Related
When installing rJava using the install.packages("rJava") command I get the following error:
checking Java support in R... present:
interpreter : '/usr/bin/java'
archiver : '/usr/bin/jar'
compiler : '/usr/bin/javac'
header prep.: '/usr/bin/javah'
cpp flags : '-I/usr/lib/jvm/java-6-sun-1.6.0.20/jre/../include -I/usr/lib/jvm/java-6-sun-1.6.0.20/jre/../include/linux'
java libs : '-L/usr/lib/jvm/java-6-sun-1.6.0.20/jre/lib/amd64/server -L/usr/lib/jvm/java-6-sun-1.6.0.20/jre/lib/amd64 -L/usr/lib/jvm/java-6-sun-1.6.0.20/jre/../lib/amd64 -L -L/usr/java/packages/lib/amd64 -L/usr/lib64 -L/lib64 -L/lib -L/usr/lib -ljvm'
checking whether JNI programs can be compiled... yes
checking JNI data types... configure: error: One or more JNI types differ from the corresponding native type. You may need to use non-standard compiler flags or a different compiler in order to fix this.
ERROR: configuration failed for package ‘rJava’
I have the Java JDK installed and java -version returns the following:
$ java -version
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
When Googling around for the error I see that others are having the same issue but not finding a solution other than "install the whole JDK, not just the JRE" which I have done.
The other thing I read was to run sudo R CMD javareconf which runs quite happily with no errors.
Any ideas what my problem is?
[[EDIT]]
It's been a few months since I had this problem. I had initially solved this by editing my Java paths, as illustrated in the answer I posted below. I recently ran into the same issue on a new Ubuntu install. I tried Dirk's recommendation to use apt-get to install the rJava package. It worked perfectly. What I failed to appreciate initially is that installing packages using the Ubuntu apt-get method is fundamentally different than just loading the same package using install.packages() inside of R. The Ubuntu packages solve some issues which I didn't realize or appreciate.
Wouldn't
apt-get install r-cran-rjava
have been easier? You could have asked me at useR! :)
Turns out my problem was an issue with my JAVA_HOME environment variable. Yes, shocking I know. My initial setting for PATH and JAVA_HOME looked like this:
export JAVA_HOME=/usr/lib/jvm/java-6-sun
export PATH=$PATH:$JAVA_HOME/bin
And I added /jre so it now looks like this:
export JAVA_HOME=/usr/lib/jvm/java-6-sun/jre
export PATH=$PATH:$JAVA_HOME/bin
Everything in Java seemed to work fine without the /jre but rJava would not. Odd.
That is how I make it work :
In Linux (Ubuntu 16.04 and 20.04 worked confirmed)
sudo apt-get install default-jre
sudo apt-get install default-jdk
sudo R CMD javareconf
in R:
install.packages("rJava")
Thanks - your suggestion about $JAVA_HOME lead me to a similar solution:
unset JAVA_HOME
before invoking R.
I came across the same issue, and it worked after running commands below.
export JAVA_LIBS="$JAVA_LIBS -ldl"
R CMD javareconf
See details at
http://www-01.ibm.com/support/knowledgecenter/SSPT3X_3.0.0/com.ibm.swg.im.infosphere.biginsights.install.doc/doc/install_install_r.html
This worked for me on Ubuntu 12.04 and R version 3.0
cd /usr/lib/jvm/java-6-sun-1.6.0.26/include
this is the directory that has jni.h
Next create a soft link to another required header file (I'm too lazy to find out how to include more than one directory in the JAVA_CPPFLAGS option below):
sudo ln -s linux/jni_md.h .
Finally
sudo R CMD javareconf JAVA_CPPFLAGS=-I/usr/lib/jvm/java-6-sun-1.6.0.26/include
below is one of my answers on another post - error: unable to load installed packages just now
(this is also relevant to this question)
For Linux(Ubuntu) users: If you have oracle-java (7/8) installed. It'll be at this location /usr/lib/jvm and sudo access is required.
Create the file /etc/ld.so.conf.d/java.conf with the following entries:
/usr/lib/jvm/java-8-oracle/jre/lib/amd64
/usr/lib/jvm/java-8-oracle/jre/lib/amd64/server
(Replace java-8-oracle with java-7-oracle depending on your java version)
Then:
sudo ldconfig
Restart RStudio and then install the rJava package.
Running R under Gentoo on an AMD64. I upgraded to R 2.12.0
R version 2.12.0 (2010-10-15)
Copyright (C) 2010 The R Foundation for Statistical Computing
ISBN 3-900051-07-0
Platform: x86_64-pc-linux-gnu (64-bit)
and those pesky messages went away.
Jan Vandermeer
I tried to install openjdk-7-* but still I had problems installing rJava. Turns out after I restarted my computer, then there was no problem at all.
so
sudo apt-get install openjdk-7-*
RESTART after installing java, then try to install package "rJava" in R
The rJava package looks for the /usr/lib/jvm/default-java/ folder. But it's not available as default. This folder have a symlink for the default java configured for the system.
To activate the default java install the following packages:
sudo apt-get install default-jre default-jre-headless
Tested on ubuntu 17.04 with CRAN R 3.4.1
What worked for me was changing JAVA_HOME from file /usr/lib/R/etc/javaconf
I first checked what was my version of Java enabled : sudo update-alternatives --config java.
In my case, it was java-8-oracle
I opened the file /usr/lib/R/etc/javaconf and replaced default-java by java-8-oracle :
${JAVA_HOME=/usr/lib/jvm/default-java}
replaced by :
${JAVA_HOME=/usr/lib/jvm/java-8-oracle}
And then sudo R CMD javareconf
I restarted RStudio, and could then install rJava.
what I do is here:
in /etc/apt/sources.list, add:
deb http://ftp.de.debian.org/debian sid main
Note:the rjava should be latest version
2 run:
sudo apt-get update
sudo apt-get install r-cran-rjava
Once update the old version of rjava, then can install rhdfs_1.0.8.
I got it working by downloading : https://cran.r-project.org/src/contrib/rJava_0.9-8.tar.gz and running command R CMD install rJava_0.9-8.tar.gz
I was facing the same problem while using Windows 10. I have solved the problem using the following procedure
Download Java from https://java.com/en/download/windows-64bit.jsp for 64-bit windows\Install it
Download Java development kit from https://www.oracle.com/technetwork/java/javase/downloads/jdk8-downloads-2133151.html for 64-bit windows\Install it
Then right click on “This PC” icon in desktop\Properties\Advanced system settings\Advanced\Environment Variables\Under System variables select Path\Click Edit\Click on New\Copy and paste paths “C:\Program Files\Java\jdk1.8.0_201\bin” and “C:\Program Files\Java\jre1.8.0_201\bin” (without quote) \OK\OK\OK
Note: jdk1.8.0_201 and jre1.8.0_201 will be changed depending on the version of Java development kit and Java
In Environment Variables window go to User variables for User\Click on New\Put Variable name as “JAVA_HOME” and Variable value as “C:\Program Files\Java\jdk1.8.0_201\bin”\Press OK
To check the installation, open CMD\Type javac\Press Enter and
Type java\press enter
It will show
In RStudio run
Sys.setenv(JAVA_HOME="C:\\Program Files\\Java\\jdk1.8.0_201")
Note: jdk1.8.0_201 will be changed depending on the version of Java development kit
Now you can install and load rJava package without any problem.
The problem was rJava wont install in RStudio (Version 1.0.136). The following worked for me (macOS Sierra version 10.12.6) (found here):
Step-1: Download and install javaforosx.dmg from here
Step-2: Next, run the command from inside RStudio:
install.packages("rJava", type = 'source')
On Arch Linux, I needed to install openjdk-src to get a JNI path working.
In other words, these are the packages I needed to install before sudo R CMD javareconf ran successfully:
local/jdk-openjdk 14.0.2.u12-1
OpenJDK Java 14 development kit
local/jre-openjdk 14.0.2.u12-1
OpenJDK Java 14 full runtime environment
local/jre-openjdk-headless 14.0.2.u12-1
OpenJDK Java 14 headless runtime environment
local/openjdk-src 14.0.2.u12-1
OpenJDK Java 14 sources
Assuming you have sudo privileges and not in Ubuntu where package manager makes this easier -- I tried variations of prior answers and found this gem on Databricks blog for nonUbuntu (https://kb.databricks.com/r/install-rjava-rjdbc-libraries.html)
Installed JDK
sudo apt-get install openjdk-8-jdk
Verify path to libjvm.so; for me-->
cd /usr/lib/jvm/java-8-openjdk-amd64/jre/lib/amd64
grep -r libjvm
output:
Binary file server/libjvm.so matches <<<<<<<<
Do java configure
sudo R CMD javareconf
Remove prior versions of the package and install 'rJava' from CRAN mirror in RStudio
Restart RStudio
In RStudio verify link to libjvm.so
dyn.load('/usr/lib/jvm/java-8-openjdk-amd64/jre/lib/amd64/server/libjvm.so')
library('rJava')
I've encountered similar problem on Ubuntu 16.04 and was able to solve it by creating a folder named "default-java" in /usr/lib/jvm and copying into it all the contents of the /usr/lib/jvm/java-8-oracle. I opted for this solution as correcting JAVA_HOME environment variable turned out to be of no use.
I am getting an error while trying to install Rserve 1.8.6. I can successfully install 1.7.3 from CRAN. This is on Mac OS High Sierra.
ld: library not found for -lssl
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make[1]: *** [forward] Error 1
make: *** [all] Error 2
ERROR: compilation failed for package ‘Rserve’
* removing ‘/Library/Frameworks/R.framework/Versions/3.5/Resources/library/Rserve’
* restoring previous ‘/Library/Frameworks/R.framework/Versions/3.5/Resources/library/Rserve’
The downloaded source packages are in
‘/private/var/folders/v7/hyxrfmk94p1_03gdrm27fnxncy3vq1/T/RtmpFHKNMe/downloaded_packages’
This worked for me (MacOS):
In terminal:
brew install openssl
export LIBRARY_PATH=$LIBRARY_PATH:/usr/local/opt/openssl/lib/
I'm running Mac OS 10.15 Catalina, I've spent 2 days trying to fix this same problem, scouring the internet for help. I finally managed it by cobbling together solutions from a few different sources.
The key thing I was missing was that Mac OS ships with its own version of openssl which it thinks is superior to anything else you can find. It is wrong. What you need to do is go and download the latest version of openssl, install that, then export THAT library to your library path variable. Here are the steps I took with openssl 1.1.1:
Get the version number for the latest version of openssl from the source (https://www.openssl.org/source/) and then manually install it directly where it's supposed to go:
cd /usr/local/src
If you're getting "No such file or directory", make it:
cd /usr/local && mkdir src && cd src
Download openssl using curl (shown) or using the link above to the source code (make sure you put the file in the directory you just made in the previous step):
curl --remote-name https://www.openssl.org/source/openssl-1.1.1f.tar.gz
Extract and cd in:
tar -xzvf openssl-1.1.1f.tar.gz
cd openssl-1.1.1f
Compile and install (these are the 64 bit Mac OS instructions. Refer to the openssl documentation for 32 bit and other OS instructions):
./Configure darwin64-x86_64-cc shared enable-ec_nistp_64_gcc_128 no-ssl2 no-ssl3 no-comp --openssldir=/usr/local/ssl/macos-x86_64
make depend
sudo make install
This created a new openssl folder so when you export the library path you have to feed it the right openssl folder:
export LIBRARY_PATH=$LIBRARY_PATH:/usr/local/opt/openssl#1.1/lib/
Hope that helps you if you haven't figured it out yet, and anyone else in the future who is ready to chuck their computer across the room, like I was.
symphony is correctly installed and tested in terminal. R complains about missing header and libraries when trying to install Rsymphony from source. Any pointers are HIGHLY appreciated. thank you!
symphony installation directory: /Users/timo/Applications/symphony/
R install command:
install.packages("Rsymphony", configure.args="--with-SYMPHONY-include=/Users/timo/Applications/symphony/include/ --with-SYMPHONY-lib=/Users/timo/Applications/symphony/lib",type="source")
results in :
* installing *source* package ‘Rsymphony’
** package ‘Rsymphony’ successfully unpacked and MD5 sums checked
Cannot find SYMPHONY libraries and headers.
See <https://projects.coin-or.org/SYMPHONY>.ERROR: configuration failed for package ‘Rsymphony’* removing ‘/Library/Frameworks/R.framework/Versions/3.2/Resources/library/Rsymphony’* restoring previous‘/Library/Frameworks/R.framework/Versions/3.2/Resources/library/Rsymphony’
I also struggled to get Rsymphony installed, but finally got it working after many hours of messing around. Here's what I did, hopefully it'll save others some time. This works on Mac OS El Capitan (10.11) and R 3.3.0.
First, install the homebrew package manager if you don't already have it:
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
Next install SYMPHONY with homewbrew. I found this to be the best approach because it puts everything in the right place:
brew tap coin-or-tools/coinor
brew install symphony
Now install pkg-config, a tool for querying installed libraries for when compiling software source code. Not sure if this is strictly necessary, but pkg-config is used in the configuration script for Rsymphony:
brew install pkg-config
At this point Rsymphony should now be able to find the necessary SYMPHONY libraries, however, I still got the following compiler error:
ld: warning: directory not found for option '-L/usr/local/lib/gcc/x86_64-apple-darwin13.0.0/4.8.2'
ld: library not found for -lgfortran
Apparently it has something to do with needing a different version of the fortran compiler. This helpful post with instructions for getting the correct compiler saved me. Run the following commands:
curl -O http://r.research.att.com/libs/gfortran-4.8.2-darwin13.tar.bz2
sudo tar fvxz gfortran-4.8.2-darwin13.tar.bz2 -C /
Now, finally, you should be able to install Rsymphony with:
install.packages("Rsymphony", type = "source")
SOLUTION:
I have found the solution in this link (...I got RSymphony to install, but it involved some hacking ...)
Installing RSymphony using RStudio on macOS
I had also this issue: ..no checking for COIN-OR package CoinUtils... and it was solved by "export PKG_CONFIG=/usr/local/bin/pkg-config; export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/"
When building the c extensions of readline when installing readline via pip install readline, I get an error message as follows:-
Beginning configuration for readline-6.2 for i386-apple-darwin11.3.0
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name...
configure: error: in `/Users/calvin/.virtualenvs/myproj/build/readline/rl/readline-lib':
configure: error: C compiler cannot create executables
See `config.log' for more details.
============ Building the readline library ============
============ Building the readline extension module ============
running install
running build
running build_ext
building 'readline' extension
Compiling with an SDK that doesn't seem to exist: /Developer/SDKs/MacOSX10.7.sdk
Searching for the location of MacOSX10.7.sdk on my system reveals:-
calvin$ sudo find / -name "MacOSX10.7.sdk"
Password:
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.7.sdk
find: /dev/fd/3: Not a directory
find: /dev/fd/4: Not a directory
Which is not where the readline compilation is expecting.
Is there a bug with how pip locates the MacOSX10.7.sdk?
How do I resolve this without resorting to copying MacOSX10.7 into the /Developer/SDKs directory?
CLARIFICATION
This is how I temporarily solve my problem.
calvin$ sudo mkdir -p /Developer/SDKs/
Password:
calvin$ sudo ln -s /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.7.sdk /Developer/SDKs/MacOSX10.7.sdk
calvin$ pip install readline
But I am not too sure this is the "appropriate" way to solve it as there might be some inherent problems either from how pip is supposed to locate my .sdk location or I am missing something in my system PATH. So any advice on how to resolve this the "appropriate" way would be much appreciated!
That's a good question. As a point of note, I do have a MacOSX10.7.sdk folder in /Developer/SDKs, so perhaps it's your filesystem's state that's wrong.
The safest approach is probably to install XCode, but that's horribly expensive in terms of time. I would start by creating a soft link:
sudo ln -s /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.7.sdk /Developer/SDKs/MacOSX10.7.sdk
and see if that does the trick.
When installing rJava using the install.packages("rJava") command I get the following error:
checking Java support in R... present:
interpreter : '/usr/bin/java'
archiver : '/usr/bin/jar'
compiler : '/usr/bin/javac'
header prep.: '/usr/bin/javah'
cpp flags : '-I/usr/lib/jvm/java-6-sun-1.6.0.20/jre/../include -I/usr/lib/jvm/java-6-sun-1.6.0.20/jre/../include/linux'
java libs : '-L/usr/lib/jvm/java-6-sun-1.6.0.20/jre/lib/amd64/server -L/usr/lib/jvm/java-6-sun-1.6.0.20/jre/lib/amd64 -L/usr/lib/jvm/java-6-sun-1.6.0.20/jre/../lib/amd64 -L -L/usr/java/packages/lib/amd64 -L/usr/lib64 -L/lib64 -L/lib -L/usr/lib -ljvm'
checking whether JNI programs can be compiled... yes
checking JNI data types... configure: error: One or more JNI types differ from the corresponding native type. You may need to use non-standard compiler flags or a different compiler in order to fix this.
ERROR: configuration failed for package ‘rJava’
I have the Java JDK installed and java -version returns the following:
$ java -version
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
When Googling around for the error I see that others are having the same issue but not finding a solution other than "install the whole JDK, not just the JRE" which I have done.
The other thing I read was to run sudo R CMD javareconf which runs quite happily with no errors.
Any ideas what my problem is?
[[EDIT]]
It's been a few months since I had this problem. I had initially solved this by editing my Java paths, as illustrated in the answer I posted below. I recently ran into the same issue on a new Ubuntu install. I tried Dirk's recommendation to use apt-get to install the rJava package. It worked perfectly. What I failed to appreciate initially is that installing packages using the Ubuntu apt-get method is fundamentally different than just loading the same package using install.packages() inside of R. The Ubuntu packages solve some issues which I didn't realize or appreciate.
Wouldn't
apt-get install r-cran-rjava
have been easier? You could have asked me at useR! :)
Turns out my problem was an issue with my JAVA_HOME environment variable. Yes, shocking I know. My initial setting for PATH and JAVA_HOME looked like this:
export JAVA_HOME=/usr/lib/jvm/java-6-sun
export PATH=$PATH:$JAVA_HOME/bin
And I added /jre so it now looks like this:
export JAVA_HOME=/usr/lib/jvm/java-6-sun/jre
export PATH=$PATH:$JAVA_HOME/bin
Everything in Java seemed to work fine without the /jre but rJava would not. Odd.
That is how I make it work :
In Linux (Ubuntu 16.04 and 20.04 worked confirmed)
sudo apt-get install default-jre
sudo apt-get install default-jdk
sudo R CMD javareconf
in R:
install.packages("rJava")
Thanks - your suggestion about $JAVA_HOME lead me to a similar solution:
unset JAVA_HOME
before invoking R.
I came across the same issue, and it worked after running commands below.
export JAVA_LIBS="$JAVA_LIBS -ldl"
R CMD javareconf
See details at
http://www-01.ibm.com/support/knowledgecenter/SSPT3X_3.0.0/com.ibm.swg.im.infosphere.biginsights.install.doc/doc/install_install_r.html
This worked for me on Ubuntu 12.04 and R version 3.0
cd /usr/lib/jvm/java-6-sun-1.6.0.26/include
this is the directory that has jni.h
Next create a soft link to another required header file (I'm too lazy to find out how to include more than one directory in the JAVA_CPPFLAGS option below):
sudo ln -s linux/jni_md.h .
Finally
sudo R CMD javareconf JAVA_CPPFLAGS=-I/usr/lib/jvm/java-6-sun-1.6.0.26/include
below is one of my answers on another post - error: unable to load installed packages just now
(this is also relevant to this question)
For Linux(Ubuntu) users: If you have oracle-java (7/8) installed. It'll be at this location /usr/lib/jvm and sudo access is required.
Create the file /etc/ld.so.conf.d/java.conf with the following entries:
/usr/lib/jvm/java-8-oracle/jre/lib/amd64
/usr/lib/jvm/java-8-oracle/jre/lib/amd64/server
(Replace java-8-oracle with java-7-oracle depending on your java version)
Then:
sudo ldconfig
Restart RStudio and then install the rJava package.
Running R under Gentoo on an AMD64. I upgraded to R 2.12.0
R version 2.12.0 (2010-10-15)
Copyright (C) 2010 The R Foundation for Statistical Computing
ISBN 3-900051-07-0
Platform: x86_64-pc-linux-gnu (64-bit)
and those pesky messages went away.
Jan Vandermeer
I tried to install openjdk-7-* but still I had problems installing rJava. Turns out after I restarted my computer, then there was no problem at all.
so
sudo apt-get install openjdk-7-*
RESTART after installing java, then try to install package "rJava" in R
The rJava package looks for the /usr/lib/jvm/default-java/ folder. But it's not available as default. This folder have a symlink for the default java configured for the system.
To activate the default java install the following packages:
sudo apt-get install default-jre default-jre-headless
Tested on ubuntu 17.04 with CRAN R 3.4.1
What worked for me was changing JAVA_HOME from file /usr/lib/R/etc/javaconf
I first checked what was my version of Java enabled : sudo update-alternatives --config java.
In my case, it was java-8-oracle
I opened the file /usr/lib/R/etc/javaconf and replaced default-java by java-8-oracle :
${JAVA_HOME=/usr/lib/jvm/default-java}
replaced by :
${JAVA_HOME=/usr/lib/jvm/java-8-oracle}
And then sudo R CMD javareconf
I restarted RStudio, and could then install rJava.
what I do is here:
in /etc/apt/sources.list, add:
deb http://ftp.de.debian.org/debian sid main
Note:the rjava should be latest version
2 run:
sudo apt-get update
sudo apt-get install r-cran-rjava
Once update the old version of rjava, then can install rhdfs_1.0.8.
I got it working by downloading : https://cran.r-project.org/src/contrib/rJava_0.9-8.tar.gz and running command R CMD install rJava_0.9-8.tar.gz
I was facing the same problem while using Windows 10. I have solved the problem using the following procedure
Download Java from https://java.com/en/download/windows-64bit.jsp for 64-bit windows\Install it
Download Java development kit from https://www.oracle.com/technetwork/java/javase/downloads/jdk8-downloads-2133151.html for 64-bit windows\Install it
Then right click on “This PC” icon in desktop\Properties\Advanced system settings\Advanced\Environment Variables\Under System variables select Path\Click Edit\Click on New\Copy and paste paths “C:\Program Files\Java\jdk1.8.0_201\bin” and “C:\Program Files\Java\jre1.8.0_201\bin” (without quote) \OK\OK\OK
Note: jdk1.8.0_201 and jre1.8.0_201 will be changed depending on the version of Java development kit and Java
In Environment Variables window go to User variables for User\Click on New\Put Variable name as “JAVA_HOME” and Variable value as “C:\Program Files\Java\jdk1.8.0_201\bin”\Press OK
To check the installation, open CMD\Type javac\Press Enter and
Type java\press enter
It will show
In RStudio run
Sys.setenv(JAVA_HOME="C:\\Program Files\\Java\\jdk1.8.0_201")
Note: jdk1.8.0_201 will be changed depending on the version of Java development kit
Now you can install and load rJava package without any problem.
The problem was rJava wont install in RStudio (Version 1.0.136). The following worked for me (macOS Sierra version 10.12.6) (found here):
Step-1: Download and install javaforosx.dmg from here
Step-2: Next, run the command from inside RStudio:
install.packages("rJava", type = 'source')
On Arch Linux, I needed to install openjdk-src to get a JNI path working.
In other words, these are the packages I needed to install before sudo R CMD javareconf ran successfully:
local/jdk-openjdk 14.0.2.u12-1
OpenJDK Java 14 development kit
local/jre-openjdk 14.0.2.u12-1
OpenJDK Java 14 full runtime environment
local/jre-openjdk-headless 14.0.2.u12-1
OpenJDK Java 14 headless runtime environment
local/openjdk-src 14.0.2.u12-1
OpenJDK Java 14 sources
Assuming you have sudo privileges and not in Ubuntu where package manager makes this easier -- I tried variations of prior answers and found this gem on Databricks blog for nonUbuntu (https://kb.databricks.com/r/install-rjava-rjdbc-libraries.html)
Installed JDK
sudo apt-get install openjdk-8-jdk
Verify path to libjvm.so; for me-->
cd /usr/lib/jvm/java-8-openjdk-amd64/jre/lib/amd64
grep -r libjvm
output:
Binary file server/libjvm.so matches <<<<<<<<
Do java configure
sudo R CMD javareconf
Remove prior versions of the package and install 'rJava' from CRAN mirror in RStudio
Restart RStudio
In RStudio verify link to libjvm.so
dyn.load('/usr/lib/jvm/java-8-openjdk-amd64/jre/lib/amd64/server/libjvm.so')
library('rJava')
I've encountered similar problem on Ubuntu 16.04 and was able to solve it by creating a folder named "default-java" in /usr/lib/jvm and copying into it all the contents of the /usr/lib/jvm/java-8-oracle. I opted for this solution as correcting JAVA_HOME environment variable turned out to be of no use.