Error: package or namespace load failed for ‘intsvy’ - r

Question

I am using RStudio Version 1.0.136 – © 2009-2016 RStudio, Inc. I checked for a new update and I received a massege that saying "You're using the newest version of RStudio".
Here I am trying to use R ‘intsvy’ package.
I started by setting up the directory.
Then, first I installed the package by using the following code:
install.packages("intsvy", lib="/Library/Frameworks/R.framework/Versions/3.3/Resources/library")
Below is the Console results
There is a binary version available but the source version is later:
binary source needs_compilation
intsvy 2.1 2.4 FALSE
installing the source package ‘intsvy’
trying URL 'https://cran.rstudio.com/src/contrib/intsvy_2.4.tar.gz'
Content type 'application/x-gzip' length 56777 bytes (55 KB)
==================================================
downloaded 55 KB
starting R..
* installing *source* package ‘intsvy’ ...
** package ‘intsvy’ successfully unpacked and MD5 sums checked
** R
** data
*** moving datasets to lazyload DB
** inst
** preparing package for lazy loading
Error in loadNamespace(j <- i[[1L]], c(lib.loc, .libPaths()), versionCheck = vI[[j]]) :
there is no package called ‘repr’
ERROR: lazy loading failed for package ‘intsvy’
* removing ‘/Library/Frameworks/R.framework/Versions/3.3/Resources/library/intsvy’
* restoring previous ‘/Library/Frameworks/R.framework/Versions/3.3/Resources/library/intsvy’
Warning in install.packages :
installation of package ‘intsvy’ had non-zero exit status
The downloaded source packages are in
‘/private/var/folders/jj/3brk8hp91ps2mdv6gzlynh6r0000gn/T/RtmppVfRws/downloaded_packages’
Second, I installed the package by using the following code after receiving the above long massage:
install.packages("intsvy")
Below is the Console results
Installing package into ‘/Users/HU-Hisham/Library/R/3.3/library’
(as ‘lib’ is unspecified)
There is a binary version available but the source version is later:
binary source needs_compilation
intsvy 2.1 2.4 FALSE
installing the source package ‘intsvy’
trying URL 'https://cran.rstudio.com/src/contrib/intsvy_2.4.tar.gz'
Content type 'application/x-gzip' length 56777 bytes (55 KB)
==================================================
downloaded 55 KB
starting R..
* installing *source* package ‘intsvy’ ...
** package ‘intsvy’ successfully unpacked and MD5 sums checked
** R
** data
*** moving datasets to lazyload DB
** inst
** preparing package for lazy loading
Error in loadNamespace(j <- i[[1L]], c(lib.loc, .libPaths()), versionCheck = vI[[j]]) :
there is no package called ‘repr’
ERROR: lazy loading failed for package ‘intsvy’
* removing ‘/Users/HU-Hisham/Library/R/3.3/library/intsvy’
Warning in install.packages :
installation of package ‘intsvy’ had non-zero exit status
The downloaded source packages are in
‘/private/var/folders/jj/3brk8hp91ps2mdv6gzlynh6r0000gn/T/RtmppVfRws/downloaded_packages’
Next #load backage
library("intsvy")
Below are the massages I received in the Console
Error in loadNamespace(j <- i[[1L]], c(lib.loc, .libPaths()), versionCheck = vI[[j]]) :
there is no package called ‘repr’
In addition: Warning message:
package ‘intsvy’ was built under R version 3.3.2
Error: package or namespace load failed for ‘intsvy’
After installations, I tried to run the following command
pirls.var.label(folder = getwd("~/Desktop/Dr. Kato/Data/PISA/CY07_MSU_STU_QQQ.sav"),
+ name = "Variable labels", output = getwd())
Here is the massage
Error: could not find function "pirls.var.label"
Function pirls.var.label is one of the functions in the 'intsvy' package.
Why am I receiving this error? Is it because the package not successfully installed? How can I take care or this matter and start using the package and data? Please advice.
I updated my R version from R3.3.1 (2016-06-21) to R3.6.2 (2019-12-12)as some experts recommended.
Then I run the commands again after restarting R:
1 installing repr package
> install.packages("repr")
Warning in install.packages :
cannot open URL 'https://cran.rstudio.com/bin/macosx/el-capitan/contrib/3.6/PACKAGES.rds': HTTP status was '404 Not Found'
trying URL 'https://cran.rstudio.com/bin/macosx/el-capitan/contrib/3.6/repr_1.0.2.tgz'
Content type 'application/x-gzip' length 118906 bytes (116 KB)
==================================================
downloaded 116 KB
The downloaded binary packages are in
/var/folders/jj/3brk8hp91ps2mdv6gzlynh6r0000gn/T//Rtmpt0mup2/downloaded_packages
Warning message:
R graphics engine version 12 is not supported by this version of RStudio. The Plots tab will be disabled until a newer version of RStudio is installed.
2 installing intsvy package
> install.packages("intsvy", dependencies = T)
trying URL 'https://cran.rstudio.com/bin/macosx/el-capitan/contrib/3.6/intsvy_2.4.tgz'
Content type 'application/x-gzip' length 336356 bytes (328 KB)
==================================================
downloaded 328 KB
The downloaded binary packages are in
/var/folders/jj/3brk8hp91ps2mdv6gzlynh6r0000gn/T//Rtmpt0mup2/downloaded_packages
load backage
> library("intsvy")
Error: package or namespace load failed for ‘intsvy’:
.onLoad failed in loadNamespace() for 'pillar', details:
call: utils::packageVersion("vctrs")
error: there is no package called ‘vctrs’
> library(intsvy)
Error: package or namespace load failed for ‘intsvy’:
.onLoad failed in loadNamespace() for 'pillar', details:
call: utils::packageVersion("vctrs")
error: there is no package called ‘vctrs’
Still same errors when I try to run the package commands
> pisa.var.lable(folder="~/Desktop/Dr. Kato/Data/PISA/CY07_MSU_STU_QQQ.sav")
Error in pisa.var.lable(folder = "~/Desktop/Dr. Kato/Data/PISA/CY07_MSU_STU_QQQ.sav") :
could not find function "pisa.var.lable"
> pirls.var.label(folder = getwd("~/Desktop/Dr. Kato/Data/PISA/CY07_MSU_STU_QQQ.sav"),
+ name = "Variable labels", output = getwd())
Error in pirls.var.label(folder = getwd("~/Desktop/Dr. Kato/Data/PISA/CY07_MSU_STU_QQQ.sav"), :
could not find function "pirls.var.label"
If you have an idea, please share it here so I can try it to solve this issue and start using the package and PISA data.
Thank you