yes. You can do it with RSA - to do a Diffie-Hellman-like exchange, because not only do the keys from 1 associated pair commute, but keys from different keypairs can commute as well.
alice -> bob: alice.pub
bob -> alice: bob.pub
alice: r = random.secret()
alice -> bob: ( r * (alice.priv * bob.pub) )
bob: r = ( (r * (alice.priv * bob.pub)) * (bob.priv * alice.pub) )
Notice that we did something odd here. We mixed RSA operations from different keypairs in one operation. The objects in parenthesis are effectively a new virtual RSA key, and neither one of these keys is public. Had we tried to create that RSA key directly, either alice or bob would know both keys of the pair. This keypair is effectively a secret key where you write to one end and only the other side can decrypt it, yet you cant decrypt what you wrote yourself, and nobody else can encrypt messages to the other side.
I have never seen anyone mix keypairs like this, but I tested this by writing the code. I had to do something unusual though because normally, applying the private key to the message is for 'signing'. But signing usually hashes the secret and applies the private key to a hash of it; something we do not want. So in my code, once I had the RSA components (D,E,N) extracted into arbitrary precision numbers... ie: decrypt,encrypt,modulus ... I just did:
wormholeSend(me,you,msg) =
(((me ^ {me_D}) \% me_N) ^ {you_E}) \% you_N
The thing that makes it a little tricky is that E (encrypt exponent) is actually a predictable value, but the modulus N is in the public key (E,N). D is private to each party. We need to be careful here, because you and I have a different modulus N.
I did this because I wanted a system where a program is authorized to encrypt keys that can be decrypted by users. Doing this, the user cannot encrypt keys, and the program cannot decrypt them.

Resources