error: Unknown module(s) in QT: qml quick
I do see quite few relevant topics, but none of them solves my problem.
I have Qt CReator 4.5.2 and QT 5.9.5.
While building the QT's virtual keyboard example, I run into this issue. The host environment is Ubuntu 14.04.4 and for it, the example builds and runs properly. However when I try to build it for my target, a TI board, I have run into this issue. I understand my build for cross compiling QT is fine. I have built qtdeclarative module as well.
Any help is appreciated
I found an answer at the link
The last comment helped.
It is suggested to used the qmake from sysroot instead of build folder; in my case it was
/home/abu/targetfs/usr/local/qt595/bin/qmake
Now at least it builds for target.
Related
I installed qt creator and qt 3dstudio with the qtOnline installer for linux. I want to build a project using these two packages. I design my project in qt3dstudio and then I use qtcreator to code the logic of the program. But I cannot import qt3dstudio module into the code.any suggestions??
I need to get this going on ubuntu 16.04LTS. I couldn't find anything useful on the web about the problem. I did try to build qt3dstudio but some of the dependencies caused my ubuntu desktop to stop working and I had to reinstall ubuntu.
QT modules in my .pro file:
QT += widgets qml quick gui 3dstudioruntime2
and when I hit build I get the following error:
Unknown module(s) in QT: 3dstudioruntime2
I have installed Shadowsocks-Qt5 within the code sudo apt-get install shadowsocks-qt5 in terminal, and then I can find the launch icon by searching, but it won't open when I click the icon. Then I tried to use terminal to open it, but the error comes out as below:
~ ss-qt5
Cannot mix incompatible Qt library (version 0x50501) with this library (version 0x50201)
[1] 8875 abort (core dumped) ss-qt5
I searched many answers but no one work. I think the key may be the default Qt library, but I don't know how to set default Qt library, the system on my computer is Ubuntu 14.04 LTS.
How to solve this problem?
I just had this error when attempting to run Qt Creator after doing a system update. For me, I was attempting to run Qt Creator 4.10.0-rc1 (based on Qt 5.13.1) that I had manually installed to ~/Qt along with Qt 5.13.0, and my system has Qt 5.12.2 installed.
I was getting the following error:
Cannot mix incompatible Qt library (version 0x50c02) with this library (version 0x50d00)
Doing an strace when running qtcreator.sh revealed that it was attempting to load plugins from the system directory. I finally discovered the culprit was the environment variable QT_PLUGIN_PATH was set (in my case to /usr/lib64/qt5/plugins:/usr/lib64/qt5/plugins/kcms).
After unsetting this variable, Qt Creator started up and worked.
After so many months of trying to fix this issue, this helped me.
sudo apt install qt5-style-plugins.
I was facing a similar issue, and even after 4 hours of debugging, I got nowhere. Finally, I found the following way to keep separate Qt versions, posting here so that other people find it.
Suppose you installed Qt in ${QtRoot}, extend the PATH and LD_LIBRARY_PATH:
export PATH=${QtRoot}/bin:${PATH}
export LD_LIBRARY_PATH=${QtRoot}/lib:${LD_LIBRARY_PATH}
You can make a wrapper function / script to manage separate Qt installations like this:
QtVersion=5.12.8
QtRoot="/scratch/Qt/${QtVersion}/gcc_64"
export PATH=${QtRoot}/bin:${PATH}
export LD_LIBRARY_PATH=${QtRoot}/lib:${LD_LIBRARY_PATH}
After running this your application will likely run fine.
Sorry, this may be a dumb question, but I'm totally new in QT, I just need to run a project and Log some data.
I installed Qt "qt-unified-windows-x86-2.0.3-2-online", open the project and then click on configure, and then I got this error:
Unknown module(s) in QT: declarative
which wont let me compile the code. Everything else looks fine.
From researching I get that I may lack some libraries, I'm using windows, How do I get the proper library in windows? which is the library I need?
I'm using "Qt Creator user the kit Desktop Qt 5.7.0 MinGW 32bit."
Thank you.
I'm downloading linux, a live version, to try to run the code in there
The error occurs when trying to build a project that depends on the deprecated QtDeclarative module on Qt version 5.6 and later, as the module was removed in version 5.6.
The source code for the module is still available you can compile it from source. Or you can install a Qt version below Qt 5.6 to build the project.
You probably don't have declarative library installed somehow, here it is recommended to use a command-line utility named windeployqt, something like
windeployqt -declarative
I am trying to install kde-connect following this.
Although my kubuntu version is 14.04, I wanted to compile them so that I can have the latest version. But when I followed the instructions to compile, i get the following error.
-- Found Qt-Version 5.2.1 (using /usr/bin/qmake)
CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
Please set them or make sure they are set and tested correctly in the CMake files:
QT_QT_INCLUDE_DIR
used as include directory in directory /home/vinaychandra/Downloads/t/CMakeFiles/CMakeTmp
CMake Error: Internal CMake error, TryCompile configure of cmake failed
CMake Error at /usr/share/kde4/apps/cmake/modules/FindKDE4Internal.cmake:1311 (message):
Unable to compile a basic Qt application. Qt has not been found correctly.
Call Stack (most recent call first):
/usr/share/cmake-2.8/Modules/FindKDE4.cmake:95 (find_package)
CMakeLists.txt:7 (find_package)
Please point out how to correct this.
I have tried giving -DQT_QT_INCLUDE_DIR=/usr/share/qt4/
then it tells that You must build your code with position independent code if Qt was built with -reduce-relocations.
Your cmake by default uses a different QT version.
So, you must explicitly tell him which version of QT he have to use for this job.
This one
-DQT_QT_INCLUDE_DIR=/usr/share/qt4/
Is wrong because you mustn't give QT position explicitly.
All you need is to use the right qmake.
So, give'em this flag and you'll be happy!
-DQT_QMAKE_EXECUTABLE=/usr/bin/qmake-qt4
Since most of kde applications are not ported to Qt5, you need Qt4.x for building kdeconnect(don't know x, mine is 4.8.6).
Also Qt4 installer is not available (I think !), so you have to build it also from source. Building Qt4 is quite easy, just download the source and run the usual commands.
After building it, it qmake name will be qmake-qt4 in /usr/bin.
So for building kdeconnect, first run its cmake, then a Cmaketextcache.txt file will form.
In that change the path of qmake (i.e somewhere written /usr/bin/qmake to /usr/bin/qmake-qt4) and also the path of qt include dir to (I think /usr/include/qt5 to /usr/include/qt4), and run the cmake again.
If some packages are missing, then you have to install it.
But with the above changes, you will get a make file to install it.
Unfortunately, the cited documentation is lagging behind the current state of kdeconnect. I ran into similar problems but I managed to solve them by installing the following required packages from the Kubuntu repositories:
sshfs
libfakekey-dev
libxtst-dev
libqca2-dev
libqjson-dev
I trust these are all of them. I installed kdeconnect from the latest git commit and it seems to run fine.
This answer comes a bit late, but this is the first Google search result for the question. In systems with qtchooser (Kubuntu, Ubuntu at least), this can be fixed by running first:
export QT_SELECT=qt4
This makes all of the Qt build tools to default to the Qt4 version instead of Qt5. You can check which Qt version is active by running:
qmake --version
Try kde connect install on ubuntu: https://fazlerabbi37.github.io/blogs/install_kde_connect_in_ubuntu_18.04.html
(in 18.04 & 19.04 it works with simple sudo apt install kdeconnect
Install kde connect on android device (google play store is where I installed from)
Invoke kde connect from desktop
Invoke kde connect from android and search device.
Your ubuntu will be found / initiating a search from desktop results in android phone pulled up for pairing
Accept pairing request
Provide access to folders
Try clicking on a video/image file for transfer
I could see the new file transferring in /Downloads folder of desktop
allowing/disallowing desktop to access sms, notifications etc are now a choice
Note: Pl treat this with pinch of salt. This appears very simple, effective for a main reason it worked for me in no time.
I just updated my Qt to 4.8.3, because the program built from older version is not compatible to the new framework.
So I have to upgrade.
This process was frustrating and time consuming. So many problems came out.
I download Qt from this url:
http://qt-project.org/downloads
At beginning, I installed the MinGW one (I'm not a fan of MSVC).
I tried the newest ( I think it's 4.6) version of MinGW and order version (4.4).
However, after I installed MinGW and tried to install Qt 4.8.3, during the process, the following message shows up:
There is a problem with your MinGW installation:
The installer could not find a valid C:\MinGW\include\w32api.h (Only versions with W32API 3.13 are supported)
Do you still want to continue? (Your installation may not work)
The 4.6 version does have this w32api.h file, I don't know what's going on. And I have trouble finding MinGW 4.4 with this head file.
I decide to ignore this warning and continue to install Qt and Qt creator. After that,
I opened my current project, configure it (why the configuration become so complex...), I tried to build it.
Then the following message shows up because some external lib I used requires Exception Handling:
exception handling disabled, use -fexceptions to enable
And I don't know how to enable the it.
I tried to add -fexceptions flag in QMAKE_CXXFLAGS but it doesn't work.
By the way, I tried the VC version of Qt too, but I used the MinGW before and the VC compiler is quite different, if I use VC version, it will take a lot of time to make it compilable by VC compiler.
Does anyone know how to install Qt 4.8.3 on Windows? my project works fine before, now I just want to compile it successfully.......
These are not the only problem.
I updated the Qt on Mac machine too, it is easier to have the compiler work since it's unix base.
However, I used QtWebkit lib in my project and obviously, they changed this lib and it's not compatible to order version.
I can compile my project on Mac, however, every time I run it, following massage shows up and the program stopped.
dyld: Symbol not found: _OBJC_CLASS_$_CALayerHost Referenced from:
/Library/Frameworks/QtWebKit.framework/Versions/4/QtWebKit Expected
in:
/System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
The program has unexpectedly finished.
Does any one know how to solve this QtWebKit problem? I'll really appreciate.
I remembered that when Qt is under nokia, it's so easy to install and use, the Qt SDK is perfect.
I really hate the change made after it was bought by digia.........
I found solutions of my first two problems:
for the first problem, as I described, download the MinGW provided by Nokia Qt
ftp.qt.nokia.com/misc/MinGW-gcc440_1.zip [ftp.qt.nokia.com]
Tried several versions of MinGW 4.4, I think this is the only one works.
About the second problem, add following configure in the project file:
CONFIG += exceptions
Now the QWebKit problem is only one unsolved.
Is it all relevant that your include directory for MinGW has two "i's" in it or was that a typographic error when posted on SO? See:
The installer could not find a valid C:\MinGW\iinclude\w32api.h