I am using Oracle Sql Developer (Version 18.4.0.376).In Sql editor all DBMS_OUTPUT.PUT_LINE are not disabled automatically.
Please refer the below screen shots
Can any one suggest me, How to get ride this issue.
Your database is too old.
10g database and the jdbc driver we use from 2019 won't play nice for getting dbms output.
You're using xe - get a newer one, either 11g or 18c. Both are still free.
Install the latest database like 18 or 19c
Establish the oracle connection with user credentials
Open the sql editor and execute the sample pl/sql procedure
Choose the dbms output window from views menu and set the buffer size as you required.
Related
The FoxPro ODBC on my machine is only able to connect to certain tables in the ODBC Connection. When I try to connect to specific tables in the same connection I receive the error [Microsoft][ODBC Visual FoxPro Driver]Not a table.( #123). However, I am successfully connected to other tables without an issue. I know these tables I am unable to connect to aren't corrupted because I am able to view the data in them using Visual Fox Pro.
Any suggestions would be appreciated.
First I'd use the Visual FoxPro OLEDB driver instead of ODBC. It's faster and more fully featured.
Then check whether the TableValidate setting is affecting it. To check that, back up the data then open the table exclusively in Visual FoxPro and issue the following in the command window:
append blank
go bottom
delete
pack
This will append and then delete a blank record, forcing the header counters to be recalculated. Then try it via the connection.
Also try turning tablevalidate off for the OLE DB driver as follows.
Create a text file called CONFIG.FPW in the same location as vfpoledb.dll, on a 64-bit machine this will be in 'C:\Program Files (x86)\Common Files\System\Ole DB'.
In the text file just put one line:
TABLEVALIDATE=0
And retry.
First: Do not use ODBC driver UNLESS your tables are VFP6 and earlier compatible. The last ODBC driver released was only for 6 and earlier. If you still need to use ODBC then check Sybase ADS driver. It is compatible with later versions too and local mode is for free.les
Second:Be sure that the tables you are trying to open are really not corrupted (not a table error is often occurs when the header info is off by pne record = you can check the details on "Not A table" entry on foxwikis. You might be looking into two different files when you check from VFP and through OLEDB driver. You can specify the fullpath to be sure.
I am new with Visio. Is it possible to generate an empty database from a database scheme? I am trying to generate a SQLite database from a Visio database scheme. I have tried to use reverse engineering with different SQLite drivers but could never see any tables to select in the reverse engineer wizard......
BTW, Is there any other tools that could build a SQLite database easier? I tried SQLite Manager, SQLite2009 pro enterprise manager. Either of them seems to be very user friendly. Also tried OsenXP Suite which did not work at all either...
Hope this could help
there is an answer here
https://stackoverflow.com/a/3867566
seems you have to install ODBC driver
I've also tried using MySQL database, and need ODBC to connect to VISIO. The steps are here
http://sajjadhossain.com/2009/02/12/reverse-engineering-mysql-database-with-microsoft-visio/
Maybe the step is same because using ODBC
Unfortunately, I found error, if the table name is longer than 16 characters, then the visio will error.
I use oracle 11g , and sql develper stop working becouse of virus attack :(
THE PROBLEM is that i need to restore my database schema , the data is not important to recover , sql plus work properly , can i recover the schema from sql plus or folders of oracle program ???
pleaaaaaaaaaaaaaaaaaaaaaaaaaaaase help :(
Why would a virus that caused SQL Developer to stop working have an impact on the database schema? You also write that SQLPlus works. Can you connect to the database with SQLPLus? Please provide clearer information on what the problem is.
i want to import data from MYOB through odbc connection
i have successfully created the odbc connection and select queries are working fine.
i want to have a look at MYOB database schema so that i can write queries to retrieve data.
how can i get the schema of the MYOB database?
i made this odbc connection in server explorer, the connection has been succeeded but the server explorer cant show me the list of tables/views in the connection.
kindly help me in this regard.
The following links to the developer resource kit. This kit contains a full shcema description.
http://myobaustralia.custhelp.com/cgi-bin/myobaustralia.cfg/php/enduser/std_adp.php?p_faqid=30548
If the above link expires try this one:
http://myob.com.au/partners/become-a-partner/developers-1258090671897
There are documentations found in the installation folder of the ODBC drivers.
usually found c:\MYOBODBC[xyz]\doc or help.
BTW, you need to have a developer key to enable write access to the MYOB database.
Hope this helps.
I use Netbeans IDE (6.5) and I have a SQLite 2.x database. I installed a JDBC SQLite driver from zentus.com and added a new driver in Nebeans services panel. Then tried to connect to my database file from Services > Databases using this URL for my database:
jdbc:sqlite:/home/farzad/netbeans/myproject/mydb.sqlite
but it fails to connect. I get this exception:
org.netbeans.modules.db.dataview.meta.DBException: Unable to Connect to database : DatabaseConnection[name='jdbc:sqlite://home/farzad/netbeans/myproject/mydb.sqlite [ on session]']
at org.netbeans.modules.db.dataview.output.SQLExecutionHelper.initialDataLoad(SQLExecutionHelper.java:103)
at org.netbeans.modules.db.dataview.output.DataView.create(DataView.java:101)
at org.netbeans.modules.db.dataview.api.DataView.create(DataView.java:71)
at org.netbeans.modules.db.sql.execute.SQLExecuteHelper.execute(SQLExecuteHelper.java:105)
at org.netbeans.modules.db.sql.loader.SQLEditorSupport$SQLExecutor.run(SQLEditorSupport.java:480)
at org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:572)
[catch] at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:997)
What should I do? :(
The current version of Zentus SQLiteJDBC is v053, based on SQLite 3.6.1. It will not open a 2.x SQLite database. Perhaps you can use SQLite 2.x command line tool to .dump your database, and the Sqlite3 command line tool to .load it. The use Zentus SQLiteJDBC to access the new SQLite 3.x database.
Alternatively, use a JDBC driver that supports SQLite 2 such as this one.
It's againg me...
I have made two mistakes during my first attempt. After setting CLASSPATH as a system variable (hope I didn’t broke smth else :)), putting sqlite_jni.dll to the system32 folder and correcting JDBC url I have got a success :)
I also have downloaded their SQLite ODBC wrapper. Installed it and made a connection to my SQLite2 database via ordinary and UTF8 based ODBC driver. I also used built in NetBeans JDBC-ODBC Bridge driver to be able to set up this connection.
All three connections have been created but:
ordinary ODBC driver: I see text data in a wrong encoding. All other columns are displayed correctly
UTF8 ODBC driver: I don’t see text data at all. All other columns are displayed correctly
JDBC driver: I don’t see any column at all. "Select * from my_any_table" always returns an empty single column
I have Russian based data in my database.
So...currently I have returned to sqlite command line interface :))