I have trouble pulling a docker image from Rstudio using babelwhale libary. I tried running the command below
babelwhale::pull_container("ubuntu:18.04")
But it gave the following error
Got permission denied while trying to connect to the Docker daemon socket at unix:///var/run/docker.sock: Post http://%2Fvar%2Frun%2Fdocker.sock/v1.40/images/create?fromImage=ubuntu&tag=18.04: dial unix /var/run/docker.sock: connect: permission denied
Error in processx::run("docker", c("pull", container_id), echo = TRUE) :
System command error
It seems like you are using RStudio in a unix system which probably requires root access to pull an image from docker. I think you should try launching Rstudio with sudo privilege from the terminal using the command
sudo rstudio
and then rerun the babelwhale function above.
Related
Windows 11 with wsl2 ubuntu-22.04.
In Windows Terminal I open a PowerShell window and start wsl with command:
wsl
Then I start the docker daemon in this window with the following command:
sudo dockerd
It prompts for the admin password, which I enter and then it starts the daemon.
Next I open a new PowerShell window in Windows Terminal, run wsl and run a container to verify everything is working. So far so good.
Now I want to login to Azure Container Registry with the following command:
az acr login -n {name_of_my_acr}
This returns the following error:
You may want to use 'az acr login -n {name_of_my_acr} --expose-token' to get an access token,
which does not require Docker to be installed.
An error occurred: DOCKER_COMMAND_ERROR
error during connect: This error may indicate that the docker daemon is not running.:
Get "http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.24/containers/json":
open //./pipe/docker_engine: The system cannot find the file specified.
The error suggests the daemon is not running, but since I can run a container I assume the deamon is running - otherwise I would not be able to run a container either, right? What can I do to narrow down or resolve this issue?
Docker version info using docker -v command:
Docker version 20.10.12, build 20.10.12-0ubuntu4
An error occurred: DOCKER_COMMAND_ERROR error during connect: This error may indicate that the docker daemon is not running.: Get"http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.24/containers/json": open //./pipe/docker_engine: The system cannot find the file specified.
The above error due to some times docker might be disabled from starting on boot or login.
The following suggestion can be used:
Open the Powershell and type dockerd which will start the daemon.
Open the docker with run as administrator and run the command as below :
C:\Program Files\Docker\Docker\DockerCli.exe -SwitchDaemon
Check the version of WSL2, if it is older it might be a problem and then download the latest package WSL2 Linux kernel update package for x64-bit machines in the windows 11.
Reference:
Manual installation steps for older versions of WSL | Microsoft Docs
whn I try to connect windows server from my unix manually I am able to get the file .
sshpass -p "passwd" sftp username#hosname:path
get filnename unipath
I tired above lines manually and I am able to pull file to my unix path .When tried executing same commands via shell script its throwing below error. Can some one help me .
SSHPASS: Failed to run command: No such file or directory
I wanted to launch the jenkins which is installed through docker automatically in browser.. im working on windows os. in docker base os is ubuntu.. then i used solution from this link1.now im getting following error when i ssh using -v command i find that "read_passphrase: can't open /dev/tty: No such device or address"
by going through many websites i have created ssh file through windows using gitbash it contains id_rsa,id_rsa.pub,known_hosts files.
Now what should i do to launch the jenkins file in browser which is build using docker
I'm just going to address the error message you pasted for now.
ssh is trying to get keyboard input for the passphrase on your private key, but can't open the terminal correctly. Are you running the ssh command directly in the terminal, or from a script? If not, try running ssh directly. If you need to run ssh from a script:
Maybe try with keys that don't have a passphrase.
If you can use ssh-agent: Run eval $(ssh-agent), then run ssh-add and enter your passphrase. ssh will no longer prompt for a passphrase now.
Prog:dist abhishek$ composer network deploy -a my-network.bna -p hlfv1 -i PeerAdmin -s randomString
Deploying business network from archive: my-network.bna
Business network definition:
Identifier: my-network#0.1.6
Description: My Commodity Trading network
✖ Deploying business network definition. This may take a minute...
Error: Error trying deploy. Error: Error trying install composer runtime. Error: Connect Failed
Command failed
when trying to install the composer runtime,returns
Prog:dist abhishek$ composer runtime install -n my-network -p hlfv1 -i PeerAdmin -s randomString
✖ Installing runtime for business network my-network. This may take a minute...
Error: Error trying install composer runtime. Error: Connect Failed
Command failed
I've been working through the Hyperledger Composer tutorial (https://hyperledger.github.io/composer/tutorials/developer-guide.html) on an older Mac, running OS X Mavericks 10.9.5, which means I'm using Docker Toolbox instead of Docker for Mac. I encountered the same error message when deploying the sample Trading network .bna file on my local dev environment Fabric network.
Here is the command in Terminal:
$ composer network deploy -a my-network.bna -p hlfv1 -i PeerAdmin -s randomString -A admin -S
And here is the error log:
Error: Error trying deploy. Error: Error trying install composer runtime. Error: Connect Failed
In my case, it was because Docker Toolkit answers to on an IP address assigned when you start docker, instead of localhost, 127.0.0.1, etc.
If you are also using Docker Toolkit and are getting the same error, first find the docker IP number, which should be listed under the Docker Whale logo in Terminal when you started it, and then edit the following files (TextEdit should be fine), changing all references to localhost and 127.0.0.1 to the IP number (leave the ports, such as :7050, there):
fabric-tools/fabric-scripts/hlfv1/composer/configtx.yaml
fabric-tools/fabric-scripts/hlfv1/composer/docker-compose.yml
fabric-tools/fabric-scripts/hlfv1/createComposerProfile.sh
fabric-tools/fabric-scripts/hlfv1/createPeerAdminCard.sh
Then, back in Terminal, navigate back to fabric-tools, and if Fabric is already started, stop it, and then recreate the Composer Profile, as documented:
$ ./stopFabric.sh
$ ./createComposerProfile.sh
The log should now show the Docker Toolkit IP for the orderers, CA and peers. Now restart Fabric:
$ ./startFabric.sh
Navigate back to fabric-tools/my-network/dist and re-run the compose command, and if all goes well, it should connect properly.
Is your Fabric running? What is the output of docker ps?
Try doing the next:
Pick a directory that you want and install Hyperledger Fabric and Hyperledger Composer Playground running:
curl -sSL https://hyperledger.github.io/composer/install-hlfv1.sh | bash
Then run your command.
Try the code below:
$composer runtime install -c PeerAdmin#hlfv1 -n basic
$composer network deploy -a basic.bna -A admin -S adminpw -c PeerAdmin#hlfv1 -f admincard
I am trying to run rsync as follows and running into error sshpass: Failed to run command: No such file or directory .I verified the source /local/mnt/workspace/common/sectool and destination directories/prj/qct/wlan_rome_su_builds are available and accessible?what am I missing?how to fix this?
username#xxx-machine-02:~$ sshpass –p 'password' rsync –progress –avz –e ssh /local/mnt/workspace/common/sectool cnssbldsw#hydwclnxbld4:/prj/qct/wlan_rome_su_builds
sshpass: Failed to run command: No such file or directory
Would that be possible for you to check whether 'rsync' works without 'sshpass'?
Also, check whether the ports used by rsync is enabled. You can find the port info via cat /etc/services | grep rsync
The first thing is to make sure that ssh connection is working smoothly. You can check this via "sudo ssh -vvv cnssbldsw#hydwclnxbld4" (please post the message). In advance, If you are to receive any messages such as "ssh: connect to host hydwclnxbld4 port 22: Connection refused", the issue is with the openssh-server (not being installed or a broken package). Let's see what you get you get for the first command